Professional Documents
Culture Documents
GUIDELINES
FOR
TRAFFIC SAFETY BARRIERS
Published by:
Price : ~ 300/-
(P/us Packing & Postage)
IRC:119-2015
Contents
S. No. Description Page No.
6. General Recommendations 27
Annexure- I 29
Annexure- II 30
References 30
IRC:119-2015
Members
4. Basu, S.B. Chief Engineer (Retd.), MORTH, New Delhi
5. Bongirwar, P.L. Advisor, L & T, Mumbai
6. Bose, Dr. Sunil Head, FPC Divn. CRRI (Retd.), Faridabad
7. Duhsaka, Vanlal Chief Engineer, PWD (Highways), Aizwal (Mizoram)
8. Gangopadhyay, Dr. S. Director, Central Road Research Institute, New Delhi
9. Gupta, D.P. DG (RD) &AS (Retd.), MORTH, New Delhi
10. Jain, R.K. Chief Engineer (Retd.), Haryana PWD, Sonipat
11. Jain, N.S. Chief Engineer (Retd.), MORTH, New Delhi
12. Jain, Dr. S.S. Professor & Coordinator, Centre of Transportation
Engg.,Dept. of Civil Engg., liT Roarke, Roorkee
13. Kadiyali, Dr. L.R. Chief Executive, L. R. Kadiyali & Associates, New Delhi
14. Kumar, Ashok Chief Engineer (Retd.), MORTH, New Delhi
15. Kurian, Jose Chief Engineer, DTTDC Ltd., New Delhi
16. Kumar, Mahesh Engineer-in-Chief, Haryana PWD, Chandigarh
17. Kumar, Satander Ex-Scientist, CRRI, New Delhi
18. Lal, Chaman Director (Projects-Ill), NRRDA (Ministry of Rural
Development), New Delhi
19. Manchanda, R.K. Consultant, Intercontinental Consultants and
Technocrats Pvt. Ltd., New Delhi
20. Marwah, S.K. Addl. Director General (Retd.), MORTH, New Delhi
21. Pandey, R.K. Chief Engineer (Planning), MORTH, NewDelhi
22. Pateriya, Dr. I.K. Director (Tech.), NRRDA, (Ministry of Rural
Development), New Delhi
23. Pradhan, B.C. Chief Engineer, National Highways, PWD, Bhubaneshwar
24. Prasad, D.N. Chief Engineer (NH), RCD, Patna
25. Rao, P.J. Consulting Engineer, H.No. 399, Sector-19, Faridabad
IRC:119-2015
Corresponding Members
1. Bhattacharya, C.C. DG (RD) & AS (Retd.), MORTH, New Delhi
2. Das, Dr. Animesh Professor, liT, Kanpur
3. Justo, Dr. C.E.G. Emeritus Fellow, 334, 14th Main, 25th Cross,
Banashankari 2"d Stage, Bangalore
4. Momin,S.S. Former Secretary, PWD Maharashtra, Mumbai
5. Pandey, Prof. B.B. Advisor, liT Kharagpur, Kharagpur
Ex-Officio Members
1. President, (Bhowmik, Sunil), Engineer-in-Chief,
Indian Roads Congress PWD (R&B), Govt. ofTripura
2. Honorary Treasurer, (Das, S.N.), Director General (Road Development),
Indian Roads Congress Ministry of Road Transport & Highways \0,
3. Secretary General,
Indian Roads Congress
ii
IRC:119-2015
1 INTRODUCTION
Traffic Safety Barriers, also known as Crash Barriers, are provided on high speed highways
to prevent accidents when vehicles lose control and run off the road. Especially dangerous
are road sections with sharp cu.rves, approaches to bridges wi'th restricted roadway, high
embankments, hazardous obstacles such as poles, trees and bridge structural elements.
