Embedded Masters degree in the field of Electronics, Electrical
and computer science engineering Engineer Design and implement software for embedded devices and systems from requirements to production and commercial development Programming knowledge on C, Embedded C, C++ Knowledge on various microcontrollers and Processors and communication protocols such as I2C, SPI, UART, CAN. Knowledge on RTOS Integrate and validate new product designs Support software QA and optimize I/O performance Provide post production support Interface with hardware design and development
DSP Engineer Masters degree in the field of Electronics, Electrical
engineering. Solid theoretical background in digital signal processing principals Hands on experience in signal processing techniques such as digital filter design (IIR, FIIR), adaptive filtering, noise and echo cancellation Familiar with microphone beam forming techniques Experience in implementing audio and speech algorithm on both fixed and floating-point DSP MATLAB, C and Assembly language experience required Familiar with Signal Interfaces (I2S, I2C) and Bluetooth protocols Good understanding of basic acoustic and audio principals Knowledge of machine learning algorithms a plus Converting concepts into technical requirements and the associated tradeoffs. Demonstrated ability of working effectively in a multidisciplinary team environment (electronics, acoustics, mechanical)
RADDEF PRIVATE LIMITED
1st Floor RMZ Galleria Office Block Bengaluru-Bellary Road, Yelahanka Bengaluru -560064, Karnataka, India Website: www.raddef.co.in Phone: +91- 6360796080 Converting concepts into technical requirements and the associated tradeoffs. Effective communication skills, including the ability to concisely explain complex issues to non-experts.
FPGA Engineer Masters degree in the field of Electronics, Electrical
and computer science engineering Proficient in operating the simulation and modeling equipment including the designing tools Well acquainted with the basic characteristics of the digital designing instruments Possess an expertise in the typical FPGA improvement platforms such as Actel Xilinx, Altera, etc. Knowledgeable about the high speed DSP and I/O and integrated CPU Able to execute the chip enhancement procedures including the procedures related to synthesis and time investigation.
RF Engineer Develop test and debug strategies to isolate
problematic performance areas Provide solutions to technical problems associated with radio frequency engineering products Design and enforce RF circuits, filters, baluns, power amplifiers and lumped element matching circuits Prepare analysis and simulation reports, write test plans and perform evaluation Collaborate with test engineering and operations in support of production