Professional Documents
Culture Documents
FloorGratings PDF
FloorGratings PDF
Úlehlova 108/1
700 30 Ostrava – Hrabůvka
EN ISO
Czech Republic
9001
TEL., FAX: +420 595 782 426 –7
E-MAIL: noving@noving.cz
http://www.noving.cz
FLOOR GRATINGS
DIRECTION 01
Floor gratings consist of bearing rods and connecting rods. Grating types:
• welded gratings (connecting rods are welded to bearing rods)
• pressed gratings (connecting rods are connected to bearing rods by pressing)
• stainless gratings (kind of pressed gratings produced of stainless steel)
All the above-mentioned kinds are custom made, the dimensions and sizes are
determined by the specific need of each customer, and they are also fulfilling the
requirements of DIN 24 537 standard.
Usage
Contents
Description
Sample description:
SP 30 x 30 A A / 30 x 3 / 900 x 1000
w idth
leng th (sp an)
bearing rod thickness t
b earing rod height h
mesh ty pe
gratin g type
Mesh types
30 x 30 AA 34,3 x 38, 1
30 x 45 AC 34,3 x 50,8
30 x 70 AE 34,3 x 76,2
- 25 x 2 30 x 2 40 x 2 - - - -
20 x 3 25 x 3 30 x 3 40 x 3 - - - -
- - - - - - - -
- - 30 x 5 40 x 5 50 x 5 60 x 5 70 x 5 80 x 5
To determine the load of welded gratings with different mesh size it is possible to use the
coefficient w from the following table.
Weight table
- - - 30 x 5 42,5 45,5
40 x 3 34,5 37,5 - - -
30 x 30
- - - 25 x 2 15,0 16,5
- - - 30 x 5 41,0 43,5
40 x 3 33,5 36,5
- - -
Description
Sample description:
P 33 x 33 / 30 x 3 / 900 x 1 000
w idth
length (span)
bearing rod thick ness t
bearin g rod height h
mesh type
grating type
Mesh types
Mesh type A x B
22 x 11 22 x 22 22 x 33 22 x 44 - -
33 x 11 33 x 22 33 x 33 33 x 44 - 33 x 66
44 x 11 44 x 22 44 x 33 44 x 44 44 x 55 -
- - - - 55 x 55 -
- - - - - 66 x 66
20 x 2 25 x 2 30 x 2 - 40 x 2 - -
20 x 3 25 x 3 30 x 3 - 40 x 3 50 x 3
- - - - 40 x 4 - -
- - 30 x 5 - 40 x 5 50 x 5 60 x 5
Explanations:
# bearing rod [mm]
* q= uniform load in kN/m2, f= deflection in mm from load q
P= point load in kN in the center of grating 200x200 mm, f1= deflection in mm from P
33x11 44x11
22x11
33x22 44x22
22x22
Mesh type 33x33 44x33 55x55 66x66
22x33
33x44 44x44
22x44
33x66 44x55
Coefficient w 1,48 1,00 0,74 0,58 0,52
Weight table
Weight
Bearing rod [mm]
[kg/m2]
Mesh type 20x2 25x2 30x2 40x2 50x2 20x3 25x3 30x3 40x3 50x3
11 x 11 42,9 50,0 57,2 71,5 85,8 57,2 67,9 78,6 100,0 121,5
22 x 11 28,8 32,3 36,0 43,2 50,4 36,0 41,4 46,8 57,7 68,5
22 x 22 21,7 25,3 28,9 36,1 43,4 28,9 34,3 39,7 50,6 61,4
22 x 33 19,4 22,9 26,5 33,8 41,0 26,5 32,0 37,4 48,2 59,1
22 x 44 18,2 21,7 25,4 32,6 39,8 25,4 30,8 36,2 47,1 57,9
33 x 11 24,0 26,5 28,9 33,8 38,6 28,9 32,6 36,2 43,5 50,8
33 x 22 17,0 19,4 21,9 26,7 31,6 21,9 25,5 29,1 36,5 43,8
33 x 33 14,6 17,1 19,5 24,4 29,2 19,5 23,2 26,8 34,1 41,4
33 x 44 13,5 16,9 18,3 23,2 28,1 18,3 22,0 25,6 32,9 40,2
33 x 77 11,9 14,4 16,8 21,7 26,6 16,8 20,5 24,1 31,4 38,8
44 x 11 21,7 23,5 25,4 29,1 32,8 25,4 28,2 30,9 36,5 42,0
44 x 22 14,6 16,5 18,3 22,0 25,7 18,3 21,1 23,9 29,4 34,9
44 x 33 12,3 14,1 16,0 19,7 23,3 16,0 18,7 21,5 27,0 32,6
44 x 44 11,1 12,9 14,8 18,5 22,2 14,8 17,6 20,3 25,9 31,4
44 x 55 10,4 12,2 14,1 17,8 21,5 14,1 16,9 19,6 25,1 30,7
55 x 55 8,9 10,5 11,9 14,9 17,9 11,9 14,2 16,4 20,9 25,4
66 x 66 7,5 8,8 10,1 12,6 15,1 10,1 11,9 13,8 17,6 21,4
99 x 99 5,2 6,0 6,9 8,6 10,4 6,9 8,2 9,5 12,1 14,7
Description
Sample description:
P N 33 x 33 / 30 x 3 / 900 x 1 000
w idth
length (span)
bearing rod thick ness t
bearin g rod height h
mesh type
grating type
Mesh types
Mesh type A x B
- - 25 x 25 - -
33 x 11 33 x 16 - 33 x 33 33 x 66
Bearing rods 30 x 2 are produced for all mesh types, rods 30 x 3, 40 x 2, and 40 x 3 are
produced for selected mesh types only.
