Professional Documents
Culture Documents
PROFITABILITY ENHANCED
JAW CRUSHER
n FEA designed, the sculpted main frame reduces weight while maintaining
strength and reliability.
n Designed with foot mounts located at mid-level, the low profile jaw fits
snuggly into a chassis and is ideally suited for track or wheeled portable plant
mounting.
CRUSHER CAPACITIES
CRUSHER CLOSE SIDE SETTING
Crusher
Brand Units 2” 2 ½” 3” 3 ½” 4” 5” 6” 7”
Model
(51mm) (63mm) (76mm) (90mm) (102mm) (127mm) (152mm) (178mm)
Telsmith H2550 mtph 145 - 236 163 - 268 181 - 290 200 - 327 227 - 367 268 - 440
Telsmith H3244 mtph 159 - 240 172 - 259 186 - 304 218 - 327 259 - 386 295 - 481
Telsmith 3648D mtph 260 - 392 295 - 443 325 - 492 367 - 558
KPI-JCI V2650 mtph 144 - 234 162 - 265 180 - 288 198 - 324 225 - 365 265 - 437
KPI-JCI V3055 mtph 227 - 298 257 - 338 285 - 376 343 - 453 402 - 530 452 - 594
Note: Capacities are approximate total throughput based on an average material having a bulk density of 1600 kg/m3.
Throughput capacity will vary depending on the type of material, feed gradation, moisture content, feed method and other site specific operating conditions.
H2550 / H3244 PP TJC
TELSMITH TIL H2550 / H3244 PP TJC is a wheel mounted electric powered Primary Crushing & Screening unit.
It can achieve production of 300 mtph for both H2550 and H3244 of aggregate under mentioned feed material specification and gradation
(Bulk density 1.6 T /m3).
Includes Grizzly Feeder, Dirt Screen, Jaw crusher, Under Crusher Conveyor, Electricals, platforms – all mounted on a trailer.
CRUSHING & SCREENING SOLUTIONS
GRIZZLY FEEDER
GRIZZLY FEEDER
1500
(1360)
1) Throw, speed and material flowability combine to give estimated
travel speeds of: 40FPM @ 0º; 65 FPM @ 5º; 120 FPM @ 10º.
1000
2) 12” bed depth at the feeder pan discharge or start of grizzly bars. (907)
0
(0)
36" 42" 48" 54" 60" 66" 72"
FEEDER WIDTH
HEAVY DUTY VIBRATOR MECHANISM
Telsmith feeders are equipped with a heavy duty, model HF vibrator extended service intervals. Bolt-on positive counterweights allow simple
mechanism. With decades of operating history, the HF mechanism is field adjustments to increase (or decrease) the length of the stroke.
among the most reliable available in the mining industry today. Model Precision cut gears maintain the proper shaft timing, generating an
HF vibrator housings are fabricated from heavy plate in an open tube efficient straight line stroke to convey material down the feeder pan.
style for rigidity and strength. Side plates are precision machined to This type of mechanism allows for the gear timing to be field altered,
ensure tight sealing and proper bearing alignment. Wide series, double changing the angle of the stroke. The ability to modify the stroke
row spherical roller bearings deliver greater load carrying capacity angle and length allows versatility to optimize performance in a variety
than standard series bearings, providing long service life even in 24 of applications. Rugged, reliable and versatile, Telsmith HF vibrator
hour operations. Using the open tube design, the HF units carry large mechanisms deliver outstanding performance in the toughest work
oil volumes to insure proper lubrication of bearings and gears with environments.
OIL LUBRICATION
Open tube - flow through oil lubrication
provides consistent lubrication. Large
oil volumes provide cool operating
temperatures and longer service.
POSITIVE WEIGHTS
Bolt-on positive weights are used to adjust
the length of the stroke. Adding weight
increases the stroke which can increase
“G” forces, rate of travel and the ability to
keep grizzly bars clean.
TIMING GEARS
Precision cut gears maintain the desired
timing of the shafts. Changing the timing
alters the angle of the stroke, providing
another tool for optimizing performance.
CRUSHING & SCREENING SOLUTIONS
SPECIAL FEATURES
Spring tensioning
Hydraulic adjustment STATIC DUMP HOPPER CAPACITY 20 - 25m3
Hydraulic overload relief
TRAILER MOUNTED DUMP HOPPER CAPACITY 15m3
Hydraulic chamber clearing
PORTABLE JAW PLANT
WEIGHT WEIGHT
Total Weight 41426 kg Total Weight 44375 kg
Weight on Axles 25892 kg Weight on Axles 27704 kg
Weight on King Pin 15534 kg Weight on King Pin 16671 kg
CONE CRUSHER
For more than a century, aggregate and mining professionals who require the highest productivity best reliability and lowest cost per ton have turned
to cone crushers from Astec Aggregate & Mining Group (AAMG) for consistent performance. The experience shows in today’s comprehensive line of
AAMG cone crushers.
Engineered into each model with a common commitment to peak day to day performance and long term durability….. a commitment backed by the
100 year reputation for design excellence, manufacturing, craftsmanship and customer satisfaction of AAMG all over the globe.
n Engineering in 3-D
n Training
Note: The minimum recommended CSS is determined by the crushing chamber selection and operating conditions.
Capacities are approximate total throughout based on an average material having a bulk density of 1600 kg/m3.
Throughput capacity will vary depending on the type of material, feed gradation, moisture content, chamber selection, feed method and other site specific
operating conditions.
38 SBS / 44 SBS PP TCC
Telsmith TIL 38 SBS/44 SBS PP TCC is a wheel mounted electric powered secondary crushing unit. The nominal capacity of this machine is up to 200
mtph for 38 SBS and 300 mtph for 44 SBS aggregate under mentioned feed material specification and gradation (Bulk density 1.6 T/m3).
