Professional Documents
Culture Documents
1. Skeletal and cardiac muscle, which are both striated, at resting length contain an A band in each
sarcomere. This A band contains:
Answer. C. The A band is the region of the thick (myosin) filaments. Since at resting length there
will be some overlap between the myosin and actin filaments, the A band will also contain some
actin.
(A) A decrease in the width of the I band (D) All of the above
(B) A decrease in the width of the A band (E) A and B
(C) An increase in the width of the H zone (F) None of the above
Answer: A. A band: the length of thick filament, remain unchanged during contraction. The
width of both I band and H zone decrease during contraction due to cross-bridge interaction
between thin and thick filaments.
3. Which of the following decreases in length during the contraction of a skeletal muscle fiber?
Answer: B. The physical lengths of the actin and myosin filaments do not change during
contraction. Therefore, the A band, which is composed of myosin filaments, does not change
either. The distance between Z discs decreases, but the Z discs themselves do not change. Only
the I band decreases in length as the muscle contracts.
4. A person lifting up their physiology textbook contracts their bicep muscle isotonically. Which
one of the following does not change its length in this process when compared to when the
muscle is at rest?
Answer: B. The A band represents the area of the sarcomere that is made up of the thick
filaments. The length of the thick filaments do not change during any type of
contraction. Therefore the A band does not change length during an isotonic contraction of the
biceps muscle.
5. A cross-sectional view of a skeletal muscle fiber through the H zone would reveal the presence
of what?
Answer: E. The H zone is the region in the center of the sarcomere composed of the lighter
bands on either side of and including the M line. In this region, the myosin filaments are centered
on the M line, and there are no overlapping actin filaments. Therefore, a cross-section through
this region would reveal only myosin.
6. Which of the following binds Ca2+ in order to uncover the active site on F-actin?
7. A 64-year-old man was admitted to the hospital with edema and congestive heart failure. He was
found to have diastolic dysfunction characterized by inadequate filling of the heart during
diastole. The decrease in ventricular filling is due to a decrease in ventricular muscle compliance.
Which of the following proteins determines the normal stiffness of ventricular muscle?
Answer: D. Titin is a large protein that connects the Z lines to the M lines, thereby providing a
scaffold for the sarcomere. Titin contains two types of folded domains that provide muscle with
its elasticity. The resistance to stretch increases throughout a contraction, which protects the
structure of the sarcomere and prevents excess stretch.
Excitation-Contraction Coupling
8. In skeletal muscle, which of the following events occurs before depolarization of the T tubules in
the mechanism of excitation-contraction coupling?
9. Which of the following best describes the action potential of skeletal muscle upon stimulation?
(A) It spreads inward to all parts of the muscle via the T-tubules
(B) It has a prolonged plateau phase
(C) It causes the immediate uptake of Ca2+ into the lateral sacs of SR
(D) It is longer than the action potential of cardiac muscle
(E) It is not essential for contraction
Answer: A. Depolarization of the muscle fiber is essential for initiating muscle contraction. The
action potential transmitted to all of the fibrils along T-tubules, triggering the release of Ca2+
from the lateral sacs of the SR next to T-system. It is shorter than the action potential of cardiac
muscle and doesn't have a prolonged plateau phase.
Answer: B. Because of this spread, the muscle can contract as a unit. All other choices are
opposite.
11. Depolarization of the T tubule is directly linked to the opening of Ca2+ channels on the
sarcoplasmic reticulum (SR) of…
Answer: A. Ca2+ released from SR depends on voltage-gated Ca2+ channels in skeletal muscle,
and Ca2+-induced Ca2+ channels in cardiac muscle.
12. In a normal, healthy muscle, what occurs as a result of propagation of an action potential to the
terminal membrane of a motor neuron?
Answer: E. The neuromuscular junction is equipped with a so-called safety factor that ensures
that every nerve impulse that travels to the terminal of a motor neuron results in an action
potential in the sarcolemma. Given a normal, healthy muscle, contraction is also ensured. The
voltage sensitivity of the Ca2+ channels in the presynaptic membrane and the high concentration
of extracellular Ca2+ ensure an influx of Ca2+ sufficient to stimulate the fusion of synaptic
vesicles to the presynaptic membrane and the release of acetylcholine. The overabundance of
acetylcholine released guarantees a depolarization of the postsynaptic membrane and the firing
of an action potential.
13. At the muscle end-plate, acetylcholine (ACh) caused the opening of…
Answer: D. Binding of ACh to receptors in the muscle end plate opens channels that allow
passage of both Na+ and K+ down their chemical/concentration gradient. The resulting membrane
potential will be depolarized to a value that is approximately halfway between their respective
equilibrium potentials.
14. Which of the following is true about the synaptic channels on the endplate of skeletal muscle?
Answer: C. ACh is released from the alpha motoneuron nerve terminal and activates the
synaptic channels (Nm receptors) on the skeletal muscle end plate. These channels, unlike the
channels produced action potential, are not affected by changes in the membrane potential.
Atropine blocks muscarinic (M) receptors, not Nm receptors. These channels are equally
permeable to Na+ and K+.
15. The end-plate of a normally innervated skeletal muscle cell can be distinguished from the rest of
the cell membrane in that only the end-plate:
Answer: A. The end-plate region of the skeletal muscle cell is the only region with receptors to
acetylcholine. The end-plate potential produced in this region can lead to an action potential and
muscle contraction. All region of the muscle membrane will be depolarized by increases in
extracellular K+ and least if not none; region will be dramatically affected by Ca2+.
Answer: C. The motor endplate potential is produced in the muscle. Therefore you require ionic
movement through channels that are found on the muscle membrane. The motor endplate
potential is also caused by Na+ entry into the muscle. The release of acetylcholine from the
motorneuron leads to its binding to nicotinic receptors found at the motor endplate. This leads to
opening of the associated ion channel that allows for the simultaneous movement of Na+ into the
cell and K+ out. More Na+ moves in than K+ out so you get depolarization of the muscle cell
membrane. This graded potential is the motor endplate potential.