Experience has shown _that if suitably designed and properly located, it is possible to redirect
· the vehicle nearly parallel to the direction of the barrier, contain within tolerable limits the
forces experienced by the vehicle occupants, minimize the severity of the accident and reduce
the damage to property. In view of the highly cost-effective safety provided by these devices,
they are being extensively used on modern high speed highways. The present guidelines
have been prepared taking note of the best international practices.
The Road Safety and Design Committee (H-7) deliberated on the draft in a series of meetings.
The H-7 Committee finally approved the draft document in its meeting held on 251h March,
2014 and decided to send the final draft to IRC for placing before the HSS Committee.
T-he Composition of H-7 Committee is as given below:
Kadiyali, Dr._L~ R. -------- Convenor
Prasad, C.S. Co-Convenor
Tiwari, Dr. Gee tam Member Secretary
.. ':_ ~ -.
Members
Ahuja, Manoj Sreedevi, Ms. B.G.
Ahuja, Yuvraj Singh The Add I. Director General of Police
Bahadur, A.P. (Traffic & Road Safety), Bangalore
Balakrishnan, Mrs. Bina C. The Chief Engineer & Director, GERI
Gupta, D.P. The Director, QAR (Formerly HRS),
Jain, Dr. S.S. Chennai
Mohan, Dr. Dinesh The Director, Transport Research
Pateriya, Dr. I.K. Wing, MORTH
_..., -.
Ex-Officio Members
President, (Bhowmik, Sunil), Engineer-in-Chief,
Indian Roads Congress ·. PWD (R&B), Govt. of Tripura
Honorary Treasurer, (Das, S.N.), Director General
Indian Roads Congress (Road Development), Ministry of
Road Transport & Highways ·
Secretary General,
rndian Roads Congress
The Highways Specifications & Standards Committee (HSS) approved the draft document
in its meeting held on 9th August, 2014. The Executive Committee in its meeting held on
18thAugust, 2014 approved the same document for placing it before the Council. The Council
in its 203rd meeting held at New Delhi on 191h and 20th August, 2014 approved the draft
"Guidelines for Traffic Safety Barriers" for publishing.
For preparing this document, literature published by Organisations like American Associations
of State Highways and Transportation Officials, (AASHTO) has been consulted. Indian Roads
Congress acknowledges with thanks the .kind permission given by AASHTO.to use some of
their Figures and ~nnexures of this document. ·
ColTiageWay
~~
Shoulder
.... ' :· ..: .: ...
\ ~ .... . ...
.
?
IRC:119-2015
Road edge barriers usually consist of metal or concrete beams mounted 30-60 em above
the ground on strong posts of wood, concrete orsteel. These posts are either driven into
the ground to a depth of about 110 em or inserted into holes which are then back filled. This
serves the purpose of absorbing energy as the p()sts move in the ground upon impact. Wire
ropes (Cables) attached to posts by means ofspring brackets also are in use.
Median Barriers of the rigid type are popularly known as the New Jersey concrete barrier,
because of its origin and popular usage in that State jn USA Other types are the double-
faced steel beams on posts and cable (wire).
Depending upon their mode of performance, traffic safety barriers can be classified generally
as:
1. Flexible [e.g., Cable (wire) type barriers]
2. Semi-rigid [e.g., Steel beam type barriers]
3. Rigid [e.g., Concrete barriers]
The major difference among the various types is the amount of deflection that takes place in
the barrier when it is hit. The flexible system is the most yielding type. Cable (wire) type barriers
fall under this category. This system facilitates containment of the vehicle and also redirects
it. It deflects considerably on being hit and thus requires considerable lateral clearance from
fixed objects. The wire rope barrier has the minimum impact severity on the occupants of
the vehicle. The semi-rigid system offers requisite resistance to control the deflection of the
longitudinal member to an acceptable limit and the errant vehicle is redirected along the
travel path. Steel beam barriers belong to this category. Rigid barriers do not deflect on
impact, and cause the maximum severity of impact amongst the three types. The installation
of a rigid system should be considered where small angles of impact are expected, such
as along narrow medians or shoulders which could be expected in urban situations. As the ·
system suffers little or no damage on impact, it requires the least maintenance effort. Fig. 3
shows the three types.
