Professional Documents
Culture Documents
Launching apron
No of aprons 0
Length of apron 64.5 m
Width of apron 0m
Depth of apron 0m
Retaining wall(Part 2)
No 0
Length 2.397
Ht above GL 5.46
Depth of foundation 0 5
Height of wall 5.46 4.4
Topwidth 0
below Wall 0.00
heel 0.00
Toe 0.00
Total width 0.00
uniform depth 0
Varying depth 0
Retaining wall(Part 1) Column at end of return wall
No 4 4
Length 4.500 1
width 0.650 0.6
Depth 10.750 10.750
Flywing
No 4
Length 4.000 m
width 0.500 m
Depth1 0.500 m
Depth2 2.640 m
DETAILED ESTIMATION
Item
Description Unit No L B D Quantity
No.
6.01 Earthwork in excavation of foundation for structures
complete as per drawing and Technical Specification
Clause 304 including all Leads and Lifts
Total = 1582
6.02 Providing Back filling for quadrants, with selected
imported granular material of approved quality
including all leads and lifts complete as per Technical
Specification Clause 305.
PCC-M15 grade
Open foundation
Abutments Cum 2 9.700 12.200 0.150 36
Piers Cum 0 0.200 0.200 0.150 0
Pile foundation
Abutments Cum 0 0.200 0.200 0.150 0
Piers Cum 0 0.200 0.200 0.150 0
Total = 36
6.05 Providing and laying Reinforced cement concrete for
foundations complete as per drawing and Technical
Specifications Section 1500,1700, 2100 & 2200
RCC-M35
Open foundation
Abutment -Uniform width Cum 2 9.500 12.000 1.000 228
Abutment-- Varying width Cum 2 5.400 12.000 0.500 65
Pier-Uniform width Cum 0 0.000 0.000 0.000 0
Pier-- Varying width Cum 0 Vol = 0.000 0
Pier Pedestals Cum 0 0.250 0.250 0.000 0
Pile foundation
Abutments Cum 0 0.000 0.000 0.000 0
Piers Cum 0 0.000 0.000 0.000 0
Total = 293
HYSD bar reinforcement (Fe 500 gr)complete as per
drawing and Technical Specification clause no 1600.
Mt At 65kg per m3 of concrete 19
6.06 Structural Cement concrete for Reinforced cement
concrete for Sub structure including centering complete
as per drawing Technical specification clauses
1500,1700,2200
RCC-M35
Open foundation
Abutments (Wall type) Cum 2 12.000 1.200 7.935 229
Piers (Wall type) Cum 0 0.000 0.000 31.935 0
Piers _Cutwaters Cum 0 Area = 0.000 31.935 0
Pile foundation
Abutments (Wall type) Cum 0 0.00 0.00 31.435 0
Piers (Wall type) Cum 0 0.00 0.00 31.735 0
Piers _Cutwaters Cum 0 Area = 0.000 31.735 0
Abutmentcap Cum 2 1.200 12.000 0.300 9
Dirt wall Cum 2 12.000 0.300 2.265 16
Bracket Cum 2 11.350 0.300 0.450 2.55
Retaining wall (Part-1) Cum 4 4.500 0.650 10.750 126
Piercap (uniformportion) Cum 0 0.000 0.000 0.000 0
Piercap (Varyingportion) Cum 0 0.000 0.000 0.000 0
Bearing pedestals Cum 8 0.800 0.620 0.300 1
Retaining wall part2 Cum 0 2.397 0.000 5.465 0
Flywing Cum 4 4.000 0.500 1.570 13
Column at returnwall part-1 Cum 4 1.000 0.600 10.750 26
Median wall Cum 0 0.00 0.000 5.465 0
Total = 421
HYSD bar reinforcement (Fe 500 gr)complete as per
drawing and Technical Specification clause no 1600.
Mt At 110kg per m3 of concrete 46
6.07 Structural Cement concrete for Reinforced cement
concrete/PSC Super structure including centering
complete as per drawing Technical specification
clauses 809,1500,1700
PSC-M45
Deck slab Cum 1 24.600 12.000 0.250 74
Longitudinal girders (End section) Cum 8 1.800 Area = 1.240 18
Longitudinal girders (Tapering section) Cum 8 1.500 Area = 1.003 12
Longitudinal girders (Mid section) Cum 4 17.600 Area = 0.765 54
Cross girders Cum 2 6.600 0.300 1.300 5
Total = 163
HYSD bar reinforcement (Fe 500 gr)complete as per
drawing and Technical Specification clause no 1600.
