Professional Documents
Culture Documents
PRODUCTS
TABLE OF CONTENTS
Lubricant Products
Hydraulic/Transmission Fluid p. 4-7
Engine Oil p. 8-10
Gear & Transmission Oil p. 11-12
Grease p. 13
Filtration Products
Lube Filtration p. 14-15
Fuel Filtration p. 16
Hydraulic Filtration p. 17
Air Filtration p. 18
All-Makes Filters p. 19
Coolant / Antifreeze
XHD p. 20-21
fluid Analysis
Systemgard™ Fluid Analysis p. 22-23
2
A GUARANTEE OF QUALITY
New Holland delivers Engineered to oUR New Holland has
peak performance own standards what it takes
New Holland-approved maintenance Working at higher temperatures and When it comes to superior protection
products are engineered with a guarantee pulling heavier loads, today’s gas and and performance, New Holland-approved
of quality. For example, our latest diesel engines are working harder maintenance products are among the
generation of Ambra lubricants is specially than ever. It takes superior protection finest in the industry.
formulated for New Holland equipment, to stand up to the challenge. But don’t just take our word for it. In
while also meeting or exceeding the top That’s why New Holland develops its own the pages that follow, take a close
performance requirements of agricultural standards. Our lubricants are specially look at the features and benefits that
and industrial manufacturers across formulated with a complex blend of high- distinguish our products–features and
the industry. quality lube stocks and additives, and our benefits that are your guarantee of
Season after season, New Holland filtration products are engineered with quality in a name you can trust.
products deliver optimum protection, heavy-duty media to meet the needs of
peak performance and assurance our customers.
that what you’re putting into your
equipment is top quality.
3
HYDRAULIC / TRANSMISSION FLUIDS
MASTERTRAN™ Hydraulic / Transmission Oil (MAT-3505)
A unique, all-weather hydraulic/transmission fluid
MASTERTRAN is, quite simply, the finest hydraulic/transmission
fluid we make. MASTERTRAN is recommended in the operator
manuals of many of our newer high-horsepower equipment. It
enhances your brake and clutch capabilities while helping to reduce
brake chatter, clutch slippage and wear, and final drive wear.
MASTERTRAN fluid is designed for use in an ambient temperature
range of -20˚ to +120˚F (-30˚ to +50˚C).
MASTERTRAN:
» Provides better water tolerance and filtration efficiency
than typical tractor fluids, which is critical for preventing
additive fallout, filter plugging and sluggish performance
» Provides stable viscosity, which is essential to maintaining
optimum machine performance and long life
» Provides superior wear protection for hydraulic components,
drive train gears and other transmission parts
» Recommended for TG/TJ tractors, CR combines and other
models (where recommended by operator manual)
» Provides controlled frictional characteristics for smooth
operation of wet brakes and clutches
» Special non-zinc additives ensure a thermally and
hydrolytically stable product, keeping the system free
Part No. product Container size
of deposits and preventing the creation of corrosive
86639558 mastertran 1 gal./3.785 l.
by-products 86639559 mastertran 2.5 gal./9.46 l.
4
OXIDATION-CORROSION TEST
90 OXIDATION-CORROSION TEST
90
80
80
70
Lab tests
70
60
confirm what
60 field tests
Milligrams
50
Milligrams
50
40 have proven:
40
30
30 The ability of MASTERTRAN
20
20 to protect and perform
10
Additive/ MasterTran™ 100 when exposed to moisture
Water Fallout 0 Copper
Weight Loss
Copper
Deposit
Brass
Weight
Brass is unmatched.
Copper Copper BrassLoss Deposit
Brass
Weight Loss Deposit Weight Loss Deposit
Typical Tractor Fluid A Typical Tractor Fluid B MASTERTRAN™ Transmission Oil
Typical Tractor Fluid A Typical Tractor Fluid B MASTERTRAN™ Transmission Oil
500
ability to hold up to 1% of 500
Passed,
400
its volume in water and not
Passed,
400
300
experience any harmful effects,
Volume
300
Volume
MASTERTRAN™ SSL
Transmission Oil (MAT-3504)
MASTERTRAN SSL fluid is designed to work optimally all the way down
to -40˚F (-40˚C), yet it does not need to be drained in the summer,
because it’s a synthetic blend.