UPPER ROPES ~STEEL W BEAM
CONCRETE BARRIER
I I
I I
LJ
LOWER ROPES
-POST -STEEL CHANNEL
II II
II II
lLll
BARRIER
A '
'
.
. ·.
2. The barrier system must contain and redirect the vehicle at design conditions,
not allowing it to penetrate or vault over the barrier.
3. It must not cause sudden acceleration or spin of the vehicle.
4. The vehicle must remain upright during and after the impact and there should
not be any loose elements which can penetrate the vehicle.
5. After impact, the final stopping position of the errant vehicle must intruoe
only minimally into the adjacent traffic lanes.
6. It must provide good visual guide to the road us.er~.
4.1 . Definition
Aro'ad edge barrier, also .known as roadside barrier, is a longitudinal system used to shield
vehicles from hazards on the edge of a road.
4
i .
IRC:119-2015
11/2:1
0.6
0.5 2:1
0.4 21/2:1
~
'"
~
3:1
"'a.
0 0.3
U)
c
0
:g 4:1
"
Vl
··=
G:- 0.2 5:1
6:1
0.1 10:1 ..
0.0
0 3 6 9 12 is 1B
fill Section Height (m)
5
IRC:119-2015
the least hazard potential. Fig. 6 shows the suggested criteria for determining the clear zone
on fill and cut sections for three different vehicle-operating speeds for unrounded shoulder-
slope corner. Non-transversable hazards or fixed objects should be removed, relocated or
shielded by a barrier if they are within the indicated minimum clear zone width. A "Clear Zone"
is 'that roadside border area, starting at the edge of the carriageway, available for safe use
by errant vehicles'. Establishment of a minimum width clear zone implies that rigid objects
and certain other hazards with clearances less than the minimum width should be removed,
relocated to an inaccessible position or outside the minimum clear zone, remodelled to make
safely traversable or breakaway or shielded. Fig. 6 shows the clear zone width, speed and
slope criteria.
rCLEAR-ZONE DISTANCE 11.00l
*
CLEAR RUNOUTAREA
*THE CLEAR RUNOUT AREA IS ADDITIONAL CLEAR-ZONE SPACE THAT IS NEEDED BECAUSE A PORTION OF THE SUGGESTED
CLEAR-ZONE (SHADED AREA) FALLS ON A NON-RECOVERABLE SLOPE
....··
* All roadside obstacles within the clear zone should be removed if possible, otherwise provide
barrier protection.
6
IRC:119-2015
Fixed Objects within Clear Zone as Determined by Fig. 5 Traffic Barrier Required
Yes* No
Sign, traffic signal, and luminaire supports
Breakaway or yielding design with linear impulse
Less than 4895 N- sec X
Notes: (1) Fixed objects should be removed or relocated so that a barrier is unnecessary if
practical.
(2) Breakaway or yielding design is desirable regardless of distance from carriageway.
Large sign supports are formidable obstacles and require protective treatment. Where
continuous guard-rail is not available, sections of barrier should be introduced in front of the
supports, the length in advance of a sign being not less than 25m and preferably 40 m. The
approach end should be flared and anchored. The barrier should normally extend 25m or
more beyondthe sign support when not anchored, and at least 8 m when anchored. The off-
set between the face of the barrier and the support should not be less than 0.6 m, or if the
support has a concrete base, it should not be less than 0.5 m.
Protection against collision with lighting columns is difficult, because the columns are
numerous and are located relatively close to the road edge. Where continuous barrier is
:.>
not justified, columns may be installed without protection, if they are lightweight and are set
atleast 0.75 or 0.9 m beyond the edge of the useable shoulders. Where barriers are provided,
the lighting columns shouJd be set not less than 0.5 m, and preferably 0.6 m behind the face
of the barrier. Short sections of barriers are not recommended at each.lighting column as a
general practice.
