Professional Documents
Culture Documents
3- Speaker. Backlight
Connector
Power Cord
SERVICE MANUAL - COMMON LED TV
PART DETAIL-02
Model No.- 3201I BACK COVER
SAMSUNG-V315VT11
LSC320AN9/10
DC24V.
DC15V. DC12V.
DC5V.
DC12V.
DC240V.
DC3.3V.
AC220V.
DC1.2V. DC1.8V.
SERVICE MANUAL - COMMON LED TV
ISSUE & CORRECTIVE ACTION IN FIELD
Sr. No. Issue Check Point Image Reference
Action Taken
Input Voltage is Coming then need to replace Main
Board If Voltage is not coming then change the Power
cord
SERVICE MANUAL - COMMON LED TV
ISSUE & CORRECTIVE ACTION 2nd PHASE
Sr. No. Issue Check Point Image Reference
8 No Sound, 1. Check the Input source Properly Like AV, HDMI &
Video OK USB
2. Check the Speaker connector wire, It should be
Proper Lock with Main board Jack
3. Speaker Impedance to be check through
Multimeter, Impedance should be come 8 Ohm, If
Impedance is not coming 8 ohm then change the
Speaker
Action Taken
8.0
4. After checking all the above Point if Audio is not
working then change the Main Board
SERVICE MANUAL - COMMON LED TV
ISSUE & CORRECTIVE ACTION 2nd PHASE
Sr. No. Issue Check Point Image Reference
10 No Video, 1. Check the Input source Properly Like AV, HDMI & USB
Sound OK 2. Check the LVDS Cable it should be Lock Properly with Panel
PCB
3. Check the Backlight, It is glowing or not
If Back Light not Glowing Properly then check the below points
Check the Backlight connector in Main Board, It should be
Lock properly with Main Board Hader
Check the Backlight Voltage at Main Board Hader
If Back Light Voltage is not coming at Main Board Hader then
change the Main Board
If the Back light Voltage is coming then Need to change the
Panel
SERVICE MANUAL - COMMON LED TV
ISSUE & CORRECTIVE ACTION 2nd PHASE
Sr. No. Issue Check Point Image Reference
2. Abnormal Picture
3. V-Bar
Action Taken
Change the Panel
SERVICE MANUAL - COMMON LED TV
ISSUE & CORRECTIVE ACTION
Sr. No. Issue Check Point Image Reference
Action Taken
Change the Panel
SERVICE MANUAL - COMMON LED TV
FEATURE DETAIL
Sr. No. Check Point Image Reference
15 M.Cast 2
Please follow below steps for screen mirroring operation 1
1.Press m.cast key in remote control then pic no.1 will appear at
your screen.
2.Switch ON wireless display though remote control navigation
key
3.Open wireless display application in your handset then Smart TV
name should appear in your mobile phone please select Smart TV
in your handset then Pic no.3 will appear 3 4
4.After connect your Smart TV with mobile phone then pic no.5
will be appear.
5
SERVICE MANUAL - COMMON LED TV
FEATURE DETAIL
Sr. No. Check Point Image Reference
16 Internet Connectivity
1.LANE Connectivity
1 2
Insert Lan Cable in Put Jack
Select the setting option through Remote control then Pic No-
1 will appear
Select the Wired connection through Navigation key & switch
On Ethernet
Switch On Automatic Abtain IP address then full fill
Automatically all column.
Save the same After above setting. Then Ethernet will start
2. WI.FI Connectivity 3 4
Select the setting option through Remote control then Pic No-
1 will appear
Select the Wireless connection through Navigation key &
switch On Wi-Fi
Wi-Fi name will be appear in your TV screen then select the
same, If Wi-Fi is Password protected then need to write the
Password in your TV
Save the same After doing above process. Then Ethernet will
start