Load table
To determine the approximate values of load and deflection for stainless gratings, it is
possible to use relevant tables for pressed gratings with the following reduction coefficients:
Weight table
To determine the weight of stainless gratings, relevant tables for pressed gratings may be
employed.
Special gratings to be used for slanted areas and bridges or in places with higher danger
of slipping (snow, ice, wetness, oil...). These gratings are produced in order to maximally
increase the friction to ensure safety under the above-mentioned conditions. Employed
kinds of gratings are welded, pressed or stainless gratings.
Special gratings are usually supplied with following bearing rods: 30x3, 40x3. Upon
request it is possible to supply also rods 20x3, 25x3.
Loading capacity of special gratings is 9-24% lower than equivalent normal grating.
Deflections are increased by approximately 4-17%.
Recommended minimal
Presumed load
Load Load kind dimensions if bearing rods
[kN/m2]
[mm]
single
Light 3,40 30 x 2
person
Example Nr. 1)
• Given:
o Sizes: distance of supports = 800 mm, width = 1000 mm.
o Load: 1200 kg/m2 = 12 kN/m2.
o Requirement: pressed grating without special requirements.
• Solution:
o Using load table for pressed gratings we can find the closest higher
grating: 30 x 2 with loading capability 16,3 kN/m2.
o Order: Pressed grating P 33 x 33 / 30 x 2 / 860 x 1000
• Note: Length is increased as grating should be fixed to supports for distance
equal to the height of bearing rods, at least 30 mm, see construction details.
Example Nr. 2)
• Given:
o Load: not specified, grating is used for pedestrians.
o Sizes: distance of supports = 1500 mm, width = 1000 mm.
o Requirement: welded grating without special requirements.
• Solution:
o Using the table "Simplified Type Selection" we can determine load
approximately 4,9 kN/m2.
o Using load table for welded gratings we can find the closest higher
grating: 30 x 3 with loading capacity 6,72 kN/m2.
o Order: Welded grating SP 30 x 30 / 30 x 3 / 1560 x 1000
• Note: Length is increased as grating should be fixed to supports for distance
equal to the height of bearing rods, at least 30 mm, see construction details.
Floor gratings are custom made. Thus their size, layout, fixing points etc. are made
according to customers' wishes.
Attachment of gratings
support
support
If possible, gratings should be in the direction of bearing rods supported in the length of
at least equal to the height of bearing rods, minimally 30 mm.
Surface protection
The following geometrical tolerances are valid for all kinds of welded, pressed as well as
stainless gratings under the following assumptions:
• bearing rod up to 60 x 5 mm
• mesh size from 11 mm to 68 mm
2
• grating area does not exceed 2 m and no grating dimension is greater than 2000 mm
High framing
pmax = 1 mm
Low framing
mmax = 1 mm
Deflection
• length to 600 mm: qmax = 3 mm
• length over 600 mm: qmax = 1 / 200 of length
Description
Mesh types
Mesh sizes and dimensions of bearing rods of stair tread are identical with mesh sizes
and bearing rods dimensions of welded, pressed or stainless gratings.
25 x 2 30 x 2 40 x 2
25 x 3 30 x 3 40 x 3
Loading capacity
Single force acting on area 100 x 100 mm in the middle of the tread span is 1500 N.
The choice of grating type for stair threads is subject to the same rules as
grating type selection.
Construction details
Any modifications like holes or cuts within stepping edge rod are not permitted.
Side boards of stair treads are supplied with circular and longitudinal holes for M 12
screws. Each tread should be attached by 4 screws.
Tolerances
• L = max. +0, -3 mm
• W = max. +5, -5 mm
• for other see general grating tolerances
Weight table
Spiral flights are supplied as modular system. Stair treads and railing elements are designed in such a
way to enable different geometry of flights. Stair treads are attached to the central pipe by screws.
2 x 14 / M12
Gratings 30x2(3) or
Expanded Sheet
Or
Pipe
Please, copy and fill this form in. You can submit it by mail, fax or e-mail. Similar form may
be also found on our homepage www.noving.cz for easier sending by e-mail.
e-mail: noving@noving.cz
account number:
Nr. mesh type rod type span width pieces style/surface protection
_________________________________________________________
_________________________________________________________