4.3.3 Bridge Rail Ends, Transitions and End Treatments
Fig. 7 summarises the warrants for an approach barrier to a bridge. The criteria for clear zone
requirements given in Fig. 6 apply here also. If an approach barrier is warranted, adequate
transition section between the approach barrier and the bridge railing is needed. If the end of
the approach barrier terminates within the clear zone, a crash worthy end treatment is also
warranted.
7
IRC:119-2015
1:3
Exomple-1 1:4
1-6 Slope
(Fill Slope)
100 Km\h 1:5
5000 V.P.D
1:6
1:8
'JI 1:10
8.
Answer 0
1ii
Clear Zone
Width = 9m 1:20 Fill Slopes
Flat
1:20
Exomple-2
1-6 Slope Cut Slope
'JI 1:10
(Cut Slope) <I)
a.
750 V.P.D. 0 1:8
1ii Obstacle
t :6
1:5
Answer
Clear Zone 1 :4
Width = 6m
1:3
I
3
I
I
I
I
~
I I
,
I
I
12
I
I
I
I
I
. 15
I
I
I
18
I
I
I
I
21
I
I
I
I
24
I
I
I
I
27>!
I
30,
0 3 9 12 15 18 21 24 27
T
Over 6000 Design A.D.T ) I· I I I I I I
I I
I I I
0 3 6 9 12 15 18 21
0 3 6 9 12 15
8
IRC:119-2015
- B r idge Roil
. Shculd•r_ j
ol/b l
8: 1 5:1
10:1 6: 1 4:1 3:1 2:1 ol/bl
8:1 ~:1
10:1 2:1
0.5
0.4
0.4
g>
0.3
3:1
g 3:1
~ " 0.3
(/)
0 "'
.D
;:;- '
1l 4 :1
~ ! 4 :1 N
~
0'
"'
';;-
0.2 5: 1
l 0. 2 5:1 ~
6:1
"' 8:1
6:1
8:1
0.1 . 10: 1 0.1 10:1
(F1ot) ( Fiot)
0 0
0 0.1 0.2 0.3 0.4 0.5 0 ( F'k!t) 0.5
0.1 0.2 O.J 0.4
F'ront Slope • b1/a l Front Slol)e • b1/c1
Fig. 8 Preferred Ditch Sections for : Fig. 9 Preferred Ditch Sections for:
(a) Vee Ditch; or (a) Trapezoidal Ditch, Bottom Width 1.22 m to 2.44 m; or =
(b) Round Ditch, Bottom Width < 2.44 m,; or (b) Round Ditch, Bottom Width= 2.44 m to 3.66 m
(c) Trapezoidal Ditch, Bottom Widh < 1.22 m,; or (Source: Ref. 1)
(d) Rounded Trapezoidal Ditch, Bottom Widh < 1.22 m
{Source: Ref. 1)
If the cause of accidents at black spots is the sharp ·radius of curve or presence of roadside
fixed objects like piers, abutment$, traffic sign supports, the provision of W-beam safety
barriers will protect the vehicles from running off the road or colliding against the fixed objects.
On sharp curves, theW-beam barriers should extend to 100 m beyond the beginning and end
of the curves. For protection frqm colliding against fixed objects,. the safety barriers length
should be suffiCient enough to protect the fixed objects from the impact of errant vehicles.
10
IRC:119-2015
for a high strength barrier, even though the initial cost will be high, the maintenance costs will
IRC:119-2015
be low. However, if the strength of a barrier is not upto the mark initially, it will require more of
maintenance and, therefore even though the initial cost may be low, the maintenance costs
will be high.