18. Mary has just found out that she is suffering from myasthenia gravis, an autoimmune disease that
decreases the number of nicotinic receptors on the muscle membrane of the neuromuscular
junction. She has been told to take a cholinesterase inhibitor which increases the concentration of
acetylcholine at the neuromuscular junction. The binding of acetylcholine to the nicotinic
receptors at the neuromuscular junction stimulate the influx of what ion into the muscle cell?
Answer: B. Both Na+ and K+ can go through NM. But, K+ will go out (efflux), and the influx of
Na+ more than the efflux of K+.
19. A 30-year-old woman is running the Boston marathon. In regard to the physiology of her
different muscle tissue types, an increase in sodium conductance is associated with which of the
following?
(A) The plateau phase of the ventricular muscle action potential in heart
(B) The downstroke of the skeletal muscle action potential
(C) The upstroke of the smooth muscle action potential
(D) The refractory period of the nerve cell action potential
(E) The end-plate potential of the skeletal muscle fiber
Answer: E. The end-plate potential in skeletal muscle is produced by an influx of sodium into
the cell, which results from the increase in sodium permeability that occurs with acetylcholine
binding to the nicotinic receptors on the membrane of the motor end plate. Acetylcholine binding
at the motor end plate also increases the potassium conductance of the membrane. The plateau
phase of ventricular muscle action potentials and the upstroke of smooth muscle action potentials
are produced by an increase in calcium conductance. An increase in potassium conductance is
responsible for the downstroke of the action potential. The refractory period is caused by an
increase in potassium conductance and a decrease in the number of sodium channels available to
produce an action potential (i.e., sodium channel inactivation).
20. Which of the following temporal sequences is correct for excitation-contraction coupling in
skeletal muscle?
(A) Increased intracellular [Ca2+]; action potential in the muscle membrane; cross-bridge
formation
(B) Action potential in the muscle membrane; depolarization of the T tubules; release of Ca2+
from the sarcoplasmic reticulum (SR)
(C) Action potential in the muscle membrane; splitting of adenosine triphosphate (ATP); binding
of Ca2+ to troponin C
(D) Release of Ca2+ from the sarcoplasmic reticulum (SR); depolarization of the T tubules;
binding of Ca2+ to troponin C
Answer: B. The correct sequence is action potential in the muscle membrane; depolarization of
the T tubules; release of Ca2+ from the sarcoplasmic reticulum; binding of Ca2+ to troponin C;
cross-bridge formation; and splitting of adenosine triphosphate.
21. Which of the following statements about smooth muscle contraction is most accurate?
Answer: B. In contrast to skeletal muscle, smooth muscle can be stimulated to contract without
the generation of an action potential. For example, smooth muscle contracts in response to any
stimulus that increases the cytosolic Ca2+ concentration. This includes Ca2+ channel openers,
subthreshold depolarization, and a variety of tissue factors and circulating hormones that
stimulate the release of intracellular Ca2+ stores. Smooth muscle contraction uses less energy and
lasts longer compared to that of skeletal muscle. Smooth muscle contraction is heavily Ca2+
dependent.
Muscle Contraction
Answer: A. In both isometric and an isotonic contraction the muscle is attempting to pull a load.
Muscle shortening does not occur during isometric contraction. Chemical reactions could be
something totally unrelated to “contraction.” Production of tension will occur with the
application of preload (not contraction, or active force).
Answer: G. The action potential and the absolute refractory period are extremely short and are
over for a significant time interval before mechanical contraction begins.
24. Check each of the following statements about skeletal muscle contraction that is true.
(A) The major function of the T system (transverse tubules) is to store and release Ca2+
(B) The intracellular release of Ca2+ causes the formation of bonds between actin and myosin
(C) The bonds between actin and myosin are maintained until the Ca2+ is sequestered
(D) All of the above
(E) B and C
(F) None of the above
Answer: B. The sarcoplasmic reticulum is the major intracellular storage and release site for
calcium. The free calcium then attaches to troponin, causing the movement of tropomyosin and
exposing the cross-bridge attachment sites on the actin. Thus, statement B is correct. However,
the bonds are not maintained; rather, there is cycling of the crossbridges. Cycling means the
bonds form then break and continue this cycling during contraction. Every time a single cross-
bridge goes through one cycle, 1 ATP is hydrolyzed.
25. Which of the following best describes the contractile response of skeletal muscle?
Answer: C. The duration of the contractile response of skeletal muscle exceeds the duration of
the action potential, and the contraction starts around the same time the action potential starts.
Because the muscle contractile mechanism does not have a refractory period, repeated
stimulation before relaxation causes greater tension development than during a single muscle
twitch (summation, or temporal summation). Isometrical tension is more than isotonical tension.
(during an isotonical contraction, the force is constant, and it doesn't reach/exceed the peak of
isometrical contraction force/tension.)
(A) The total tension in the muscle is generated from actin-myosin cross-bridge
(B) Intracellular free Ca2+ is lower than under resting conditions
(C) ATPase activity of the sarcoplasmic reticulum is inhibited
(D) Troponin-bound Ca2+ is required to maintain active tension
(E) The Na+/K+-ATPase pump is actively inhibited
Answer: D. Ca2+ must remain bound to the troponin to maintain cross-bridge cycling. If the
Ca2+ detached from troponin (because of lower intracellular [Ca2+] or removal by Ca2+-ATPase to
SR), the troponin will cover the attachment site on the actin and cycling will be terminated.
During an isometric contraction cross-bridges will generate active tension/force. The total
tension will be the sum of the active (cross-bridge) and passive (preload) tension. The Na+/K+-
ATPase pump is not inhibited or at least it is not “actively.”