Mt At 140kg per m3 of concrete 22.8
6.08 HT Steel for PSC concrete complete as per drawing and
Technical Specification 1800,1009 Mt At 35kg per m3 of concrete 5.7
6.09 Providing, cutting, bending and fixing in position of
TMT bar reinforcement(Fe 500 gr) in reinforced
concrete structure complete as per drawing and
Technical Specification Section 1600
Mt (foundation+substr+super stru.) 88
6.10 Providing bored cast-in-situ M35 grade RCC piles
excluding reinforcement complete as per drawings and
technical specifications and removal of excavated earth
with all lifts and lead up to 1000 m(pile dia 1200mm)
Bill 7-ROB
Item Description Unit Total Qty Rate Amount
No.
7.01 Earthwork in excavation of foundation for structures
complete as per drawing and Technical Specification Clause
304 including all Leads and Lifts
0
PCC M20 Cum 0 5676 0
RCCM35 Cum 1661 6460 10728445
7.06 Structural Cement concrete for Reinforced cement
concrete for Sub structure / Side walls of Box including
centering complete as per drawing Technical specification
clauses 1500,1700,2200
0
RCC M35 Cum 1789 7187 12858815
7.07 Structural Cement concrete for Reinforced cement
concrete / PSC Super structure / Top slab of Box /
Precast /Cast-in-situ Beams including centering complete
as per drawing Technical specification clauses
809,1500,1700
0
RCC M35 Cum 600 12500 7498400
PSC M45 Cum 2929 12500 36617309
7.08 HT Steel for PSC concrete complete as per drawing and
Technical Specification 1800,1009
Mt 105 125000 13182231
7.09 Providing, cutting, bending and fixing in position of TMT
bar reinforcement(Fe500 Gr.) in reinforced concrete
structure complete as per drawing and Technical
Specification Section 1600
Mt 885 63340 56057771
7.10 Providing bored cast-in-situ M35 grade RCC piles excluding
reinforcement complete as per drawings and technical
specifications and removal of excavated earth with all lifts
and lead up to 1000 m(pile dia 1200mm)
0
Project :4-Laning of NH-167 from Mahabubnagar-Jadcherla road, from Km 266.348 to Km 283.000 of NH-167 in the state
of Telangana
Subject : Bill of ROB
Bill 7-ROB
Item Description Unit Total Qty Rate Amount
No.
7.11 Bituminous Concrete Wearing Course of total 65 mm thick
comprising two layers of 25 mm thick Bituminous
Concrete laid over a coat of 15 mm thick Mastic Asphalt
as per Technical Specification Sections 509, 515, 521, &
2700.
Sqm 4871 517 2519734
7.12 Providing and fixing drainage spouts complete as per
drawing, Technical Specification clause 2705.
Nos 204 879 179316
7.13 Providing and fixing bearings complete as per drawing and
Technical Specification 2000,2200 and 2300.
0
a) Elastomeric bearings CC 2126250 1.2 2572763
b) Pot bearings nos 10 75000 750000
b) Kraft Paper / Tar Paper bearings sqm 8 89 669
7.14 Providing and fixing expansion joints complete as per
drawing and Technical Specification No. 2600 and
confirming to MoRT&H modified interim specifications
0
a) Filler joint / mastic Pad rm 25 141 3530
b) Strip seal type of expansion joint complete as per
drawing and Technical specification for+/-20 mm
rm 288 17100 4916250
c) Strip seal type of expansion joint complete as per
drawing and Technical specification for+/-50 mm
rm 0
7.15 Providing PCC M15 grade concrete for levelling course
under Approach Slabs
Cum 13 4756 62423
7.16 Providing Reinforced Cement Concrete M 30 grade in
approach slabs including reinforcement complete as per
drawings and Technical Specifications 1500,1600 and 1700
& 2704
0
RCC M30 Cum 26 9407 246934
7.17 Filter media (150 mm thick) underneath pitching in slopes
and flat surfaces complete as per drawing & Technical
Specification Clause 2504
Cum 0 1386 0
7.18 Stone pitching on sloped sufaces (300 mm thick) for earth
protection complete (for Quadrants) as per drawings and
Technical Specification 2504
Cum 0 1060 0
7.19 Providing weep holes in abutments, wing walls and return
walls complete as per drawing and Technical Specification
2706.
Nos 76 267 20292
7.20 Providing and constructing RCC crash barrier M 40 grade
including cost of centering as per approved Drawings and
Technical Specifications Clause 809 and as per IRC-6
Bill 7-ROB
Item Description Unit Total Qty Rate Amount
No.