4.4. 7 · Aesthetics and Environmental Considerations
Aesthetics are generally not the controlling factors in the final selection of a roadside barrier
except that i!l recreationaf areas or parks, the barrier whicn blends well with the surroundings
should be selected. However, the selected systems should be crashworthy. Certain types
of railing may deteriorate in highly corrosive urban/industrial environments; in such harsh
environments, use of galvahised steel and painting with anti-corrosive paints must be resorted
to. Also, the possibility of using corrosion resistant materials like aluminium or cement
concrete must be explored in such harsh environments. Where solid barriers are used, care
must be taken to see that .these. barriers do not restrict sight distance of motorists.
4.4.8 Field Experience
Documented proof of a barrier's field performance is of paramount importance. The.re is little
reason, if at all, to install a barrier for which the performance record is not available. In the
Indian context, impact perf,ormance and repair cost data must be maintained by the concerned
highway agency and made available to engineers responsible for selecting and installing
traffic barriers. A format for recording the performance details is enclosed·at Annexure I. .
12
IRC:119-2015
al >---< o2
Wldth
al/b1
6;1 5,1
2: 1
o.s 2:1
:d'
.,,···:>;:~: :t~? ,.
~~
0.4
<800
"'
~ J! t II II
~
0.3
II II
'
& II -n--~~~ ~· Secii!M)
~ 4:1 II
i 0.2• 5:1 ~ II
II
15:1 II
6:1
II .,. . . . l'IIMDW. C'O!'JlttlC'Il!B
II
0.1 10:1
.:'~~~{r.1f··n1
II
II II
CCifWC'1'I:I) klc:tTIO ....
(Fial) ~·------' IVTTtiNHa!OI,._,..:JI..JS I
ltl'lii'S~OlO I
~ILOCJ(h(IH[ I
·llllQ!f~II-'IOU
0 (Flat) 0.1 0.2 O.J 0.4 0.5
'
f ront Slope • b1/a1
Fig. 10 Preferred Ditch Sections for: Fig. 11 Typical Details of 'W' Structural Elements
(a) Trapezoidal Ditch, Width > 2.44 m,; or
(b) Round Ditch, Bottom Width >3.66 m,; or
(c) Round Trapezoidal Ditch, Width > 1.22 m
(Source: Ref. 1)
4.8 Advantages of Using Channel Sections vis a vis i~Section
It is interesting to observe that most of the American designs adopt channel sections in
preference to !-sections for a variety of reasons. The channel sections make the connections
with other components of the barrier system much more convenient than for 1-:sections. In
general, the flat surface area exposed in channel sections is more than wrat can be made
· available with 1-sections. Under the same load, a channel section will deform more than a
corresponding 1-section, thus reducing the magnitude of impact on the impacting vehicle.
Lastly, channel sections are more economical than !-sections.
4.9 · Minimum Length of Safety Barriers and foundation Details
The minimum length .of safety barrier sha!l be 50 m. For barriers at hazardous location 2/3rd
of length shall be before ~he hazard and ' 1t3rd after hazard. The overall design·. length and
foundations shall be such that meet the specifications given in Annexure II.
. '
l(
· 4.10 . End Treatment for Steel Edge Barriers
An untreated end of the roadside barrier can be hazardous if hit, because the barrier beam
can penetrate the passenger compartment and cause ·the impact vehicle to stop abruptly.
End treatments should, therefore·, form an integrat part of safety barriers. An end treatment
should not spear, vault or roll a vehicle for head-on or angled impacts ..
The end treatment on approach shall be Modified Eccentric Loader Terminal (MELT)
arrangement as shown in Fig. 13 and departure sides it shall be Trailing Terminal (TT)
arrangement shown in Fig. 14. Following the same end treatments, Fig. 15 gives the typical
layout of W-beam whether on raised median sides or on depressed/flushed median sides.
