Professional Documents
Culture Documents
Rights of publications, translations and copying are reserved with P.W.Region Pune
मनोगत
शी दयवच
ु ी तमाय कयणेकाभी ऩण
ु े प्रादे मळक वलबागातीर अमबमांते/ कभाचायी
तवेच प्रत्मष/अप्रत्मष वशबागी वशकाऱमाांचे भी भन:ऩल
ू क
ा अमबनांदन कयतो.
शाददाक ळब
ु ेच्छावश ! ! ! . . .
Table of Contents
GENERAL NOTES .............................................................................................................. 5
2: BUILDING WORK ......................................................................................................... 11
Bd-A : Excavation ...................................................................................................................... 11
The Hilly/ inaccessibleareasin western ghat region for Public Works Region, Pune
areidentifiedas below:
Sr.No. District Hilly/ Inaccessible areas
1 Pune GovernmentResolution,Planning
2 Solapur DepartmentNo.DVK/1089/P-66/Y-19
3 Sangli Dated 23-11-1990 &13-06-2003
4 Satara
5 Kolhapur
The increase in rates as above should be applicable only one at a time e.g. if Central Jail
is situated in Corporation area an increase of only 15% for the jail is to be
considered and not 20% (15% + 5%). Issue rates of Schedule ‗A‘ materials for
above notified area shall be increased by respective percentage.
The above percentage should be applied on the cost of items after deducting the cost of
Specified materials, if issued on Schedule 'A'.
4.1 VAT, LBT &SALES TAX f o r m a t e r i a l s arenot considered in the rate abstract as
market rateincludes VAT, LBT. AND SALES TAX.
4.5 As Royalty charges for bricks and crushed metal (as these are factory product) are
already paid by the quarry owner, same should not be considered in the rate analysis.
4.6 The basic rates of materials are as per the Rates charged by the main producers /
suppliers at their respective points of supply, as on the date of implementation
of D.S.R; which includes all taxes such as excise, CST, BST , LBT, Terminal
TAX, VAT, Educational Tax etc. except for Bitumen and Cement. For cement
4% Sales Tax is considered.
The rates of bulk/packed bitumen, bitumen emulsion adopted for the items of
st
bituminous works are based on the rates prevailing on 1 of May 2014 at ex-
Refinery Mumbai. The rates are inclusive of excise duty of 16% with additional
education cess of 3 % on excise duty and VAT 12.50%. Subsequent increase/
decrease, if any, in these rates shall be accounted for in the rate analysis of the items
while framing the estimate.
5.1 Ratesfor transportation of material by Truck from differentleads have been worked
outaspertablegiven byNational BuildingOrganization.The cost per tripshown
instatement ‗C‘, alsoincludes charges of running empty vehicle for returntrip. For
calculationof transportationchargesrates tabulatedinmaterial masterforfollowingitems
are consideredin theformula.
5.2 For calculationof pay load factor a truck of 7.5 M.T. capacityis considered.
5.3 The rates worked out in the Rate Abstract includesinitial lead of 5 Km. for
allcompleteditems, but excluding M.O.R.T.&H.items.Forsupply items and providing
Earth work in embankment of road materials leadis not consideredin the Rate
Abstract. Actual lead charges are tobe added for thesesupply items while framing
the estimate.
5.4 For working out Rates of itemsforadditional leads more than 5 Kms. the Rate
analysis should bepreparedfor actual leads by deducting initial lead charges of 5
Kms for all completed items. For M.O.R.T. & H., items total lead charges shall have to
be considered in the Rate analysis.
5.5 For leads less than 1.00 Km.the rates worked out forbullock cart, head loads,
whicheveris economical, should be adopted as per statement C-2.
5.6 Lead charges for various materials are given in statement C-1 and these are inclusive of
loading and unloading charges. Hence loading and unloading charges should not be
added separately.
a) Rate of transportation of bulk bitumen from Ex-refinery is Rs. 5.20 per M.T./ km. (for one
way journey) Rate of heating and unloading bulk bitumen is Rs. 120.00/ M.T.
5.7 The Basic rates forall quarrying materials such as Rubble, boulders,aggregates,
sand,murum, selected earthetc.are takenasrates at quarry with lead of 50 mtr. (Head
load leadwhich isnot to bedeductedfrom lead)
5.8For items ofbuildings having ground plus upper floors rate shall be increasedasfollowsfor
thefloor lift.
The maximum percentage for lift charges shall not be more than 7% .
Ground floor is the floor having height 3.80 m above average ground level.
The floor to floor height of 3.80 mtrs. is considered for the purpose of lift
charges. For floor to floor height more than 3.80 mtrs. the percentage increase
for the upper floor shall apply. The increase in rates as above should be on
ground floor basic rates only. No cumulative increase shall be done.
Items to be carried out above terrace such as water proofing treatment on
terrace, water storage tank, parapet wall with coping, Stair-case, lift room with slabs
and water proofing treatment, plastering, painting etc. required for the
completion of building are assumed to be the items of its lower floor.
5.9 Additional lift for various, bridge items shall be as per list given below. Rate shall be
increased by percentage given below. Lift is to be measured with respect to common
datum level which will be specified in tender document/estimate.
b) For Piers, Abutment, Returns, wing walls, pier cap, slab, Box Returns, average bed
level shall be the datum
ii) For every additional 2m.height or depth beyond 4.00 m from Datum - 3.50%
6 General Guidelines
6.1 The contents of D.S.R. Annexure are as follows :-
Statement A-1 - Material Master. (Basic ratesof materials)
Statement A-2 - Labour Master
Statement A-3 - Machinery Master.
6.8 For items of excavation, foundation concrete and masonry etc. for C.D. works,
ratesshall beadopted from corresponding items under respective building sections.
6.9 For scaffolding work required to be erected for carrying out repairing work on
externalfaces of building at various heights (viz. repairsto chajja, external plastering,
paintingetc.). The rate of respective item shall be increased by1% provided the work is
carriedout by erecting scaffolding. For specific cases rate analysis shall be got
approved from concerned Superintending Engineer
6.10 For quantity of concrete more than 50Cu.Mt. mix design from approved laboratory is
necessary.
6.12 All concrete items considered in D.S.R. are inclusive of normal concrete curing system. For
building works costing more than Rs.125 lakhs, separate item for intelligent concrete curing
system shall be added in estimate.
6.13 If materials are to be supplied by Department under Schedule ―A‖ of contract, the rateat
whichthe materials willbe charged to the Agency shall be basedat D.S.R. Rate
orprevailing stockissuerate, whichever ismore. The schedule A rates should not be
less than those mentioned in material master.
6.14 No Concrete Mix from R.M.C. Plants shall be used for concrete works without prior
permission of Superintending Engineer.
6.15 Rates of the items using modern machineries with features mentioned at Annexure of
Modern Machinary are worked out including cost of machineries and features therein . For
any machineries and features mentioned at Annexure of Modern Machinary, separate cost
shall not be added in rate analysis. .Salient features of the modern machineries are as
specified under Annexure-Modern Machinery. (attached in DSR)
7 Testing Of Material
7.2 The job mix design for items like M-20 & above grade of concrete mix design, GSB, asphaltic
concrete, bituminous macadam etc. shall be obtained from the V.Q.C.C. laboratory.
7.3 For Specific tests like span load tests, plate / pile load test etc. which are not included in the
rate analysis of item, the payment /estimates for these tests will be prepared on the basis of
rates approved by M.E.R.I.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
2: BUILDING WORK
Bd-A : Excavation
1i a / 1 Excavation for foundation in earth, soil of all types, Cubic 138.00 138.00
BDA 1 sand, gravel and soft murum, including removing the Meter
excavated material up to a distance of 50 m. beyond
the building area & stacking and spreading as
directed, dewatering, preparing the bed for the
foundation and necessary back filling, ramming,
watering including shoring and strutting etc. complete.
(Lift upto 1.5 m.) By Manual Means
Spec. No.: Bd.A.1 Page No. 259
1i b / 1 Excavation for foundation in earth, soil of all types, Cubic 104.00 45.00
BDA 1 sand, gravel and soft murum, including removing the Meter
excavated material up to a distance of 50 m. beyond
the building area & stacking and spreading as
directed, dewatering, preparing the bed for the
foundation and necessary back filling, ramming,
watering including shoring and strutting etc. complete.
(Lift upto 1.5 m.) By Mechanical Means
Spec. No.: Bd.A.1 Page No. 259
1ii a / 1 Excavation for foundation in earth, soils of all types, Cubic 149.00 149.00
BDA 1. sand,gravel and soft murum, including removing the Meter
excavated material upto a distance of 50 meters
beyond the building area and stacking and spreading
as directed, dewatering, preparing the bed for the
foundation and necessary back filling, ramming,
watering including shoring and strutting etc. complete.
(Lift from 1.5m to 3.0m) By Manual Means
Spec. No.: Bd.A.1 Page No. 259
1ii b / 1 Excavation for foundation in earth, soils of all types, Cubic 117.00 66.00
BDA 1 sand,gravel and soft murum, including removing the Meter
excavated material upto a distance of 50 metres
beyond the building area and stacking and spreading
as directed, dewatering, preparing the bed for the
foundation and necessary back filling, ramming,
watering including shoring and strutting etc. complete.
(Lift from 1.5m to 3.0m) By Mechanical Means
Spec. No.: Bd.A.1 Page No. 259
2ii a / 1 Excavation for foundation in Hard murum including Cubic 169.00 169.00
BDA 2 removing the excavated material upto a distance of 50 Meter
metres beyond the building area and stacking and
spreading as directed, dewatering, preparing the bed
for the foundation and necessary back filling, ramming,
watering including shoring and strutting etc. complete.
(Lift from 1.5 to 3.0m.) By Manual Means
Spec. No.: Bd.A.2 Page No. 259
2ii b / 1 Excavation for foundation in Hard murum including Cubic 131.00 72.00
BDA 2 removing the excavated material upto a distance of 50 Meter
metres beyond the building area and stacking and
spreading as directed, dewatering, preparing the bed
for the foundation and necessary back filling, ramming,
watering including shoring and strutting etc. complete.
(Lift from 1.5 to 3.0m.) By Mechanical Means
Spec. No.: Bd.A.2 Page No. 259
3i a / 1 Excavation for foundation in Hard murum and boulders Cubic 178.00 178.00
BDA 3 including removing the excavated materials up to a Meter
distance 50 metres, beyond the building area and
stacking and spreading as directed dewatering
preparing the bed for the foundation and necessary
back filling, ramming, watering including shoring and
strutting etc. complete. (Lift upto 1.5m.) By Manual
Means
Spec. No.: Bd.A.3 Page No. 259
3i b / 1 Excavation for foundation in Hard murum and boulders Cubic 131.00 66.00
BDA 3 including removing the excavated materials up to a Meter
distance 50 metres, beyond the building area and
stacking and spreading as directed dewatering
preparing the bed for the foundation and necessary
back filling, ramming, watering including shoring and
strutting etc. complete. (Lift upto 1.5m.) By Mechanical
Means
Spec. No.: Bd.A.3 Page No. 259
3ii a / 1 Excavation for foundation in Hard murum and boulders Cubic 183.00 183.00
BDA 3 including removing the excavated materials upto a Meter
distance of 50 metres, beyond the building area and
stacking and spreading as directed dewatering
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
3ii b / 1 Excavation for foundation in Hard murum and boulders Cubic 143.00 77.00
BDA 3 including removing the excavated materials upto a Meter
distance of 50 metres, beyond the building area and
stacking and spreading as directed dewatering
preparing the bed for the foundation and necessary
back filling, ramming, watering including shoring and
strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By
Mechanical Means
Spec. No.: Bd.A.3 Page No. 259
4i a / 1 Excavation for foundation in Soft rock and old cement Cubic 406.00 406.00
BDA 4 and lime masonry foundations including removing the Meter
excavated materials upto a distance of 50 metres
beyond the building area and stacking as directed
including dewatering preparing the bed for the
foundation and necessary back filling with available
earth murum, ramming, watering including shoring and
strutting etc. complete (lift upto 1.5m) By Manual
Means
Spec. No.: Bd.A.4 Page No. 259
4i b / 1 Excavation for foundation in Soft rock and old cement Cubic 280.00 218.00
BDA 4 and lime masonry foundations including removing the Meter
excavated mate-rials upto a distance of 50 metres
beyond the building area and stacking as directed
including dewatering preparing the bed for the
foundation and necessary back filling with available
earth murum, ramming, watering including shoring and
strutting etc. complete (lift upto 1.5m) By Mechanical
Means
Spec. No.: Bd.A.4 Page No. 259
4ii a / 1 Excavation for foundation in Soft rock and old cement Cubic 430.00 430.00
BDA 4 and lime masonry foundations including removing the Meter
excavated materials upto a distance of 50 meters
beyond the building area and stacking as directed,
including dewatering preparing the bed for the
foundation and necessary back filling with available
earth murum, ramming watering including shoring and
strutting etc. complete. (Lift from 1.5m To 3.0 m.) By
Manual Means
Spec. No.: Bd.A.4 Page No. 259
4ii b / 1 Excavation for foundation in Soft rock and old cement Cubic 323.00 223.00
BDA 4 and lime masonry foundations including removing the Meter
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
7/1 Excavation for foundation in Hard rock by chiselling, Cubic 899.00 795.00
BDA 6 wedging, line drilling, etc. including trimming and Meter
levelling the bed, removing the excavated materials
upto a distance of 50 metres beyond the building area
stacking as directed, dewatering and back filling with
available earth/ murum ramming, watering, complete.
(Lift upto 1.5 m).
Spec. No.: Bd.A.6 Page No. 260
8/1 Excavation for foundation in laterite rock (soft or hard,) Cubic 545.00 370.00
BDA 7 including trimming and levelling the bed for the Meter
foundation, removing the excavated materials up to a
distance of 50 metres beyond the building area,
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
9/1 Filling in plinth and floors with approved excavated Cubic 58.00 58.00
BDA 10 materials in 15 cm to 20 cm layers including watering Meter
and compaction complete.
Spec. No.: Bd.A.10 Page No. 262
10 / 1 Filling in plinth and floors with contractors soil sand or Cubic 505.00 74.00
BDA 11 murum in 15 cm to 20cm, layers including watering Meter
and compaction complete.
Spec. No.: Bd.A.11 Page No. 263
11 / 1 Providing dry/ trap/ granite/ quartzite/ gneiss rubble Cubic 950.00 142.00
BDA 12 stone soiling 15 cm to 20 cm thick including hand Meter
packing and compacting complete.
Spec. No.: Bd.A. 12 Page No. 264
12 / 1 Providing and filling in the foundation with sand of ap- Cubic 1254.00 149.00
BDA 13 proved quality including watering, compaction Meter
complete.
Spec. No.: Bd.A.13 Page No. 264
13 / 1 Providing soling using 80 mm size trap metal in 15 cm. Cubic 1057.00 149.00
BDA layer including filling voids with Crushed sand/grit Meter
ramming, watering complete.
Spec. No.: As directed by Engineer in charge.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
2/2 Providing M-20 RCC cast insitu single rim bored pile of Running 716.00 74.00
Bd-B 300 mm dia. each of load capacity as per design and of Meter
specified diameter of pile and bulb as directed, sunk to
the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
3/2 Providing M-20 RCC cast insitu single rim bored pile of Running 1017.00 74.00
Bd-B 380 mm dia. each of load capacity as per design and of Meter
specified diameter of pile and bulb as directed, sunk to
the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
4/2 Providing M-20 RCC cast insitu single rim bored pile of Running 1365.00 74.00
Bd-B 450 mm dia. each of load capacity as per design and of Meter
specified diameter of pile and bulb as directed, sunk to
the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
5/2 Providing M-20 RCC cast insitu single rim bored pile of Running 1912.00 74.00
Bd-B 535 mm dia. each of load capacity as per design and of Meter
specified diameter of pile and bulb as directed, sunk to
the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
6/2 Providing M-20 RCC cast insitu single rim bored pile of Running 2433.00 74.00
Bd-B 600 mm dia. each of load capacity as per design and of Meter
specified diameter of pile and bulb as directed, sunk to
the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
7/2 Providing M-25 RCC cast insitu single rim bored pile of Running 587.00 74.00
Bd-B 225 mm dia. each of load capacity as per design and of Meter
specified diameter of pile and bulb as directed, sunk to
the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
8/2 Providing M-25 RCC cast insitu single rim bored pile of Running 777.00 74.00
Bd-B 300 mm dia. each of load capacity as per design and of Meter
specified diameter of pile and bulb as directed, sunk to
the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
9/2 Providing M-25 RCC cast insitu single rim bored pile of Running 1118.00 74.00
Bd-B 380 mm dia. each of load capacity as per design and of Meter
specified diameter of pile and bulb as directed, sunk to
the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
10 / 2 Providing M-25 RCC cast insitu single rim bored pile of Running 1516.00 74.00
Bd-B 450 mm dia. each of load capacity as per design and of Meter
specified diameter of pile and bulb as directed, sunk to
the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
11 / 2 Providing M-20 RCC cast insitu double rim bored pile of Running 583.00 74.00
Bd-B 225 mm dia. each of load capacity as per design and of Meter
specified diameter of pile and bulb as directed, sunk to
the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
12 / 2 Providing M-20 RCC cast insitu double rim bored pile Running 853.00 74.00
Bd-B of 300 mm dia. each of load capacity as per design and Meter
of specified diameter of pile and bulb as directed, sunk
to the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
13 / 2 Providing M-20 RCC cast insitu double rim bored pile Running 1282.00 74.00
Bd-B of 380 mm dia. each of load capacity as per design and Meter
of specified diameter of pile and bulb as directed, sunk
to the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
14 / 2 Providing M-20 RCC cast insitu double rim bored pile Running 1802.00 74.00
Bd-B of 450 mm dia. each of load capacity as per design and Meter
of specified diameter of pile and bulb as directed, sunk
to the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
15 / 2 Providing M-25 RCC cast insitu double rim bored pile Running 619.00 74.00
Bd-B of 225 mm dia. each of load capacity as per design and Meter
of specified diameter of pile and bulb as directed, sunk
to the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
16 / 2 Providing M-25 RCC cast insitu double rim bored pile Running 929.00 74.00
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
Bd-B of 300 mm dia. each of load capacity as per design and Meter
of specified diameter of pile and bulb as directed, sunk
to the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
17 / 2 Providing M-25 RCC cast insitu double rim bored pile Running 1421.00 74.00
Bd-B of 380 mm dia. each of load capacity as per design and Meter
of specified diameter of pile and bulb as directed, sunk
to the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
18 / 2 Providing M-25 RCC cast insitu double rim bored pile Running 2015.00 74.00
Bd-B of 450 mm dia. each of load capacity as per design and Meter
of specified diameter of pile and bulb as directed, sunk
to the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
19 / 2 Providing M-25 RCC cast insitu double rim bored pile Running 2976.00 74.00
Bd-B of 535 mm dia. each of load capacity as per design and Meter
of specified diameter of pile and bulb as directed, sunk
to the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
20 / 2 Providing M-25 RCC cast insitu double rim bored pile Running 3911.00 74.00
Bd-B of 600 mm dia. each of load capacity as per design and Meter
of specified diameter of pile and bulb as directed, sunk
to the required depth through all strata except
rock,excluding provision of reinforcement including
placing reversible drum type concrete mixer concrete by
tremie arrangement compaction of concrete etc.
complete.
Spec. No.: Bd-F
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
2/3 Providing and fabricating structural steel work in Metric 65724.00 4620.00
BDC 3 rolled sections, fixed with connecting plates or Tonne
angle cleats in main and cross beams, hip and
jack rafters, purlins connecting to truss members
and the like, as per detailed designs and drawing
or as directed including cutting, fabricating,
hoisting, erecting, fixing in position, making
riveted/ bolted/ welded connections and one coat
of anticorrosive paint and over it two coats of oil
painting complete
Spec. No.: Bd.C.3 Page No. 275
3/3 Providing structural steel work in single stanchions Metric 65943.00 5072.00
BDC 6 com-posed of R.S.J. Channel etc. with caps, Tonne
bases, mild steel plated, angle brackets, cleats,
gusset plates, anchor bolts etc. as per detailed
designs and drawings or as directed including
cutting, fabrication, hoisting, erecting fixing in
position, making riveted/ bolted/ welded
connection and one coat of anticorrosive paint and
over it two. coats of oil painting complete etc.
Spec. No.: Bd.C.6 Page No. 277
4/3 Providing structural steel work in trusses, other Metric 75856.00 13551.00
BDC 8 similar trussed purlins and members with all Tonne
bracing, gusset plates etc. as per detailed designs
and drawings or as directed including cutting,
fabricating, hoisting, erecting fixing in position,
Making riveted/ bolted/ welded connection and
one coat of anticorrosive paint and over it 2 coats
of oil painting complete,
Spec. No.: Bd.C.8 Page No. 278
5/3 Providing and fixing 50 mm. dia. medium class Square 3702.00 1492.00
BDC G.I.pipe gate with wicket gate of approved drawing Meter
with all fixtures & fittings in two leaves with strong
hold fast embedded in c.c. block at top & bottom
with locking arrangement including cutting,
bending, making holes and with one coat of primer
complete.
Spec. No.: As directed by Engineer in charge.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
6/3 Providing and erecting structural steel for sakav Metric 86937.00 13966.00
BDC with all bracing gusset plates etc. as per detailed Tonne
design and drawing or as directed including
cutting, fabrication, hoisting, erecting, fixing in
position, making riveted/ bolted/welded connection
and oil painting with 2 coats complete.
Spec. No.: As directed by Engineer in charge.
7/3 Providing, hoisting and fixing in position mild steel Metric 69596.00 13622.00
BDC Tubular Trusses of required span as per drawing Tonne
and design including purlins, wind bracing,
runners, gusset plates foundations bolts including
painting 3 coats of oil paint approved quality and
shade, scaffolding etc. complete as per ISI
specifications.
Spec. No.: B-18 Page No. 78
8/3 Providing Gas or Electrical welding for structural Centimeter 6.00 3.00
BDC steel section, plates as per detailed drawing. For
less than 10 mm thick section.
Spec. No.: B.18, Page No 78
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
2ii a / 4 Providing and casting in situ cement concrete M- Cubic 5640.00 683.00
BDE 2 20 of trap/ granite/ quartzite/ gneiss metal for Meter
steps including centering, formwork, compacting,
roughening them if special finish is to be provided
and curing and finishing if required complete,with
fully automatic micro processor based PLC with
SCADA enabled reversible Drum Type mixer . .
With Natural sand.
Spec. No.: Bd.E.2 Page No. 288 and B.7 Page
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
No 38
2ii b / 4 Providing and casting in situ cement concrete M- Cubic 5532.00 683.00
BDE 2 20 of trap/ granite/ quartzite/ gneiss metal for Meter
steps including centering, formwork, compacting,
roughening them if special finish is to be provided
and curing and finishing if required complete, with
fully automatic micro processor based PLC with
SCADA enabled reversible Drum Type mixer ..
With Cushed sand.
Spec. No.: Bd.E.2 Page No. 288 and B.7 Page
No 38
3ii a / 4 Providing and casting in situ cement concrete M- Cubic 5472.00 683.00
BDE 4 20 of trap / granite /quartzite/ gneiss metal for Meter
bed blocks, foundation blocks and such other
items including bailing out water formwork,
compacting, roughening, them if special finish is
to be provided and curing and finishing if required
complete,with fully automatic micro processor
based PLC with SCADA enabled reversible Drum
Type mixer . . With natural sand.
Spec. No.: Bd.E.4 Page No. 289 and B-7, Page
No.38
3ii b / 4 Providing and casting in situ cement concrete M- Cubic 5364.00 683.00
BDE 4 20 of trap / granite /quartzite/ gneiss metal for Meter
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
No 38.
Page.No. 38
No.38
No.38
No.38
No.38
natural sand.
