Professional Documents
Culture Documents
T.L.E. 7
1. Which tool is used for hardware to stand on to prevent static electricity from building up?
a. Anti-static mat b. Hex driver c. Philips head screwdriver d. Wire cutter
2. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way that a screwdriver tightens
screws? a. Anti-static mat b. Hex driver c. Philips head screwdriver d. Wire cutter
3. In what direction must the screwdriver turn to tighten the screw?
a. Clockwise b. Counter clockwise c. Upward d. Downward
4. What does “ES” in ESD tools stand for?
a. Electric-Status b. Electro-Static c. Ethereal-State d. Electronic-Station
5. Which tool is used to blow away dust and debris from different computer parts without touching the components?
a. Hex driver b. Compressed air c. Anti-static mat d. Wire cutter
6. What do you call a magnetic storage device that is installed inside the computer?
a. Flash Drive b. Hard Drive c. Floppy Drive d. Optical Drive
7. All are examples of workplace hazards EXCEPT for one, which one is it?
a. frayed electrical cords b. boxes stacked precariously
c. noisy machinery d. books stacked neatly in bookshelves
8. What type of hazard that involves machinery or electronic equipment?
a. mechanical hazard b. chemical hazard c. physical hazard d. bio hazard
9. It is represented by a rectangle. It refers to an action in a business process. What element in the flowchart is being
described?
a. Terminator b. Decision c. Connector d. Process
10. What symbol represents an individual step or activity in the process?
a. Triangle b. Box c. Circle d. Oval
11. Which tool is used to strip and cut wires?
a. Anti-static mat b. Philips head screwdriver c. Hex driver d. Wire cutter
12. Which tool is used to retrieve parts from location that are too small for your hand to fit?
a. Part Retriever b. Cable ties c. Lint-free Cloth d. Flat head screwdriver
13. A drafting tool used for drawing horizontal lines. What tool is being used?
A. Compass B. Triangle C. T- square D. Triangular Scales
14. Which of the drafting material used for fastening the drawing paper on the drawing table?
A. Compass B. Divider C. Masking Tape D. Triangle
15. The main function of this tool is to reproduce the measurements of an object to any size. What tool is being
described?
A. Compass B. Protractor C. Triangle D. Triangular Scales
16. Which of the following drafting tool is used to protect the rest of the drawing when removing unnecessary
lines?
A. Erasing Shield B. Eraser C. Masking Tape D. Pencil Sharpener
17. Which of the following drafting tool is used when drawing vertical lines.
A. Compass B. Triangle C. Triangular Scales D. Ruler
18. What is the system for graphically representing an object by line drawing on a flat surface?
A. Orthographic Projection B. Pictorial Drawing C. Multi-view Drawing D. Isometric Drawing
19. What are the quadrants/angles of projection generally used for drafting purposes arc?
A. Ninety degrees and Forty Five Degrees B. First Angle and Third Angle
C. Second Angle and Fourth Angle D. Thirty Degrees and Sixty Degrees
19. What is the standard projection used by many European countries and also called as ISO Standard?
A. Orthographic Projection B. Third-angle Projection
C. Isometric Projection D. First-angle Projection
20. In multi-view drawing, what are the common views used ?
A. front, top, and sides B. front, rear and sides
C. front, sides and rear D. front, top and rear
21. What form shows proof or receipt of goods or services?
A. delivery receipt form B. purchase order form C. inventory form D. requisition slip form
22. What form contains specified quantities of described goods at agreed terms and at a designated time and
place?
A. delivery receipt form B. purchase order form C. inventory form D. requisition slip form
23. Which of the following form is a printed document on which a request is made?
A. delivery receipt form B. purchase order form C. inventory form D. requisition slip form
-----------------------------------------------------GOD BLESS-----------------------------------------------------------------
SINAWILAN NATIONAL HIGH SCHOOL
Sinawilan, Matanao, Davao del Sur
HOUSEKEEPING
1. Hotels have a mandatory __________ rule for room attendant upon entering the room.
a. two-knock, three-announcement rule
b. one-knock, two-announcement rule
c. three-knocks
d. b and c
2. Hotel rules are designed for____________.
a. discipline b. mastery c. security d. a and c
3. Interpersonal skills or people skills are the
4.