Part No. product Container size
5
HYDRAULIC / TRANSMISSION FLUIDS
MULTI G 134™ Hydraulic / Transmission Fluid (MAT-3525)
MULTI G 134 is a multipurpose fluid that has been and brake life. Superior anti-wear additives reduce pitting on
recommended in New Holland and Ford operator manuals critical gear surfaces. Oxidation inhibitors keep sludge from
for many years. It’s recommended for current low- and forming and keep the oil flowing to critical parts. MULTI G 134
medium-horsepower tractors and loader backhoes. It helps is compatible with commonly used seal and gasket materials.
ensure the best performance of your transmission, PTO clutches, This helps reduce oil leaks from seals that can harden, shrink
wet brakes and hydraulic system. Unique friction modifiers or swell — extending seal life.
suppress wet brake chatter, ensuring maximum stopping power
6
MULTI BIO Biodegradable
Hydraulic / Transmission Fluid
MULTI BIO is a biodegradable hydraulic/transmission fluid
currently approved for New Holland T6000, T7000, TL, TM, TN,
TS and Genesis 70 series tractors, along with CX combines. This
biosynthetic-based 10W-30 fluid exceeds several governmental
biodegradability and ecocompatibility requirements, with
biodegradability exceeding 90%, including OECD 201/202/
203/301B, VAMIL(NL), WGK 0, CEC L33A-93 and D5864-96.
It’s a multifunctional oil for transmission, wet brakes and
hydraulic systems.
» Provides
ultra-pure filtration
7
engine oils
MASTERGOLD™ HSP (MAT-3507)
MASTERGOLD HSP is a premium, high-performance engine oil
specifically designed and tested to provide maximum protection,
performance and long life in heavy-duty, high-temperature
operations. It’s designed for New Holland construction,
agricultural and other off-highway diesel-powered equipment.
MASTERGOLD HSP:
» Provides
superior protection against wear and corrosion
» Helps
keep engines exceptionally clean, minimizing deposits
and maintaining excellent soot control
» Allows
excellent cold-weather starting and operating performance
» Meets performance requirements of API Service Classification
CI-4, CH-4, CG-4, CF-4, CF, CE, CD II, CD or CC; Mack EO/K-2;
Mack EO-M Plus; Cummins 20076, 20077, 20078; ACEAE5; JASO
CD; MAN 270 and 271; Caterpillar Series 3 and Caterpillar TO-2;
as well as Allison C-3 and C-4 performance requirements
30
407357R5
407352r5
mastergold
mastergold
5 gal./18.93 l.
1 qt./.95 l.
broad ambient temperature range of -40˚ to +104˚F 10W-30 86641052 mastergold 1 gal./3.79 l.
8
Simple math:
Less oil consumption = Less expense
MASTERGOLD™ is formulated to keep your engine running cleaner throughout its life. Over time, that means lower oil
consumption and less oil expense. In fact, if you choose NOT to use MASTERGOLD, you might need to change your
oil as much as 50% more often.
Oil Consumption
3
6
2
4
1
2 MASTERGOLD
Engine Oil
0 0
Competitive Competitive MASTERGOLD Competitive MASTERGOLD Time
Brand CH-4 Brand CI-4 Engine Oil Brand Oil Engine Oil
Total Base Number (TBN) is an MASTERGOLD engine oil’s unique Cleaner-running engines use less oil
indication of the detergent and formula keeps piston deposits down over time. That can really add up to
dispersant additive levels in an oil. so your engine runs cleaner. cost savings.
These additives neutralize acids and
fight soot buildup and filter plugging.
9
engine oils
AUTO SUPREME™ Engine Oil
For automotive gasoline engines
AUTO SUPREME engine oil provides protection and performance for
all seasons, eliminating the need for seasonal oil grade changes.
It’s formulated with base oils and additives that provide superior
performance and protection for light application engines.
» Provides fast warm-up
10
Gear & Transmission Oils
HYPOIDE EP Gear Lube (MAT-3511)
For high-speed/low-torque and low-speed/high-torque applications
This premium, extreme-pressure gear lubricant provides superior
foam and oxidation stability, and reduces the risk of corrosion
and deposits that can cause costly damage to your equipment.
It’s formulated to stand up to high-temperature conditions.
HYPOIDE EP GEAR OIL:
» Prevents objectionable deposits and corrosion in gear cases,
bearing rollers, races and thrust washers
» Exceeds API GL-5 and MIL-L-2105D requirements, and meets
MIL-PRF2105E and ZFTE-ML05A
sae Part No. product Container size
11
Gear & Transmission Oils
Transaxle Fluid (MAT-3510)
A unique drive train lubricant
TRANSAXLE FLUID provides smooth, quiet operation in certain components of New Holland
wheel loaders (where recommended by operator manual). Its excellent, low-temperature
characteristics are superior to standard products.
» Minimizes deposits and corrosion of gear case and components
» Extends brake and gear life
SAE Part No. Product Container size
12
GREASE
GR-9 Multi-Purpose Grease (MAT-3550)
GR-9 is a general-purpose NLGI 2, lithium-soap, extreme- Part No. product Container size
pressure grease for use in agricultural, construction and industrial 9613310 GR-9 GREASE TUBE
equipment. It’s designed for use in antifriction and plain bearings 87298944 GR-9 GREASE 35 LBS./15.9 L.