Spec. No.: Bd.F.11 Page No. 304 and B.7,
Page No. 38
8/5 Providing and fixing in position TMT - FE - 500 Metric 58908.00 4898.00
BDF 17 bar reinforcement of various diameters for Tonne
R.C.C. pile caps, footings, foundations, slabs,
beams columns, canopies, staircase, newels,
chajjas, lintels pardis, copings, fins, arches etc.
as per detailed designs, drawings and
schedules. including cutting, bending, hooking
the bars, binding with wires or tack welding and
supporting as required complete.
Spec. No.: Bd.F.17, Page No. 306
9/5 Providing and fixing in position after hoisting, Square 674.00 64.00
BDF 19 precast 1:2 cement mortar reinforcement Jali Meter
50mm thick of approved design cement mortar
1:3 and curing complete (including 6mm
diameter mild steel bar reinforcement).
Spec. No.: Bd. F. 19 Page No. 307
10A a i / 5 Providing and casting in situ c.c. M-20 of trap Cubic 8878.00 2038.00
BDF 6 & 8 metal for RCC rectangular grid beam with slab Meter
as per detailed design and drawing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
10A a ii / 5 Providing and casting in situ c.c. M-20 of trap Running 8793.00 2038.00
BDF 6 & 8 metal for RCC rectangular grid beam with slab Meter
as per detailed design and draw-ing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface or roughening them if special
finish is to be provided and curing
complete(Excluding reinforcement).With fully
automatic micro processor based PLC with
SCADA enabled reversible drum type concrete
mixer With Crushed sand.
Spec. No.: As directed by Engineer in charge.
10A b i / 5 Providing and casting in situ c.c. M-25 of trap Cubic 9420.00 2038.00
BDF 6 & 8 metal for RCC rectangular grid beam with slab Meter
as per detailed design and draw-ing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface or roughening them if special
finish is to be provided and curing complete
(Excluding reinforcement). With fully automatic
micro processor based PLC with SCADA
enabled reversible drum type concrete mixer
With natural sand.
Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page
No.302 and B.7 Page No. 38.
10A b ii / 5 Providing and casting in situ c.c. M-25 of trap Running 9335.00 2038.00
BDF 6 & 8 metal for RCC rectangular grid beam with slab Meter
as per detailed design and draw-ing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface or roughening them if special
finish is to be provided and curing complete
(Excluding reinforcement). With fully automatic
micro processor based PLC with SCADA
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
10A c i / 5 Providing and casting in situ c.c. M-30 of trap Cubic 9555.00 2038.00
BDF 41 metal for RCC rectangular grid beam with slab Meter
as per detailed design and draw-ing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface or roughening them if special
finish is to be provided and curing complete
(Excluding reinforcement).With fully automatic
micro processor based PLC with SCADA
enabled reversible drum type concrete mixer
With natural sand.
Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page
No.302 and B.7 Page No. 38.
10A c ii / 5 Providing and casting in situ c.c. M-30 of trap Cubic 9470.00 2038.00
BDF 41 metal for RCC rectangular grid beam with slab Meter
as per detailed design and draw-ing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface or roughening them if special
finish is to be provided and curing complete
(Excluding reinforcement). With fully automatic
micro processor based PLC with SCADA
enabled reversible drum type concrete mixer
With Crushed sand.
Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page
No.302 and B.7 Page No. 38.
10A d i / 5 Providing and casting in situ c.c. M-35 of trap Cubic 10134.00 2038.00
BDF 41 metal for RCC rectangular grid beam with slab Meter
as per detailed design and draw-ing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface or roughening them if special
finish is to be provided and curing complete
(Excluding reinforcement).With fully automatic
micro processor based PLC with SCADA
enabled reversible drum type concrete mixer
With natural sand.
Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page
No.302 and B.7 Page No. 38.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
10A d ii / 5 Providing and casting in situ c.c. M-35 of trap Cubic 10049.00 2038.00
BDF 41 metal for RCC rectangular grid beam with slab Meter
as per detailed design and draw-ing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface or roughening them if special
finish is to be provided and curing complete
(Excluding reinforcement).With fully automatic
micro processor based PLC with SCADA
enabled reversible drum type concrete mixer
With Crushed sand.
Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page
No.302 and B.7 Page No. 38.
10A e i / 5 Providing and casting in situ c.c. M-40 of trap Cubic 10167.00 2038.00
BDF 41 metal for RCC rectangular grid beam with slab Meter
as per detailed design and draw-ing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface or roughening them if special
finish is to be provided and curing complete
(Excluding reinforcement).With fully automatic
micro processor based PLC with SCADA
enabled reversible drum type concrete mixer
With natural sand.
Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page
No.302 and B.7 Page No. 38.
10A e ii / 5 Providing and casting in situ c.c. M-40 of trap Cubic 10083.00 2038.00
BDF 41 metal for RCC rectangular grid beam with slab Meter
as per detailed design and draw-ing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface or roughening them if special
finish is to be provided and curing complete
(Excluding reinforcement).With fully automatic
micro processor based PLC with SCADA
enabled reversible drum type concrete mixer
With Crushed sand.
Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page
No.302 and B.7 Page No. 38.
10B a i / 5 Providing and casting in situ c.c. M-20 of trap Cubic 9885.00 2080.00
BDF 6 & 8 metal for RCC rectangular grid beam with slab Meter
as per detailed design and drawing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
10B a ii / 5 Providing and casting in situ c.c. M-20 of trap Cubic 9777.00 2080.00
BDF 6 & 8 metal for RCC rectangular grid beam with slab Meter
as per detailed design and draw-ing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface or roughening them if special
finish is to be provided and curing complete
(Excluding reinforcement).with fully automatic
micro processor based PLC with SCADA
enabled concrete batch mix plant (pan mixer)....
With Crushed sand.
Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page
No.302 and B.7 Page No. 38.
10B b i / 5 Providing and casting in situ c.c. M-25 of trap Cubic 10776.00 2080.00
BDF 6 & 8 metal for RCC rectangular grid beam with slab Meter
as per detailed design and draw-ing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface or roughening them if special
finish is to be provided and curing complete
(Excluding reinforcement). with fully automatic
micro processor based PLC with SCADA
enabled concrete batch mix plant (pan mixer)...
With natural sand.
Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page
No.302 and B.7 Page No. 38.
10B b ii / 5 Providing and casting in situ c.c. M-25 of trap Cubic 10669.00 2080.00
BDF 6 & 8 metal for RCC rectangular grid beam with slab Meter
as per detailed design and draw-ing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface or roughening them if special
finish is to be provided and curing complete
(Excluding reinforcement). with fully automatic
micro processor based PLC with SCADA
enabled concrete batch mix plant (pan
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
10B c ii / 5 Providing and casting in situ c.c. M-30 of trap Cubic 10574.00 2080.00
BDF metal for RCC rectangular grid beam with slab Meter
as per detailed design and draw-ing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface or roughening them if special
finish is to be provided and curing complete
(Excluding reinforcement). with fully automatic
micro processor based PLC with SCADA
enabled concrete batch mix plant (pan mixer)...
With Crushed sand.
Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page
No.302 and B.7 Page No. 38.
10B d i / 5 Providing and casting in situ c.c. M-35 of trap Cubic 11029.00 2080.00
BDF metal for RCC rectangular grid beam with slab Meter
as per detailed design and draw-ing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface or roughening them if special
finish is to be provided and curing complete
(Excluding reinforcement). with fully automatic
micro processor based PLC with SCADA
enabled concrete batch mix plant (pan mixer)...
With natural sand.
Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page
No.302 and B.7 Page No. 38.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
10B d ii / 5 Providing and casting in situ c.c. M-35 of trap Cubic 10921.00 2080.00
BDF metal for RCC rectangular grid beam with slab Meter
as per detailed design and draw-ing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface or roughening them if special
finish is to be provided and curing complete
(Excluding reinforcement). with fully automatic
micro processor based PLC with SCADA
enabled concrete batch mix plant (pan mixer)...
With Crushed sand.
Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page
No.302 and B.7 Page No. 38.
10B e i / 5 Providing and casting in situ c.c. M-40 of trap Cubic 11133.00 2080.00
BDF 41 metal for RCC rectangular grid beam with slab Meter
as per detailed design and draw-ing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface or roughening them if special
finish is to be provided and curing complete
(Excluding reinforcement). with fully automatic
micro processor based PLC with SCADA
enabled concrete batch mix plant (pan mixer)...
With natural sand.
Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page
No.302 and B.7 Page No. 38.
10B e ii / 5 Providing and casting in situ c.c. M-40 of trap Cubic 11025.00 2080.00
BDF 41 metal for RCC rectangular grid beam with slab Meter
as per detailed design and draw-ing or as
directed including dewatering if necessary,
centering, formwork, cover blocks compacting,
finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth
and even surface or roughening them if special
finish is to be provided and curing complete
(Excluding reinforcement). with fully automatic
micro processor based PLC with SCADA
enabled concrete batch mix plant (pan
mixer)...With Crushed sand.
Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page
No.302 and B.7 Page No. 38.
11A / 5 Providing and fixing fan hook box of 2 mm thick Number 259.00 12.00
BDF M.S. sheet rectangular size 180x100 mm with
required depth with holes or notches as
required, bottom and top sides of 1.6 mm M.S.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
12a i / 5 Providing and laying in situ cement concrete M Cubic 6028.00 645.00
BDF 3a,b - 25 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C.work in
foundations like raft, strip, foundations, grillage
and footings of R.C.C. columns and steel
stanchions etc .including bailing out water,
formwork, cover blocks, compaction, curing
and roughening the surface if special finish is to
be provided ( Excluding reinforcement &
structural steel ) complete With Natural Sand ---
( Item to be used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 3 page No. 298 and B-7, Page
No. 38
12a ii / 5 Providing and laying in situ cement concrete M Cubic 5920.00 645.00
BDF 3a,b - 25 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C.work in
foundations like raft, strip, foundations, grillage
and footings of R.C.C. columns and steel
stanchions etc .including bailing out water,
formwork, cover blocks, compaction, curing
and roughening the surface if special finish is to
be provided ( Excluding reinforcement &
structural steel ) complete.With Crushed Sand --
-( Item to be used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 3 page No. 298 and B-7, Page
No. 38
12b i / 5 Providing and laying in situ cement concrete M Cubic 6314.00 645.00
BDF 3a,b - 30 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C.work in
foundations like raft, strip, foundations, grillage
and footings of R.C.C. columns and steel
stanchions etc .including bailing out water,
formwork, cover blocks, compaction, curing and
roughening the surface if special finish is to be
provided ( Excluding reinforcement & structural
steel ) complete. With Natural Sand ---( Item to
be used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 3 page No. 298 and B-7, Page
No. 38
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
12b ii / 5 Providing and laying in situ cement concrete M Cubic 6206.00 645.00
BDF 3a,b - 30 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C.work in
foundations like raft, strip, foundations, grillage
and footings of R.C.C. columns and steel
stanchions etc .including bailing out water,
formwork, cover blocks, compaction, curing and
roughening the surface if special finish is to be
provided ( Excluding reinforcement & structural
steel ) complete With Crushed Sand ---( Item
to be used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 3 page No. 298 and B-7, Page
No. 38
12c i / 5 Providing and laying in situ cement concrete M Cubic 6723.00 645.00
BDF 3a,b - 35 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C.work in
foundations like raft, strip, foundations, grillage
and footings of R.C.C. columns and steel
stanchions etc .including bailing out water,
formwork, cover blocks, compaction, curing and
roughening the surface if special finish is to be
provided ( Excluding reinforcement & structural
steel ) complete With Natural Sand ---( Item to
be used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 3 page No. 298 and B-7, Page
No. 38
12c ii / 5 Providing and laying in situ cement concrete M Cubic 6615.00 645.00
BDF 3a,b - 35 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C.work in
foundations like raft, strip, foundations, grillage
and footings of R.C.C. columns and steel
stanchions etc .including bailing out water,
formwork, cover blocks, compaction, curing and
roughening the surface if special finish is to be
provided ( Excluding reinforcement & structural
steel ) complete With Crushed Sand ---( Item
to be used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 3 page No. 298 and B-7, Page
No. 38
12d i / 5 Providing and laying in situ cement concrete M Cubic 6845.00 645.00
BDF 3a,b - 40 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C.work in
foundations like raft, strip, foundations, grillage
and footings of R.C.C. columns and steel
stanchions etc .including bailing out water,
formwork, cover blocks, compaction, curing and
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
12d ii / 5 Providing and laying in situ cement concrete M Cubic 6737.00 645.00
BDF 3a,b - 40 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C.work in
foundations like raft, strip, foundations, grillage
and footings of R.C.C. columns and steel
stanchions etc .including bailing out water,
formwork, cover blocks, compaction, curing and
roughening the surface if special finish is to be
provided ( Excluding reinforcement & structural
steel ) complete. With Crushed Sand ---( Item
to be used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 3 page No. 298 and B-7, Page
No. 38
13i a / 5 Providing and laying in situ cement concrete M Cubic 8478.00 833.00
BDF 3a,b - 25 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C.columns
as per detailed designs & drawing or as directed
including centering, formwork, cover blocks,
compaction, curing and roughening the surface
if special finish is to be provided ( Excluding
reinforcement & structural steel ) complete.
With Natural Sand ---( Item to be used with
prior permission of Superintending Engineer
)
Spec. No.: Bd. F 5 page No. 300 and B-7, Page
No. 38
13i b / 5 Providing and laying in situ cement concrete M Cubic 8370.00 833.00
BDF 3a,b - 25 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C.columns
as per detailed designs & drawing or as directed
including centering, formwork, cover
blocks,compaction, curing and roughening the
surface if special finish is to be provided (
Excluding reinforcement & structural steel )
complete With Crushed Sand ---( Item to be
used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 5 page No. 300 and B-7, Page
No. 38
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
13ii a / 5 Providing and laying in situ cement concrete M Cubic 8764.00 833.00
BDF 3a,b - 30 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C.columns
as per detailed designs & drawing or as directed
including centering, formwork, cover blocks,
compaction, curing and roughening the surface
if special finish is to be provided ( Excluding
reinforcement & structural steel ) complete With
Natural Sand ---( Item to be used with prior
permission of Superintending Engineer )
Spec. No.: Bd. F 5 page No. 300 and B-7, Page
No. 38
13ii b / 5 Providing and laying in situ cement concrete M Cubic 8656.00 833.00
BDF 3a,b - 30 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C.columns
as per detailed designs & drawing or as directed
including centering, formwork, cover blocks,
compaction, curing and roughening the surface
if special finish is to be provided ( Excluding
reinforcement & structural steel ) complete With
Crushed Sand ---( Item to be used with prior
permission of Superintending Engineer )
Spec. No.: Bd. F 5 page No. 300 and B-7, Page
No. 38
13iii a / 5 Providing and laying in situ cement concrete M Cubic 9173.00 833.00
BDF 3a,b - 35 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C.columns
as per detailed designs & drawing or as directed
including centering, formwork, cover blocks,
compaction, curing and roughening the surface
if special finish is to be provided ( Excluding
reinforcement & structural steel ) complete.
With Natural Sand ---( Item to be used with
prior permission of Superintending Engineer
)
Spec. No.: Bd. F 5 page No. 300 and B-7, Page
No. 38
13iii b / 5 Providing and laying in situ cement concrete M Cubic 9065.00 833.00
BDF 3a,b - 35 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C.columns
as per detailed designs & drawing or as directed
including centering, formwork, cover blocks,
compaction, curing and roughening the surface
if special finish is to be provided ( Excluding
reinforcement & structural steel ) complete. With
Crushed Sand ---( Item to be used with prior
permission of Superintending Engineer )
Spec. No.: Bd. F 5 page No. 300 and B-7, Page
No. 38
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
13iv a / 5 Providing and laying in situ cement concrete M Cubic 9295.00 833.00
BDF 3a,b - 40 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C.columns
as per detailed designs & drawing or as directed
including centering, formwork, cover blocks,
compaction, curing and roughening the surface
if special finish is to be provided ( Excluding
reinforcement & structural steel ) complete.
With Natural Sand ---( Item to be used with
prior permission of Superintending Engineer
)
Spec. No.: Bd. F 5 page No. 300 and B-7, Page
No. 38
13iv b / 5 Providing and laying in situ cement concrete M Cubic 9187.00 833.00
BDF 3a,b - 40 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C.columns
as per detailed designs & drawing or as directed
including centering, formwork, cover blocks,
compaction, curing and roughening the surface
if special finish is to be provided ( Excluding
reinforcement & structural steel ) complete.
With Crushed Sand ---( Item to be used with
prior permission of Superintending Engineer
)
Spec. No.: Bd. F 5 page No. 300 and B-7, Page
No. 38
14i a / 5 Providing and laying in situ cement concrete M Cubic 7601.00 1234.00
BDF 3a,b - 25 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C. beams
and lintels as per detailed designs & drawing or
as directed including centering, formwork, cover
blocks, compaction, curing and roughening the
surface if special finish is to be provided (
Excluding reinforcement & structural steel )
complete. With Natural Sand ---( Item to be
used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F6 page No. 300 and B-7, Page
No. 38
14i b / 5 Providing and laying in situ cement concrete M Cubic 7493.00 1234.00
BDF 3a,b - 25 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C.beams
and lintels as per detailed designs & drawing or
as directed including centering, formwork, cover
blocks, compaction, curing and roughening the
surface if special finish is to be provided (
Excluding reinforcement & structural steel )
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
14ii a / 5 Providing and laying in situ cement concrete M Cubic 7887.00 1234.00
BDF 3a,b - 30 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C. beams
and lintels as per detailed designs & drawing or
as directed including centering, formwork, cover
blocks, compaction, curing and roughening the
surface if special finish is to be provided (
Excluding reinforcement & structural steel )
complete. With Natural Sand ---( Item to be
used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 6 page No. 300 and B-7, Page
No. 38
14ii b / 5 Providing and laying in situ cement concrete M Cubic 7779.00 1234.00
BDF 3a,b - 30 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C.beams
and lintels as per detailed designs & drawing or
as directed including centering, formwork, cover
blocks, compaction, curing and roughening the
surface if special finish is to be provided (
Excluding reinforcement & structural steel )
complete With Crushed Sand ---( Item to be
used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 6 page No. 300 and B-7, Page
No. 38
14iii a / 5 Providing and laying in situ cement concrete M Cubic 8300.00 1234.00
BDF 3a,b - 35 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C. beams
and lintels as per detailed designs & drawing or
as directed including centering, formwork, cover
blocks, compaction, curing and roughening the
surface if special finish is to be provided (
Excluding reinforcement & structural steel )
complete. With Natural Sand ---( Item to be
used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 6 page No. 300 and B-7, Page
No. 38
14iii b / 5 Providing and laying in situ cement concrete M Cubic 8192.00 1234.00
BDF 3a,b - 35 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C.beams
and lintels as per detailed designs & drawing or
as directed including centering, formwork, cover
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
14iv a / 5 Providing and laying in situ cement concrete M Cubic 8418.00 1234.00
BDF 3a,b - 40 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C.beams
and lintels as per detailed designs & drawing or
as directed including centering, formwork, cover
blocks, compaction, curing and roughening the
surface if special finish is to be provided (
Excluding reinforcement & structural steel )
complete. With Natural Sand ---( Item to be
used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 6 page No. 300 and B-7, Page
No. 38
14iv b / 5 Providing and laying in situ cement concrete M Cubic 8310.00 1234.00
BDF 3a,b - 40 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C.beams
and lintels as per detailed designs & drawing or
as directed including centering, formwork, cover
blocks, compaction, curing and roughening the
surface if special finish is to be provided (
Excluding reinforcement & structural steel )
complete With Crushed Sand---( Item to be
used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 6 page No. 300 and B-7, Page
No. 38
15i a / 5 Providing and laying in situ cement concrete M Cubic 9083.00 1170.00
BDF 3a,b - 25 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C. Slabs
and Landings as per detailed designs & drawing
or as directed including centering, formwork,
cover blocks, compaction, curing and
roughening the surface if special finish is to be
provided ( Excluding reinforcement & structural
steel ) complete With Natural Sand ---( Item to
be used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 8 page No. 302 and B-7, Page
No. 38
15i b / 5 Providing and laying in situ cement concrete M Cubic 8975.00 1170.00
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
15ii a / 5 Providing and laying in situ cement concrete M Cubic 9369.00 1170.00
BDF 3a,b - 30 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C. Slabs
and Landings as per detailed designs & drawing
or as directed including centering, formwork,
cover blocks, compaction, curing and
roughening the surface if special finish is to be
provided ( Excluding reinforcement & structural
steel ) complete. With Natural Sand ---( Item
to be used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 8 page No. 302 and B-7, Page
No. 38
15ii b / 5 Providing and laying in situ cement concrete M Cubic 9261.00 1170.00
BDF 3a,b - 30 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C. Slabs
and Landings as per detailed designs & drawing
or as directed including centering, formwork,
cover blocks, compaction, curing and
roughening the surface if special finish is to be
provided ( Excluding reinforcement & structural
steel ) complete. With Crushed Sand ---( Item
to be used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 8 page No. 302 and B-7, Page
No. 38
15iii a / 5 Providing and laying in situ cement concrete M Cubic 9777.00 1170.00
BDF 3a,b - 35 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C. Slabs
and Landings as per detailed designs & drawing
or as directed including centering, formwork,
cover blocks, compaction, curing and
roughening the surface if special finish is to be
provided ( Excluding reinforcement & structural
steel ) complete. With Natural Sand ---( Item
to be used with prior permission of
Superintending Engineer )
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
15iii b / 5 Providing and laying in situ cement concrete M Cubic 9670.00 1170.00
BDF 3a,b - 35 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C. Slabs
and Landings as per detailed designs & drawing
or as directed including centering, formwork,
cover blocks, compaction, curing and
roughening the surface if special finish is to be
provided ( Excluding reinforcement & structural
steel ) complete With Crushed Sand ---( Item
to be used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 8 page No. 302 and B-7, Page
No. 38
15iv a / 5 Providing and laying in situ cement concrete M Cubic 9900.00 1170.00
BDF 3a,b - 40 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C. Slabs
and Landings as per detailed designs & drawing
or as directed including centering, formwork,
cover blocks, compaction, curing and
roughening the surface if special finish is to be
provided ( Excluding reinforcement & structural
steel ) complete With Natural Sand ---( Item to
be used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 8 page No. 302 and B-7, Page
No. 38
15iv b / 5 Providing and laying in situ cement concrete M Cubic 9792.00 1170.00
BDF 3a,b - 40 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C. Slabs
and Landings as per detailed designs & drawing
or as directed including centering, formwork,
cover blocks, compaction, curing and
roughening the surface if special finish is to be
provided ( Excluding reinforcement & structural
steel ) complete With Crushed Sand ---( Item
to be used with prior permission of
Superintending Engineer )
Spec. No.: Bd. F 8 page No. 302 and B-7, Page
No. 38
16i a / 5 Providing and laying in situ cement concrete M Cubic 9352.00 1853.00
BDF 3a,b - 25 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C.
Rectangular grid beam with slab as per detailed
designs & drawing or as directed including
centering, formwork, cover blocks, compaction,
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
16i b / 5 Providing and laying in situ cement concrete M Cubic 9244.00 1853.00
BDF 3a,b - 25 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C.
Rectangular grid beam with slab as per detailed
designs & drawing or as directed including
centering, formwork, cover blocks, compaction,
curing and roughening the surface if special
finish is to be provided ( Excluding
reinforcement & structural steel ) complete.
With Crushed Sand ---( Item to be used with
prior permission of Superintending Engineer
)
Spec. No.: Bd. F 6 page No. 300, B-7, Page
No. 38 and Bd. F 8 page No. 302
16ii a / 5 Providing and laying in situ cement concrete M Cubic 9638.00 1853.00
BDF 3a,b - 30 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C.
Rectangular grid beam with slab as per detailed
designs & drawing or as directed including
centering, formwork, cover blocks, compaction,
curing and roughening the surface if special
finish is to be provided ( Excluding
reinforcement & structural steel ) complete.
With Natural Sand ---( Item to be used with
prior permission of Superintending Engineer
)
Spec. No.: Bd. F 6 page No. 300, B-7, Page
No. 38 and Bd. F 8 page No. 302
16ii b / 5 Providing and laying in situ cement concrete M Cubic 9530.00 1853.00
BDF 3a,b - 30 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C.
