The document describes the design of a sludge stabilization unit and sludge drying beds for a water treatment system. The sludge stabilization unit uses anaerobic digestion with a 5.5 meter vertical side depth and 11 day digestion period. The sludge drying bed design calculates that with 2500 kg of sludge applied per day, providing 75 beds of 11m x 7m size (5775m2 total area) will be sufficient based on a 0.3m sludge layer over 35 cycles per year.
The document describes the design of a sludge stabilization unit and sludge drying beds for a water treatment system. The sludge stabilization unit uses anaerobic digestion with a 5.5 meter vertical side depth and 11 day digestion period. The sludge drying bed design calculates that with 2500 kg of sludge applied per day, providing 75 beds of 11m x 7m size (5775m2 total area) will be sufficient based on a 0.3m sludge layer over 35 cycles per year.
The document describes the design of a sludge stabilization unit and sludge drying beds for a water treatment system. The sludge stabilization unit uses anaerobic digestion with a 5.5 meter vertical side depth and 11 day digestion period. The sludge drying bed design calculates that with 2500 kg of sludge applied per day, providing 75 beds of 11m x 7m size (5775m2 total area) will be sufficient based on a 0.3m sludge layer over 35 cycles per year.
Registration Number: - 18MEE0025 Course code: -CLE5005 SLUDGE STABILIZATION UNIT Provide anaerobic sludge stabilization of organic solids High rate anaerobic digesters (Temp . 35º C) Provide a 1m depth for grit accumulation in the bottom Provide a 0.6m depth for the scum blanket Provide a 0.6m minimum clearance between the floating cover and maximum digester level. Total inactive cone depth =1m Total inactive upper depth of digester =0.6m +0.6m =1.2m
Provide the active side water depth of 5m
Provide the diameter of digester = 2m Provide the vertical side depth = 5.5m Provide the digestion period of 11 days
DESIGN OF SLUDGE DRYING BEDS
Sludge applied to drying beds at 100 kg/MLD Sludge applied = 2500 kg/day Specific gravity =1.015 Solid content = 1.5% 2500 Volume of sludge = [ ] × [1 ÷ (1000 × 1.015)] = 164.2 M3/day 1.5
Considering monsoon etc. , the total number of cycle in one year = 35
Period of each cycle = 365 ÷ 35 = 10.5 𝑑𝑎𝑦𝑠 Volume of sludge /cycle = 164.2 × 10.5 = 1724.1 𝑚3 Spreading a layer of 0.3m/cycle area of beds required = 1724.1 ÷ 0.3 = 5747 𝑚2 Provide 75 beds of 11m x 7m Thus providing 5775m2 area provide a wet well of size 1.5m x 2m with a liquid depth of 1m.