Professional Documents
Culture Documents
Juniper Link Aggregation PDF
Juniper Link Aggregation PDF
CLUSTERS
Link Aggregation
Link Aggregation
This configuration
AE0
is wrong and will
not work.
Link Aggregation Group (LAG)
AE1/LACP
AE0/LACP
Possible Configuration #2
RG 1
AE0/LACP AE1/LACP
Possible Configuration #3
RG 1
CP AE1/L
AE1/LA ACP
EX Virtual
Chassis
LAG Configuration
Add physical interfaces to our Reth to create a LAG and enable
LACP.
0/0/9 5/0/9
0/0/10 5/0/10
AE1/LACP
AE0/LACP 0/0/4
0/0/2 0/0/5
0/0/3
Switch Configuration
# set chassis aggregated-devices ethernet device-count 2
# set interfaces fe-0/0/2 fastether-options 802.3ad ae0
# set interfaces fe-0/0/3 fastether-options 802.3ad ae0
#set interfaces fe-0/0/4 fastether-options 802.3ad ae1
#set interfaces fe-0/0/5 fastether-options 802.3ad ae1
#set interfaces ae0 aggregated-ether-options lacp active
#set interfaces ae1 aggregated-ether-options lacp active
#set interfaces ae0 aggregate-ether-options lacp periodic fast
#set interfaces ae1 aggregate-ether-options lacp periodic fast
#set interfaces ae0 unit 0 family ether-switching vlan members vlan vlan-trust
#set interfaces ae1 unit 0 family ether-switching vlan members vlan vlan-trust
Verify LAG/LACP
⬜ We can verify our LAG is working by using the
commands below.