Rectangular grid beam with slab as per detailed
designs & drawing or as directed including
centering, formwork, cover blocks, compaction,
curing and roughening the surface if special
finish is to be provided ( Excluding
reinforcement & structural steel ) complete.
With Crushed Sand---( Item to be used with
prior permission of Superintending Engineer
)
Spec. No.: Bd. F 6 page No. 300, B-7, Page
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
16iii a / 5 Providing and laying in situ cement concrete M Cubic 10047.00 1853.00
BDF 3a,b - 35 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C.
Rectangular grid beam with slab as per detailed
designs & drawing or as directed including
centering, formwork, cover blocks, compaction,
curing and roughening the surface if special
finish is to be provided ( Excluding
reinforcement & structural steel ) complete.
With Natural Sand ---( Item to be used with
prior permission of Superintending Engineer
)
Spec. No.: Bd. F 6 page No. 300, B-7, Page
No. 38 and Bd. F 8 page No. 302
16iii b / 5 Providing and laying in situ cement concrete M Cubic 9939.00 1853.00
BDF 3a,b - 35 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C.
Rectangular grid beam with slab as per detailed
designs & drawing or as directed including
centering, formwork, cover blocks, compaction,
curing and roughening the surface if special
finish is to be provided ( Excluding
reinforcement & structural steel ) complete With
Crushed Sand ---( Item to be used with prior
permission of Superintending Engineer )
Spec. No.: Bd. F 6 page No. 300, B-7, Page
No. 38 and Bd. F 8 page No. 302
16iv a / 5 Providing and laying in situ cement concrete M Cubic 10169.00 1853.00
BDF 3a,b - 40 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Natural Sand for R.C.C.
Rectangular grid beam with slab as per detailed
designs & drawing or as directed including
centering, formwork, cover blocks, compaction,
curing and roughening the surface if special
finish is to be provided ( Excluding
reinforcement & structural steel ) complete.
With Natural Sand ---( Item to be used with
prior permission of Superintending Engineer
)
Spec. No.: Bd. F 6 page No. 300, B-7, Page
No. 38 and Bd. F 8 page No. 302
16iv b / 5 Providing and laying in situ cement concrete M Cubic 10062.00 1853.00
BDF 3a,b - 40 Ready mix of trap /granite /quartzite Meter
/gneiss metal, Crushed Sand for R.C.C.
Rectangular grid beam with slab as per detailed
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
2/6 Providing first class Burnt Brick masonry with Cubic 5103.00 769.00
BDG 2 conventional/ I.S. type bricks in cement mortar Meter
1:6 in plinth including bailing out water, striking
joints on unexposed faces, pointing with
cement mortar 1:3 on exposed face and
watering Complete.
Spec. No.: Bd.G.2 Page No. 313
3/6 Providing second class Burnt Brick masonry Cubic 4804.00 591.00
BDG 3 with conventional/ I.S. type bricks in cement Meter
mortar 1:6 in plinth as backing in composite
masonry including bailing out water, striking
joints, racking out joints and watering
Complete.
Spec. No.: Bd.G.3 Page No. 314
4/6 Providing second class Burnt Brick masonry Cubic 4984.00 737.00
BDG 5 with conventional/ I.S. type bricks in cement Meter
mortar 1:6 in superstructure including striking
joints, racking out joints, watering and
scaffolding Complete.
Spec. No.: Bd.G.5 Page No. 315
5/6 Providing second class Burnt Brick masonry Square 675.00 88.00
BDG 7 with conventional/ I.S. type bricks in cement Meter
mortar 1:4 in half brick thick wall including mild
steel longitudinal reinforcement of 2 bars of 6
mm diameter / 2 hoop iron strips 25 mm X 1.6
mm at every third course, properly bent and
bonded at ends scaffolding, racking out joints
and watering Complete.
Spec. No.: Bd.G.7 Page No. 316
7a / 6 Providing first class Burnt Brick masonry with Cubic 5357.00 1104.00
BDG 9 conventional / I.S. type bricks in cement mortar Meter
1:4 including scaffolding, racking out joints
pointing in C.M. 1:3 and watering in pillars of
rectangular or square shape as shown on the
drawing or as directed complete.
Spec. No.: Bd.G.9 (a) Page No. 317
10 / 6 Providing Second class fly ash brick masonry Square 810.00 88.00
BDG with conventional / I.S. type bricks in cement Meter
mortar 1:4 in half brick thick wall including mild
steel longitudinal reinforcement of two bars of 6
mm diameter / two hoop iron strips 25 mm x
1.60 mm at every third course, properly bent
and bounded at ends scaffolding raking out
joints and watering etc. complete.
Spec. No.: Bd. G. 7 Page 316
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
2/7 Providing uncoursed rubble masonry of trap / granite Cubic 3091.00 1045.00
BDH 2 / quartzite / gneiss stones in cement mortar 1:5 in Meter
basements including scaffolding, bailing out water,
racking out joints when plastering is to be done
striking joints where no pointing or plastering is to be
done and watering complete.
Spec. No.: Bd.H.2 Page No. 329
3/7 Providing uncoursed rubble masonry of trap / granite Cubic 3576.00 1044.00
BDH 3 / quartzite / gneiss stone in cement mortar 1:3 in Meter
basement with patent water proofing compound
added to it at rate of 1 kg per bag of cement
including bailing out water, scaffolding racking out
joints when plastering is to be done and watering
complete.
Spec. No.: Bd.H.3 Page No. 331
4/7 Providing uncoursed rubble masonry of trap / granite Cubic 3260.00 1125.00
BDH 4 / quartzite / gneiss stones in cement mortar 1:6 in Meter
superstructure including racking out joints when
plastering is to be done / striking joints when no
plastering is to be done watering and scaffolding
complete.
Spec. No.: Bd.H.4 Page No. 331
5/7 Providing random rubble masonry second sort of Cubic 3012.00 1045.00
BDH 5 trap / granite / quartzite / gneiss stones in cement Meter
mortar 1:6 in plinth including bailing out water ,
striking joints on unexposed faces. (Excluding
pointing) complete.
Spec. No.: Bd.H.5 Page No. 331
6/7 Providing random rubble masonry second sort of Cubic 3260.00 1161.00
BDH 6 trap / granite / quartzite / gneiss stones in cement Meter
mortar 1:6 in superstructure racking out joints when
plastering is to be done / striking joints when no
pointing or plastering is to be done on the inside
watering and scaffolding complete.
Spec. No.: Bd.H.6 Page No. 332
7/7 Providing random rubble masonry first sort of trap / Cubic 3297.00 1292.00
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
8/7 Providing random rubble masonry first sort of trap Cubic 3433.00 1357.00
BDH 8 /granite / quartzite / gneiss stones in cement mortar Meter
1:6 in superstructure including racking out joints
from outside and striking joints when no pointing or
plastering is to be done from inside watering and
scaffolding complete.
Spec. No.: Bd.H.8 Page No. 332
9/7 Providing coursed rubble masonry second sort of Cubic 6201.00 1292.00
BDH 11 trap / granite / quartzite / gneiss stones in cement Meter
mortar 1:6 in external walls of plinth including bailing
out water, striking joints inside and racking out joints
from outside and watering complete
Spec. No.: Bd. H.11 Page No. 333
11 / 7 Providing coursed rubble masonry first sort of trap / Cubic 6381.00 1507.00
BDH 13 granite / quartzite / gneiss stones in cement mortar Meter
1:6 in external work of plinth including bailing out
water, striking joints inside and watering complete.
Spec. No.: Bd.H.13 Page No. 333
12 / 7 Providing coursed rubble masonry first sort of trap / Cubic 6852.00 1693.00
BDH 14 granite / quartzite / gneiss stones in cement mortar Meter
1:6 in superstructure including racking out joints on
the inside when plastering is to be done, watering
and scaffolding complete.
Spec. No.: Bd.H.14 Page No. 333
13 / 7 Providing coursed rubble masonry first sort for pillars Cubic 6955.00 1830.00
BDH 40 of trap / granite / quartzite / gneiss stones in cement Meter
mortar 1:6 including pointing with cement mortar 1:3
scaffolding and watering complete.
Spec. No.: Bd.H.40 Page No. 345
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
2/8 Providing and laying masonry of I.S. Standard Square 717.00 118.00
BDI 1 C.C. hollow block 200 x 200 x 400 mm in Meter
cement mortar 1:6 proportion for superstructure
including curing, scaffolding etc. complete.
Spec. No.: Bd.I.1 Page No. 349
2/9 Providing and applying Bitumen layer at 2 kg. per Square 149.00 16.00
BDJ 3 square meter over the terrace, structural slab Meter
including cleaning the surface for waterproofing as
directed complete
Spec. No.: Bd.J.3 Page No. 356
3/9 Providing leak proof treatment by Injection grouting Litre 21.00 8.00
BDJ method to old floor without removing tiles of W.C.,
bath, with cement sand proportion of 1:1.5 and
waterproofing compound at 2 kg/bag of cement
mixed in 35 liters of water including drilling holes
in required position grouting with above mixed
solution and ceiling etc. complete.
Spec. No.: As directed by Engineer in charge.
4/9 Providing & laying water proof treatment of terrace Square 590.00 237.00
BDJ slab with B.B. Coba in all position with an average Meter
thickness of 112 mm consisting specialised
materials as per the manufactures specifications
and covering 10 years guarantee on court fee
stamp paper including all lead, lift, etc. complete.
Spec. No.: As directed by Engineer in charge.
5/9 Providing water proof bedding for flooring of Bath Square 309.00 113.00
BDJ and W.C. 25 mm thick in C.M.1:3 including using 1 Meter
kg of water proof compound per bag of cement
including leveling curing etc. complete.
Spec. No.: As directed by Engineer in charge.
6/9 Removing the tar or coba and disposing of the Square 11.00 11.00
BDJ material as directed etc. complete. Meter
Spec. No.: As directed by Engineer in charge.
7/9 Providing and applying water proofing treatment Square 607.00 300.00
BDJ using acrylic polymer modified cement based water Meter
proofing coating with fibre glass mesh mixing at the
rate of powder to liquid (2:1) by weight convering 9
to 10 sqm /kg with two coat using Dr. Fixit or alike
of chemicals for masonry and concrete surface by
brush covering 7 years guarantee on Stamp
Papers etc. complete.
Spec. No.: As directed by Engineer in charge
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
8/9 Providing and laying jointless Polydee-LM, a highly Square 750.00 31.00
BDJ flexible elastometric coating for RCC / cementitious Meter
surface for terrace waterproofing on B.B. Coba /
R.C.C, after application of TP-42 Primer on
perfectly clean surface (free from loose dust and
foreign matter) application of 1st coat of Polydee-
LM @ 700 gms/sqm and applying 2nd coat of
Polydee-LM @ 700 gms/sqm and finishing the
same with sprinkling the AG-10 granules on the
wet coating. (After finishing covering the treatment
with 25mm cement plaster for protection with
fibrillated 6mm Plyplast fibre @ 125 gms/sqm to
be paid in separate item.) covering 7 years
guarantee on Court Fee Stamp Paper of Rs. 100/-
etc. complete.
Spec. No.: As directed by Engineer in charge
9/9 Providing and applying a base coat comprising of 1 Square 664.00 41.00
BDJ Kg Polydee-MC and 1 Kg fresh cement after Meter
wetting the surface followed by drying the surface
for 2 days, apply primer coat of TP-40 and after
drying, applying Polydee-11 two component
(mixing ratio 2 A : 1 B) ) Antibacterial food grade
coating inside drinking water tank in two coats with
time interval of minimum 8 hrs. covering 7 years
guarantee on Court Fee Stamp Paper of Rs. 100/-
etc. complete.
Spec. No.: As directed by Engineer in charge
12 / 9 Providing and laying perforated PVC 160 mm dia Square 835.00 210.00
BDJ pipe in proper line,level& slope including necessary Meter
fitting etc. complete. material etc complete.**
Spec. No.: As directed by Engineer in charge
3a / 11 Providing internal cement plaster 20mm thick in two Square 251.00 156.00
BDL 4 coats in cement mortar 1:5 without neeru finish, to Meter
concrete, brick surface, in all positions including
scaffolding and curing complete
Spec. No.: Bd.L.4 Page No. 368
3b / 11 Providing internal cement plaster 20mm thick in two Square 261.00 156.00
BDL 4A coats in cement mortar 1:4 without neeru finish, to Meter
concrete, brick surface, in all positions including
scaffolding and curing complete.
Spec. No.: Bd.L.4 Page No. 368
3c / 11 Providing internal cement plaster 20mm. thick in two Square 284.00 156.00
BDL 4B coats in cement mortar 1:3 without neeru finish, to Meter
concrete, brick surface, in all positions including
scaffolding and curing complete.
Spec. No.: Bd.L.4 Page No. 368
4 / 11 Providing internal cement plaster 25mm thick in two Square 311.00 178.00
BDL 5 coats in cement mortar 1:4 without neeru finish, to Meter
concrete, brick or stone surfaces, in all positions
including scaffolding and curing complete.
Spec. No.: Bd.L.5 Page No. 368
6 / 11 Providing rough cast cement plaster externally in two Square 336.00 191.00
BDL 8 coats to concrete, brick or stone masonry surfaces in Meter
all positions with base coat of 12 to 15 mm thick in
C.M. 1:4 and rough cast treatment 12mm thick in
proportion 1:1 1/2:3 including scaffolding and
fourteen days curing complete.
Spec. No.: Bd.L.8 Page No. 370
7 / 11 Providing rough cast cement plaster externally in two Square 347.00 191.00
BDL 9 coats with coloured cement finish to concrete/ brick/ Meter
stone masonry surfaces in all positions with base
coat 12 to 15 mm. thick in C.M. 1:4 using gray
cement and rough cast treatment 12 mm thick in
proportion of 1:1 1/2:3 using colour pigment including
scaffolding and fourteen days curing etc. completed
Spec. No.: Bd.L.9, Page No.370
9a / 11 Providing flush grooved pointing with cement mortar Square 82.00 63.00
BDL 15A 1:3 for brick work including scaffolding and curing Meter
complete.
Spec. No.: Bd. L.15 Page No. 372
9b / 11 Providing flush grooved pointing with cement mortar Square 89.00 63.00
BDL 15B 1:3 for stone masonry work including scaffolding and Meter
curing complete.
Spec. No.: Bd. L.15 Page No. 372
10 / 11 Providing tuck pointing with cement mortar 1:3 for Square 89.00 63.00
BDL 16 stone masonry including scaffolding and curing Meter
complete.
Spec. No.: Bd. L. 16 Page No. 373
11 / 11 Providing weathered pointing with cement mortar 1:3 Square 86.00 62.00
BDL 17 for stone masonary including scaffolding and curing Meter
complete.
Spec. No.: Bd. L. 17 Page No. 373
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
12 / 11 Providing vee pointing with cement mortar 1:3 for Square 81.00 63.00
BDL 18 stone masonry including scaffolding and curing Meter
complete
Spec. No.: Bd. L. 18 Page No. 373
13 / 11 Providing fine cement finish 1.5 mm thick over green Square 48.00 32.00
BDL plaster surface including scaffolding curing etc. Meter
complete.
Spec. No.: As directed by Engineer in charge.
16 / 11 Providing and fixing chicken mesh jali (24 gauge) at Square 72.00 21.00
BDL the junction of 2 different surfaces of different Meter
material component at the time of plastering to
prevent cracking in plaster surface as and where
directed at all floors with all leads and lifts etc.
complete.
Spec. No.: As directed by Engineer in Charge:
17 / 11 Providing and applying plaster with plaster of paris in Square 57.00 31.00
BDL 6mm thickness to previously plaster surface in all Meter
position including preparing the surface scaffolding
etc. complete.
Spec. No.: As directed by Engineer in Charge.
18 / 11 Providing and applying spray plaster made with finely Square 172.00 25.00
BDL graded marble and quartz in 2 mm thickness in two Meter
coats using putty knife or trowel to newly plaster fairly
even surface after minimum 30 days gap in all
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
20 / 11 Providing and applying plaster / wall punning with Square 330.00 164.00
BDL plaster of paris ( with plaster of paris material of Meter
Ambuja / Mor Chap or equivalent make ) in 10 to 13
millimeter thickness to previously plastered surface /
or on newly brick surface ( Excluding rough cast
plaster ) in all position including preparing and
Finishing the surface scaffolding etc.complete.**
Spec. No.: As directed by Engineer in charge.
22 / 11 Providing and applying Texture plaster with finishing Square 502.00 198.00
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
8 / 12 Providing and fixing black kadappa stone shelves Square 767.00 140.00
BDM 41 25mm. thick machine polished, extending the Meter
polish upto 20 cm width on lowerside, rounding
corners, laying in position jointing with bedding
cement mortar 1:4 proportion curing etc complete.
Spec. No.: Bd.M.29 Page No. 391
9 / 12 Providing and laying ceramic tiles of RAK/ Kajaria/ Square 797.00 245.00
BDM 12 Nitco/ Asian or equivalent make having size 30 cm Meter
x 30 cm confirming I.S.15622/2006 (group D II-
A)and 7 to 8 mm thick for flooring in required
position laid on a bed of 1:4 cement mortar
including cement float, filling joint with white/colour
cement slurry cleaning curing complete.
Spec. No.: Bd.M.12 Page No. 385.
10a / 12 Providing and laying ceramic tiles of RAK/Kajaria / Square 842.00 223.00
BDM 13 Nitco /Asian or equivalent make having size 30 Meter
cm. x 30 cm. for dado and skirting in required
position with readymade adhesive mortar of
approved quality on plaster of 1:2 cement mortar
including joint filling with white/ colour cement
slurry cleaning curing complete.
Spec. No.: Bd.M.13 Page No. 386.
10b / 12 Providing and laying ceramic tiles of RAK/ Kajaria / Square 943.00 414.00
BDM 13 Nitco /Asian or equivalent make having size 30 Meter
cm. x 45 cm. for dado and skirting in required
position with readymade adhesive mortar of
approved quality on plaster of 1:2 cement mortar
including joint filling with white/ colour cement
slurry cleaning curing complete.
Spec. No.: Bd.M.13 Page No. 386.
10c / 12 Providing and laying ceramic tiles of RAK/ Kajaria / Square 1028.00 414.00
BDM 13 Nitco /Asian or equivalent make having size 30 Meter
cm. x 60 cm. for dado and skirting in required
position with readymade adhesive mortar of
approved quality on plaster of 1:2 cement mortar
including joint filling with white/ colour cement
slurry cleaning curing complete.
Spec. No.: Bd.M.13 Page No. 386.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
11a / 12 Providing Mirror polishing to Kota Stone including Square 443.00 61.00
BDM using all necessary stones and equipments Meter
cleaning, washing etc. complete.for Flooring
Spec. No.: As directed by Engineer in charge.
Note –Prior approval of S.E. will be necessary
11b / 12 Providing Mirror polishing to Kota Stone including Running 46.00 14.00
BDM using all necessary stones and equipments Meter
cleaning, washing etc. complete.for Skirting
Spec. No.: As directed by Engineer in charge.
Note –Prior approval of S.E. will be necessary
12 / 12 Providing and laying in situ cement concrete M20 Square 638.00 71.00
BDM with tremix treatment for 100 mm thickness for Meter
flooring with groove cutting of 4mm wide and
20mm deep with necessary refilling with bitumen
etc. complete.
Spec. No.: As directed by Engineer in charge
12 a / 12 Providing and laying in situ cement concrete M30 Square 1230.00 125.00
BDM with tremix treatment for 200 mm thickness for Meter
flooring with groove cutting of 4mm wide and
20mm deep with necessary refilling with bitumen
etc. complete.
Spec. No.: As directed by Engineer in charge
15 / 12 Providing and fixing machine cut machine polished Square 3697.00 232.00
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
16a / 12 Providing and fixing machine cut mirror polished 18 Square 3797.00 356.00
BDM 35 mm to 20 mm thick telephone black granite / Amba Meter
White / Cat bary brown / RBI red / Ocean Brown
granite stone partition with rounding the edges etc.
complete** . A) Both side polish
Spec. No.: Bd.M.35 /Page No.393
16b / 12 Providing and fixing machine cut mirror polished 18 Square 3780.00 356.00
BDM 35 mm to 20 mm thick telephone black / Amba White / Meter
Cat bary brown / RBI red / Ocean Brown granite
stone partition with rounding the edges etc.
complete.**
B) One side polish
Spec. No.: Bd.M.35 /Page No.393
17 / 12 Providing and preparing kitchen otta made up from Square 2508.00 705.00
BDM 35 30 mm thick and 75 cm. wide one side polished Meter
kadppa top 75 cm. wide one side polished
kadappa top 75 cm high vertical support for
kadppa at 1 m. c/c of 25 mm thick both side
polished kadappa middle shelf and bottom of 20
mm thick one side polished kadappa with facia
patti of 20 x 50 mm kadappa including all material
labour cutting fixing with cement mortar and
araldite curing polished and cleaning etc.
complete.**
Spec. No.: Bd.M.35C / Page No. 393
18 / 12 Providing and fixing 1.5 mm thick polyvenyl venyl Square 477.00 8.00
BDM 35 chloride flooring including leveling the base with Meter
white cement including pasting with appropriate
material cleaning the surface etc. complete.**
Spec. No.: Bd.M.35C / Page No. 393
19A a / 12 Providing and laying vitrified mirror / glossy finish Square 852.00 100.00
BDM 12 tiles decorative type RAK/ Kajaria/ Nitco/ Asian or Meter
equivalent make having size 590 mm to 605 mm x
590 mm to 605 mm of 8 to 10 mm thickness and
confirming to IS. 15622-2006 ( group Bla) of
approved make, shade and pattern for flooring in
required position laid on a bed of 1:4 cement
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
19A b / 12 Providing and laying vitrified mirror / glossy finish Square 1012.00 158.00
BDM 12 tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent Meter
make having size 590 mm to 605 mm x 590 mm to
605 mm of 8 to 10 mm thickness and confirming to
IS. 15622-2006 ( group Bla) of approved make,
shade and pattern for flooring in required position
laid on a bed of 1:4 cement mortar including neat
cement float, filling joints, curing and clearing etc.
complete.^**
b) Skirting
Spec. No.: Bd.M. 12 Page No.385
19B a / 12 Providing and laying vitrified matt fininsh tiles of Square 1150.00 100.00
BDM 12 RAK/ Kajaria/ Nitco/ Asian or equivalent make Meter
having size 590 mm to 605 mm x to 605 mm of 8
to 10 mm thickness and confirming IS. 15622-2006
(Group Bla) of approved make, shade and pattern
for flooring in required position laid on a bed of 1:4
cement morar including neat cement float, filling
joints, curing and cleaning complete^.**
a) flooring
Spec. No.: Bd.M.12 Page No. 385
19B b / 12 Providing and laying vitrified matt finish tiles of Square 1316.00 158.00
BDM 12 RAK/ Kajaria/ Nitco/ Asian or equivalent make Meter
having size 590 mm to 605 mm x to 605 mm of 8
to 10 mm thickness and confirming IS. 15622-2006
(Group Bla) of approved make, shade and pattern
for flooring in required position laid on a bed of 1:4
cement mortar including neat cement float, filling
joints, curing and cleaning complete.^**
b) Skirting
Spec. No.: Bd.M.12 Page No. 385
19C a / 12 Providing and laying vitrified rustic matt stone finish Square 1435.00 100.00
BDM 12 tiles of RAK/Kajaria/ Nitco/ Asian or equivalent Meter
make having size 590 mm to 605 mm x 590 mm to
605 mm of 8 to 10mm thickness and confirming to
IS. 15622-2006 (Group Bla) of approved make,
shade and pattern for flooring in required position
laid on a bed of 1:4 cement mortar including neat
cement float, filling joints, curing and cleaning
complete.**
a) Flooring
Spec. No.: Bd.M.12 Page No. 385
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
19C b / 12 Providing and laying vitrified rustic matt stone finish Square 1582.00 158.00
BDM 12 tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent Meter
make having size 590 mm to 605 mm x 590 mm to
605 mm to 8 to 10mm thickness and confirming to
IS. 15622-2006 (Group Bla) of approved make,
shade and pattern for flooring in required position
laid on a bed of 1:4 cement mortar including neat
cement float, filling joints, curing and cleaning.
complete.^**
b) Skirting
Spec. No.: Bd.M.12 Page No. 385
19D a / 12 Providing and laying vitrified stone effect finish tiles Square 1765.00 100.00
BDM 12 of RAK/Kajaria/ Nitco/ Asian or equivalent make Meter
having size 590 to 605 mm x 590 to 605 mm of 8
to 10 mm thickness and confirming to IS. 15622-
2006 (Group Bla) of approved make, shade and
pattern for flooring in required position laid on a
bed of 1:4 cement mortar including required
position laid on a bed of 1:4 cement mortar
including neat cement float, filling joints, curing and
cleaning etc. complete^.**
a) Flooring
Spec. No.: Bd.M. 12 Page No. 385
19D b / 12 Providing and laying vitrified stone effect finish tiles Square 1904.00 158.00
BDM 12 of RAK/ Kajaria/ Nitco/ Asian or equivalent make Meter
having size 590 to 605 mm x 590 to 605 mm of 8
to 10 mm thickness and confirming to IS. 15622-
2006 (Group Bla) of approved make, shade and
pattern for flooring in required position laid on a
bed of 1:4 cement mortar including required
position laid on a bed of 1:4 cement
mortarincluding neat cement float, filling joints,
curign and cleaning etc. complete.^**
b) Skirting
Spec. No.: Bd.M. 12 Page No. 385
21A i / 12 Providing and fixing heavy duty inter locking Square 513.00 82.00
BDM concrete Gray paving blocks of 60 mm thickness of Meter
having a strength of 300 kg/Sq.cm. of approved
quality and shape on a bed of crushed sand of 25
to 30 mm thick including skirting joints and
cleaning etc. complete.**
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
21A ii / 12 Providing and fixing heavy duty inter locking Square 622.00 82.00
BDM concrete Gray paving blocks of 80 mm thickness of Meter
having a strength of 300 kg/Sq.cm. of approved
quality and shape on a bed of crushed sand of 25
to 30 mm thick including skirting joints and
cleaning etc. complete.**
Spec. No.: A directed by Engineer in charge
21B i / 12 Providing and fixing heavy duty inter locking Square 568.00 82.00
BDM concrete Coloured paving blocks of 60 mm Meter
thickness of having a strength of 300 kg/Sq.cm. of
approved quality and shape on a bed of crushed
sand of 25 to 30 mm thick including skirting joints
and cleaning etc. complete **
Spec. No.: A directed by Engineer in charge
21B ii / 12 Providing and fixing heavy duty inter locking Square 655.00 82.00
BDM concrete Coloured paving blocks of 80 mm Meter
thickness of having a strength of 300 kg/Sq.cm. of
approved quality and shape on a bed of crushed
sand of 25 to 30 mm thick including skirting joints
and cleaning etc. complete **
Spec. No.: As directed by Engineer in charge
22a / 12 Providing and fixing heavy duty inter locking Square 793.00 82.00
BDM 12 concrete RUBBER MOULD GLOSSY PAVING Meter
BLOCKS of 60 millimeter thickness of having a
strength of 400 Kg/sq.m of approved quality and
shape on a bed of crushed sand of 25 to 30
millimeter thick including striking joints and
cleaning etc. complete.**
(using 100% crushed sand)
Spec. No.: As directed by Engineer in-charge.
