Professional Documents
Culture Documents
T-Bea
For negative moment this beam will not a
so we will check only for positive momen
Mu f
100.86 k-f 0.9
Reinforcement Design i
M
100.86 k-f
1210.4 k-in a
1
1.95331034
1.99558618
1.99750338
As
As(req)
/2
12.5 f 48.41
1 3.87
10.8 f 41.64
Shear Ca
1/2fVc
fVc
2fVc
4fVc
Take, Spacing
Slab Thickness 6 in
Hatched Area 286.00 f^2
Change here
Width, bw Flange Depth of Web hw DL of wep Total DL Beam length UDL, DL
12 in 6 in 19 in 5937.5 lb 43.12 kip 25 f 1.72 kip/f
5.94 kip
T-Beam Check
ment this beam will not act as a T-Beam.
only for positive moment. Mu 100.86 k-f
4 - # 5 bar
1.9923765432
2.1299535908
2.1436916165
2.145073192
2.15 in^2
L L/2 L/4
25 f 13 f 6f
Change here
Spacing Calculation Use #3 Bar
Smax Smax Smax 0.11 in^2
22 in 11 in 24
Take, Smax= 11 in
Shear Calculation Here, f
10351.96 lb 10.35 kip 0.75
20703.91 lb 20.70 kip
41407.83 lb 41.41 kip
82815.65 lb 82.82 kip
5.3 in
Area p2
150.0 f^2 10 f
Change here
Live Load=75.0 Ksf
LL UDL,LL Wu
21.45 kip 0.86 kip/f 3.87 kip/f
Change Here
# 5 bar
Take, Spacing 5 in