27. In a series of experiments, it is noted that in a skeletal muscle fiber an intracellular concentration
of Ca2+ of 10–6.5 mol/L is the threshold value needed for inducing contraction. On this basis, one
would expect a concentration of 10–5.5 mol/L of Ca2+ to cause:
Answer: A. Under resting condition, the myosin cross-bridges are not linked to the actin of the
thin filament. This permits the sliding of the thin and thick filaments past one another (easy to
stretch or good compliance). During cross-bridge cycling (contraction), ATP is not required to
form the cross-link between actin and myosin. Rather, the attachment of ATP to bind to the cross-
bridge head (myosin light chain) is required to break the cross-link. Inability of ATP attachment
(or resetting myosin head position) terminate cycling with the actin and myosin cross-link. (i.e.
rigor motis) The cycling of Ca2+ independent from myosin cross-bridge cycling, (but Ca2+-
ATPase). ADP can be found on myosin, but it is ATP bound to myosin and it get hydrolyzed.
Since cross-bridge cycling terminated, there would be 100% reduction of active tension.
29. Which one of the following groups matches the following statement? This group of muscles
requires calcium to bind to troponin C to initiate the contractile state.
(A) Skeletal muscle only (D) Cardiac and smooth muscle only
(B) Skeletal and cardiac muscle only (E) Smooth muscle only
(C) Cardiac muscle only
30. Which one of the following proteins is important for skeletal muscle contraction but not for
smooth muscle contraction?
31. You are comparing the structure of skeletal and smooth muscle. Which one of the following is
only associated with skeletal muscle?
Answer: D. Troponin (Tn) is found in skeletal muscle and is a complex made up of three
subunits; Tn T bound to the tropomyosin protein, Tn I that is believed to inhibit the active site
and Tn C that binds to calcium. Depolarization of the muscle membrane leads to an elevation in
intracellular calcium levels increasing the number of Tn C bound to calcium, which in turn
increases the number of active sites on the thin filament available for binding to the myosin
heads of the thick filament. Troponin is not found in smooth muscle, a similar molecular
calponin has been reported, but it can be stated that skeletal muscle has troponin while smooth
muscle does not.
32. In order to initiate the processes involved in smooth muscle contraction calcium must bind to
which one of the following proteins?
Answer: D. On the elevation of calcium levels to initiate contraction the calcium binds to
calmodulin. Calmodulin is a protein found in the muscle cytoplasm associate with a MLCK
enzyme and when bound to 4 calcium ions it is activated. When activated this MLCK
phosphorylates the regulatory light chains on the myosin head allowing crossbridge binding and
hence contraction.
33. Calmodulin is most closely related, both structurally and functionally, to which of the following
proteins?
Answer: D. In smooth muscle, the binding of four Ca2+ ions to the protein calmodulin permits
the interaction of the Ca2+-calmodulin complex with myosin light chain kinase. This interaction
activates myosin light chain kinase, resulting in the phosphorylation of the myosin light chains
and, ultimately, muscle contraction. In skeletal muscle, the activating Ca2+ signal is received by
the protein troponin C. Like calmodulin, each molecule of troponin C can bind with up to four
Ca2+ ions. Binding results in a conformational change in the troponin C protein that dislodges the
tropomyosin molecule and exposes the active sites on the actin filament.
34. Excitation-contraction coupling in skeletal muscle involves all of the following events EXCEPT
one. Which one is this EXCEPTION?
Answer: D. Tropomyosin is an important regulator of the interaction of actin with the myosin
crossbridge. Troponin I is bound to actin and holds the troponin-tropomyosin in a position that
prevents the myosin crossbridge access to the binding site on the actin molecule.
(A) Decreased voltage sensitivity of the dihydropyridine receptor (L-type Ca2+ channel)
(B) Enhanced activity of the sarcoplasmic reticulum Ca2+ -ATPase
(C) Prolonged opening of the ryanodine receptor channel
(D) Reduction in the density of voltage-sensitive Na+ channels in the T tubule membrane
Answer: C. As long as the ryanodine receptor channel on the sarcoplasmic reticulum remains
open, Ca2+ will continue to flood the sarcoplasm and stimulate contraction. This prolonged
contraction results in heat production, muscle rigidity, and lactic acidosis. In contrast, factors that
either inhibit Ca2+ release or stimulate Ca2+ uptake into the sarcoplasmic reticulum, or that
prevent either the depolarization of the T tubule membrane or the transduction of the
depolarization into Ca2+ release, would favor muscle relaxation.
38. The rate at which Ca2+ is sequestered by the sarcoplasmic reticulum of skeletal muscle during a
twitch is directly related to:
(A) The rate of tension development (D) The height of the action potential
(B) The rate of ATP hydrolysis by myosin (E) All of the above
(C) The rate of relaxation (F) None of the above
Answer: C. Sequestration means the movement of Ca2+ back into the sarcoplasmic reticulum.
This is an energy-dependent process that terminates contraction.
39. A single contraction of skeletal muscle is most likely to be terminated by which of the following
actions?
Answer: D. Skeletal muscle contraction is tightly regulated by the concentration of Ca2+ in the
sarcoplasm. As long as sarcoplasmic Ca2+ is sufficiently high, none of the remaining events-
removal of acetylcholine from the neuromuscular junction, removal of Ca2+ from the presynaptic
terminal, closure of the acetylcholine receptor channel, and return of the dihydropyridine
receptor to its resting conformation-would have any effect on the contractile state of the muscle.
Answer: B. Smooth muscle contraction is regulated by both Ca2+ and myosin light chain
phosphorylation. When the cytosolic Ca2+ concentration decreases following the initiation of
contraction, myosin kinase becomes inactivated. However, cross-bridge formation continues,
even in the absence of Ca2+, until the myosin light chains are dephosphorylated through the
action of myosin light chain phosphatase.
41. You are charged with the responsibility of developing a new drug to treat muscle spasticity
following spinal cord injury. Which of the following characteristics would be most useful in
treating this condition?
42. When comparing the contractile responses in smooth and skeletal muscle, which of the following
is most different?
(A) The source of activator Ca2+ (D) The source of energy used during
(B) The role of Ca2+ in initiating contraction contraction
(C) The mechanism of force generation (E) The nature of the contractile proteins
Answer: B. In smooth muscle, Ca2+ binds to and activates calmodulin, which activates MLCK
which phosphorylates myosin light chain, and then a cross-bridge can happen. In skeletal muscle,
Ca2+ binds to troponin, which causes the shift of tropomyosin from the attachment site of myosin,
and then a cross-bridge can happen. Choice C, D, and E are same in both muscles, and choice A
varies in smooth muscles depends on how much SR is well developed.