22b / 12 Providing and fixing heavy duty inter locking Square 859.00 82.00
BDM concrete Rubber mould glossy paving blocks of 80 Meter
mm thickness of having a strength of 400
kg/Sq.cm. of approved quality and shape on a bed
of crushed sand of 25 to 30 mm thick including
skirting joints and cleaning etc. complete **
Spec. No.: As directed by Engineer in-charge.
23a / 12 Providing and fixing heavy duty inter locking Square 412.00 82.00
BDM concrete Gray paving blocks of 40 mm thickness of Meter
having a strength of 200 kg/Sq.cm. of approved
quality and shape on a bed of crushed sand of 25
to 30 mm thick including skirting joints and
cleaning etc. complete **
Spec. No.: As directed by Engineer in charge
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
23b / 12 Providing and fixing heavy duty inter locking Square 439.00 82.00
BDM concrete Coloured paving blocks of 40 mm Meter
thickness of having a strength of 200 kg/Sq.cm. of
approved quality and shape on a bed of crushed
sand of 25 to 30 mm thick including skirting joints
and cleaning etc. complete **
Spec. No.: As directed by Engineer in charge
26a / 12 Providing and laying Vitrified mirror/glossy finish Square 889.00 93.00
BDM 12 RAK/ Kajaria /Nitco / Aisan / Coral Or equivalent Meter
make having decorative type of size 590 millimeter
to 605 millimeter x 590 millimeter to 605 millimeter
of 8 to 10 millimeter thickness (on a existing
flooring) with bonding chemical and confirming to
IS 15622-2006 (Group Bla) of approved make
shade and pattern for flooring in required position
laid on a bed of bonding chemical filling joints
curing and cleaning etc complete.**
Spec. No.: Bd. M-12 page No. 385
26b / 12 Providing and laying Vitrified MATT finish RAK/ Square 1192.00 93.00
BDM 12 Kajaria /Nitco / Aisan / Coral Or equivalent make Meter
having decorative type of size 590 millimeter to
605 millimeter x 590 millimeter to 605 millimeter of
8 to 10 millimeter thickness (on a existing flooring)
with bonding chemical and confirming to IS 15622-
2006 (Group Bla) of approved make shade and
pattern for flooring in required position laid on a
bed of bonding chemical filling joints curing and
cleaning etc complete.**
Spec. No.: Bd. M-12 page No. 385
26c / 12 Providing and laying Vitrified RUSTIC MATT Square 1508.00 93.00
BDM 12 STONE finish RAK/ Kajaria /Nitco / Aisan / Coral Meter
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
26d / 12 Providing and laying Vitrified STONE EFFECT Square 1785.00 93.00
BDM 12 FINISH RAK/ Kajaria /Nitco / Aisan / Coral Or Meter
equivalent make having decorative type tiles of
size 590 millimeter to 605 millimeter x 590
millimeter to 605 millimeter of 8 to 10 millimeter
thickness (on a existing flooring) with bonding
chemical and confirming to IS 15622-2006 (Group
Bla) of approved make shade and pattern for
flooring in required position laid on a bed of
bonding chemical filling joints curing and cleaning
etc complete.**
Spec. No.: Bd. M-12 page No. 385
29 / 12 Providing and laying telephone black / Amba White Square 3812.00 459.00
BDM / Cadburybrown / RBI red / Ocean Brown granite Meter
stone of 18 to 20 mm thick for door frame/ dado/
window boxing etc. On C.M. 1:6 including filling
joints with polymer base filler nosing the sharp
edges wherever necessary, curing, etc. complete.
**
Specifications: Bd. M. 12
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
33 / 12 Providing and laying Polished Kota stone flooring Square 1456.00 444.00
BDM With Hand-Cut Polished Kota Stones 25mm to Meter
30mm thick and required width in plain/diamond
pattern on bed of 1:6 Cement mortar including
cement float, filling joints with neat cement slurry,
curing, cleaning and Mirror Polishing complete.**
Spec. No.: Bd. M-3 page No. 380
^Note- Water absorption for item No,19 should
not exceed 0.05%
**Note** – For item no. 14 to 33 Prior approval
of S.E. will be necessary..
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
1b / 13 Providing and applying boiled linseed oil in two Square 19.00 12.00
BDN 1.1 coats to the new wood work, including knotting, Meter
preparing the surface, scaffolding etc. complete as
directed.
Spec. No.: Bd.N.1.1 Page No. 399
2a / 13 Providing and applying Wax polishing to the new Square 24.00 20.00
BDN 1.2 wood work including knotting, preparing the Meter
surface, scaffolding etc. complete as directed.
Spec. No.: Bd.N.1.2 Page No. 399
2b / 13 Providing and applying Wax polishing to the old Square 20.00 13.00
BDN 1.2 wood work including knotting, preparing the Meter
surface, scaffolding etc. complete as directed.
Spec. No.: Bd. N. 1.2 Page No. 399
3b / 13 Providing & applying french polishing to new wood Square 106.00 76.00
BDN 1.3 work, for required finishing including. knotting, Meter
preparing the surfaces, scaffolding etc. complete
as directed.
Spec. No.: Bd.N.1.3 Page No. 399
2 / 14 Providing and applying one coat of lead/zinc base Square 27.00 5.00
BDO 2 oil paint/ bituminious paint of approved colour and Meter
shade to old wood work previously painted and
fiber boards including if necessary scaffolding,
preparing surface excluding primer coat complete.
Spec. No.: Bd.0.2 Page No. 404
3 / 14 Providing and applying two coats of lead/zinc base Square 41.00 12.00
BDO 2A oil paint/bituminious paint of approved colour and Meter
shade to old wood work and fiber boards
previously painted including if necessary
scaffolding, preparing the surface excluding
priming coat complete.
Spec. No.: Bd.0.2 Page No. 404
4 / 14 Providing & applying two coats of lead/zinc base oil Square 50.00 13.00
BDO 3 paint/ bituminious paint of approved colour to new Meter
structural steel work and iron work in buildings
including scaffolding if necessary, cleaning and
preparing the surface. (excluding primer coat).
Spec. No.: Bd.0.3 Page No. 404
5a / 14 Providing and applying one coat of aluminium paint Square 43.00 10.00
BDO 4 of approved make to new structural steel work in Meter
building and workshop including scaffolding if
necessary, cleaning and preparing surface
(excluding primer coat) complete.
Spec. No.: Bd.0.4 Page No. 405
complete.
Spec. No.: Bd.0.5 Page No. 405
7a / 14 Providing and applying one coat of flat oil paint of Square 32.00 10.00
BDO 6 approved colour to the old structural steel work and Meter
iron work previously painted in building including
scaffolding, if necessary, cleaning and preparing
surface(excluding primer coat) complete.
Spec. No.: Bd.0.6 Page No. 406
7b / 14 Providing and applying 2 coats of flat oil paint of Square 46.00 17.00
BDO 6A approved colour to the old structural steel work and Meter
iron work previously painted in building including
scaffolding, if necessary, cleaning and preparing
the surface (excluding primer coat) complete.
Spec. No.: Bd.0.6 Page No. 406
8a / 14 Providing and applying one coat of flat oil paint of Square 30.00 10.00
BDO 7 approved colour and shade to internal / external Meter
plastered surfaces including scaffolding if
necessary, cleaning and preparing the surface
(excluding primer coat) complete.
Spec. No.: Bd.0.7 Page No. 406
8b / 14 Providing and applying 2 coats of flat oil paint of Square 47.00 16.00
BDO 7A approved colour and shade to internal / external Meter
plastered surfaces including scaffolding if
necessary, cleaning and preparing the surface
(excluding primer coat) complete.
Spec. No.: Bd.0.7 Page No. 406
9 / 14 Providing and applying two coats of water proof Square 38.00 17.00
BDO 8 cement paint of approved manufacture and of Meter
approved colour to the plastered surfaces including
scaffolding if necessary, cleaning and preparing
the surface, watering for two days complete.
Spec. No.: Bd.0.8 Page No. 406
10 / 14 Removing old paint from steel and other metal Square 8.00 8.00
BDO 8B surfaces and making the surfaces even with hand Meter
scrapping, scaffolding etc. complete.
Spec. No.: As directed by Engineer in charge.
11 / 14 Providing and applying priming coat over new Square 16.00 4.00
BDO 8C wood and wood based surfaces, including Meter
preparing the surface by thoroughly cleaning oil,
grease, dirt and other foreign matter, sand
papering and knotting, scaffolding etc. complete.
Spec. No.: As directed by Engineer in charge.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
12 / 14 Providing and applying priming coat over new/old Square 15.00 7.00
BDO 8D steel and other metal surfaces including preparing Meter
the surface by thoroughly cleaning oil, grease, dirt
and other foreign matter and scoured with wire
brushes, fine steel wool, scrappers and sand
paper, scaffolding etc. complete.
Spec. No.: As directed by En-gineer in charge.
14 / 14 Providing and applying one coat of seal cement Square 10.00 5.00
BDO 8F primer of approved manufacture and shed Meter
including scaffolding preparing the surface by
cleaning dirt and other foreign matters, scrapping if
necessary including scaffolding etc. complete.
Spec. No.: As directed by Engineer in charge.
15 / 14 Providing and applying pearl/ luster finish paint of Square 193.00 83.00
BDO approved colour and shade to the existing plaster Meter
surface including scaffolding, preparing the
surface, applying the acrylic wall putti etc.
complete.
Spec. No.: As directed by Engineer in charge.
17 / 14 Providing and applying two coats of appex Appex Square 143.00 69.00
BDO Ace white exterior paint of approved manufacture Meter
and of approved colour to the plastered surfaces
including cleaning ,preparing the plaster surface
,applying primer coat ,scaffolding if necessary ,
and watering the surface for two days complete
Spec. No.: As directed by Engineer in charge.
18 / 14 Providing and applying two coats of exterior white Square 142.00 69.00
BDO weather shield paint of approved manufacture Meter
and of approved colour to the plastered surfaces
including cleaning ,preparing the plaster surface
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
8 / 15 Extra for washing and cleaning of decorated wall Square 2.00 1.00
BDP surfaces with soap, soda and water. Meter
Spec. No.: As directed by Engineer in charge.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
1b / 16 Providing and fixing Ghana teak wood planking 50 Square 4106.00 76.00
BDQ 1A mm thick for flooring plained on both sides, Meter
tongued and grooved including scaffolding, if
necessary, and one coat of primer complete.
Spec. No.: Bd.Q.1 Page No. 419
2 / 16 Providing and fixing Ghana teak wood joists and Cubic 91039.00 2231.00
BDQ 2 girders in timber floors of single, double or framed Meter
type including scaffolding if necessary, and one
coat of primer complete.
Spec. No.: Bd.Q.2 Page No. 420
4 / 16 Providing and fixing Ghana teak wood plank Square 1842.00 109.00
BDQ 3 ceiling 20 mm thick tongued and grooved including Meter
iron screws, scaffolding, if necessary, including one
primer coat on under side and one coat of coal tar
on upper side complete.
Spec. No.: Bd.Q.3 Page No. 421
5 / 16 Providing and fixing Ghana teak wood framed Cubic 98993.00 8050.00
BDQ 4 collar beam / king post / queen post truss, with all Meter
Iron work including scaffolding, if necessary, and
one coat of primer complete.
Spec. No.: Bd.Q.4, Page No. 422
6 / 16 Providing and fixing in jungle wood framed collar Cubic 48584.00 8137.00
BDQ 4A beam / king post / queen post truss, with all iron Meter
work including scaffolding, if necessary and primer
coat complete.
Spec. No.: Bd.Q.4, Page No. 422
7a / 16 Providing and fixing Ghana teak wood common Cubic 96511.00 7236.00
BDQ 5 rafters, purlins and purlin cleats, hip rafters, jack Meter
rafters, ridges, wall plates, post plates and posts
for roofing etc. including scaffolding, if necessary,
all iron work and one coat of primer complete.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
7b / 16 Providing and fixing jungle wood common rafters, Cubic 42969.00 7236.00
BDQ 5A purlins and purlin cleats, hip rafters, jack rafters, Meter
ridges, wall plates, post plates & posts for roofing,
etc. including scaffolding, if necessary all iron work
and one coat of primer complete.
Spec. No.: Bd.Q.5, Page No. 423
8 / 16 Providing and fixing Ghana teak wood hand rail of Running 693.00 228.00
BDQ 8 60 mm x 75 mm as per detailed drawings or as Meter
directed by the Engineer, including french
polishing, etc. complete. (Note : The work to be
executed on preapproval of Superintending
Engineer)
Spec. No.: Bd.Q.8, Page No. 425
10 / 16 Providing and fixing Ghana teak wood eaves Running 403.00 76.00
BDQ 19 boards 15 cm wide and 25 mm thick plain Meter
decorative type including scaffolding and painting
with two coats complete.
Spec. No.: Bd.Q. 19 Page No. 432
11 / 16 Providing and fixing seasoned and treated jungle Running 205.00 73.00
BDQ 19A wood of approved species eaves board 15 cm wide Meter
and 25 mm thick plain decorative type including
scaffolding and painting with two coats complete.
Spec. No.: Bd.Q. 19 Page No. 432
12 / 16 Providing and fixing Ghana Teak wood eaves plate Running 209.00 48.00
BDQ 20 of size 10cm wide and 20 mm thick including Meter
scaffolding and painting in two coats complete.
Spec. No.: Bd.Q.20 Page No. 432
13 / 16 Providing and fixing country teak wood barge Running 415.00 120.00
BDQ 21 board 22 cm wide and 20mm thick plain type Meter
including scaffolding and painting in two coats
complete.
Spec. No.: Bd.Q.21 Page No. 433
14 / 16 Providing and fixing seasoned and treated jungle Running 240.00 102.00
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
15 / 16 Providing and fixing shutter to wall cupboard made Square 1740.00 369.00
BDQ from 19 mm thick Teak particle board with Meter
approved coloured laminated face 1.5 mm thick
bonded with phenol formaldehyde synthetic resin
B.W.P. grade including lipping beading iron
oxidised fixtures and fastening and oil primer coat
etc. complete.(Excluding cupboard frame)
Spec. No.: As directed by Engineer in charge.
2 / 17 Providing and fixing Mangalore tiled roofing with Square 667.00 60.00
BDR 2 class "AA" tiles including securing the last course Meter
of tiles near the eaves with steel flat 40 mm x 3
mm and 1.22 mm wire fixing country teak wood
sloping battens of 25 x 12 mm teak wood
horizontal battens of 50mm x 25mm over the
slopping battens, all iron work and coal tarring the
battens complete (Excluding ridge & hip tiles)
Spec. No.: Bd.R.2, Page No. 450
3 / 17 Providing and fixing Mangalore tile ridge and hip Running 149.00 63.00
BDR 3 tiles of class "AA" including scaffolding if Meter
necessary, pointing with coloured cement mortar
and curing complete.
Spec. No.: Bd.R.3, Page No. 450
4a / 17 Providing and fixing plain zinc sheeting of 0.80 mm Square 760.00 79.00
BDR 5 thick (22 B.W.G.) over the ridge hip or valley to Meter
galvanized iron sheet roofing including all fastening
and bolt galvanised iror screws and bolts and lead
and bitumen washers complete.(Weight of 6.8
kg/sq.m.)
Spec. No.: Bd.R.5, Page No. 453
8 / 17 Providing and fixing valley gutter of 24 B.W.G. 0.63 Running 2184.00 171.00
BDR 10B mm thick G.I. sheet 120 cm wide with 20 mm thick Meter
teak wood planking underneath coal tarring etc.
complete.
Spec. No.: Bd. R. 10, Page No. 455
9 / 17 Providing and fixing glass tiles of Mangalore type Number 453.00 29.00
BDR 11 at required places in Mangalore tile roof including
scaffolding necessary.
Spec. No.: Bd. R. 11, Page No. 456
11 / 17 Providing and fixing false ceiling of plain asbestos Square 1020.00 122.00
BDR 16 cement sheets 4 mm thick with teak wood Meter
beadings 45 x 12 mm with frame work of teak
wood battens of size 70 x 60 mm at 1.00 M center
to center including scaffolding, if necessary, all iron
work and painting (visible surfaces) to A.C. sheet
and beading in two coats complete (excluding T.W.
runner to be paid separately). (only for repair
works)
Spec. No.: Bd.R.16, Page No. 460
13 / 17 Providing and fixing frame work of galvanised iron Square 625.00 289.00
BDR for suspended false ceiling which includes Meter
galvanised iron perimeter channels of size 27 mm
& 0.5 mm thick having one flange of 20 mm and
another of 30 mm along with perimeter of the
ceiling, fixing in brick wall / partition with the help of
rawal plugs and screws, suspending galvenised
iron intermediate channels of size 45 mm and 0.9
mm thick with two flanges of 15 mm each from the
soffit at 1200 mm centers with steel galvanised iron
hanger of width 25 mm x 0.5 mm fasteners, ceiling
section of 0.5 mm thickness having curved wedge
of 51.5 mm and two flanges of 26 mm each with
lips of 10.5 mm fixed to the intermediate channel
with the help of connecting clips and in direction
perpendicular to the intermediate channel at 450
mmcenters, 12.5 mm dry walls screws at 230
mmcenters; fixing screws mechanically either with
screw driver or drilling machine with suitable
attachmentetc. complete.
Spec. No.: As directed by Engineer in charge.
14 / 17 Providing and fixing false ceiling of teak wood Square 669.00 87.00
BDR 17 particle board half perforated sheet 12 mm thick Meter
including scaffolding, if necessary, all iron work
and two coats of oil painting to boards and beading
i.e. visible surface (excluding frame work and
runners)
Spec. No.: Bd. R. 17 Page No. 461
16 / 17 Providing and fixing false ceiling of 12mm thick Square 1449.00 311.00
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
17 / 17 Providing and fixing false ceiling of 15mm thick Square 1541.00 289.00
BDR Acoustic tubular Armstrong/ Everest/ AMS (0.60 x Meter
0.60 m.) boards of approved make, shape and
sizes as per drawings including powder coated G.I.
wall angle of 20mm x 20mmx 0.6 x 0.6mm size,
G.I. grid runners of size 15mm x 38mm at 600mm
center to center both ways and suspended using
G.I. 3mm wire including fixing using butterfly clips
and fasteners including transporting, scaffolding all
necessary labour and machinery, finishing etc.
complete.
Spec. No.: As directed by Engineer in charge.
18 / 17 Providing and fixing false ceiling of T.W. partical Square 1113.00 297.00
BDR 17 board half perforated sheets 12 mm thick with Meter
frame work of M.S. angle 40 x 40 x 5 mm and T of
size 40 x 40 x 6 mm at 60 cm center to center
including 12 mm dia. hangers, T.W. battens 50 x
25 mm and beading 25 x 15 mm thick scaffolding,
if necessary, all iron work and two coats of painting
to boards and beading i.e. visible surface.
Spec. No.: Bd. R. 17, Page No. 461
20 / 17 Providing and applying two coats of bitumen to roof Square 74.00 49.00
BDR on new dungaree cloth one coat on each side etc. Meter
complete as directed.
Spec. No.: As directed by Engineer in charge.
21 / 17 Providing and applying one coat of bitumen to roof Square 29.00 19.00
BDR (without cloth) including scaffolding etc. complete Meter
as directed.
Spec. No.: As directed by Engineer in charge.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
22 / 17 Removing and resetting Mangalore tiles from roof Square 39.00 39.00
BDR including refixing loose battens. Meter
Spec. No.: As directed by Engineer in charge.
23 / 17 Removing the tiles, battens and dungry cloth Square 29.00 29.00
BDR purlins, rafters and ridges etc. from roof, sorting out Meter
the serviceable and unserviceable materials and
stacking the same as and where directed in the
compound, scaffolding etc. complete.
Spec. No.: As directed by Engineer in charge
25 / 17 Removing and lowering the roof truss carefully Square 106.00 106.00
BDR without damaging the members and stacking as Meter
and where directed in the compound including
scaffolding etc. complete.
Spec. No.: As directed by Engineer in charge.
26 / 17 Removing R.S. girders of any size and span Metric 988.00 988.00
BDR lowering the same and stacking neatly wherever Tonne
directed in the compound scaffolding etc.
complete.
Spec. No.: As directed by Engineer in charge.
29 / 17 Providing and fixing sky light in R.C.C. roof Square 1005.00 50.00
BDR including frame made of M.S. angle 50 x 50 x 6 Meter
mm with hold fast, sheet glass 5 mm thick, Chicken
mesh 24 gauge with all accessories and required
fixtures and fastening fitting including painting etc.
complete.