1~
IRC:119-2015
r~· -
(1 o..-.1~)
r
'f 0
.~
[>·
I L
• ")
"'·'·"'"""'ll
···<~·;,1
. II
II
II
II
II
II
II
II
II
II
II
II
II
II
"---"''--- - -...1
PJIW!I Gr Tllll mw "IllER
~ II ! l , ~
~--~
mJ
APPROACH SIDE ! -
'= - ~I ~i - Dl~ECTION 1- I - !
r
i TRAFAC
~ t ~ f
- ~----~--- ~ ~-~- ~ -- ~ -~- ~--~- ~ --- ~ --- + --- ~-
. P~N
® ~ ~ -~ ~ <1) -~ -
' '
2000 2000 1330 1 !330 2000 2QQQ i1 2000 2000 2QQQ.
R=6m Straight STRAIGHT STRAIGHT 1
. . . ou,
-acu ,....... 00010 lHOOUOt I
'hUB£R PO$l lr: RM.
I!EilTNGJINI ~ I.INOOI
HeAD NlO frlliT
- -sTEEL 1\JBE
- -----sTEEl. 1U8E (Ree-w
S.t.C Ttiwt tot Short
Tlniw~Paal) Note: All dimension~ are in milimeter(mrn)
POSTNO.:P!
oJ- ~
I
r
-.-
;
Ir - - , -~ DEPARTURE SIDE
~~2~00
I
~0~~~20~0~0--~~20~
0~0~
Ra 6m I
I
i
I
I
.
t
DEPARTURE SJDE
IltV;;~~~~~l:'fr~";~~;;-l!-.~~~~='~~c~~~
lll l;==='""-"'--=~r~=:--o'"'--""0'0-'-': r·
j-li'~.=.----~..,=~
- I ------- ~ -
.I '
;
END POST
. .f END POST
-- - - - -i--- --r
I I
-- - ~ - - ~ - -- - - - ~ -- ~ - -
ELAN L_ A MELT Arrangement
1t:;
IRC:119-2015
At road cross sections in cutting or if the road transitions from cut to fill, the safety barriers
can be anchored in backs lopes. The backslope covering the anchored portion of the barriers
should be graded flat, with side slopes preferably not steeper than 10:1. The anchored portion
should develop tensile strength in the rail element to prevent the rail from pulling out of the
anchorage. The barrier can also be anchored in an earthen berm specially constructed for
this purpose, provided the new berm itself is not a hazard to the traffic. The earthen berm
should be made resistant to erosion.
·r·
Concret•
1...---smAtCHT PORno~
, .
l ;W----··-~-s_?AC~ ~"f!!'~--.r--···- -: ·---···--2~~·oo m"r-'l.· ----··. ·~····-·-----· . ···tt
,Si f! i
~ ~ ~ r ~ t·'-0::s:::.~
. ,_,SMC l50x7»6
r r ·~I
~-- --------·----~---T1!l'L~~S:!t.~'l!~-~l!~~!~~-£rc<~h B<!!:!!!'L~-f-~LI!!!?!P~ ~~r;__C!_TtO ----~~-~----·- -.. - ----- -·· - · .• .•• -~------ --·--· ..... J
II
.H
u
Hi
IRC:119-2015
5 MEDIAN BARRIERS
5.1 Definition
As the name suggests, median barriers are those that are provided in the fnedians of
· highways. They accordingly protect the traffic on both the·carriageways. They are intended
to prevent head-on collision_s, especially on highways with narrow medians, caused by out-
of-control vehicles jumping across the medians. They also shield fixed objects on the median
from the traffic flow.
5.2 Warrants
The requirements of a median barrier is a function of the width of the median and the traffic
volume on the road. Fig. 22 indicates the warrants for provision of median barriers in terms
of the combination of median width and Average Daily Traffic (ADT) in PC Us (Passenger Car
Units). AtADT less than 20,000 PCUs and with medians wider than 9 m, the probability of a
vehicle crossing across the median is relatively low and median barriers in such cases are
optional. Medians with width between 9 and 15 m do not warrant a barrier unless there is an
adverse history of median cross-overs.