(including nondisc brake wheel bearings), universal joints, spline 87298945 GR-9 GREASE 120 LBS./54.5 L.
grease containing molybdenum disulfide. It’s designed for 73340211 MOLY GREASE TUBE
heavy-duty use in construction, industrial and agricultural 87298946 MOLY GREASE 35 LBS./15.9 L.
equipment. It provides protection from extreme loads, shock 87298947 MOLY GREASE 120 LBS./54.5 L.
pressure grease for use in agricultural, construction, automotive 87299163 SYNTHETIC GREASE TUBE
13
filtration products
LUBE FILTRATION
To meet the performance demands of today’s tough off-road While the costs for repairing equipment breakdowns are
environments, your equipment is generating more usable horse- normally high, they are often miniscule compared to those
power than ever before. Tighter tolerances, higher temperatures associated with delayed harvests or missed project completion
and severe duty cycles are driving the requirement for high- deadlines. Don’t jeopardize productivity by using “will-fit”
quality filtration and increased durability without sacrificing filtration. CNH Original Parts lube filters are designed
filter life. Today’s low-emission engine designs make engine specifically for your equipment. They’re guaranteed to ensure
filtration extremely critical, especially particles in the 5- to 10- peak performance while providing maximum protection for
micron range, which are most damaging to modern engines. your investment.
Optimized filtration performance in capacity (life), efficiency (cleanliness) and restriction to flow:
1 SUPERIOR MEDIA
Our filters are designed to trap more of the small contaminants that are
most damaging to diesel engines. The media is uniformly resin-impregnated
and heat-cured to provide efficient filtration, while resisting the effects of
moisture. The media used in many of our newer filters combine microglass 2
and cellulose fibers for doubled efficiency over standard filters.
2 Stacked DisC
1
This custom-designed filtration media is 70% more efficient than cellulose 3
or paper media in filtering the 5- to 15-micron size contaminants.
3 HOT MELT 5
Our filters use hot melt — a high-quality adhesive — to uniformly bond the
filter element to the end caps. Plastisol adhesive keeps the filter media from
bunching and rupturing.
4 R UBBER SEALS
Many filter manufacturers use cardboard seals at the ends of the filters;
cardboard seals can deteriorate or leak. Our filters use a thin piece of rubber
that provides a tight, even seal at the base of the filter. It prevents unfiltered
oil from bypassing the filter media and re-entering your system.
5 METAL END CAPS AND CENTER TUBES
Solid metal components provide additional strength to the filter element.
Metal is superior to the cardboard that many manufacturers use. 4
OEM Specified.
Our filters meet all New Holland specifications. When you buy a CNH Original Parts
filter, you’re buying the confidence that New Holland engineers have placed in the
filter to protect your engine and save you repair costs.
14
ULTRA FILTERS WITH MICROLOC® MEDIA
Our Ultra filters with MicroLoc®
media represent the next generation of
filtration, designed specifically to deliver For Dirt, Dust And Debris,
optimum efficiency without loss of This Is The End Of The Line.
filter life. Extensive laboratory research
and thousands of hours of field tests Competitive MICROLOC ®
By using Ultra filters with MicroLoc® media, your engine systems will receive the best filtration performance available today.
Your filters will remove the small, high wear-causing particles from the minute they are installed until the minute they are
removed. Other filter manufacturers may claim to provide superior protection, but there is nothing that protects your equipment
like CNH Original Parts Ultra filters with MicroLoc.
15
filtration products
Fuel Filtration
Few things will impact your productivity faster than a poor CNH Original parts fuel filters:
quality fuel filter. Fine filtration, long life and efficient water
» Patented self-venting drain valve on fuel/water separators
removal are vital to keeping your equipment in the field and
on the job. » Proprietary media
Sure, there are other filters on the market today that will » Higher efficiency without loss of capacity
fit your engine, but there is only one line that’s designed
» Better injection protection
specifically for your New Holland equipment. These fuel filters
are guaranteed to provide maximum protection for your » Dramatically improved removal of both free and emulsified water
engine’s high-performance injectors and fuel pump systems. » Increased service life
The extremely high injection pressures and small injector
orifices in today’s 10W-emissions engines make fuel filters
more critical than ever. Demand the best protection for your
equipment investment. Demand CNH Original Parts filtration.
