Professional Documents
Culture Documents
"90" should be shown in the display with A4 size paper and "63" with B4 size one..
TEST MODE
Ver 1.23 SYSTEM 0
4.56 PANEL
( Test mode is started up )
TEST MODE
Ver 1.23 SYSTEM 91
4.56 PANEL
( Select Test mode No.91 )
TEST MODE
A/D DATA 67
91
The value given by the settings of the Paper
size potentiometer and HEX SW7.
"90" should be shown for A4 size paper.
3. If a different number is shown, turn the HEX SW7 until "90" appears in the display.
TEST MODE
A/D DATA 90
91
4. To exit from Test mode No.91, press "START" key.
The display on the Panel returns to the initial condition.
- Note -
• The actual width of master making will be 2mm narrower on Paper size Correct value
each side, compared to the original.
• Turning SW7 to a larger number will increase the Master A3 (297mm) 3C
making width.
B4 (257mm) 63
Turning it to a smaller number will decrease the width.
• One notch of SW7 will change the Master making width by A4 (210mm) 90
1mm.
B5 (181mm) Ad
A5 (148mm) Cd