7.23 Providing and laying Dry Boulder apron complete as per
Drawings and Technical Specifications Clause 2503
Cum 0 1060 0
7.24 Providing and laying PCC filling for bed protection as per
Drawings and Technical Specifications
Cum 0 4453 0
7.25 Confirmatory bore holes Rm 460 3000 1380000
7.26 Liner plate around piles (6mm thk) Mt 0
7.27 Providing and Construction Steel composite superstructure
as per drawings & Technical Specifications Mt
155 75000 11592000
7.28 Filter media behind MSE walls complete with all leads and lifts
as per drawing and Technical Specification Clause 2200 Cum
2400 1386 3326400
7.29 Construction of embankment with Reinforced Earth Cum 24638 550 13550625
7.30 Providing and constructing RCC crash barrier with friction
slab M 40 grade including cost of centering as per approved
Drawings and Technical Specifications Clause 809 and as per IRC-6 Rm
500 11000 5500000
7.31 Provision of MSE wall Sqm 2500 3000 7500000
Total cost = 198669884
= 19.87
Project :4-Laning of NH-167 from Mahabubnagar-Jadcherla road, from Km 266.348 to Km 283.000 of
NH-167 in the state of Telangana
Item
Description Unit ROB Total Qty
No.
7.01 Earthwork in excavation of foundation for
structures complete as per drawing and
Technical Specification Clause 304
including all Leads and Lifts
Item
Description Unit ROB Total Qty
No.
7.09 Providing, cutting, bending and fixing in
position of TMT bar reinforcement(Fe500
Gr.) in reinforced concrete structure
complete as per drawing and Technical Mt 885 885
Specification Section 1600
Item
Description Unit ROB Total Qty
No.
7.17 Filter media (150 mm thick) underneath
pitching in slopes and flat surfaces
complete as per drawing & Technical Cum 0 0
Specification Clause 2504
#REF!
PCC M20 Cum #REF! 3662 #REF!
RCCM35 Cum #REF! 5305 #REF!
6.06 Structural Cement concrete for Reinforced cement concrete
for Sub structure / Side walls of Box including centering
complete as per drawing Technical specification clauses
1500,1700,2200
#REF!
RCC M35 Cum #REF! 5809 #REF!
6.07 Structural Cement concrete for Reinforced cement concrete /
PSC Super structure / Top slab of Box / Precast /Cast-in-situ
Beams including centering complete as per drawing
Technical specification clauses 809,1500,1700
#REF!
RCC M35 Cum #REF! 6339 #REF!
6.08 Providing, cutting, bending and fixing in position of TMT bar
reinforcement(Fe500 Gr.) in reinforced concrete structure
complete as per drawing and Technical Specification Section
1600
Mt #REF! 50000 #REF!
6.09 Providing Reinforced Cement Concrete M 30 grade of 75mm
thick as wearing coat including reinforcement complete as
per drawings and Technical Specifications 1500,1600 and
1700 & 2704
Sqm #REF! 700 #REF!
6.10 Providing and fixing drainage spouts complete as per
drawing, Technical Specification clause 2705.
Nos #REF! 3415 #REF!
Project : Prebid Engineering for NH-49 Project from Madurai to Ramanathapuram
Subject : Bill of Minor bridges
Bill 6A-Minor Bridges
#REF!
a) Filler joint / mastic Pad rm #REF! 166 #REF!
b) Strip seal type of expansion joint complete as per drawing
and Technical specification for+/-20 mm
rm #REF! 39659 #REF!
6.13 Providing PCC M15 grade concrete for levelling course under
Approach Slabs
Cum #REF! 3082 #REF!
6.14 Providing Reinforced Cement Concrete M 30 grade in
approach slabs including reinforcement complete as per
drawings and Technical Specifications 1500,1600 and 1700 &
2704
#REF!
RCC M30 Cum #REF! 8688 #REF!
6.15 Filter media (150 mm thick) underneath pitching in slopes
and flat surfaces complete as per drawing & Technical
Specification Clause 2504
Cum #REF! 940 #REF!
6.16 Stone pitching on sloped sufaces (300 mm thick) for earth
protection complete (for Quadrants) as per drawings and
Technical Specification 2504
Cum #REF! 705 #REF!
6.17 Providing weep holes in abutments, wing walls and return
walls complete as per drawing and Technical Specification
2706.
Nos #REF! 417 #REF!
6.18 Providing and constructing RCC crash barrier M 40 grade
including cost of centering as per approved Drawings and
Technical Specifications Clause 809 and as per IRC-6