Professional Documents
Culture Documents
1. Two wrenches are used to tighten the pipe. If the pipe is made
from a material having an allowable shear stress of τallow = 85
MPa, determine the allowable maximum force P that can be
applied to each wrench.The pipe has an outer diameter of 25
mm and inner diameter of 20 mm.
3. Two solid steel shafts are fitted with flanges that are then
connected by bolts as shown. The bolts are slightly
undersized and permit a 1.5o rotation of one flange with
respect to the other before the flanges begin to rotate as a
single unit. Knowing that G = 11.2 x 106 psi, determine
the maximum shearing stress in each shaft when a torque
of T of magnitude 420 kip.ft is applied to the flange
indicated.
Selamat bekerja,
AIM, FF