43. Which of the following best represents the muscle type(s) that require Ca2+-induced Ca2+ release
in order to initiate contraction?
Answer: E. Both cardiac and smooth muscle require Ca2+-induced Ca2+ release in order to
initiate a contraction. Intracellular Ca2+ levels must be elevated in order to bind TnC or
calmodulin in cardiac and smooth muscle respectively. The binding of Ca2+ to these two proteins
initiates the contraction process using two completely different mechanisms. Depolarization of
the muscle membrane leads to Ca2+ entering the muscle cell. This Ca2+ binds to the ryanadine
receptor on the SR causing it to open and allow Ca2+ to rush out of the SR into the intracellular
fluid increasing concentration dramatically. This elevation in Ca2+ levels means greater number
of proteins (TnC and calmodulin) are bound leading to more crossbridge interactions and hence
the production of contractile force.
44. Similarities between smooth and cardiac muscle include which of the following?
Answer: B. The strongest common denominator among smooth, skeletal, and cardiac muscle
contraction is their shared dependence on Ca2+ for the initiation of contraction. Cardiac and
skeletal muscles exhibit several characteristics not shared by smooth muscle. For example, the
contractile proteins in both cardiac and skeletal muscles are organized into discrete sarcomeres.
Both muscle types also possess some semblance of a T tubule system and are dependent on the
generation of action potentials for their contraction. Smooth muscle, in contrast, is relatively less
organized, is uniquely regulated by myosin light chain phosphorylation, and can contract in vivo
in the absence of action potentials.
45. The delayed onset and prolonged duration of smooth muscle contraction, as well as the greater
force generated by smooth muscle compared with skeletal muscle, are all consequences of which
of the following?
Answer: D. The slower cycling rate of the cross-bridges in smooth muscle means that a higher
percentage of possible cross-bridges is active at any point in time. The more active cross-bridges
there are, the greater the force that is generated. Although the relatively slow cycling rate means
that it takes longer for the myosin head to attach to the actin filament, it also means that the
myosin head remains attached longer, prolonging muscle contraction. Because of the slow cross-
bridge cycling rate, smooth muscle actually requires less energy to maintain a contraction
compared with skeletal muscle.
46. Which of the following best describes an attribute of visceral smooth muscle not shared by
skeletal muscle?
47. Smooth muscle that exhibits rhythmical contraction in the absence of external stimuli also
necessarily exhibits which of the following?
Answer: B. For a muscle to contract spontaneously and rhythmically, there must be an intrinsic
rhythmical “pacemaker.” Intestinal smooth muscle, for example, exhibits a rhythmical slow-
wave potential that transiently depolarizes and repolarizes the muscle membrane. This slow wave
does not stimulate contraction itself, but if the amplitude is sufficient, it can trigger one or more
action potentials that result in Ca2+ influx and contraction. Although they are typical of smooth
muscle, neither “slow” voltage-sensitive Ca2+ channels nor action potentials with “plateaus” play
a necessary role in rhythmical contraction. A high resting cytosolic Ca2+ concentration would
support a sustained contraction, and hyperpolarization would favor relaxation.
48. The sensitivity of the smooth muscle contractile apparatus to calcium is known to increase in the
steady-state under normal conditions. This increase in calcium sensitivity can be attributed to a
decrease in the levels of which of the following substances?
Answer: E. Smooth muscle is unique in its ability to generate various degrees of tension at a
constant concentration of intracellular calcium. This change in calcium sensitivity of smooth
muscle can be attributed to differences in the activity of MLCP. Smooth muscle contracts when
the myosin light chain is phosphorylated by the actions of myosin light chain kinase (MLCK).
MLCP is a phosphatase that can dephosphorylate the myosin light chain, rendering it inactive
and therefore attenuating the muscle contraction. Choice A: Both actin and myosin are important
components of the smooth muscle contractile apparatus much like that of skeletal muscle and
cardiac muscle, but these do not play a role in calcium sensitivity. Choice B: ATP is required for
smooth muscle contraction. Decreased ATP levels would be expected to decrease the ability of
smooth muscle to contract even in the face of high calcium levels. Choice C: The calcium-
calmodulin complex binds with MLCK, which leads to phosphorylation of the myosin light
chain. A decrease in the calcium-calmodulin complex should attenuate the contraction of smooth
muscle. Choice D: Again, the binding of calcium ions to calmodulin is an initial step in the
activation of the smooth muscle contractile apparatus.
49. A 32-year-old man is diagnosed with primary hypertension. His physician recommends a drug
for hypertension that acts by decreasing vascular smooth muscle contractile activity without
affecting ventricular contractility. Which of the following is the most likely site of action for the
drug?
Answer: B. Smooth muscle contraction is regulated by a series of reactions that begins with the
binding of calcium to calmodulin, in contrast to cardiac (and skeletal) muscle, where contraction
is triggered by the binding of Ca2+ to troponin C, which by altering the position of tropomyosin
on the thin filament, allows cross-bridge cycling to begin. The calcium-calmodulin complex in
smooth muscle binds to and activates a protein kinase called myosin light chain kinase (MLCK),
which catalyzes the phosphorylation of the myosin light chains (LC20). Once these light chains
are phosphorylated, myosin and actin interaction can occur and vascular smooth muscle shortens
and develops tension. Although β-adrenergic receptor agonists (which will increase PKA) may
lower blood pressure by relaxing vascular smooth muscle, they also increase the rate and
strength of the heart beat.
50. An experimental drug is being tested as a potential therapeutic treatment for asthma. Preclinical
studies have shown that this drug induces the relaxation of cultured porcine tracheal smooth
muscle cells pre-contracted with acetylcholine. Which of the following mechanisms of action is
most likely to induce this effect?