Spec. No.: As directed by Engineer in charge.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
30 / 17 Providing and fixing 12 mm dia. mild steel bar upto Number 82.00 24.00
BDR 0.5 M. length for anchor rods with necessary
threading nuts and bolts etc complete
Spec. No.: As directed by Engineer in charge.
31 / 17 Providing fixing Mangalore tile roofing with class Square 571.00 68.00
BDR 3 AA tiles in cement mortar 1:4 on sloping slab Meter
including necessary scaffolding curing, finishing,
etc. complete.
Spec. No.: Bd. R. 3A., Page No. 449
33a / 17 Providing and fixing of colour coated Zinc alume( R Running 968.00 44.00
BDR ) AZ150 ( min 150 gms/sq.mt. total on each side ) Meter
profiled sheets for roofing. The feed material is
manufactured out of nominal 0.45mm Base Metal
Thickness ( BMT ) (0.5mm TCT ), Hi-strength steel
with min.550 MPa yield strength, metallic hot dip
coated wtih Aluminium-Zinc alloy (55%
aluminiumm 43.4% zinc 1.6% silicon) with
COLORBOND ( R ) steel quality super durable
polyster paint coat ( with inorganic pigment). The
paint shall have a total coating thickness of
nominal 35 um, comprising of nominal 25 um
exterior coat on top surface and nominal 10 um
reverse coat on back surface. Profile sheet shall
have nom. 950-1050 mm effective cover width and
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
33b / 17 Providing and fixing of colour coated Zinc Running 1032.00 44.00
BDR aluminium ( R ) AZ150 ( min 150 gms/sq.mt. total Meter
on each side ) profiled sheets for roofing. The feed
material is manufactured out of nominal 0.45mm
Base Metal Thickness ( BMT ) (0.5mm TCT ), Hi-
strength steel with min.550 MPa yield strength,
metallic hot dip coated with Aluminium-Zinc alloy
(55% aluminiumm 43.4% zinc 1.6% silicon) with
COLORBOND ( R ) steel quality super durable
polyster paint coat ( with inorganic pigment). The
paint shall have a total coating thickness of
nominal 35 um, comprising of nominal 25um
exterior coat on top surface and nominal 10 um
reverse coat on back surface. Profile sheet shall
have nom. 950-1050 mm effective cover width and
nominal 25-30 mm deep ribs with subtle square
fluting in the five pan at nominal 180-250 mm
center-to-center. The end rib shall be designed for
anti-capacity groove. & return leg. The feed
material should have coil manufacturers product
details marked a regular interval. including
fasteners with min. fastened with min. 25 um Zinc-
Tin alloy coated, Hex head, self-drilling screw etc.
complete. (weight of profile 4.52 kg/sqm) 601 mm
to 900 mm girth (Surface Width)
Spec. No.: As directed by Engineer in charge.
35 / 17 Providing and fixing PVC coloured Ridge tiles over Square 557.00 29.00
BDR UPVC roofing where required having size 113cm x Meter
41cm and height 9.5 cm for ridge including
fastening with self drilling screw having washers
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
1b / 18 Providing and fixing frame with / without ventilator Cubic 48850.00 16495.00
BDT of size as specified with non teak wood for doors Meter
and windows including chamfering, rounding,
rebating, iron holdfast of size 300mm x 40mm x
5mm with oil painting, etc. complete.
Spec. No.: As directed by Engineer in charge.
2 / 18 Providing and fixing the Ghana teak wood second Square 2392.00 677.00
BDT 4 class fully glazed openable fanlight rectangular in Meter
shape as per detailed drawing excluding the
frame,stainless steel fixtures and fastenings and
finishing the wood work with 3 coats of oil painting.
Spec. No.: Bd-T-4 Page No. 479
3 / 18 Providing and fixing Ghana teak wood double or Square 4885.00 1241.00
BDT 7 & 8 single leaf second class fully paneled door shutter Meter
with 35mm thick style and rail with 25 mm thick
panels with openable fan light as per detailed
drawings. excluding the door frame 60mm x
100mm stainless steel fixtures and fastening and
finishing the wood work with oil painting 3 coats.
Spec. No.: Bd-T-7 & 8 Page No. 481-82
4 / 18 Providing and fixing ghana teak wood single leaf Square 2772.00 703.00
BDT 11 paneled door shutter without fanlight and 25mm Meter
thick as per drawing consisting of Ghana T.W. top
rail size 100mm x 25mm and bottom lock rail
200mm x 25mm insert pannel 12 mm thick
commercial ply faced T.W. particle board with
phenol formaldehyde synthetic resin (Generally
confirming to ISI 3097) excluding frame, including
stainless steel fixture and fastening and T.W.
beading to junctions of paneled inserts and as
instructed by the Engineer in charge including 3
coats of oil painting etc. complete.
Spec. No.: As directed by Engineer in charge.
5 / 18 Providing and fixing single leaf paneled door Square 4099.00 1139.00
BDT 11 shutter without fanlight and shutter 35 mm thick as Meter
per drawing consisting of Ghana T.W. top rail size
100mm x 35 mm and bottom and lock rail 200mm x
35mm insert panel 12 mm thick commercial ply
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
6 / 18 Providing and fixing single or double leaf paneled Square 3036.00 621.00
BDT 11 door shutter excluding frame with glazed openable Meter
fanlight shutter 35 mm thick as per detailed
drawing consisting Ghana.T.W. vertical styles 100
mm x 35 mm and lock and bottom rail 200 mm x 35
mm and panels 12 mm thick both side commercial
ply faced particle board including stainless steel
fixtures and fastening and T.W. beading at
junctions of panel inserts and as instructed by the
Engineer in charge including 3 coats of oil painting
etc. complete.
Spec. No.: As directed by Engineer in charge.
7 / 18 Providing and fixing Ghana teak wood double or Square 4773.00 1235.00
BDT 12 single leaf paneled shutters, 35 mm thick style Meter
and rail and 25 mm thick panels without ventilator
as per detailed drawing excluding the door frame,
stainless steel fixtures and fastening and finishing
the wood work with oil painting 3 coats complete.
Spec. No.: Bd-T-11 & 12, Page No. 482-483
8 / 18 Providing and fixing solid core flush door shutter in Square 2105.00 315.00
BDT 34 single leaf 32 mm thick decorative type of exterior Meter
grade as per detailed drawings approved face
veneers 3 mm thick on both faces or as directed,
all necessary beads, mouldings and lipping,
wrought iron hold fasts, chromium plated fixtures
and fastenings, with brass mortise lock, chromium
plated handles on both sides, and finishing with
French Polish etc. complete.
Spec. No.: Bd-T-34, Page No. 499
9 / 18 Providing and fixing solid core flush door shutter Square 1472.00 315.00
BDT 36 commercial in single leaf 32 mm thick without Meter
ventilator commercial type of exterior grade as per
detailed drawings with wrought iron hold fast,
stainless steel fixtures and fastenings and handles
on both sides and finishing with oil painting 3 coats
complete.
Spec. No.: Bd-T-36, Page No. 500
10 / 18 Providing and fixing solid core flush door Square 1804.00 326.00
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
11 / 18 Providing and fixing Ghana teak wood single leaf Square 2703.00 299.00
BDT 39 door shutter with teak wood style and rail of 25 mm Meter
thick including fixing 50 mm x 25 mm size welded
mesh of 10 gauge as per detailed drawing or as
directed with stainless steel fixture and fastening
finishing with 3 coats of oil painting etc. complete.
Spec. No.: Bd-T-39, Page No. 500
12 / 18 Providing and fixing factory made paneled door Square 1497.00 205.00
BDT shutter in single leaf 35 mm thick style and rail Meter
without ventilator with Ghana T.W. panels 12 mm
thick including wrought iron hold fast and stainless
steel fixtures with oil painting 3 coats etc. complete.
Spec. No.: As directed by Engineer in charge.
13 / 18 Providing and fixing Ghana teak wood single leaf Square 3781.00 436.00
BDT paneled door shutters 35 mm thick style and rail Meter
and 19 mm thick Ghana T.W. panels as per
detailed drawing including wrought iron hold fast
stainless steel fixtures and fastening and three
coats of oil painting etc. complete.
Spec. No.: As directed by Engineer in charge.
14 / 18 Providing and fixing fully glazed double leaf Square 2391.00 596.00
BDT 42 window shutter with openable fanlight including Meter
Ghana teak wood 25 mm thick style and rails with
plain / obscured glass panels as per drawing or as
directed by the Engineer in charge with stainless
steel fixtures and fastening and finishing the wood
work with oil painting three coats etc. complete.
Spec. No.: Bd-T-42, Page No. 503
15 / 18 Providing and fixing Ghana Teak Wood window Square 2771.00 539.00
BDT 42 with double leaf half glazed and half paneled Meter
shutter with ventilator including wrought iron hold
fast, stainless steel fixtures and fastenings and
finishing the wood work with oil painting 3 coats
etc. complete.
Spec. No.: Bd-T-42, Page No. 503
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
16 / 18 Providing and fixing Ghana teak wood windows Square 3441.00 415.00
BDT 43 with double leaf 25 mm thick planked shutters Meter
without ventilators as per detailed drawings
including stainless steel fixtures and fastenings
and finishing the wood work with oil painting 3
coats etc. complete.
Spec. No.: Bd-T-43, Page No. 503
17 / 18 Providing and fixing ghana teak wood windows / Square 3945.00 494.00
BDT 43 ventilators with double leaf paneled shutters 25 Meter
mm thick without ventilators as per detailed
drawing including stainless steel fixtures and
fastenings and finishing the wood work with oil
painting 3 coats etc. complete.
Spec. No.: Bd-T-43, Page No. 503
18 / 18 Providing and fixing steel window of various sizes Square 2912.00 544.00
BDT 53 as per detailed drawing without hot dip zinc Meter
coating, without ventilators, including fabricating /
glazing with plain / obscured glass panels of
approved type and quality, iron oxidised fixtures
and fastenings, oil painting two coats complete.
Spec. No.: Bd-T-53, Page No. 509
19 / 18 Providing and fixing steel window of various sizes Square 3263.00 367.00
BDT 53 as per detailed drawing without hot dip zinc Meter
coating, without ventilators, including fabricating /
glazing with plain / obscured glass panels of
approved type and quality, iron oxidised fixtures
and fastenings, finishing with oil painting two coats
complete (with guard bars 12 mm square at 10 cm
c/c.)
Spec. No.: Bd-T-53, Page No. 509
20 / 18 Providing and fixing steel window C.R.C. sheet as Square 2520.00 416.00
BDT per I.S. 1513 : 1986. gauge sect. 65 x 40 x 25 mm Meter
shutter single sheet of 24 gauge single leaf joined
by fusion welding at appropriate points with vertical
grooves of 15 mm wide and 15 mm deep at a
distance of 45 mm. The first and last rib should be
60 mm away from vertical edge of the shutter. the
shutter shall be welded, with angle to from the
periphery of the shutter. At the center of the frame
there shall be angle welded to bifurcate the frame
into segments with two leaf shutter square 12 mm
square guard bars at 120 mm center with all
accessories
Spec. No.: As directed by Engineer in charge.
21a / 18 Providing and fixing rolling shutter fabricated from Square 3525.00 351.00
BDT 55 steel laths of minimum thickness 0.9 mm with lock Meter
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
21b / 18 Providing and fixing rolling shutter fabricated from Square 4727.00 391.00
BDT 55 steel laths of minimum thickness 0.9 mm with lock Meter
plate of 3.15 mm thickness reinforced with 35 x 35
x 5 mm angle section fitted with sliding bolts and
handles for both sides, deep M.S. channel section
of depth and thickness not less than 65 mm and
3.15 mm respectively with hold fast arrangements,
M.S. Bracket plate 300 x 300 x 3.15 mm minimum
size and shape with square bar, suspension shaft
of minimum 32 mm diameter, hood cover of M.S.
sheet not less than 0.9 mm thickness and of any
size at top and safety devices including mechanical
gear operation arrangement consisting of worm
gear wheels and worms of high grade cast iron or
mild steel and one coat of red lead primer etc.
complete. (I.S. 6248-1979) (With mechanical gear)
Spec. No.: Bd.T.55, Page No. 510
22 / 18 Providing and fixing collapsible steel gate in one / Square 2923.00 796.00
BDT 57 two leaves with hot rolled vertical channels of 18 x Meter
9 x 3 mm minimum size, crossings of M.S. flats of
size 18 x 5 mm T or E section for runner of
minimum 40 x 6 mm size for flange, M.S. flat for
top runner of minimum size 40 x 12 mm with roller
wheels confirming to grade F.G. 150 fitted with
snap headed rivets of minimum size 6 mm max.
spacing of vertical channels be 100 mm enclosed
gate position and clear space of 150 mm between
two sets of crossings with hold fasts, stoppers,
spaces, handles, locking arrangement and one
coat of red lead primer & oil painting etc. complete.
(I.S. 10521-1983).
Spec. No.: Bd.T.57, Page No. 511
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
24 / 18 Providing and fixing sheet glass of 24 oz. for all Square 583.00 56.00
BDS size including putty etc. complete. Meter
Spec. No.: Bd.S . Page No. 465 to 467
25 / 18 Providing and fixing steel ventilator fully glazed Square 2216.00 311.00
BDT 53 partly fixed as per detailed drawing without hot dip Meter
zinc coating including fabricating glazing with plain
/ obscured glass panes and approved type and
quality and iron oxidized fixtures and fastening oil
paint 2 coats etc. complete.
Spec. No.: Bd. T. 53, Page No. 509 & As directed
by Engineer in charge.
26 / 18 Providing and fixing steel ventilator fully glazed Square 3050.00 466.00
BDT 53 partly fixed as per detailed drawing with hot dip Meter
zinc coating including fabricating glazing with plain
/ obscured glass pans and approved type quality
and iron oxidized fixtures and fastening with guard
bars 12 mm square 10 cm c/c and oil painting 2
coats etc. complete.
Spec. No.: Bd. T. 53, Page No. 509 and As
directed by Engineer in charge.
27 / 18 Providing and fixing M.S. grill door 24 kg/sqm of Square 2212.00 719.00
BDT various size as per detailed drawings without hot Meter
dip coating, iron fixtures and fastenings and 3
coats of oil painting etc.
Spec. No.: As directed by Engineer in charge.
29a / 18 Providing and fixing steel frame of angle 50 x 50 x Square 1917.00 273.00
BDT 6 mm size for window with 16 mm with mild steel Meter
bars horizontally at 10 cm c/c for ventilator portion
and at 15 cm c/c for remaining portion with M.S.
flat of size 40 x 6 mm vertical at center including
iron hold fast boxes for fixing 40 x 6 mm vertical at
center including iron hold fast boxes for fixing
shutters including welding finishing painting etc.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
complete.
Spec. No.: As directed by Engineer in charge.
29b / 18 Providing and fixing steel frame of angle 40 x 40 x Square 1444.00 248.00
BDT 5 mm size for windows with 16 mm dia. mild steel Meter
bars horizontally at 10 cm c/c for ventilator portion
and 15 cm c/c for remaining portion with M.S. flat
of size 40 x 6 mm vertical at center including hold
fast & iron oxidized fixtures boxes for fixing 40 x 6
mm fixing shutters including welding finishing
painting etc. complete.
Spec. No.: As directed by Engineer in charge
30a / 18 Providing and fixing steel frame door of angle 50 x Square 971.00 220.00
BDT 50 x 6 mm with mild steel bars 16 mm dia. Meter
horizontally at 10mm c/c for ventilator portion
including iron hold fast boxes for fixing shutters
including welding, finishing, painting etc. complete.
Spec. No.: As directed by Engineer in charge.
30b / 18 Providing and fixing steel frame door of angle 40 x Square 881.00 220.00
BDT 40 x 5 mm with 16 mm dia. mild steel bars Meter
horizontally at 10cm c/c for ventilator portion
including iron hold fast for the fixing shutters
including welding, painting, finishing etc. complete.
Spec. No.: As directed by Engineer in charge.
31i / 18 Providing and fixing in position. (as per I.S.1868 / Square 4211.00 925.00
BDT 1982) Aluminium sliding window of two tracks with Meter
rectangular pipe having overall dimension 63.50 x
38.10 x 1.02 mm at weight 0.547 kg/Rmt. and
window frame bottom track section 61.85 x 31.75 x
1.20 mm at weight 0.695 kg/Rmt. Top and side
track section 61.85 x 31.75 x 1.30 mm at weight
0.659 kg/Rmt. The shutter should be of bearing
bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt.
Inter locking section 40 x 18 x 1.10 mm at weight
0.469 kg/Rmt. And handle section 40 x 18 x 1.25
mm at weight 0.417 kg/Rmt. and top section 40 x
18 x 1.25 mm at weight 0.417 kg/Rmt. As per
detailed drawings and as directed by Engineer in
charge with all necessary Aluminium sections
fixtures and fastenings such as roller bearing in
nylon casting and self locking catch fitted in vertical
section of shutter including 5 mm thick plain glass
with all required screws and nuts etc, complete.
with colour Anodising with box
Spec. No.: As directed by Engineer-in-charge.
31ii / 18 Providing and fixing in position. (as per I.S.1868 / Square 3523.00 925.00
BDT 1982) Aluminium sliding window of two tracks with Meter
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
31iii / 18 Providing and fixing in position. (as per I.S.1868 / Square 4801.00 925.00
BDT 1982) Aluminium sliding window of two tracks with Meter
rectangular pipe having overall dimension 63.50 x
38.10 x 1.02 mm at weight 0.547 kg/Rmt. and
window frame bottom track section 61.85 x 31.75 x
1.20 mm at weight 0.695 kg/Rmt. Top and side
track section 61.85 x 31.75 x 1.30 mm at weight
0.659 kg/Rmt. The shutter should be of bearing
bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt.
Inter locking section 40 x 18 x 1.10 mm at weight
0.469 kg/Rmt. And handle section 40 x 18 x 1.25
mm at weight 0.417 kg/Rmt. and top section 40 x
18 x 1.25 mm at weight 0.417 kg/Rmt. As per
detailed drawings and as directed by Engineer in
charge with all necessary Aluminium sections
fixtures and fastenings such as roller bearing in
nylon casting and self locking catch fitted in vertical
section of shutter including 5 mm thick plain glass
with all required screws and nuts etc, complete.
With powder coating with box .
Spec. No.: As directed by engineer-in-charge.
31iv / 18 Providing and fixing in position. (as per I.S.1868 / Square 3915.00 925.00
BDT 1982) Aluminium sliding window of two tracks with Meter
rectangular pipe having overall dimension 63.50 x
38.10 x 1.02 mm at weight 0.547 kg/Rmt. and
window frame bottom track section 61.85 x 31.75 x
1.20 mm at weight 0.695 kg/Rmt. Top and side
track section 61.85 x 31.75 x 1.30 mm at weight
0.659 kg/Rmt. The shutter should be of bearing
bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt.
Inter locking section 40 x 18 x 1.10 mm at weight
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
32i / 18 Providing and fixing in position (as per 1868 / Square 3647.00 1052.00
BDT 1982) Aluminium sliding window of three tracks Meter
with rectangular pipe 95 x 38.10 x 0.90 mm at
weight 0.637 kg/Rmt. with window frame bottom
track section 92 x 31.75 x 1.30 mm at weight 1.070
kg/Rmt.. Top and side track section 92 x 31.75 x
1.30 mm at weight 0.933 kg/Rmt. The shutter
should be of bearing bottom 40 x 18 x 1.25 mm at
weight 0.417 kg/Rmt. Inter locking section 40 x 18
x 1.10 mm at weight 0.469 kg/Rmt. and handle and
top section 40 x 18 x 1.25 mm at weight o.417
kg/Rmt. As per detailed drawings and as directed
by Engineer-in-charge with all necessary
Aluminium sections fixtures and fastenings such as
roller bearing in nylon casting and self locking
catch fitted in vertical section of shutter including 5
mm thick plain glass and aluminium mosquito net
shutter with stainless steel jail with all required
screws and nuts etc, complete. with colour
Anodising with box
Spec. No.: As directed by engineer-in-charge.
32ii / 18 Providing and fixing in position (as per 1868 / Square 3231.00 1158.00
BDT 1982) Aluminium sliding window of three tracks Meter
with rectangular pipe 95 x 38.10 x 0.90 mm at
weight 0.637 kg/Rmt. with window frame bottom
track section 92 x 31.75 x 1.30 mm at weight 1.070
kg/Rmt.. Top and side track section 92 x 31.75 x
1.30 mm at weight 0.933 kg/Rmt. The shutter
should be of bearing bottom 40 x 18 x 1.25 mm at
weight 0.417 kg/Rmt. Inter locking section 40 x 18
x 1.10 mm at weight 0.469 kg/Rmt. and handle and
top section 40 x 18 x 1.25 mm at weight o.417
kg/Rmt. As per detailed drawings and as directed
by Engineer-in-charge with all necessary
Aluminium sections fixtures and fastenings such as
roller bearing in nylon casting and self locking
catch fitted in vertical section of shutter including 5
mm thick plain glass and aluminium mosquito net
shutter with stainless steel jail with all required
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
32iii / 18 Providing and fixing in position (as per 1868 / Square 4360.00 1158.00
BDT 1982) Aluminium sliding window of three tracks Meter
with rectangular pipe 95 x 38.10 x 0.90 mm at
weight 0.637 kg/Rmt. with window frame bottom
track section 92 x 31.75 x 1.30 mm at weight 1.070
kg/Rmt.. Top and side track section 92 x 31.75 x
1.30 mm at weight 0.933 kg/Rmt. The shutter
should be of bearing bottom 40 x 18 x 1.25 mm at
weight 0.417 kg/Rmt. Inter locking section 40 x 18
x 1.10 mm at weight 0.469 kg/Rmt. and handle and
top section 40 x 18 x 1.25 mm at weight o.417
kg/Rmt. As per detailed drawings and as directed
by Engineer-in-charge with all necessary
Aluminium sections fixtures and fastenings such as
roller bearing in nylon casting and self locking
catch fitted in vertical section of shutter including 5
mm thick plain glass and aluminium mosquito net
shutter with stainless steel jail with all required
screws and nuts etc, completewith powder coating
with box
Spec. No.: As directed by engineer-in-charge.
32iv / 18 Providing and fixing in position (as per 1868 / Square 3498.00 1158.00
BDT 1982) Aluminium sliding window of three tracks Meter
with rectangular pipe 95 x 38.10 x 0.90 mm at
weight 0.637 kg/Rmt. with window frame bottom
track section 92 x 31.75 x 1.30 mm at weight 1.070
kg/Rmt.. Top and side track section 92 x 31.75 x
1.30 mm at weight 0.933 kg/Rmt. The shutter
should be of bearing bottom 40 x 18 x 1.25 mm at
weight 0.417 kg/Rmt. Inter locking section 40 x 18
x 1.10 mm at weight 0.469 kg/Rmt. and handle and
top section 40 x 18 x 1.25 mm at weight o.417
kg/Rmt. As per detailed drawings and as directed
by Engineer-in-charge with all necessary
Aluminium sections fixtures and fastenings such as
roller bearing in nylon casting and self locking
catch fitted in vertical section of shutter including 5
mm thick plain glass and aluminium mosquito net
shutter with stainless steel jail with all required
screws and nuts etc, complete. with powder
coating without box
Spec. No.: As directed by engineer-in-charge.
35 / 18 Providing and fixing cold rolled steel hollow door Square 849.00 160.00
BDT frame 105mm x 60mm for Meter
anysizes including hold fast hinges, tie members
with red oxide and gray paint etc. complete as per
I.S.I. specifications and code of practice prescribed
including anticorrosive treatment as directed by the
engineer.
Spec. No.: As directed by Engineer in charge.
37a / 18 Providing and fixing in position alluminium fixed Square 3213.00 414.00
BDT window fully glazed of any size as per detailed Meter
drawing and as directed by Engineer-in-charge
with all necessary alluminium sections including
necessary fixtures and fastening such as 5 mm
thick clear float glass etc. complete. a) Without
powder coating .
Spec. No.: As directed by Engineer in charge.