17
IRC:119-2015
5 12 1--- - ! -- -
f
I ·t-----+~
20 40
A¥wof•Ooq T•oKoe (lhovMitd PCU.)
8oMd On ' Yeor ~J«;tion
18
-·''··· ...... - .... ,.. ,.,........ . ... ......................." ,............·-..:.:.~~~:.:o.:.::.:::.:L:::J;:t.:::o::~:·:::.:.:.~-:.'.;:;;;;;;;·.-~~;~·:.:.:;::.-r·'~··''"'·' ··· . . ,......"' "'~..,...:...·.wJ:.:)::~.;;.~·:,,~~;:::~ ;-;;.;~~:~·;·~:.:~.. \:'~'~'~".:.::.·::~:.:.:...:..~:.:., ..,~~~:..·;.. .:-......~.. ~.-.:. .. . :~·.:•
# ·. . . • • • • ; .-_ _ .., . ~
. . . , .... . . : • • .... . . . . - ... . . . .:... . . .. ... ~. . . . ..
·· ·: ·,'··~=~'-'i:·.';.·;~:~'t..:·:\~/.\:;.,:);:.•~; 1;:-.':;~~:-":-.(·;o~,:t:~~;~·~
MAXIMUMlOOmnFROM
:;;~~!6~ _1~:.~:----- -- -~E~_ -----.. -.-...-. -
500
TrtERE MUST BE AT LEAST
1000 CU:.\RANCE &'l\\UN
l HE BACK Of" THE W-8EAM
POST AND ANY SOLID OS.fCT
__.,., ..................__
,..,.._600mmM1111mum : 750mmto 1000mm Mtmmum
;...,.. __ -.... - ~-. -- ... - .r
! :
KERB .!!_BEAM ON_RAISED MEDIAN KERB
... ~1
.,
.
;;o
W-8~~.A!J.:.I:!~_CENTE..B.9£..E!::..I.§~D I DI;PRI;§SEO MEO~~
()
......
Fig. 17 Lateral Clearance for Different Barriers ......
CD
N
0
......
CJl
IRC:119-2015
20
IRC:119-2015
sections) are two important features to be considered. A kerb, either wht:n used alone or
when placed in front of a median barrier, should not be used for purposes of redirecting errant
vehicles. For sloped medians, the recommendations are shown in Fig. 23.
5.3.8 Aesthetic and Environmental Considerations
The same, considerations as applicable to. roadside barriers also. apply,to T ed ian barriers.
... ~ ~ ·, . . .
PLAN VIEW
I :: l :: . I , . . . . . •.
-u ----£--- -!-----l---c--. --f----------f-----~--~~-4-----~ili--~u-
. . f . " :
CONCRETE
FOOTING
SECTION A-A
?1
IRC:119-2015
~ ~
3- ROPE WIRE IN~ERWO\IEN RoPE SAFETY eAR~IER. SECTION X·X
I· • • •• 1
·..
??
lj"
.,
;J
d
11 IRC:119-2015
'I
'J
~!
A profile of the concrete median barrier constructed in-situ and anchored to the carriageway
by dowels is given in Fig. 26. A design with pre-cast units is given in Fig. 27.
_;
i . . .:_ a:jm
:
~lC
- ; DIREbo - ·;_ ,
.
i
'
.
; ; : ' ;
- - - - - - - - - - :- - - - ~---- r - - - - ! - - '1"' - - - --1 - - - - ~ ---- r- ---
- ~N
+--- -i.;
~ ~ -~ e ~ ~ ~ @ @ ~ Ell
I
' I I
.. w BEAM
WIRE ROPE ;
i
'
~- tp ~ e. e ® ® e @
I
..
i
:'If BI!All ''
i l
I ! i
The method of attaining the transition at the end of the installation is illustrated in Fig. 28 .