Answer: E. The stimulation of either adenylate or guanylate cyclase induces smooth muscle
relaxation. The cyclic nucleotides produced by these enzymes stimulate cAMP- and cGMP-
dependent kinases, respectively. These kinases phosphorylate, among other things, enzymes that
remove Ca2+ from the cytosol, and in doing so they inhibit contraction. In contrast, either a
decrease in K+ permeability or an increase in Na+ permeability results in membrane
depolarization and contraction. Likewise, inhibition of the sarcoplasmic reticulum Ca2+-ATPase,
one of the enzymes activated by cyclic nucleotide-dependent kinases, would also favor muscle
contraction. Smooth muscle does not express troponin.
51. In smooth muscle, Ca2+ is release from the sarcoplasmic reticulum (SR) by which of the
following?
Preload/Afterload
Answer: E. When the afterload on an isotonically contracting skeletal muscle is increased, the
velocity of shortening slows, the amount of force produced by the muscle increases, the interval
between excitation and shortening increases, and the amount of shortening decreases.
53. All of the following will occur when an unstimulated muscle is stretched except...
Answer: B. Stretch = increase muscle length, and this cause increased preload ( = passive
tension).
54. Which of the following statements is true?
(A) A muscle at resting length exerts its maximum force during an isotonic contraction
(B) The maximum velocity of shortening during contraction occurs when there is no afterload
(C) The preload is the weight the muscle moves before it starts to relax
(D) In most form of muscle contraction in an intact individual, the preload and afterload are equal
(E) All of the above
(F) A and B
(G) C and D
(H) B and D
(I) None of the above
Answer: B. Afterload decreases the velocity of shortening. When there is no load, velocity will
be maximal. During isotonic contraction, force is determined by afterload. The greatest force is
developed by a maximal stimulation during an isometric contraction. In an intact individual the
preload is constant in most cases (muscles are nearly at their ideal length), while the afterload
varies (represents the load the muscle is attempting to lift.)
55. Alteration in preload alters the force of contractions in which of the following muscle type of
types?
Answer: E. All muscle types are able to influence the force of contraction by varying the initial
length (≈ preload) of their sarcomeres.
56. The diagram shows the force-velocity relationship for isotonic contractions of skeletal muscle.
The differences in the three curves result from differences in which of the following?
57. Illustrates differences in the force-velocity relationship of skeletal muscle caused by changes in
myosin ATPase activity.
Answer: B. These two graphs show the force-velocity relationship for isotonic contractions. The
starting point for each curve on the У axis represents the maximum velocity of contraction, i.e.,
the velocity with no load. This parameter is determined by the muscle’s ATPase activity. In
figure A all three curves start at the same point on the У axis, therefore they all have the same
ATPase activity. In figure B the three curves start at different points on the У axis, thus they all
have different ATPase activities. Muscle V1 has the greatest ATPase activity, therefore it is the
fastest muscle, and V3 has the least ATPase activity (slowest muscle).
58. In the diagram below, the shift from curve X to curve Y could be produced by:
Answer: C. A shift from curve X to curve Y produces a higher intersection point on the У axis.
This means a greater ATPase activity and a faster muscle, i.e., a greater velocity of shortening.
Since the point on the χ axis is the same, the two muscles can generate the same maximum force
during contraction, i.e., they have the same muscle mass.
59. The following diagram shows the chart records taken from an isolated skeletal muscle
contracting against various loads. Both the length and force produced by the muscle were
measured, the X-axis represents time. An upward deflection indicates shortening on the length
trace. The muscle resting length was kept constant throughout the data recording. In which
diagram does the muscle produce the fastest shortening velocity?
Answer: 4. The chart shows an isotonic
contraction and it can be observed that the
muscle does shorten after lifting the load. In
order to determine the shortening velocity
you need to determine the gradient at the
point where the muscle is shortening at its
fastest, this is at at the beginning of the
shortening phase. In this question it is
difficult to determine this gradient as no
values are given on the x and y axis and it is
hard to look at the three different isotonic
chart records and decide which has the As you can see the light afterload that has to
fastest shortening via this method. The way be generated by the muscle in Chart 4 allows
to look at this question is to think of the for a quite high level of shortening and
force-velocity relationship and compare hence shortening velocity. As this afterload
where the data from these 4 chart records is the lightest of the 4 charts this is the one
sit. The following diagram shows this: that would have the greatest shortening
velocity.
60. The following diagram shows the force velocity relationship obtained from a single skeletal
muscle fibre. All data is taken on the ascending limb of the length tension curve. The numbers
identify the curve to their right. Which one of the following curves is produced when the muscle
is at the shortest length?
Answer: 1. You are told in the question that all data is taken from the ascending limb of the
length-tension relationship. From this information you can assume that an increase in muscle
length will produce an increase in crossbridge cycling when the muscle is contracting. This in
turn would mean that the shorter the muscle length the less crossbridge cycling during the
contraction and therefore the maximum force developed by the muscle would be less. As passive
tension is negligible in skeletal muscle when you are on the ascending limb of the length tension
relationship the load value (X-axis) when shortening velocity is zero is indicative of the
isometric force the muscle can develop at that particular length. Curve No. 1 meets the X-axis at
the lowest value of load, so it represents the data from the muscle at its shortest length. Another
way of looking at this with respect to the amount of crossbridge cycling is to compare the
shortening velocity of the muscle at the same load at different lengths. If there is less
crossbridge cycling at the shortest length then you would expect the muscle not to be able to
shorten as much once it had lifted its load (there would be less crossbridge cycling "left over"
after the afterload had been produced), therefore the length of shortening (and shortening
velocity) would be less at shorter lengths at the same load. Again you can observe that Curve No.
1 does have the least shortening velocity at all loads when compared to the other curves, hence it
represents the data of the muscle at its shortest length.
61. Use the force-velocity diagrams, from the same muscle, below to answer the following question.
Which one of the following statements must be true when comparing Point 1 to Point 2?
Answer: C. If you look at the graph you can see that Point 1 sits further to the right of the Y-axis
than Point 2. Point 1 is therefore lifting a greater load.