Note – While arriving at the rate of item weight
at 6.90 kg / Sqm is considered
37b / 18 Providing and fixing in position alluminium fixed Square 3590.00 414.00
BDT window fully glazed of any size as per detailed Meter
drawing and as directed by Engineer-in-charge
with all necessary alluminium sections including
necessary fixtures and fastening such as 5 mm
thick clear float glass etc. complete. b) With
powder coating
Spec. No.: As directed by Engineer in charge.
Note – While arriving at the rate of item weight
at 6.90 kg / Sqm is considered
38a / 18 Providing and fixing in position alluminium partly Square 3979.00 434.00
BDT openable and partly fixed window of any size as Meter
per detailed drawing and as directed by Engineer-
in-charge with all necessary alluminium sections
including necessary fixtures and fastening with 5
mm thick float glass etc. complete. a) Without
powder coating
Spec. No.: As directed by Engineer in charge.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
38b / 18 Providing and fixing in position alluminium partly Square 4177.00 434.00
BDT openable and partly fixed window of any size as Meter
per detailed drawing and as directed by Engineer-
in-charge with all necessary alluminium sections
including necessary fixtures and fastening with 5
mm thick float glass etc. complete. b) With powder
coating .
Spec. No.: As directed by Engineer in charge.
Note – While arriving at the rate of item weight
at 6.90 kg / Sqm is considered
39a / 18 Providing and fixing M-40 grade thick vibrated pull Running 658.00 169.00
BDT cast or similar type concrete frame with chamfer Meter
conforming to I.S. 6524-1983 having 6 mm dia.
bars 3 Nos. And stirrups @250 mm c/c and fixing
in wall with 6 Nos of hold fast of 12 mm dia bars
500 mm long including primer and oil painting etc,
complete) frame size 60 mm x 100 mm .
Spec. No.: As directed by engineer-in-charge.
39b / 18 Providing and fixing M-40 grade thick vibrated pull Running 692.00 169.00
BDT cast or similar type concrete frame with chamfer Meter
conforming to I.S. 6524-1983 having 6 mm dia bars
3 Nos. And strips @250 mm c/c and fixing in wall
with 6 Nos. of hold fast of 12 mm dia bars 500 mm
long including primer and oil painting etc,
complete) frame size 60 mm x 125 mm
Spec. No.: As directed by engineer-in-charge.
40a / 18 Providing and fixing fiber glass reinforced polyster Square 3111.00 227.00
BDT door shutter 30 mm thick as per IS 14856 (2000) Meter
(Reaffirmed 2006) without ventilator including
chromium plated fixtures and fastening with
chromium plated handles on both sides, etc
complete.
Spec. No.: As directed by engineer-in-charge.
40b / 18 Providing and fixing fiber glass reinforced polyster Square 4114.00 227.00
BDT door shutter 35 mm thick as per IS 14856 (2000) Meter
(Reaffirmed 2006) without ventilator including
chromium plated fixtures and fastening with
chromium plated handles on both sides, etc
complete.
Spec. No.: As directed by engineer-in-charge.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
42a / 18 Providing and fixing in position, Double shuttered Square 15460.00 4746.00
BDT aluminium extruded powder coated openable door Meter
of specified size with aluminium door frame of
powder coated section 101.60 x 44.75mm , 3.18
mm thick and shutter comprising of powder coated
section having bottom and lock rail of size 150 mm
x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45
mm x 3.00 mm thick , vertical style 47.62 x 44.45
mm, 3.00 mm thick and for shutter plain glass
panes 5 mm thick for top panels and 12mm thick
both side laminated phenol bonded particle board
panels for bottom panels etc. , I.S.I. mark , heavy
duty, Hydraulic floor spring of 150 kg capacity ,
having heavy duty concealed lock, necessary
beading, glazing clips, PVC gaskets, 250mm
length aluminium tower bolts, 150mm dia. pad
handle, etc. as per detailed design and drawing or
as directed by engineer in charge including all
materials , labours, and equipment etc.complete **
Spec. No.: As directed by Engineer in charge.
42b / 18 Providing and fixing in position, Single shuttered Square 11269.00 1436.00
BDT aluminium extruded powder coated openable door Meter
of overall size 0.90 m x 2.40 m with aluminium door
frame of powder coated section 101.60 x 44.75mm
, 3.18 mm thick and shutter comprising of powder
coated section having bottom and lock rail of size
150 mm x 44.5 mm x 3.00 mm thick top rails 47.62
x 44.45 mm x 3.00 mm thick , vertical style 47.62 x
44.45 mm, 3.00 mm thick and for shutter plain
glass panes 5 mm thick for top panels and 12mm
thick both side laminated phenol bonded particle
board panels for bottom panels etc. , I.S.I. mark ,
heavy duty, Hydraulic floor spring of 150 kg
capacity , having heavy duty concealed lock,
necessary beading, glazing clips, PVC gaskets,
250mm length tower bolts, 150mm diam. pad
handle, etc. as per detailed design and drawing or
as directed by engineer in charge including all
materials , labours, and equipment etc.Complete **
Spec. No.: As directed by Engineer in charge.
46 / 18 Providing and fixing Ghana teak wood partly Square 2179.00 329.00
BDT veneered and partly glazed partition with 75 mm x Meter
50 mm frame at 60 cm center and 9 mm thick
commercial ply on both sides, decorative veneer of
4 mm thick and plain glass 5 mm thick, including
French polishing etc. complete **
Spec. No.: As directed by Engineer in charge.
50 / 18 Providing and fixing fly proof mesh shutter to Square 2230.00 239.00
BDT ventilator/window using Ghana TW members of Meter
size 45 x 22 mm for frame work and 35 x 22 mm
for middle support and fixing fly proof mesh on it
and covering Ghana TW battens of size 20 x 10
mm including priming and two coats of oil painting
to the new wood and steel work and all labour
charges including all fixture and fastenings etc.
complete.
Spec. No.: As directed by Engineer in charge.
52 / 18 Providing and fixing aluminium grill diamond mesh Square 3764.00 691.00
BDT type DG-202 of 7.5 mm thick including fixing in Meter
position anodised aluminium frame section of 80 x
38 mm x 1.22 mm size box, cutting to the required
size with all wastage , labour, lead lift etc.
complete.**
Spec. No.: As directed by Engineer in charge.
53 / 18 Providing and fixing in position Mild steel fixed Square 1925.00 753.00
BDT staggered ( Z Type )Ventilator as per detailed Meter
drawing with hot deep zink coating including
fabricating with Mild steel 'Z 'Section of size 20mm
x 25 mm and 3 mm thick at weight 1.42
Kg/Rmt,with stainless steel mosquito net of 304
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
54 / 18 Providing and fixing in position anodised (as per IS Square 2992.00 614.00
BDT 1868/1982) Aluminium fixed staggered ( Z Type Meter
)Ventilator with aluminium rectangular pipe 63 mm
x 38.10 mm x 1.22 mm at weight 0.650 Kg/Rmt,
Aluminium angle of size 15 mm x 15 mm x 1
mm,aluminium channel of 9 mm sizes,
S.S.mosquito net of 304 Grade,4 mm thick float
glass per detailed drawing & as directed by
Engineer in charge etc.complete.
Spec. No.: As directed by Engineer Incharge
56 / 18 Providing & Fixing 32 mm thick One piece single Square 2682.00 826.00
BDT moulded puff ABSTRONE BUTADYNE STYRINE Meter
(ABS) Door shutter for internal use including toilets
made up of outer ABS sheet of 1.2 mm thick
having puff insulation of 35 to 40 Kg/Cum.density
and 10 mm dia.for steel bars 2 Nos., wooden block
to receive fixtures, having M.S. hinges 100 mm
length, M.S. handles 150 mm length and 10 mm
dia sliding door bolt etc. complete.**
Spec. No.: As directed by Engineer Incharge
1b / 19 Providing and fixing mild steel grill work for Square 1129.00 79.00
BDU 1A windows, ventilators, etc. 15 kg/sq.m as per Meter
drawing including fixtures necessary welding and
painting with one coat of anticorrosive paint and
two coats of oil painting complete.
Spec. No.: Bd.U.1 Page No. 537
2a / 19 Providing and fixing mild steel grill railing 20 Square 2163.00 131.00
BDU 2 kg/sq.m with Ghana teak wood hand rail of size Meter
75mm x 60 mm.and sill of 75mm.x 25 mm.and
newel posts for staircases, including fabricating,
fix-tures, erecting, painting the grill work with one
coat of anti-corrosive paint and two coats of oil
painting with approved colour and polishing the sill,
hand rail and the newel post with french polish.
Spec. No.: Bd.U.2 Page No. 537
2b / 19 Providing and fixing mild steel grill railing 15 Square 1909.00 137.00
BDU 2A kg/sq.m with Ghanateak wood hand rail of size Meter
75mm x 60 mm and sill of 75mm.x 25mm and
newel posts for staircases, including fabricating,
fixtures, erecting, painting the grill work with one
coat of anticorrosive paint and two coats of oil
painting with approved colours and polishing the
sill, hand rail and the newel post with french polish.
Spec. No.: Bd.U.2 Page No. 537
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
1b / 20 Providing and laying cast iron pipes of B class of Running 1118.00 94.00
BDV 1A 100mm diameter with sockets and spigot ends/ Meter
flanges and cast centrifugally/vertically including
specials, laying pipes and back filling the trench
complete including excavation.
Spec. No.: Bd.V.1 Page No. 547
1c / 20 Providing and laying cast iron pipes of B class of Running 1528.00 94.00
BDV 1B 150mm diameter with sockets and spiget ends/ Meter
flanges and cast centrifugally/ vertically including
specials, laying pipes and back filling the trench
complete including excavation.
Spec. No.: Bd.V.1 Page No. 547
2a / 20 Providing and making lead joints for 80mm diameter Number 345.00 20.00
BDV 2 cast iron pipe line including lead and testing.
Spec. No.: Bd.V.2 Page No. 549
2b / 20 Providing and making lead joints for 100mm Number 429.00 20.00
BDV 2A diameter cast iron pipes line including lead and
testing.
Spec. No.: Bd.V.2 Page No. 549
2c / 20 Providing and making lead joints for 150mm Number 489.00 20.00
BDV 2B diameter cast iron pipe line including lead and
testing
Spec. No.: Bd.V.2 Page No. 549
3a / 20 Providing and making flanged connection for the Number 91.00 34.00
BDV 3 80mm diameter cast iron pipe line including painting
rubber insertion, nuts and bolts etc. complete.
Spec. No.: Bd.V.3 Page No. 550
3b / 20 Providing and making flanged connection for the Number 96.00 41.00
BDV 3A 100mm diameter cast iron pipe line including
painting rubber insertion, nuts and bolts etc.
complete.
Spec. No.: Bd.V.3 Page No. 550
3c / 20 Providing and making flanged connection for the Number 133.00 51.00
BDV 3B 150mm diameter cast iron pipe line including
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
4h / 20 Providing & fixing on walls/ ceiling/ floors, 100 mm Running 1085.00 90.00
BDV 5 dia.heavy grade having embossed as ISI Mark Meter
galvanised iron pipes weight of 14.74 Kg/meter with
necessary fittings. & remaking good the demolished
portion and applying primer of anti-corrosive oil
paint 2 coats etc. complete.
Spec. No.: Bd.V.5 Page No. 551
6a / 20 Providing and fixing 15mm diameter water meter Number 1938.00 159.00
BDV 7 with non-return valve including strainer, sockets/
union nut including water meter box making locking
arrangement and lock. [Without chamber].
Spec. No.: Bd.V.7 Page No. 554
6b / 20 Providing and fixing 20mm diameter water meter Number 2717.00 159.00
BDV 7 with non-return valve including strainer, sockets/
union nut including water meter box making locking
arrangement and lock. [without chamber]
Spec. No.: Bd.V.7 Page No. 554
6c / 20 Providing and fixing 25mm diameter water meter Number 4302.00 159.00
BDV 7 with non-returnvalve including strainer, sockets/
union nut and including water meter box making
locking arrangement and lock. [Without chamber].
Spec. No.: Bd.V.7 Page No. 554
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
6d / 20 Providing and fixing 40mm diameter water meter Number 5243.00 159.00
BDV 7 with non-return valve including strainer, sockets/
union nut and including water meter box making
locking arrangements and lock. [Withoutchamber].
Spec. No.: Bd.V.7 Page No. 554
6e / 20 Providing and fixing 50mm diameter water meter Number 10825.00 159.00
BDV 7 with non-return valve including strainer, sockets/
union nut and including water meter box making
locking arrangement and lock. [without chamber]
Spec. No.: Bd.V.7 Page No. 554
6f / 20 Providing and fixing 80mm diameter water meter Number 12855.00 173.00
BDV 7 with non-return valve including strainer, sockets/
union nut and including water meter box making
locking arrangement and lock. [Without chamber].
Spec. No.: Bd.V.7 Page No. 554
6g / 20 Providing and fixing 100mm diameter water meter Number 17985.00 200.00
BDV 7 with non-return valve including strainer, sockets/
union nut and including water meter box making
locking arrangements and lock. [Without chamber].
Spec. No.: Bd.V.7 Page No. 554
7a / 20 Providing and fixing 15 mm dia. screw down bib/ Number 248.00 31.00
BDV 8 stop tap of brass including necessary socket union
nut complete.
Spec. No.: Bd.V.8 Page No. 554
7b / 20 Providing and fixing 20 mm dia. screw down bib/ Number 303.00 31.00
BDV 8 stop tap of brass including necessary socket union
nut complete.
Spec. No.: Bd.V.8 Page No. 554
7c / 20 Providing and fixing 25 mm dia. screw down bib/ Number 382.00 40.00
BDV 8 stop tap of brass including necessary socket union
nut complete.
Spec. No.: Bd.V.8 Page No. 554
8b / 20 Providing and fixing screw down for 20 mm dia. Number 321.00 38.00
BDV 9 wheeled stop tap of brass including necessary
sockets/union nut complete.
Spec. No.: Bd.V.9 Page No. 555
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
8c / 20 Providing and fixing screw down for 25 mm dia. Number 398.00 38.00
BDV 9 wheeled stop tap of brass including necessary
sockets/union nut complete
Spec. No.: Bd.V.9 Page No. 555
8d / 20 Providing and fixing screw down for 32 mm dia. Number 619.00 38.00
BDV 9 wheeled stop tap of brass including necessary
sockets/union nut complete.
Spec. No.: Bd.V.9 Page No. 555
8e / 20 Providing and fixing screw down for 40 mm dia. Number 694.00 38.00
BDV 9 wheeled stop tap of brass including necessary
sockets/union nut complete
Spec. No.: Bd.V.9 Page No. 555
8f / 20 Providing and fixing screw down for 50 mm dia. Number 749.00 40.00
BDV 9 wheeled stop tap of brass including necessary
sockets/ union nut complete.
Spec. No.: Bd.V.9 Page No. 555
8g / 20 Providing and fixing screw down for 65 mm dia. Number 840.00 42.00
BDV 9 wheeled stop tap of brass including necessary
sockets/union nut complete.
Spec. No.: Bd.V.9 Page No. 555
8h / 20 Providing & fixing screw down for 80 mm. dia. Number 895.00 47.00
BDV 9 wheeled stop tap of brass including necessary
sockets/union nut complete.
Spec. No.: Bd.V.9 Page No. 555
9 / 20 Providing and fixing 100 mm dia. chromium plated Number 201.00 40.00
BDV 12 brass showers rose to 15mm dia. supply pipe
including necessary bend and socket complete.
Spec. No.: Bd.V. 12 Page No. 556
10a / 20 Providing and fixing 15mm diameter concussion Number 230.00 59.00
BDV 14 push button type brass/gun metal self-closing tap
including necessary socket complete.
Spec. No.: Bd.V.14 Page No. 557
10b / 20 Providing and fixing 25mm diameter concussion Number 256.00 59.00
BDV 14 push button type brass/gun metal self-closing tap
including necessary socket complete
Spec. No.: Bd.V. 14 Page No. 557
11 / 20 Providing and fixing 45 cm wide mild steel ladder of Running 791.00 210.00
BDV 19 40mm x 6 mm mild steel flat stringers and steps of Meter
18 mm dia. mild steel bar for water tank including
fixing it in (1:2:4) M-15 cement concrete block 60cm
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
12a / 20 Providing and fixing White Glazed Earthenware full Number 6211.00 666.00
BDV 23 stall type Urinal with P.V.C. flushing cistern of 5
liters capacity with fitting, inlet pipes and stop tap,
brackets for fixing the cistern, 32 mm dia. P.V.C
flush pipe with fittings and flushing arrangement
including lead soil pipe, lead trap, soil pipe
connectionup to the outside face of the wall
Spec. No.: Bd.V.23 Page No. 562
12b / 20 Providing and fixing coloured glazed earthenware Number 6753.00 634.00
BDV 23 full stall type Urinal with P.V.C. flushing cistern of 5
liters capacity with fitting, inlet pipes and stop tap
brackets for fixing the cistern 32mm dia. P.V.C.
flush pipe with fittings and flushing arrangement
including lead soil pipe, lead trap soil pipe
connection up to the outside face of the wall.
Spec. No.: Bd.V.23 Page No. 562
13a / 20 Providing and fixing white glazed earthenware Number 3087.00 423.00
BDV 26 lipped flat back/corner type Urinal with PVC 5 liters
flushing cistern with fittings, inlet pipe with stop tap,
brackets for fixing the cistern, 32 mm diameter
P.V.C. flush pipe with fitting including lead soil pipe,
lead trap & soil pipe connection up to the outside
face of wall.
Spec. No.: Bd.V.26 Page No. 564
13b / 20 Providing and fixing coloured glazed earthenware Number 3243.00 423.00
BDV 26 lipped flat back/corner type urinal with PVC 5 liters
flushing cistern with fittings,capacity with fittings,
inlet pipe and stop tap, brackets for fixing the
cistern, P.V.C. flush pipe with fittings including lead
soil pipe, lead trap and soil pipe connection up to
the outside face of the wall.
Spec. No.: Bd.V.26 Page No. 564
14 / 20 Providing and laying 100 mm dia. half round white Running 150.00 45.00
BDV 29 glazed earthenware pipes in 1:5:10 cement Meter
concrete bedding including bends, etc. complete.
Spec. No.: Bd.V.29 Page No. 565
15A i / 20 Providing and fixing white glazed earthenware Number 2686.00 625.00
BDV 30 Wash Hand Basin of 55cm. x 40 cm. size including
cold water pillar tap/cold and hot water pillar tap
brackets, rubber plugs and brass chain, stop tap
and necessary pipe connections including P.V.C.
waste pipe and trap up to the outside face of the
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
wall.
Spec. No.: Bd.V.30 Page No. 565
15A ii / 20 Providing and fixing white glazed earthenware Number 2326.00 622.00
BDV 30 Wash Hand Basin of 45cm x 30cm size including
cold water pillar tap/cold and hot water pillar tap
brackets, rubber plugs and brass chain, stop tap
and necessary pipe connection including P.V.C.
waste pipe and trap up to the outside face of the
wall.
Spec. No.: Bd.V.30 Page No. 565
15A iii / 20 Providing and fixing white glazed earthenware Number 2729.00 622.00
BDV 30 Wash Hand Basin of 63cm x 45cm size including
cold water pillar tap/cold and hot water pillar tap
brackets, rubber plugs and brass chain, stop tap
and necessary pipe connection including P.V.C.
waste pipe and trap up to the outside face of the
wall.
Spec. No.: Bd.V.30 Page No. 565
15B i / 20 Providing and fixing coloured glazed earthenware Number 3000.00 623.00
BDV 30 Wash Hand Basin of 55cm x 40 cm size including
cold water pillar tap/cold and hot water pillar tap
brackets, rubber plugs and brass chain, stop tap
and necessary pipe connection including P.V.C.
waste pipe and trap up to the outside face of the
wall.
Spec. No.: Bd.V.30 Page No. 565
15B ii / 20 Providing and fixing coloured glazed earthenware Number 2871.00 623.00
BDV 30 Wash Hand Basin of 45 cm x 30 cm size including
cold water pillar tap/cold and hot water pillar tap
brackets, rubber plugs and brass chain, stop tap
and necessary pipe connection including P.V.C.
waste pipe and trap up to the outside face of the
wall.
Spec. No.: Bd.V.30 Page No. 565
15B iii / 20 Providing and fixing coloured glazed earthenware Number 3628.00 623.00
BDV 30 Wash Hand Basin of 63 cm x 45 cm size including
cold water pillar tap/cold and hot water pillar tap
brackets, rubber plugs and brass chain, stop tap
and necessary pipe connection including P.V.C.
waste pipe and trap up to the outside face of the
wall.
Spec. No.: Bd.V.30 Page No. 565
16 / 20 Providing and fixing white glazed earthenware sink Number 2979.00 690.00
BDV 31 600mm x 200mm x 450mm including all connection
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
17 / 20 Providing and fixing white glazed earthenware sink Number 2672.00 690.00
BDV 31 450mm x 200mm x 300mm including all connection
of the G.I. supply and lead waste pipes up to the
outside face of the wall, cold water chromium plated
screw down bib tap, rolled steel or C.I. brackets,
rubber plug with chain and stop tap complete.
Spec. No.: Bd.V.31 Page No.566
18a / 20 Providing and fixing 8cm C.I. Nahani Trap including Number 572.00 120.00
BDV 32 C.I. grating bend and piece of C.I. pipe upto the
outside face of the wall complete.
Spec. No.: Bd.V.32 Page No.567
18b / 20 Providing and fixing 10cm C.I. Nahani Trap Number 770.00 120.00
BDV 32 including C.I. grating bend and piece of C.I. pipe
upto the outside face of the wall complete.
Spec. No.: Bd.V.32 Page No.567
19 / 20 Providing and laying 100mm diameter half round Running 243.00 18.00
BDV 37 salt glazed stoneware pipes in brick masonry Meter
including fittings such as bends, tees, single
junction, necessary excavation and jointing
complete.
Spec. No.: Bd.V.37, Page No. 571
20 / 20 Providing and fixing 15cm x 10cm salt glazed Number 1121.00 106.00
BDV 38 stoneware gully trap in cement concrete 1:4:8
outside the building including cast iron grating in the
sink, connecting glazed stoneware pipe, brick
masonry chamber with cast iron lid and cast iron
grating for the gully trap.
Spec. No.: Bd.V.38, Page No. 572
21a / 20 Providing and laying 100 mm dia salt glazed Running 190.00 61.00
BDV 39 stoneware pipe including fittings such as bends, Meter
tees, single junction, double junctions laying,
jointing (including excavation and refilling the
trenches) complete.
Spec. No.: Bd.V.39, Page No. 573
21b / 20 Providing and laying for 150 mm dia salt glazed Running 280.00 61.00
BDV 39 stoneware pipe including fittings Such as bends, Meter
tees, single junction, double junctions laying,
jointing (including excavation and refilling the
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
trenches) complete.
Spec. No.: Bd.V.39, Page No. 573
21c / 20 Providing & laying for 225mm dia. salt glazed S.W. Running 352.00 72.00
BDV 39 Pipe including fitting such as bends, tees, single Meter
junction, double junctions laying, jointing (including
excavation & refilling the trenches) complete
Spec. No.: Bd.V.39, Page No. 573
22a / 20 Providing and laying concrete pipes of I.S.NP. class Running 472.00 65.00
BDV 41 of 100mm diameter in proper line, level and slope Meter
including necessary collars, excavation, laying,
fixing with collars in cement mortar 1:1 and refilling
the trench complete.
Spec. No.: Bd.V.41, Page No. 573
22b / 20 Providing and laying concrete pipes of I.S.NP. class Running 482.00 108.00
BDV 41 of 150mm diameter in proper line, level and slope Meter
including necessary collars, excavation, laying,
fixing with collars in cement mortar 1:1 and refilling
the trench complete.
Spec. No.: Bd.V.41, Page No. 573
22c / 20 Providing and laying concrete pipes of I.S.NP. class Running 531.00 108.00
BDV 41 of 225mm diameter in proper line, level and slope Meter
including necessary collars, excavation, laying,
fixing with collars in cement mortar 1:1 and refilling
the trench complete.
