Professional Documents
Culture Documents
Assignment No 1
Grade: AA / AB / BB / BC / CC / CD /DD
Q2. A vertical cylinder of 64 mm diameter is resting on its base on HP. It is penetrated by horizontal
square prism of 34 mm side. The axis of square prism is parallel to HP & VP and bisects the axis of cylinder
while its faces are equally inclined with HP. Draw the projection showing curves of penetration. ( height of
vertical cylinder 84 mm, length of square prism 80 mm)
Assignment No 2
Grade: AA / AB / BB / BC / CC / CD /DD
Q2. Model an assembly of Knuckle joint using Solidworks Software. Prepare the detailed assembly
drawing for the same.
Assignment No 3
Grade: AA / AB / BB / BC / CC / CD /DD
Q1. Figure shows an assembly of Gland and stuffing box expansion joint
Prepare part drawing of all parts using Solidworks software
Assignment No 4
Grade: AA / AB / BB / BC / CC / CD /DD
Assignment No 5
Grade: AA / AB / BB / BC / CC / CD /DD
Details of the Drill Jig are given. Prepare an assembly of given parts using Solid works software.
Assignment No 6
Grade: AA / AB / BB / BC / CC / CD /DD
Assignment No 7
Grade: AA / AB / BB / BC / CC / CD /DD