62. Using the two force-velocity curves, taken at muscle lengths on the ascending limb of the length-
tension relationship, shown in the graph below which one of the following statements is true
under all circumstances?
Answer: D. Both curves have the same Vmax, thus they are the same muscle. Curve A is above
Curve B, thus it produces more force. Point B has more load than Point A, thus the velocity is
slower. There is no enough information to tell if they are fast-twitch or slow-twitch muscles.
63. Illustrates differences in the force-velocity relationship of skeletal muscle caused by changes in
recruitment of additional motor units.
Answer: A. The point where each curve crosses the χ axis is the maximum force the muscle can
generate during contraction. This is determined by the muscle mass or the number of motor units
activated during contraction. In figure A the maximum force that can be generated increases
from F1 through F3, thus activated muscle mass also increases. In figure B all three curves end at
the same point on the χ axis, thus all three muscles have the same muscle mass. Also, with each
curve the maximum velocity occurs when there is no load, and as load increases, velocity during
shortening decreases. When the curve crosses the χ axis, there is zero velocity, which means the
muscle is unable to lift the load (isometric contraction).
64. Use the following diagram of the active length tension curve from an in vitro skeletal muscle
preparation to answer the question. Which circle is at a sarcomere length where there is the most
crossbridge attachment occurring during contraction?
Answer: 3. Looking at the diagram you can see that Point 3 is at the plateau of the active length-
tension curve. At this length there is maximum overlap between the thick and thin filaments and
no physical interference caused by the thin filaments on opposite ends of the
sarcomere. Therefore there will be maximum crossbridge attachment during muscle contraction
at this length.
Another way of looking at this is to realize that you will observe maximum force production
when you have the most crossbridge attachment. Point 3 shows the highest force development.
65. During the resting state, a single skeletal muscle sarcomere can exist at a number of lengths.
During an isometric contraction, the length at which it can exert its maximum force in response
to stimulation is:
Answer: B. Maximum force during an isometric contraction is achieved when all cross-bridges
are cycling. This can only be achieved when the system is saturated with calcium and there is the
ideal overlap between actin and myosin. The figure with a sarcomere length of 2.2 µm
demonstrates this ideal overlap. The first figure with a sarcomere length of 1.7 µm shows an
overlap of actin filaments. This would decrease the number of potential cycling cross-bridges
and thus decrease the maximum achievable force during contraction. The bottom figure shows an
overstretched sarcomere that has a decreased overlap between the actin and myosin. This also
will decrease the number of potential cycling cross-bridges. Remember, when the sarcomere is
stretched to the point where there is no overlap between actin and myosin, no cycling between
the actin and myosin is possible. Under these conditions there will be no active tension following
stimulation.
66. The figure below depicts the isometric length-tension relationship of skeletal muscle. Identify the
region where actin and myosin overlap is the least.
Answer: E. This curve demonstrates the relationship between the maximum possible active
tension during an isometric contraction and muscle length. The active tension achieved is
determined by the number of cross-bridges cycling, which in turn is determined by the
relationship between actin and myosin filaments. At point C, which represents the greatest
achievable active tension from this muscle, there is the ideal overlap between the actin and
myosin. This is the resting length of most skeletal muscles in vivo. When muscle length
increases there is less overlap between the actin and myosin, fewer cross-bridges can cycle, and
less active tension will develop. The least overlap is at the greatest muscle length; the far right in
the graph. To the left of point C the decrease in muscle length destroys the relationship between
the actin and myosin; actin filaments overlap and eventually the myosin hits the Z lines.
67. The diagram shows the length-tension relationship for a single sarcomere. Why is the tension
development maximal between points B and C?
68. Use the figure below for this question: A change in resting skeletal muscle length from “c” to “e”
results in:
Answer: A. This is skeletal muscle, not cardiac, won’t change Ca2+ sensitivity by preload, and its
contraction is not depend on extracellular Ca2+ entry. Choice C occurs between “E” and “D”.
Choice D occurs from “e” to “c”.
The diagram illustrates the isometric length-tension relationship in a representative intact skeletal
muscle. When answering the following three questions, use the letters in the diagram to identify
each of the following.
Answer: E. “Active” tension is maximal at normal physiological muscle lengths. At this point,
there is optimal overlap between actin and myosin filaments to support maximal cross-bridge
formation and tension development.
Answer: B. This length-tension graph depicts the three basic curves discussed in class. The
curve that starts at point 6 and goes through point 1 is the passive or preload curve. The active
tension curve starts at point 7, reaches a peak at point 9, and then declines and crosses the χ axis
as the dashed line. The line between points 9 and 2 represents the total tension developed by
adding the passive and active tensions together. The point that represents a preload of 40 g is on
the passive curve at point 4. If this point is taken across to the У axis, it represents a tension of
40 g.
73. Maximal active tension in the diagram is developed by skeletal muscle at point(s):
Answer: E. Active tension curve starts from point 7 to point 9. The solid curve from point 9 to 2
is total tension curve. The dashed curve from point 9 to 3 is the descending limb of the active
tension curve. Point 1 shows the highest tension in the choices, yet it is not active tension (likely,
passive tension).
74. Which point(s) in the diagram represent(s) no overlap between most of the muscle’s thick and
thin filaments? Point(s):
Answer: A. No overlap between actin and myosin means no active tension upon stimulation.
This is represented by the point (muscle length) where the active tension curve crosses the χ axis.
This point is not labeled, but the same length is represented by the point on the preload curve
directly above; point 2. If a muscle is at point 2 on the preload curve (or beyond it, like point 1),
no active tension will be developed when the muscle is stimulated. Point 2 or 1 is a better answer
than point 7 because there the loss of active tension was produced by destroying the geometric
relationship between the actin and myosin.
75. If a muscle length was at point 4 on the passive curve, what is the active tension generated
during stimulation?