Spec. No.: Bd.V.41, Page No. 573
22d / 20 Providing and laying concrete pipes of I.S.NP. class Running 760.00 108.00
BDV 41 of 300mm diameter in proper line, level and slope Meter
including necessary collars, excavation, laying,
fixing with collars in cement mortar 1:1 and refilling
the trench complete.
Spec. No.: Bd.V.41, Page No. 573
23a / 20 Providing & constructing Brick Masonry Inspection Number 6138.00 808.00
BDV 43 Chamber 60cm x 45cm x 90cm including 1:4:8
cement concrete foundation 1:2:4 cement concrete
channels half round G.S.W. pipes, Brick Masonry,
plastering from inside and airtight C. I. lid 65 kg with
frame fixed in cement concrete etc. complete.
Spec. No.: Bd.V.43, Page No. 574
23b / 20 Providing & constructing Brick Masonry Inspection Number 6853.00 1018.00
BDV 43 Chamber 90cm x 45cm x 90cm including 1:4:8
cement concrete foundation 1:2:4 cement concrete
channels half round G.S.W.pipes, Brick Masonry,
plastering from inside and C.I. lid cover 75 kg with
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
24a / 20 Providing & constructing Brick Masonry Inspection Number 4505.00 798.00
BDV 43 Chamber 60cm x 45cm x 90cm including 1:4:8
cement concrete foundation 1:2:4 cement concrete
channels half round G.S.W. pipes, Brick Masonry,
plastering from inside and with frame fixed in
cement concrete etc. complete with R.C.C. Cover.
Spec. No.: Bd.V.43, Page No. 574
24b / 20 Providing & constructing Brick Masonry Inspection Number 5162.00 1068.00
BDV 43 Chamber 90cm x 45cm x 90cm including 1:4:8
cement concrete foundation 1:2:4 cement concrete
channels half round G.S.W.pipes, Brick Masonry,
plastering from inside and with frame fixed in
cement concrete with R.C.C. Cover.
Spec. No.: Bd.V.43, Page No. 574
27 / 20 Providing and fixing hume pipe septic tank 900mm Number 11205.00 806.00
BDV 45 diameter with vent pipe and cap including
necessary (including excavation and laying)
Spec. No.: Bd.V.45, Page No. 575
28 / 20 Providing soak pit of size 120cm x 120cm x 120cm Number 895.00 531.00
BDV 46 including excavating and filling with brick-bats.
Spec. No.: Bd.V.46, Page No. 576
29 / 20 Providing and fixing 450mm x 550mm size superior Number 637.00 70.00
BDV type Belgium mirror with 16mm dia. nickel plated
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
30a / 20 Providing, laying & fixing P.V.C. pipe of 15mm dia. Running 42.00 12.00
BDV 60 with fittings such as bends, tees, reducers, clamps, Meter
etc. including necessary excavation, trench filling
etc. complete.
Spec. No.: As directed by Engineer in charge.
30b / 20 Providing, laying & fixing P.V.C. pipe of 20mm dia. Running 51.00 13.00
BDV 60 with fittings such as bends, tees, reducers, clamps, Meter
etc. including necessary excavation, trench filling
etc. complete
Spec. No.: As directed by Engineer in charge.
30c / 20 Providing, laying & fixing P.V.C. pipe of 25mm dia. Running 69.00 13.00
BDV 60 with fittings such as bends, tees, reducers, clamps, Meter
etc. including necessary excavation, trench filling
etc. complete.
Spec. No.: As directed by Engineer in charge.
30d / 20 Providing, laying & fixing P.V.C. pipe of 32mm dia. Running 79.00 13.00
BDV 60 with fittings such as bends, tees, reducers, clamps, Meter
etc. including necessary excavation, trench filling
etc. complete.
Spec. No.: As directed by Engineer in charge.
30e / 20 Providing, laying & fixing P.V.C. pipe of 40mm dia. Running 112.00 13.00
BDV 60 with fittings such as bends, tees, reducers, clamps, Meter
etc. including necessary excavation, trench filling
etc. complete.
Spec. No.: As directed by Engineer in charge.
30f / 20 Providing, laying & fixing P.V.C. pipe of 50mm dia. Running 137.00 17.00
BDV 60 with fittings such as bends, tees, reducers, clamps, Meter
etc. including necessary excavation, trench filling
etc. complete.
Spec. No.: As directed by Engineer in charge.
30g / 20 Providing, laying & fixing P.V.C. pipe of 75mm dia. Running 198.00 18.00
BDV 60 with fittings such as bends, tees, reducers, clamps, Meter
etc. including necessary excavation, trench filling
etc. complete.
Spec. No.: As directed by Engineer in charge.
30h / 20 Providing, laying & fixing P.V.C. pipe of 110 mm. Running 281.00 19.00
BDV 60 dia. with fittings such as bends, tees, reducers, Meter
clamps, etc. including necessary excavation, trench
filling etc. complete.
Spec. No.: As directed by Engineer in charge.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
31 / 20 Providing and fixing partition with kadappa stone of Square 718.00 72.00
BDV all sizes and 25 mm thick polished on both side and Meter
edges to original including fixing in position in
cement mortor 1:4 curing polish-ing, cleaning etc
complete.
Spec. No.: As directed by Engineer in charge.
32 / 20 Providing and fixing Orissa type white glazed Number 2582.00 709.00
BDV earthenware 575 mm water closet pan including S
trap with earthenware foot rests, cast iron soil and
vent pipe upto outside face of the wall 1:2:4 brick
bat lime concrete bedding without flushing tank and
its accessories etc. complete.
Spec. No.: As directed by Engineer in charge.
33 / 20 Providing and fixing chromium plated towal rod 16 Number 158.00 13.00
BDV mm dia and 75 cm. in length including all
accessories complete.
Spec. No.: As directed by Engineer in charge.
34 / 20 Providing and Fixing half turn 25 mm dia gun metal Number 409.00 27.00
BDV flushing cock including all accessories etc.
complete.
Spec. No.: As directed by Engineer in charge.
35 / 20 Providing and fixing 1st class white glazed Number 5313.00 824.00
BDV earthenware Orissa Type W.C. Pan 580 mm dia
including P or S trap cast iron soil and vent pipe
upto the outside face of the wall (1:5:1 0) cement
concrete bedding 15 mm thick, 10 liter P.V.C.
flushing cistern with all necessary pipe connection
etc. complete.
Spec. No.: As directed by Engineer in charge.
36 / 20 Providing and fixing European type white glazed Number 4124.00 633.00
BDV earthenware coupled closet symphonic trap with
symphonic low level white glazed 10 litres cistern
with black backlite seat with all necessary pipe
connection etc. complete.
Spec. No.: As directed by Engineer in charge.
37 / 20 Providing & fixing orissa type colour glazed Number 5756.00 783.00
BDV earthenware 625 x 450 mm. w.c. pan including trap,
C.I. soil & vent pipe upto the out side face of wall
including 100 mm. dia. C.I. plug, bend, 15mm. thick
10 litre PVC flushing cistern with all necessary pipe
connection etc. complete.
Spec. No.: As directed by Engineer in charge.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
38a / 20 Providing and fixing 40 mm. dia Ball cock medium Number 587.00 32.00
BDV type with PVC float including sockets & necessary
fittings and tested as per municipal requirements
etc. complete.
Spec. No.: As directed by Engineer in charge.
38b / 20 Providing and fixing 15 mm. dia Ball cock medium Number 201.00 31.00
BDV type with PVC float including sockets & necessary
fittings and tested as per municipal requirement etc.
complete.
Spec. No.: As directed by Engineer in charge.
39i / 20 Cleaning elevated water storage Reservoir within a Number 261.00 131.00
BDV given period, by using bleaching powder at the rate
of 14 gm/sq.m .washing thrice potassium
permanganate at the rate of 2.50 gm/sq.m. finally,
cleaning washing by using nylon brush, coir string
and duster, bailing out water etc. complete.) i)Tank
capacity up to 2,000 liter
Spec. No.: As directed by Engineer in charge.
39ii / 20 Cleaning elevated water storage Reservoir within a Number 350.00 147.00
BDV given period, by using bleaching powder at the rate
of 14 gm/sq.m .washing thrice potassium
permanganate at the rate of 2.50 gm/sq.m. finally,
cleaning washing by using nylon brush, coir string
and duster, bailing out water etc. complete.ii) Tank
capacity up to 2,001 to 5000 liter
Spec. No.: As directed by Engineer in charge.
39iii / 20 Cleaning elevated water storage Reservoir within a Number 377.00 147.00
BDV given period, by using bleaching powder at the rate
of 14 gm/sq.m .washing thrice potassium
permanganate at the rate of 2.50 gm/sq.m. finally,
cleaning washing by using nylon brush, coir string
and duster, bailing out water etc. complete.iii) Tank
capacity up to 5,001 to 7000 liter
Spec. No.: As directed by Engineer in charge.
39iv / 20 Cleaning elevated water storage Reservoir within a Number 495.00 164.00
BDV given period, by using bleaching powder at the rate
of 14 gm/sq.m .washing thrice potassium
permanganate at the rate of 2.50 gm/sq.m. finally,
cleaning washing by using nylon brush, coir string
and duster, bailing out water etc. complete.iv) Tank
capacity up to 7,001 to 10000 liter
Spec. No.: As directed by Engineer in charge.
39v / 20 Cleaning elevated water storage Reservoir within a Number 576.00 212.00
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
39vi / 20 Cleaning elevated water storage Reservoir within a Number 873.00 392.00
BDV given period, by using bleaching powder at the rate
of 14 gm/sq.m .washing thrice potassium
permanganate at the rate of 2.50 gm/sq.m. finally,
cleaning washing by using nylon brush, coir string
and duster, bailing out water etc. complete.vi) Tank
capacity upto 15,001 to 20,000 litre
Spec. No.: As directed by Engineer in charge.
39vii / 20 Cleaning elevated water storage Reservoir within a Number 1342.00 651.00
BDV given period, by using bleaching powder at the rate
of 14 gm/sq.m .washing thrice potassium
permanganate at the rate of 2.50 gm/sq.m. finally,
cleaning washing by using nylon brush, coir string
and duster, bailing out water etc. complete.vii) Tank
capacity upto 20,001 to 30,000 litre
Spec. No.: As directed by Engineer in charge.
39viii / 20 Cleaning elevated water storage Reservoir within a Number 1459.00 732.00
BDV given period, by using bleaching powder at the rate
of 14 gm/sq.m .washing thrice potassium
permanganate at the rate of 2.50 gm/sq.m. finally,
cleaning washing by using nylon brush, coir string
and duster, bailing out water etc. complete.viii) Tank
capacity upto 30,001 to 40,000 litre
Spec. No.: As directed by Engineer in charge.
39x / 20 Cleaning elevated water storage Reservoir within a 1000 31.00 27.00
BDV given period, by using bleaching powder at the rate Litre
of 14 gm/sq.m .washing thrice potassium
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
39xi / 20 Cleaning elevated water storage Reservoir within a 1000 14.00 9.00
BDV given period, by using bleaching powder at the rate Litre
of 14 gm/sq.m .washing thrice potassium
permanganate at the rate of 2.50 gm/sq.m. finally,
cleaning washing by using nylon brush, coir string
and duster, bailing out water etc. complete.xi)
Capacity above one lakh upto 4.00 lakh
Spec. No.: As directed by Engineer in charge.
39xii / 20 Cleaning elevated water storage Reservoir within a 1000 12.00 8.00
BDV given period, by using bleaching powder at the rate Litre
of 14 gm/sq.m .washing thrice potassium
permanganate at the rate of 2.50 gm/sq.m. finally,
cleaning washing by using nylon brush, coir string
and duster, bailing out water etc. complete.xii)
Capacity above 4.00 lakh upto 7.00 lakh
Spec. No.: As directed by Engineer in charge.
39xiii / 20 Cleaning elevated water storage Reservoir within a 1000 10.00 6.00
BDV given period, by using bleaching powder at the rate Litre
of 14 gm/sq.m .washing thrice potassium
permanganate at the rate of 2.50 gm/sq.m. finally,
cleaning washing by using nylon brush, coir string
and duster, bailing out water etc. complete.xiii)
Capacity above 7.00 lakh upto 12.00 lakh
Spec. No.: As directed by Engineer in charge.
40a / 20 Providing and fixing 75 mm dia stabiliser pipe/ Running 386.00 66.00
BDV P.V.C. soil vent/waste pipe and with necessary Meter
fixtures and fitting such as bends, tees, single
junctions, slotted vent, clamps etc. com-plete.
Spec. No.: As directed by Engineer in charge.
40b / 20 Providing and fixing 100 mm dia stabiliser pipe/ Running 572.00 66.00
BDV P.V.C. soil vent/waste pipe and with necessary Meter
fixtures and fitting such as bends, tees, single
junctions, slotted vent, clamps etc. com-plete.
Spec. No.: As directed by Engineer in charge.
41a / 20 Providing and fixing H.D.P container Syntex or alike Litre 9.00 1.00
BDV one piece moulded water tank made out of high
density polythyler and built corrugated inclusive of
delivery up to destination hoisting and fixing of
accessories such as inlet,outlet overflow pipe
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
41b / 20 Providing and fixing H.D.P container Syntex or Litre 8.00 1.00
BDV alike one piece moulded water tank made out of low
density polythyler and built corrugation including of
delivery up to destination hoisting and fixing of
accessories such as inlet, outlet overflow of all
tanks capacity above 1000 to 20,000 litres
Spec. No.: As directed by engineer-in-charge.
42a / 20 Providing and fixing on walls/ ceiling/ floor 15 mm Running 158.00 75.00
BDV dia. CPVC pipe with necessary fittings, remaking Meter
good the demolished portion etc. complete.
Spec. No.: BD.V 5 page 551 and as directed by
Engineer in charge
42c / 20 Providing and fixing on walls/ ceiling/ floor 25 mm Running 216.00 78.00
BDV 5 dia. CPVC pipe with necessary fittings, remaking Meter
good the demolished portion etc. complete.
Spec. No.: BD.V 5 page 551 and as directed by
Engineer in charge
42d / 20 Providing and fixing on walls/ ceiling/ floor 32 mm Running 265.00 78.00
BDV 5 dia. CPVC pipe with necessary fittings, remaking Meter
good the demolished portion etc. complete.
Spec. No.: BD.V 5 page 551 and as directed by
Engineer in charge
42e / 20 Providing and fixing on walls /ceiling/ floor 40 mm Running 334.00 78.00
BDV 5 dia. CPVC pipe with necessary fittings, remaking Meter
good the demolished portion etc. complete.
Spec. No.: BD.V 5 page 551 and as directed by
Engineer in charge
42f / 20 Providing and fixing on walls/ ceiling/ floor 50 mm Running 501.00 78.00
BDV 5 dia. CPVC pipe with necessary fittings, remaking Meter
good the demolished portion etc. complete.
Spec. No.: BD.V 5 page 551 and as directed by
Engineer in charge
43a / 20 Providing and laying in trenches 15 mm dai. CPVC Running 180.00 99.00
BDV 5 pipe including necessary excavation, fittings. Meter
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
43b / 20 Providing and laying in trenches 20 mm dai. CPVC Running 200.00 99.00
BDV 5 pipe including necessary excavation, fittings. Meter
Refilling trenches etc. complete.
Spec. No.: BD.V 5 page 551 and as directed by
Engineer in charge
43c / 20 Providing and laying in trenches 25 mm dai. CPVC Running 232.00 99.00
BDV 5 pipe including necessary excavation, fittings. Meter
Refilling trenches etc. complete.
Spec. No.: BD.V 5 page 551 and as directed by
Engineer in charge
43d / 20 Providing and laying in trenches 32 mm dai. CPVC Running 302.00 99.00
BDV 5 pipe including necessary excavation, fittings. Meter
Refilling trenches etc. complete.
Spec. No.: BD.V 5 page 551 and as directed by
Engineer in charge
43e / 20 Providing and laying in trenches 40mm dai. CPVC Running 355.00 99.00
BDV 5 pipe including necessary excavation, fittings. Meter
Refilling trenches etc. complete.
Spec. No.: BD.V 5 page 551 and as directed by
Engineer in charge
43f / 20 Providing and laying in trenches 50mm dai. CPVC Running 524.00 99.00
BDV 5 pipe including necessary excavation, fittings. Meter
Refilling trenches etc. complete.
Spec. No.: BD.V 5 page 551 and as directed by
Engineer in charge
44 / 20 Providing and fixing 10 cm PVC nahani trap with Number 313.00 131.00
BDV 32 grating etc. complete.
Spec. No.: BD.V 32 A page 551 and as directed by
Engineer in charge
45a / 20 Providing and fixing reinforced cement concrete Number 2513.00 147.00
BDV cover of size 90 cm x 45 cm with frame over
inspection chamber etc. complete. Heavy duty (225
kg)
Spec. No.: As directed by Engineer in charge.
45b / 20 Providing and fixing reinforced cement concrete Number 1722.00 247.00
BDV cover of size 90 cm x 45 cm with frame over
inspection chamber etc. complete. Medium duty
(140 kg)
Spec. No.: As directed by Engineer in charge.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
46a / 20 Providing and fixing reinforced cement concrete Number 2318.00 231.00
BDV cover of size 60 cm x 45 cm with frame over
inspection chamber etc. complete. Heavy duty (160
kg)
Spec. No.: As directed by Engineer in charge.
46b / 20 Providing and fixing reinforced cement concrete Number 1332.00 231.00
BDV cover of size 60 cm x 45 cm with frame over
inspection chamber etc. complete.Medium duty
(100 kg)
Spec. No.: As directed by Engineer in charge.
47a / 20 Providing and making ISI Mark ferrule connection of Number 745.00 212.00
BDV 4 15 mm dia. To water main including ferrule coupling
cast iron bell mouth cover, built in non return valve
and fixing including excavation and reinstatement
complete.
Spec. No.: Bd.V. 4 page 551
47b / 20 Providing and making ISI Mark ferrule connection of Number 1076.00 212.00
BDV 4 20 mm dia. To water main including ferrule coupling
cast iron bell mouth cover, built in non return valve
and fixing including excavation and reinstatement
complete.
Spec. No.: Bd.V. 4 page 551
47c / 20 Providing and making ISI Mark ferrule connection of Number 1679.00 212.00
BDV 4 25mm dia. To water main including ferrule coupling
cast iron bell mouth cover, built in non return valve
and fixing including excavation and reinstatement
complete.
Spec. No.: Bd.V. 4 page 551
47d / 20 Providing and making ISI Mark ferrule connection of Number 2637.00 212.00
BDV 4 32 mm dia. To water main including ferrule coupling
cast iron bell mouth cover, built in non return valve
and fixing including excavation and reinstatement
complete.
Spec. No.: Bd.V. 4 page 551
47e / 20 Providing and making ISI Mark ferrule connection of Number 3770.00 212.00
BDV 4 40mm dia. To water main including ferrule coupling
cast iron bell mouth cover, built in non return valve
and fixing including excavation and reinstatement
complete.
Spec. No.: Bd.V. 4 page 551
47f / 20 Providing and making ISI Mark ferrule connection of Number 6362.00 212.00
BDV 4 50 mm dia. To water main including ferrule coupling
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
48 / 20 Providing and fixing stainless steel sink of size 600 Number 8342.00 1145.00
BDV 4 x 510 x 200 mm of Nirali or equivalent make
incluidng coupling, outlet pipe, elbow and other
necessary fitting, finishing etc. complete.**
Spec. No.: As directed by Engineer in charge
49 / 20 Providing and fixing C.P. Angular stop clock with Number 879.00 99.00
BDV wall flange jaquar make continental (CAT.NO.
CON-059) including necessary sockets/union nut
etc. complete.**
Spec. No.: As directed by Engineer in charge
50 / 20 Providing and fixing C.P.Two way BIB cock jaquar Number 1070.00 99.00
BDV make continental (CAT.NO. CON-041) including
necessary sockets/union nut etc. complete.
Spec. No.: As directed by Engineer in charge
51 / 20 Providing and fixing C.P. wall mixer with provision Number 3696.00 198.00
BDV for overhead shower with 115mm long bend pipe &
wall flange jaquar or equivalent make continental
(CAT.NO. CON-273 UPR) including necessary
sockets/union nut etc. complete.**
Spec. No.: As directed by Engineer in charge
52 / 20 Providing and fixing C.P. pillar cock long neck with Number 1122.00 99.00
BDV aerator j jaquar or equivalent make continental
(CAT.NO. CON -021) including necessary
sockets/union nut etc. complete.**
Spec. No.: As directed by Engineer in charge
53 / 20 Providing and fixing C.P. BIB cock with wall flange j Number 866.00 115.00
BDV jaquar or equivalent make continental (CAT.NO.
CON-047) including necessary sockets/ union nut
etc. complete.**
Spec. No.: As directed by Engineer in charge
54 / 20 Providing and fixing C.P. sink cock with raised J Number 1598.00 99.00
BDV shaped swinging casted spout jaquar or equivalent
make continental (CAT.NO. CON -359) including
necessary sockets/ union nut etc. complete.**
Spec. No.: As directed by Engineer in charge
55 / 20 Providing and fixing P.V.C. Rain water pipes of Running 398.00 66.00
BDV 160mm outer diameter and having wall thickness of Meter
2.2 to 2.7 mm confirming to I.S. 13592-1992
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
56 / 20 Providing and fixing European type wall-hung white Number 12654.00 1617.00
BDV water closet of Paryware/Hindware with push
valve concealed type with cover plate 32mm size of
JAQUAR MAKE SERIES FLV-1095 including soil
pipe ,vent pipe up to outside face of wall ,100mm
dia. G.I. plug bend inlet pipe all fittings, cutting&
making good walls, floors etc. complete.**
Spec. No.: As directed by Engineer Incharge
57 / 20 Providing and Fixing 110 mm diameter PVC Rain Running 347.00 66.00
BDV Water pipe with necessary fittings such as bends, Meter
tees, single junctions, slotted vent, clamps etc
complete
Spec. No.: As directed by Engineer Incharge
58 / 20 Providing and fixing Oval Type Under Counter Number 13013.00 1682.00
BDV Wash Hand Basin of 16 inch x 22 inch size and of
special colour shade having Telephonic Black /
Colour Granite of 180 mm thick fixed on Black
Kadappa Framework, including Chromium Plated
Coupling Bottle-Trap using Cera Company or
equivalent Oval Type Wash basin Model No 3448
as per detailed drawing or as directed by Engineer-
In- Charge etc. Complete
Spec. No.: As directed by Engineer Incharge
complete.
Spec. No.: Bd.V.5 Page No. 551
74 / 20 Providing and laying in trenches 100 mm dia. heavy Running 1148.00 118.00
BDV 5 grade having embossed as ISI Mark galvanised iron Meter
pipes of 14.74 kg/metre necessary fitting remaking
good the demolished portion with filling trenches
and with primer of anti-corrosive oil paint , 2 coats
complete.
