This work-processing sheet summarizes the steps needed to machine an individual part from a drawing. The part number is A0001 and will be machined from a raw stock piece with a diameter of 210mm made of S235JR steel. The 10 steps include preparing by reading drawings, checking machine availability, and measuring the raw stock. The machining steps use a lathe to cut the surface, drill, and then cut the workpiece down to a diameter of 22mm and length of 93.5mm using various turning tools.
This work-processing sheet summarizes the steps needed to machine an individual part from a drawing. The part number is A0001 and will be machined from a raw stock piece with a diameter of 210mm made of S235JR steel. The 10 steps include preparing by reading drawings, checking machine availability, and measuring the raw stock. The machining steps use a lathe to cut the surface, drill, and then cut the workpiece down to a diameter of 22mm and length of 93.5mm using various turning tools.
This work-processing sheet summarizes the steps needed to machine an individual part from a drawing. The part number is A0001 and will be machined from a raw stock piece with a diameter of 210mm made of S235JR steel. The 10 steps include preparing by reading drawings, checking machine availability, and measuring the raw stock. The machining steps use a lathe to cut the surface, drill, and then cut the workpiece down to a diameter of 22mm and length of 93.5mm using various turning tools.
Rd. ISO 10060-26 x 215 – S235JR Process Cost group Description Aids/ Set- Time Step NC-Prg. up per no. Measuring time unit Instruments Min Tools 10 Preparation Reading Drawing, Clarifying Problem 20 Checking available machine, tool and measuring instruments 30 Checking Measures of Raw Vernier part 210 mm caliper 0.05 mm 40 Turning Place workpiece on chuck Chuck key mechine no 50 Cutting the surface of the Right flat workpiece tool 60 Drill workpiece using drill Drill center center 70 Install workpiece using center of tail center of tail stock stock 80 Cutting workpiece until Right flat diameter 22.5 mm , long to tool 93.5 mm 90 Cutting until diameter Finishing diameter 22mm, long to tool 93.5 mm with finishing tool 100