Answer: B. If a relaxed muscle at point 4 on the passive curve is stimulated maximally, it will
generate active tension, depicted by the point on the dashed curve directly above. This point on
the У axis would represent a tension of approximately 50 g. The answer is not point l0; this
represents the total tension in the muscle during stimulation (passive plus active)
76. The length-tension diagram shown here was obtained from a skeletal muscle with equal numbers
of red and white fibers. Supramaximal tetanic stimuli were used to initiate an isometric
contraction at each muscle length studied. The resting length was 20 cm. What is the maximum
amount of active tension that the muscle is capable of generating at a preload of 100 grams?
Answer: C. The diagram shows the relationship between preload or passive tension (curve Z),
total tension (curve X), and active tension (curve Y). Active tension cannot be measured directly:
it is the difference between total tension and passive tension. To answer this question, the student
must first find where 100 grams intersects the preload curve (passive tension curve) and then
move down to the active tension curve, One can see that a preload of 100 grams is associated
with a total tension of a little more than 150 grams, and an active tension of a little more than 50
grams. Note that active tension equals total tension minus passive tension, as discussed above.
Drawing these three curves in a manner that is mathematically correct is not an easy task. The
student should thus recognize that active tension may not equal total tension minus passive
tension at all points on the diagram shown here as well as on USMLE diagrams.
77. Use the following diagram of the length tension curve from an in vitro skeletal muscle
preparation to answer the question. The dark blue line represents active tension, the green line
passive tension. Which circle is at a sarcomere length where there is the greatest total tension
produced during a contraction?
Answer: 5. The total tension produced during a contraction is equal to the passive + active
tension. Point 5 has the lowest active tension but an extremely high passive tension. It can be
observed that stretching the muscle past the optimal length has a dramatic effect on passive
tension with it rising at a much greater rate than the decline in active tension due to decreased
filament overlap. This means that the total tension increases with sarcomere length on the above
diagram somewhere between Points 3 and 4 and continues to do so until you physically damage
the muscle. Therefore Point 5 has the highest total tension.
78. A severe laceration to a wrist completely severed a major muscle tendon. To reattach the tendon,
the severed ends were overlapped by 7.5 cm before suturing. After recovery, which of the
following could be expected compared with the preinjured muscle?
Answer: D. Stretching the muscle to facilitate reattachment of the tendons leads to an increase in
passive tension or preload. This increase in passive tension increases the muscle length beyond
its ideal length, which in turn leads to a decrease in the maximal active tension that can be
generated by the muscle. The reason that maximal active tension decreases is that interdigitation
of actin and myosin filaments decreases when the muscle is stretched; the interdigitation of a
muscle is normally optimal at its resting length.
80. The following diagram shows the chart records taken from an isolated skeletal muscle
contracting against various loads. Both the length and force produced by the muscle were
measured, the X-axis represents time. An upward deflection indicates shortening on the length
trace. The muscle resting length was kept constant throughout the data recording. Which one of
the chart recordings show the muscle undergoing isometric contractions?
Answer: 1. An isometric contraction is one in which there is development of force without any
shortening occurring. As can be seen in the chart record above the length of the muscle stays
constant throughout the whole process, no shortening has taken place. The force record shows
that during this time two muscle contractions have taken place with the associated force
production being recorded with no associated contraction. This therefore is the ISOMETRIC
contraction.
81. If the gastrocnemius muscle is removed from the body, it will achieve a length...
Answer: C. Relaxed skeletal muscle in vivo is stretched close to the ideal passive length. Thus, if
the muscle is removed from the body, preload will be eliminated and muscle will shorten.
82. In an isometric contraction of a skeletal muscle, force of contraction cannot be altered by...
Answer: D. By altering resting length, overlap between the actin and myosin will change, and
this will affect the number of cross-bridge that can cycle during stimulation. Increasing
stimulation frequency will cause increase the Ca2+ released from the SR and this will increase the
number of cross-bridge cycling (temporal summation). Increasing the number of sarcomeres in
parallel is similar to activating additional motor units (spatial summation). Adding sarcomeres in
series does not increase the strength of contraction. i.e. longer rope is not a stronger rope, thicker
rope is.
83. Weightlifting can result in a dramatic increase in skeletal muscle mass, This increase in muscle
mass is primarily attributable to which of the following?
84. A 17-year-old soccer player suffered a fracture to the left tibia. After her lower leg has been in a
cast for 8 weeks, she is surprised to find that the left gastrocnemius muscle is significantly
smaller in circumference than it was before the fracture. What is the most likely explanation?
(A) Decrease in the number of individual muscle fibers in the left gastrocnemius
(B) Decrease in blood flow to the muscle caused by constriction from the cast
(C) Temporary reduction in actin and myosin protein synthesis
(D) Increase in glycolytic activity in the affected muscle
(E) Progressive denervation
Answer: C. Skeletal muscle continuously remodels in response to its level of use. When a
muscle is inactive for an extended period, the rate of synthesis of the contractile proteins in
individual muscle fibers decreases, resulting in an overall reduction in muscle mass. This
reversible reduction in muscle mass is called atrophy.
85. Which of the following characteristics of skeletal muscle make tetanic contraction possible?
(A) The motor neurons to skeletal muscle have a short refractory period and are therefore capable
of delivering a high frequency of stimuli to a muscle fiber
(B) The cell membrane of the skeletal muscle fiber recovers its excitability well before the cell
ceases its contraction
(C) The prolonged exposure of the muscle end plate to high concentrations of acetylcholine
throughout the tetanus
(D) The action potential of skeletal muse outlasts the period of contraction
(E) All of the above
(F) A and B
(G) A, B and C
(H) None of the above
Answer: F. Tetanus in skeletal muscle is possible because multiple action potentials can be
delivered before and during the mechanical event (contraction). Multiple action potentials will
saturate the troponin with Ca2+, resulting in continuous cycling of all available cross-bridges.
This is possible only because of the very short refractory period of the neuronal and skeletal
muscle action potentials. During tetanus, the muscle end plate is not exposed to ACh
“throughout”.