. The barriers shall be termfnated sufficiently away from the median openings with the twin
objectives of preventing impact by the turning traffic and providing adequate sight distance
to the turning traffic.
ILLUSTRAT10N 2
DI.USTRATION 3
IIWSTRAT10H of
llJ.IJSTRAnON $
ULUSTRATtOH 0
?4
IRC:119-2015
.58mm
Covor 12mm C 150mm HYSD
Allround c/c
25mmx400mm Dowels
At End Joints
NOTE:
Anchored In 2~mm HYSD High- Yield StrerH3th Deformed Reinforcement.
Asphcltlo Conctoto
25
IRC:119-201 5
6000
J
A
~·
'~··f - 1
~2mm ; HYSO.
~ p:, Bora l
·u· Bors '·
r-. 1•/
I I Female
End Keyway
Mole
810
To
850
Detail " B •
/Bor ' V' 90mm R
v
f!\
J
1-t---
I SOR
~[ t-v ~\\ I;
~ l\/25mmR
Bar ' v ' - Lifting Hooks
12mm ~ HYSO
75
To p; ~
~
....... lmz
-j 315 ,_
125 Cont. Keyway
At Bottom Bar ' U '
Notes:
12mm ~ HYSO 1. · Concrete M 30 Grode
360 2. Place On 25mm Crout Bed
30 HYSO Reinf orcing Bars.
View A-A
1-,so-j 800
T
1
t ~
~ A B c 0 G H
PLAN
26
IRC:119-2015
"A"
0
0
10
0
~·
-
0
0
DETAIL - 'A'
·.. ,::: .:
.~ ·~
, I •: I,
CONCRETE SAFETY BARRIER
6 GENERAL RECOMMENDATIONS
27
IRC:119-2015 ·
6.2 Maintenance
6.2.1 Routine Maintenance
Routine maintenance comprises only occasional cleaning and painting; ,right-of-way mowing
of grass and vegetation control. However, if preservative-treated wood posts and galvanised
steel posts/ rail compartments are used, there is only a nominal routine maintenance
requirement.
6.2.2 Collision Maintenance
All repairs or adjustments to barriers that are necessitated by vehicle impact fall under this
category of maintenance. Bulk of the maintenance costs are usually due to collision repairs
and these costs, to a large measure, influence the selection of the most appropriate system.
The number of impacts that may be expected to occur will depend on the traffic speed and
volume, distance between the edge of carriageway and barrier and .road geometries. The .
extent of barrier damage naturally depends on the strength of the railing system, given a
particular impact situation. On very high speed facilities like expressways where the raiL
repair is difficult and collisions with the barrier are frequent, a rigid traffic barrier is to be
preferred. ln flexible barriers, the possible re-use of the post and rail systems after a vehicle.
impact is to be considered; if beyond repair, enly the salvage value is to be considered.
6.2.3 Simplicity in Design; Material and Storage
The expertise required for the repairs on the part of the repair team of technicians should be
an important consideration in the selection of a particular barrier system. The design of the
barrier system should be such thatit is easy to repair any damaged components or to replace
them. It is always advantageOUSJ,~O t:Jse only a few barrier systems along the highways for
which the various components are standardised, so that the needed repairs to a barrier, after
being hit by a vehicle, can be carried outcomiemientlyand expeditiol!sly.with the spare parts
stored in adequate numbers/quantities.
28
IRC:119-2015
ANNEXURE I
.l FORMAT FOR RECORDING FIELD PERFORMANCE OF SAFETY BARRIERS
ANNEXURE II
SOURCE REFERENCES
1. Guide for $"electing, Locating and Designing Traffic Barriers, American Association of
State Highway and Transportation Officials, 1977.
2. B.S. 6579: Part-7: 1988, Specifications for Concrete Safety Barrier, British Standards
Institution, London, 1988.
30