The document is a quiz question asking to calculate the factored (ultimate) moments for a reinforced concrete continuous slab supported by beams, given the slab and beam dimensions, load details including dead and live loads, and directed to use ACI Code coefficients for the calculations. The slab is 125mm thick and supported by a series of 300mm wide beams spaced at 2.8m, 2.9m, 6.1m, and 6.2m, under 1.5kPa dead and 4kPa live loads.
The document is a quiz question asking to calculate the factored (ultimate) moments for a reinforced concrete continuous slab supported by beams, given the slab and beam dimensions, load details including dead and live loads, and directed to use ACI Code coefficients for the calculations. The slab is 125mm thick and supported by a series of 300mm wide beams spaced at 2.8m, 2.9m, 6.1m, and 6.2m, under 1.5kPa dead and 4kPa live loads.
The document is a quiz question asking to calculate the factored (ultimate) moments for a reinforced concrete continuous slab supported by beams, given the slab and beam dimensions, load details including dead and live loads, and directed to use ACI Code coefficients for the calculations. The slab is 125mm thick and supported by a series of 300mm wide beams spaced at 2.8m, 2.9m, 6.1m, and 6.2m, under 1.5kPa dead and 4kPa live loads.
Majmaah University - College of Engineering - Civil and Environmental Engineering Department
Quiz – 24 Dated: Course Title:
Name: I.D #:
Q.: A reinforced concrete continuous slab is supported on a series of beam as
shown below. The slab thickness = 125 mm, finishing DL =1.5 kPa and working LL = 4 kPa, calculate the factored (ultimate) moments for the slab and the intermediate beam using the ACI Code coefficients. Beam dimensions bw = 300 mm, and h= 450 mm. 300 6.10 m 300 6.20 m 300 300 2.80 m 300 2.9 m 300