86. The amount of force produced by a skeletal muscle can be increased by which of the following?
87. The force produced by a single skeletal muscle fiber can be increased by which of the following?
Answer: C. Increasing the sarcoplasmic Ca2+ concentration can increase force generation in a
single muscle fiber. This can be accomplished by increasing the frequency of stimulation of the
fiber. Neither increasing the amplitude of the depolarization at the postsynaptic membrane of the
neuromuscular junction nor increasing the number of voltage-gated Na+ channels is likely to
affect the release of Ca2+ from the sarcoplasmic reticulum. In contrast, both a decrease in the
extracellular K+ concentration and an increase in the permeability of the muscle membrane to K+
would decrease excitability of the muscle cell.
88. Repetitive stimulation of a skeletal muscle fiber will cause an increase in contractile strength due
to an increase in which of the following?
(A) The myosin ATPase activity is greater in skeletal muscle when compared to cardiac muscle
(B) Ca2+-induced Ca2+-release does not allow for tetanization to take place in cardiac muscle
(C) The length tension relationship for cardiac muscle is shorter than that of skeletal muscle
(D) The duration of muscle contraction is longer in skeletal muscle
(E) The ratio of action potential duration to twitch duration is much less in skeletal muscle
Answer: E. This statement is true, the timecourse of a skeletal muscle action potential is a few
msec at most whereas the shortest contraction time is at least 100msec. In cardiac muscle the
action potential is approximately of the same duration as the contraction. In order to produce
tetany you need to stimulate the muscle at a high enough frequency to keep the series elastic
component continuously stretched as well as to increase intracellular Ca2+ levels to increase the
available active sites on the thin filament producing a contraction of greater force. In cardiac
muscle the duration of the action potential leads to the absolute refractory period spanning the
timecourse of the contraction making it impossible to produce a continuous tetanic contraction.
When you think about the function of these two muscle types it is not surprising that you can
only produce tetanic contractions in skeletal muscle. Skeletal muscle is there to provide support
to the skeletal system, therefore long sustained contractions are required for the maintenance of
posture and for the regulation of movement in a smooth manner. You can imagine what walking
would look like if you could only produce single twitches. Cardiac muscle on the other hand
needs to contract then relax in a regular fashion. To allow for blood to enter the heart (relaxed)
and then be pumped out (contract) ... if we had a sustained contraction of the muscle of the heart
then blood would be squeezed out into the aorta but none would be able to return to the ventricle
and your cardiac output would decrease to nothing. Not a good situation to be in.
90. Tetanic contraction of a skeletal muscle fiber results from a cumulative increase in the
intracellular concentration of which of the following?
92. During a demonstration for medical students, a neurologist uses magnetic cortical stimulation to
trigger firing of the ulnar nerve in a volunteer. At relatively low-amplitude stimulation, action
potentials are recorded only from muscle fibers in the index finger. As the amplitude of the
stimulation is increased, action potentials are recorded from muscle fibers in both the index
finger and the biceps muscle. What is the fundamental principle underlying this amplitude-
dependent response?
(A) Large motor neurons that innervate large motor units require a larger depolarizing stimulus
(B) Recruitment of multiple motor units requires a larger depolarizing stimulus
(C) The biceps muscle is innervated by more motor neurons
(D) The motor units in the biceps are smaller than those in the muscles of the fingers
(E) The muscles in the fingers are innervated only by the ulnar nerve
Answer: A. Muscle fibers involved in fine motor control are generally innervated by small
motor neurons with relatively small motor units, including those that innervate single fibers.
These neurons fire in response to a smaller depolarizing stimulus compared with motor neurons
with larger motor units. As a result, during weak contractions, increases in muscle contraction
can occur in small steps, allowing for fine motor control. This concept is called the size principle.
Muscle Fiber Types
The diagram illustrates the single isometric twitch characteristics of two skeletal muscles, A and
B, in response to a depolarizing stimulus. Refer to it when answering the next two questions.
93. Which of the following best describes muscle B, when compared to muscle A?
(A) Adapted for rapid contraction (D) Innervated by smaller nerve fibers
(B) Composed of larger muscle fibers (E) Less extensive blood supply
(C) Fewer mitochondria
94. The delay between the termination of the transient depolarization of the muscle membrane and
the onset of muscle contraction observed in both muscles A and B reflects the time necessary for
which of the following events to occur?
95. The slow twitch muscle fiber differs from the fast twitch fiber because the slow twitch fiber...
(A) Has a smaller number of muscle fibers in each motor unit but equally powerful
(B) Has a higher concentration of myoglobin and mitochondria
(C) Has a higher ATPase activity
(D) In a large limb serves as a reserve which can be recruited if there is a forceful contraction
(E) Is more readily fatigued
(F) Is part of a motor unit that consists mainly of red fibers
Answer: B. A slow twitch is associated with a red endurance muscle. It does have a smaller
number of muscle fibers but it is generally not as powerful as a white muscle (fast twitch). It has
greater myoglobin (makes it red) and mitochondria because it works mainly aerobically. It
metabolizes ATP slowly (lower ATPase activity). It is not kept in reserve for very forceful
contraction (large fast muscle motor units are). The slow red muscle is endurance muscle, and
fatigues less than fast white muscle.
96. A 16-year-old adolescent boy on the track team asks his pediatrician if he can take creatine on a
regular basis in order to increase his muscle strength prior to a track meet. Which of the
following most likely explains why he wants to take creatine?
Answer: C. The question asks for the major source of ATP in the first few seconds of a
contraction. Creatine phosphate (PCr) is found within the muscle cell and has a chemical
relationship with ATP. ADP + PCr <-> ATP + Cr This reaction is an equilibrium reaction, so
as the muscle begins contracting and utilizing ATP, the reaction is favored to move to the right,
with ADP being quickly converted into ATP. In fact this reaction is so sensitive to ATP levels
that you do not observe a noticeable change in ATP levels until PCr levels are below 10% of that
seen with the muscle at rest. The conversion of ADP into ATP via this reaction is almost
instantaneous so therefore the rephosphorylation of ATP by PCr is the major source of ATP in the
first few seconds of a contraction.