Professional Documents
Culture Documents
Application DIN 2303
Application DIN 2303
Company: Telephone
Street, No.: Fax No.:
ZIP code, place: Email:
Owner of the company: http://
For queries: Tech. manager:
The application is made for workshop / plant (s):
(Only fill in if different from the a.m.)
Street, No.:
ZIP code, place:
With regard to the following range of application (for selection insert x!):
Existing approvals (e.g. DIN EN ISO 3834, DIN 18800, DIN 6700 etc.)
The company confirms to agree that the technical data of this application are recorded and that the copy and the scope of application of the company
will be indexed under the condition that the company has got the approval of manufacturer qualification for welding.
____________________________________ ____________________________________
(Place, date) (Stamp, signature)
1.4 Consumables for welding, brazing and thermal spraying and auxiliary materials
(e.g. covered electrodes acc. to DIN EN ISO 2560, welding flux acc. to DIN EN 760)
1.5 Particularities
1
Please submit PQR’s for welding procedure as enclosure.
Company: Workshop description Shop inspection
(to fill in by the applicant) (do not fill in)
2 Technical staff
2.3 Personal in welding, brazing and thermal spraying, who are permanently employed in
the company:
2
Photocopies of certificates or copies of certificates are to be enclosed.
3
In case of several deputies in formless enclosure
Page 4
Company: Workshop description Shop inspection
(to fill in by the applicant) (do not fill in)
The originals of the test certificates, e.g. according to DIN EN 287-1, are to be presented
during the workshop inspection.
3 Workshop facilities
4
Photocopies of test certificates or relevant list of valid tests.
5
Photocopies or copies of certificates (evidence of qualification) are to be submitted.
Company: Workshop description Shop inspection
(to fill in by the applicant) (do not fill in)
3.2 Size of workshop (s) for welding / brazing / spraying Total ca. m²
Welding jigs
3.7 (e.g. turn table, turning stations, special and universal tack welding devices):
3.11 Particularities
(e.g. pickling lines, wet compressed air blasting):
2. Are the subcontractors for welding works selected and controlled according
the requirements of DIN EN ISO 3824-2 and -3., respectively?
3. Specify the personnel of the company for quality inspections and their
qualification.
Are inspectors and NDT testing staff appointed on welding works?
10. Are there quality reports and how does the evaluation and filing of quality
reports take place?