16
Hydraulic FiltratioN
High-performance synthetic media has become increasingly
common in our hydraulic and transmission filters. This media
provides maximum protection against wear, longer filter life and
less pressure drop compared to conventional media. As today’s
applications are even more demanding, the need for this high-
performance synthetic media is even more important. That’s
why our hydraulic filters are synthetic, delivering the optimum
balance of efficiency, capacity and pressure drop.
Advantages include:
» Lower pressure drop
» Customized efficiency for application
» Complete system design, head and filter
» Exact replacement each and every time
» Maximum dirt-holding capacity (longer service life)
» Greater temperature operating range
» Compatibility with new synthetic and
environmentally friendly oils
» Premier o-ring seal
» Continuous element quality control testing:
• Multipass • Pressure fatigue
• Pressure drop • Vibration
• Baffle torque • Burst element collapse
• Element cleanliness
*Results from a field test of CNH Original Parts filter (87413809) versus a competitive filter.
Dirt Loading Test ISO 16889. Media Rupture Test ISO 2941.
17
filtration products
Air Filtration
Your engine is equipped with an air cleaner housing with filter Our filters offer the following advantages:
elements, integral precleaner and intake ducting. All perform
» Highest efficiency product available
a certain function. For example, the intake ducts deliver air
to the precleaner, which takes out 75-94% of the heavy, » Designed and supplied as a complete system
coarse dust, before air reaches the primary element in the air » Exact replacement each and every time
cleaner housing. Dust that reaches the primary element has a
far greater chance of entering your engine if you’re not using » Continuous element media
genuine CNH Original Parts filters. » Quality control testing for:
• Efficiency
• Wet and dry strength
• Burst strength
» Pleatloc® media spacing for improved loading/field life
» Deeper end covers for more effective potting of media
» Urethane seals and molded-in-place gaskets
» Advanced Radialseal® for a leak-free seal
in rough conditions
» Improved contaminant encapsulation – dust and dirt
won’t dislodge during service
» Activated carbon-impregnated media absorbs odors before » Easy to install and remove without modification to
reaching the operator existing housing
» Synthetic media captures dust, pollens and other allergens » No mess – carbon is bonded to the filter media so
without air flow restriction there’s no need to add loose carbon refill
18
FLEETGUARD® FILTERS
Our all-makes filter program offers a comprehensive line of more than 5,000 products available:
Fleetguard air, coolant, fuel, hydraulic and lube filtration products
» All brands of agricultural and construction equipment
for all vehicle applications. The Fleetguard product line allows us
to offer you a “one-stop shop” for all your filter needs. » Automotive applications
» Industrial engines
Fleetguard® features and benefits
» Lawn equipment
» Advanced and innovative filtration products
» Motorcycles
» Meets Original Equipment Manufacturer’s specifications
» ATVs
» 24/7 customer assistance and service engineering support
» Boats
19
coolant antifreeze
XHD heavy-duty coolant / antifreEZe
Major diesel engine manufacturers estimate that more than 50% of engine failures are cooling system related. Worn rings, scuffed
pistons, cracked heads and corroded bearings may appear to have nothing in common with the cooling system, when in fact, these
problems are often the symptoms of improper cooling system maintenance. Using XHD, a heavy-duty coolant formulated for use with
off-road equipment, will help you avoid premature engine failure.
Premix
also
available
» Long-term corrosion protection for all cooling system metals, B30206 XHD PREMIX 55 GAL./208.19 L.
including aluminum, brass, cast iron, steel, solder and copper B30207 XHD PREMIX 330 GAL./1249.2 L.
20
Cheaper products have costlier consequences
21
FLUID ANALYSIS
SYSTEMGARD™
WHY SYSTEMGARD?
Systemgard laboratories are ISO 17025 A2LA
accredited – the highest level of quality attainable
by a testing laboratory backed by the most stringent
accrediting body in the industry. This means, with
Systemgard, you can be confident that the results
you receive are accurate, repeatable and traceable
to a superior standard.
» Each
test report provides severity codes and
troubleshooting recommendations
» Severe
findings are communicated immediately via
phone, fax or e-mail
» R esults are available through Horizon online almost
immediately after sample processing is complete
22
TAKING SAMPLES
Using Systemgard Fluid Analysis for regular sampling and Trend Samples should be taken while the systems are operating under
Analysis (monitoring test data over an extended period of time) normal conditions or immediately after shutdown while they are still
will provide the information you need to continually maximize asset at operating temperature. Samples should also be taken at regularly
reliability and, ultimately, increase company profits. scheduled intervals and from the same sampling point each time.
23
PM-15171
© 2010 CNH America LLC. CNH and New Holland are registered trademarks of CNH America LLC.
Any trademarks referred to herein, in association with goods and/or services of companies other than CNH America LLC, are the property of
those respective companies. All rights reserved. Printed in USA.
www.newholland.com