Includes Cone Crusher, 4 Deck Vibrating Screen, Chutes, Electricals, platforms, etc.all mounted on a trailer.
CRUSHING & SCREENING SOLUTIONS
PATENTED LINER RETENTION SYSTEM PATENTED THREAD LOCKING RING PATENTED FIELD REPLACEABLE BRASS LINED V-SEAT TRAMP IRON RELIEF SYSTEM
Our patented liner retention system makes 360-degree ring replaces individual BRASS THREADS Replaceable brass seat liners provide Eliminate maintenance costs associated with
liner changes simple, safer and quicker. cylinders and acts as a single piston Older machines use steel-on-steel rotation an extra layer of protection against accmulators. Pressure relief valves act as
providing low maintenance, leak-free threads that frequently gall or weld overload events. a latch, generating minimal back pressure
operation preventing bowl creep. together. KPI-JCI’s patented a brass-thread build-up during an overload event. Picture
insert resists the galling and welding. above shown in the “clearing” position.
HYDRAULIC PANEL
Hydraulic pump, filter, etc. are away from
the crusher in an easy to service panel.
ANTI·SPIN CONE BRAKE ROLLER BEARINGS REVOLVING WEDGE ROBUST BASE FRAME LUBE PANEL
Anti-spin feature reduces manganese wear Precision design generates higher Fully protected counterweights eliminate Kodiak Plus crushers are the heaviest in Houses lube pump, filter, etc. are away
costand minimizes projectiles for improved efficiencies, reducing re-circulating loads the need for replacements and maintains the class, thus applying more pounds per fram the crusher in an easy to service
safety. Optional hydraulic anti-spin also and operating temperatures. Highly true balance through the life ofthe horsepower into its core function-crushing. panel.
available tolerant of climate and temperature machine.
fluctuations.
CRUSHING & SCREENING SOLUTIONS
SPECIAL FEATURES
Dynamic Adjustment
Hydraulic Lock
Hydraulic relief & clearing
Metal Detector
Anti-Spin (optional)
6x16 QD VKTL
PORTABLE CONE PLANT
WEIGHT WEIGHT
Total Weight 35986 kg Total Weight 38526 kg
Weight on Axles 19553 kg Weight on Axles 21125 kg
Weight on King Pin 16433 kg Weight on King Pin 17401 kg
Maximum
Tube Feed Tube Maximum
feed size Accelerator Capacity Motor Power
Model Diameter Diameter feed size Weight (kg)
shoe table Speed (rpm) (mtph) (HP)
(mm) (mm) rotor (mm)
(mm)
VSI 2500 1838 289 51 76 700-1400 135-267 300 8,518
Specifications - 2500
2500 VSI PP TVC
KPI –JCI TIL 2500 VSI PP TVC is a wheel mounted electric powered Tertiary Crushing Plant with VSI and Screen
mounted on a trailer.The nominal capacity of this machine is up to 200 mtph for aggregate under mentioned feed
material specification and gradation (Bulk density 1.6 T/m3).
WEIGHT
Total Weight 28765 kg
Weight on Axles 14680 kg
Weight on King Pin 14085 kg
TL VIBRATOR MECHANISM
Incorporates wide series bearings,
Never-WearTM sealing system,
large oil volumes and oil level sight
gauges for reduced operating costs. EXTRA DECK SPACING
Extra clearance improves access for
SINGLE & DUAL SHAFT MODELS media changes reducing maintenance
Dual shaft arrangements are available with 130mm downtime.
and 160mm bearings providing versatility in load
bearing capacity and bearing life.
PLANT CONVEYORS
CHENNAI
TIL Limited
Jhaver Plaza, 7th Floor 1-A Nungambakkam High Road
Chennai 600 034, Tamil Nadu
Phone: +91 44 6670 3000 / 3010
Fax: +91 44 2827 9681
Email: chennai.til@tilindia.com
DELHI NCR
Plot 11, Site No.IV
Sahibabad Industrial Area
Ghaziabad 201 010 U.P.
Phone: +91 120 277 8735 / 8736 / 7468
Fax: +91 120 277 7467
Email: MHGMarketing.Sahibabad@tilindia.com | mhscs.Sahibabad@tilindia.com
DELHI
TIL Limited
302 Ansal Bhawan
16, Kasturba Gandhi Marg, New Delhi 110 001
Phone: +91 11 2331 1607 / 8046 / 9248 | 2335 0250 / 0255
Fax: +91 11 2331 3263
Email: til.delhi@tilindia.com
KAMARHATTY
TIL Limited
517, Barrackpore Trunk Road
Kolkata 700 058
Phone: +91 33 2553 1352 / 1882 | 6633 4000
Fax: +91 33 2553 2546 / 5971
Email: MktDept.KMT@tilindia.com | til.kmt@tilindia.com
KHARAGPUR
TIL Limited
Vill. & P.O. Changual, Kharagpur
Dist: Paschim Medinipur 721 301, West Bengal
Phone: +91 32 2266 1101
MUMBAI
TIL Limited
502 - A, 5th Floor, Western Edge Tower No.1
Western Express Highway, Datta Pada Road
Borivali (East), Mumbai 400 066, Maharashtra
Tel: +91 22 6147 9159 / 9135 / 9143 / 9133 / 9137 Toll Free No: 1800
266 1535
Mobile: +91 90043 88002 | 99301 11962 | 98926 79925 | 88509 71609
Fax: +91 22 6147 9111
Email: Mumbai.TIL@tilindia.com | Mumbai.Custsupp@tilindia.com
www.tilindia.in