Spec. No.: Bd.V.5 Page No. 551
75 / 20 Providing and fixing 8 cm rigid PVC Nahani trap Number 299.00 131.00
BDV 23 including PVC grating ,bend, connecting piece of
UPVC pipe up to the outside face of wall ,making
the good damaged surface and testing etc.
complete ( Prior approval of sample and brand by
Ex. Engr. is necessary before use)
Spec. No.: Specfications
76 / 20 Providing and fixing 15 cm rigid PVC Nahani trap Number 355.00 131.00
BDV 24 including PVC grating ,bend,connectingpiece of
UPVC pipe up to the outside face of wall ,making
the good damaged surface and testing etc.
complete ( Prior approval of sample and brand by
Ex. Engr. is necessary before use)
Spec. No.: Specfications
77 / 20 Providing and fixing European type white glazed Number 4576.00 881.00
BDV 21 earthenware water closet pan with UPVC seat and
lid with chromiumplated brass hinges and rubber
buffers including UPVC and vent pipe up to the
outside face of wall 10 literenameled low level
flushing cistern with fittings pipe stop tap brackets
for fixing cistern 32 mm dia. UPVC flush pipe with
fittings and clamps ,20 mm dia.UPVC overflow pipe
,mosquito proof couplings G.I. chain and pulley,with
water Jet and fitting including cutting and making
good to the walls and floors testing etc. complete.(
prior approval of sample and brand by Ex. Engineer
is necessary before use)
Spec. No.: Specfications
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
78 / 20 Providing and fixing European type white glazed Number 3853.00 881.00
BDV 22 earthenware water closet pan with UPVC seat and
lid with chromium plated brass hinges and rubber
buffers including UPVC and vent pipe up to the
outside face of wall without flushing cistern with
flush cock and with water Jet and necessary fittings
including cutting and making good to the walls and
floors testing etc. complete.( prior approval of
sample and brand by Ex. Engineer is necessary
before use)
Spec. No.: Specfications
79 / 20 Providing and fixing European type Colour glazed Number 4768.00 881.00
BDV 23 earthenware water closet pan with UPVC seat and
lid with chromium plated brass hinges and rubber
buffers including UPVC and vent pipe up to the
outside face of wall 10 liter enameled low level
flushing cistern with fittings pipe stop tap brackets
for fixing cistern 32 mm dia. UPVC flush pipe with
fittings and clamps ,20 mm dia.UPVC overflow pipe
,mosquito proof couplings G.I. chain and pulley,with
water Jet and fitting including cutting and making
good to the walls and floors testing etc. complete.(
prior approval of sample and brand by Ex. Engineer
is necessary before use)
Spec. No.: Specfications
80 / 20 Providing and fixing European type Colour glazed Number 4045.00 881.00
BDV 20 earthenware water closet pan with UPVC seat and
lid with chromium plated brass hinges and rubber
buffers including UPVC and vent pipe up to the
outside face of wall without flushing cistern with
flush cock and with water Jet and necessary fittings
including cutting and making good to the walls and
floors testing etc. complete.( prior approval of
sample and brand by Ex. Engineer is necessary
before use)
Spec. No.: Specfications
81 / 20 Providing and fixing Anglo Indian type white glazed Number 6385.00 881.00
BDV 22 earthenware water closet pan with trap with UPVC
seat and lid with chromium plated brass hinges and
rubber buffers including UPVC and vent pipe up to
the outside face of wall with flushing cistern and
necessary fittings including cutting and making
good to the walls and floors testing etc. complete.(
prior approval of sample and brand by Ex. Engineer
is necessary before use)
Spec. No.: Specfications
82 / 20 Providing and fixing high level 10 liter capacity with Number 1384.00 131.00
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
BDV 23 fittings inlet PVC pipe with stop tap ,brackets for
fixing the cistern,32 mm dia. PVC flush pipe with
fitting and clamps 20 mm dia. PVC overflow pipe
with mosquito proof couplings, galvanised iron
chain and pulley painting if ordered to cistern pipe
etc. and cutting and making good the damaged wall
and testing etc. complete ( Prior approval of sample
and brand by Ex. Engr. is necessary before use)
Spec. No.: Specfications
83 / 20 Providing and fixing in position UPVC ultra violet Number 111.00 5.00
BDV 23 stabilized 110 mm outer diameter cowl dome
confirming to I.S.-4985 including making joints with
solvent cement etc. complete
Spec. No.: Specfications
84 / 20 Providing and fixing Glass self 125 mm wide and Number 551.00 65.00
BDV 23 600 mm long with necessary chromium plated
brackets providingT.W.gutties etc. complete
Spec. No.: Specfications
88 / 20 Providing , laying & fixing ,jointing Supreme Eco- Running 309.00 20.00
Bd-V drain 110 mm SN 8 Nu- Drain Upvc pipes or of Meter
equivalent make, manufacture as per EN 13476 or
equivalent as per I.S.15328 with fittings such a
bends, tees, coupler, etc, jointing with rubber
lubricant including necessary excavation, trench
refilling with selective excavated material etc.
complete.
Spec. No.: As Directected By Engineer Incharge
89 / 20 Providing , laying & fixing ,jointing Supreme Eco- Running 505.00 20.00
Bd-V drain 160 mm SN 4 Nu- Drain Upvc pipes or of Meter
equivalent make, manufacture as per EN 13476 or
equivalent as per I.S.15328 with fittings such a
bends, tees , coupler, etc, jointing with rubber
lubricant including necessary excavation, trench
refilling with selective excavated materialetc.
complete.
Spec. No.: As Directected By Engineer Incharge
90 / 20 Providing , laying & fixing ,jointing Supreme Eco- Running 519.00 20.00
Bd-V drain 200 mm SN 4 Nu- Drain Upvc pipes or of Meter
equivalent make, manufacture as per EN 13476 or
equivalent as per I.S.15328 with fittings such a
bends, tees tees , coupler etc, jointing with rubber
lubricant including necessary excavation, trench
refilling with selective excavated materialetc.
complete.
Spec. No.: As Directected By Engineer Incharge
complete
92 / 20 Providing and fixing 15 mm diameter PVC Aqua Number 360.00 72.00
Bd-V kraft type Supreme make or equivalent make super
Two Way bib tap with flange and extender including
all accessories etc complete
93 / 20 Providing and fixing 15 mm diameter PVC Aqua Number 165.00 33.00
Bd-V kraft type Supreme make or equivalent make super
push button type cock / tap with flange including all
accessories etc complete
94 / 20 Providing and fixing 15 mm diameter PVC Aqua Number 550.00 110.00
Bd-V kraft type Supreme make or equivalent make super
wall sink type tap with flange including all
accessories etc complete
95 / 20 Providing and fixing 15 mm diameter PVC Aqua Number 448.00 90.00
Bd-V kraft type Supreme make or equivalent make super
jet spray with flange 2 in 1 faucet 1.50 metre long
including all accessories etc complete
96 / 20 Providing and fixing 15 mm diameter PVC Aqua Number 210.00 42.00
Bd-V kraft type Supreme make or equivalent make super
right angle stop tap with flange including all
accessories etc complete
97 / 20 Providing and fixing 15 mm diameter PVC Aqua Number 305.00 61.00
Bd-V kraft type Supreme make or equivalent make super
Pillar tap with flange including all accessories etc
complete
**Note**—For item No. 48 to 54 and 56 Prior Number 305.00 61.00
approval of Superintending Engineer will be
necessary
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
Bd-W : Miscellaneous
1a / 21 Guniting by dry mix process as per IS 9012 (1978) Square 365.00 97.00
BDW 2 to ceiling sofit etc. in C.M. 1:3, 20 mm. thick under Meter
pressure of 2.1 kg to 2.8 kg per sq.cm including
forms, scaffolding, floating the surface, curing for
14 days etc. complete. (Excluding reinforcement).
Spec. No.: Bd.W.2 Page No. 582
1b / 21 Guniting by dry mix process as per IS 9012 (1978) Square 389.00 120.00
BDW 2A to ceiling sofit etc. in C.M. 1:3, 25mm thick under Meter
pressure of 2.1 kg to 2.8 kg per sq.cm. including
forms, scaffolding, floating the surface, curing for
14 days etc. complete. (Excluding reinforcement).
Spec. No.: Bd.W.2 Page No. 582
1c / 21 Guniting by dry mix process as per IS 9012 (1978) Square 477.00 132.00
BDW 2B to ceiling, sofit etc. in c.m. 1:3, 40mm. thick under Meter
pressure of 2.1 Kg. to 2.8 Kg. per sq.m. including
forms, scaffolding, floating the surface, curing for
14 days etc. complete. (Excluding reinforcement)
Spec. No.: Bd.W.2 Page No. 582
2a / 21 Guniting by dry mix process as per IS 9012 (1978) Square 377.00 91.00
BDW 2D to beams in C.M. 1:3, 20 mm. thick under pressure Meter
of 2.1 kg to 2.8 kg sq.cm. including forms,
scaffolding, floating the surface, curing for 14 days
etc. complete. (Excluding reinforcement).
Spec. No.: Bd.W.2 Page No. 582
2b / 21 Guniting by dry mix process as per IS 9012 (1978) Square 422.00 118.00
BDW 2E to beams in C.M. 1:3, 25mm. thick under pressure Meter
of 2.1 kg to 2.8 kg per sq.cm. including forms,
scaffolding, floating the surface, curing for 14 days
etc. complete. (Excluding reinforcement).
Spec. No.: Bd.W.2 Page No. 582
3a / 21 Guniting by dry mix process as per I.S. 9012 Square 350.00 90.00
BDW 2K (1978) to the vertical surface (other than column) in Meter
C.M. 1:3, 20 mm. thick under pressure of 2.1 Kg. to
2.8 Kg per sq.cm. including forms, scaffolding,
floating, the surface curing for 14 days etc.
complete. (excluding reinforcement).
Spec. No.: Bd.W.2 Page No. 582
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
3b / 21 Guniting by dry mix process as per IS 9012 (1978) Square 370.00 93.00
BDW 2L to vertical surface (other than column) in C.M. 1:3, Meter
25 mm. thick under pres-sure of 2.1 Kg. to 2.8 Kg.
per sq.cm. including forms, scaffold-ing, floating
the surface, curing for 14 days etc. complete
(excluding reinforcement).
Spec. No.: Bd.W.2 Page No. 582
4 / 21 Providing and erecting 1.5 metre high wire fencing Running 537.00 63.00
BDW 3 with seven rows of barbed wire supported on Meter
M.S.Angles (50 mm x 50 mm x 6mm) at 2.5
Metres, center to center including excavating pits
for foundation, fixing post in cement concrete 1:4:8
of size 45 x 45 x 45 cm . fastening the wire and
painting the M.S.Angles with one coat of red lead
primer and two coats of painting etc. complete.
Spec. No.: Bd.W.3 Page No. 583
5 / 21 Providing and fixing mild steel grill gate with angle Square 1990.00 175.00
BDW 6 iron frame 65 mm x 65 mm x 10 mm with iron bars Meter
at 150mm.C/C and diagonal flats as per the
detailed drawing including hinges, pivot blocks
locking arrangement, welding riveting and oil
painting of three coats of approved shade. Weight
of gate 35 Kg/smt.
Spec. No.: Bd.W.6 Page No. 585
6a / 21 Providing and fixing 90 cm. x 60 cm. Marble plate Number 7302.00 155.00
BDW 7 engraving 10cm. height letter, figures including
painting the lefters/figures with approved colour
and shade complete.
Spec. No.: Bd.W.7 Page No. 586
6b / 21 Providing and fixing 90 cm. x 60 cm. Granite plate Number 8095.00 155.00
BDW 7 engraving 10cm. height letter, figures including
painting the lefters/figures with approved colour
and shade complete.
Spec. No.: Bd.W.7 Page No. 586
7 / 21 Removing double country tiled roof with ridge and Square 49.00 49.00
BDW 8-2 with battens and stacking the materials as directed Meter
with all leads and lifts, complete including removing
wood work below.
Spec. No.: Bd.W.8 Page No. 587
9a / 21 Removing Queen Post truss from roof and stacking Number 731.00 731.00
BDW 8-5A the materials as directed with all leads and lifts
complete.
Spec. No.: Bd.W.8 Page No. 587
9b / 21 Removing King Post truss from roof and stacking Number 496.00 496.00
BDW 8-5B the materials as directed with all leads and lifts
complete.
Spec. No.: Bd.W.8 Page No. 587
10 / 21 Removing Other type truss below 5 metres span Number 361.00 361.00
BDW 8-5C from roof and stacking the materials as directed
with all leads and lifts complete.
Spec. No.: Bd.W.8 Page No. 587
11 / 21 Dismantling flat wooden or A.C. sheet ceiling with Square 24.00 24.00
BDW 8-8 frame work including stacking the materials as Meter
directed with all leads, lifts, complete.
Spec. No.: Bd.W.8 Page No. 587
12 / 21 Removing cloth ceiling including frame work and Square 10.00 10.00
BDW 8-9 stacking the materials as directed with all leads, Meter
lifts, complete.
Spec. No.: As directed by Engineer in charge.
13a / 21 Dismantling brick masonry in Mud and stacking the Cubic 111.00 111.00
BDW 8 materials as directed with all leads lifts, complete. Meter
Spec. No.: As directed by Engineer in charge.
15a / 21 Removing lime or lean cement concrete including Cubic 237.00 237.00
BDW 8 stacking the spoils as directed with all leads, lifts, Meter
complete.
Spec. No.: As directed by Engineer in charge.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
15b / 21 Removing rich mix cement concrete including Cubic 399.00 399.00
BDW 8 stacking the spoils as directed with all leads, lifts, Meter
complete.
Spec. No.: As directed by Engineer in charge
15c / 21 Removing brick bat coba including stacking the Cubic 259.00 259.00
BDW 8 spoils as directed with all leads, lifts, complete. Meter
Spec. No.: As directed by Engineer in charge.
15d / 21 Removing doors and windows with frames and Number 66.00 66.00
BDW 8 stacking the materials as directed with all leads,
lifts, complete.
Spec. No.: As directed by Engineer in charge.
15e / 21 Removing ventilators and small windows with Number 55.00 55.00
BDW 8 frame and stacking the materials with all leads lifts,
complete.
Spec. No.: As directed by Engineer in charge.
15f / 21 Removing wooden or A.C. partition including frame Square 17.00 17.00
BDW 8 work and stack-ing the materials as with all leads, Meter
lifts, complete.
Spec. No.: As directed by Engineer in charge.
15g / 21 Removing teak wood trellies work with frame Square 14.00 14.00
BDW 8 including stacking the materials as directed with all Meter
leads, lifts, complete.
Spec. No.: As directed by Engineer in charge.
15i / 21 Removing Shahabad or Tabdur stones from floor Square 18.00 18.00
BDW 8 without bed concrete including stacking the Meter
materials as directed with all leads, lifts, complete.
Spec. No.: As directed by Engineer in charge.
17b / 21 Removing mud plaster including disposing of the Square 7.00 7.00
BDW 8 spoils as direct-ed with all leads, lifts, complete. Meter
Spec. No.: As directed by Engineer in charge.
18 / 21 Removing wire fencing with wooden post and Running 22.00 22.00
BDW 8 stacking the material with all leads, lifts, complete. Meter
Spec. No.: As directed by Engineer in charge.
19 / 21 Removing wire fencing with iron/C.C. fencing posts Running 28.00 28.00
BDW 8 and stacking the materials as directed with all Meter
leads, lifts complete.
Spec. No.: As directed by Engineer in charge.
20 / 21 Removing iron pipe railing having wooden R.C.C. Running 29.00 29.00
BDW 8 or C.C. or iron posts and stacking the materials as Meter
directed.
Spec. No.: As directed by Engineer in charge.
22 / 21 Removing cast iron or wrought iron or A.C. pipe Running 10.00 10.00
BDW 8 and stacking them as directed with all leads, lifts, Meter
complete.
Spec. No.: As directed by Engineer in charge.
23 / 21 Dismantling the R.C.C. work 1:2:4 and sorting out Cubic 614.00 614.00
BDW 8 the materials such as steel etc. as directed and Meter
stacking them within the specified lead as directed.
Spec. No.: As directed by Engineer in charge.
24a / 21 Removing Np-2 and Np-3 class pipes including Running 130.00 54.00
BDW 8 stacking at road side as directed by the Engineer in Meter
charge. a) Upto 900mm dia.
Spec. No.: As directed by Engineer in charge.
24b / 21 Removing Np-2 and Np-3 class pipes including Running 152.00 75.00
BDW 8 stacking at road side as directed by the Engineer in Meter
charge. b) 900mm dia. and above.
Spec. No.: As directed by Engineer in charge.
25 / 21 Removing single country tiled roof with battens and Square 30.00 30.00
BDW 8 stacking the materials as directed with all leads Meter
and lifts etc. complete.
Spec. No.: As directed by Engineer in charge.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
26 / 21 Removing battens from roof and stacking them as Running 4.00 4.00
BDW 8 directed with all leads and lifts etc. complete. Meter
Spec. No.: As directed by Engineer in charge.
29 / 21 Removing rafters from roof including the materials Running 9.00 9.00
BDW 8 as directed with all leads, lifts, etc. complete. Meter
Spec. No.: As directed by Engineer in charge.
30 / 21 Removing cloth partition with frame work and Square 8.00 8.00
BDW 8 stacking the materials as directed with all leads, Meter
lifts etc. complete.
Spec. No.: As directed by Engineer in charge.
31 / 21 Providing and fixing Jute Kanthan (Tarat) screen to Square 42.00 19.00
BDW the scaffold-ing for external guniting as directed Meter
including removing the same after the work is over
etc complete.
Spec. No.: As directed by Engineer in charge
32 / 21 Providing and erecting chain link fencing 1.6 M. Running 1629.00 139.00
BDW height with G.I. chain link of size 50 x 50 mm 8 Meter
guage thick and fixed 75 mm above Ground level
vertical M.S Angle of 40 x 40 x 6 mm size
embedded in C.C. block of 1:4:8 mix of size 450 x
450 x 670 mm. at 1.75 M.c/c with iron bar 16 mm
dia as hold fast including welding link with angle
frame at 30 cm c/c nuts and bolts and horizontal
M.S. Angles at top and bottom of 25 x 25 x 5 mm
size and vertical M.S. flat 35 x 5 mm and 25 x 5
mm horizontal including cross support of 40 x 40 x
6 mm Angles both sides at every corner or bends
embedded in concrete blocks of 1:4:8 of size 450 x
450 x 670 mm including 3 coats of oil painting etc.
complete.
Spec. No.: As directed by Engineer in charge.
33a / 21 Removing Urinal Pans or Wash hand basin with Number 40.00 40.00
BDW frame including disconnecting the sanitary and
water supply connections. removing the same
carefully and stacking the serviceable materials as
and where directed including throwing the
unserviceable materials out side.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
33b / 21 Removing W.C. Pan including disconnecting the Number 88.00 88.00
BDW sanitary and water supply connections, removing
and breaking flooring and bed con-crete around
pan removing the same carefully and stacking the
service-able materials as and where directed
including of throwing the unserviceable materials
out side.
Spec. No.: As directed by En-gineer in charge.
34 / 21 Providing and erecting 1.2 meter high wire fencing Running 437.00 46.00
BDW with five rows of barbed Wire supported on mild Meter
steel angle(50x50x6mm) post including excavation
of pits of foundation concrete fixing the posts in
(1:4:8) cement concrete block of 45x45x45 cm and
fastening the Wires and painting the angles with
one coat with red lead primer and two coats of oil
painting etc. complete.
Spec. No.: Bd. W. 3, Page No. 583
35 / 21 Providing and fixing rain tattis with bamboos and Square 56.00 26.00
BDW karve grass with 75 mm thick grass and removing Meter
the same after rain is over (size of bamboos 50mm
to 75mm. dia and 3 M to 3.5 M. long.
Spec. No.: As directed by Engineer in charge.
36 / 21 Providing and fixing grass chhapper (roof) with Square 74.00 27.00
BDW necessary bamboos and karve frame with 75 mm. Meter
thick grass etc, removing the same after rain is
over (size of bamboos 50 mm to 75 mm dia and 3
M to 3.5 M. long.)
Spec. No.: As directed by Engineer in charge.
37 / 21 Providing and fixing grass chhapper (roof) with Square 66.00 26.00
BDW necessary bamboos and karve frame with 75 mm. Meter
thick grass etc, removing the same after rain is
over (size of bamboos 25 mm dia and 3 M. to 3.5
M. long
Spec. No.: As directed by Engineer in charge.
38 / 21 Providing and fixing Bamboo Matting screen for Square 112.00 57.00
BDW partition with bamboo sticks. Meter
Spec. No.: As directed by Engineer in charge.
40 / 21 Providing and fixing copper strip 25 mm wide and 3 Running 455.00 125.00
BDW mm thick for lightening conductor including fixing Meter
with screws required scaffolding etc. complete.
Spec. No.: BDW 1 Page 581 as directed Enginner
in charge
Note –Lightening conductor and earthing pit is
not considered in this item
51a / 21 Providing general pest control services to small Number 83.00 13.00
BDW size of inspection chamber to control the nuisance
of cockroaches during the year with monthly check
up.
Spec. No.: As directed by Engineer in charge.
51b / 21 Providing general pest control services to big size Number 179.00 14.00
BDW of inspection chamber to control the nuisance of
cockroaches during the year with monthly check
up.
Spec. No.: As directed by Engineer in charge.
52 / 21 Labour charges for removing grass thorney shurbs, Square 12.00 12.00
BDW Jungli shurb Kubabul and alike grass along Meter
roadside making the ground clean by showel and
phavaras etc. complete.
Spec. No.: As directed by Engineer in charge.
53 / 21 Removing grass gazer grass and disposing off out Square 4.00 4.00
BDW of building premises including making clean the Meter
ground by showel and phavaras etc. complete.
Spec. No.: As directed by Engineer in charge.
55 / 21 Providing and fixing crimped wire G.I. mesh of size Square 680.00 135.00
BDW 20mm x 20mm 10 guage to iron angle frame Meter
including welding crimp mesh to angle frame and
steel flat, fixing the frame in its original position and
oil painting etc. complete. (excluding cost of
structural steel)
Spec. No.: As directed by Engineer in charge.
56 / 21 Dismantling existing brick bat coba in the W/C and Number 895.00 895.00
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
57 / 21 Providing and erecting Y type barbed wire fencing Running 745.00 63.00
BDW with seven rows of wire with 2.45 mm dia G.I. pipe Meter
( Rezan/ concentina ire 0.75 mm dia ) with hot dip
and G.I. coated hooks as per drawing supported on
M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c including
fixing and fastening with wire, painting M.S. angles
with one coat of red lead primer and two coat of oil
paint etc. complete.
Spec. No.: As directed by Engineer in charge.
58 / 21 Providing and fixing 40mm diameter and 1.5mm Running 1938.00 395.00
BDV thick Stainless steel hand railing in S.S.304 Grade Meter
including fabricating ,fixtures, errecting , necessary
welding , grinding , finishing, buffing to stainless
steel pipe etc. complete.**
Spec. No.: As directed by Engineer Incharge
59 / 21 Providing and fixing 900mm high S.S.304 Grade Running 4180.00 916.00
BDV Stainless steel railing with 40mm diameter and Meter
1.5mm thick at top,40mm diameter and 1.5mm
thick vertical supports spaced at 1.5m center to
center and 8mm thick toughened glass including
fabricating ,fixtures, errecting , necessary welding ,
grinding , finishing, buffing to stainless steel pipe
etc. complete.**
Spec. No.: As directed by Engineer Incharge
60 / 21 Providing and fixing 900mm high S.S.304 Grade Running 3958.00 910.00
BDV Stainless steel railing with 40mm diameter and Meter
1.5mm thick at top,40mm diameter and 1.5mm
thick vertical supports spaced at 3.3m center to
center and two pipes of 12mm diameter fixed
horizontally including fabricating ,fixtures, errecting
, necessary welding , grinding , finishing, buffing to
stainless steel pipe etc. complete.**
Spec. No.: As directed by Engineer Incharge
3: CD : Cross dranageworks
1 / 22 Providing rubble filling of trap/ granite/ quartzite Cubic 889.00 221.00
CD 1 gneiss stones for foundations including hand Meter
packing filling gravel/ sand in the voids etc
complete.
Spec. No.: CD.1 Page.No. 159
6a / 22 Providing and laying cement concrete pipe of I.S. Running 1319.00 211.00
CD 7 458:2003 NP-2 class of required diameter in proper Meter
line, level & slope including providing, fixing collars
in cement mortar 1:2, curing complete. (a) 450 mm.
Dia.
Spec. No.: CD.7 Page.No. 162
6b / 22 Providing and laying cement concrete pipe of I.S. Running 1857.00 211.00
CD 7 458:2003 NP-2 class of required diameter in proper Meter
line, level & slope including providing, fixing collars
in cement mortar 1:2, curing complete. (b) 600
mm. Dia.
Spec. No.: CD.7 Page.No. 162
6c / 22 Providing and laying cement concrete pipe of I.S. Running 2920.00 209.00
CD 7 458:2003 NP-2 class of required diameter in proper Meter
line, level & slope including providing, fixing collars
in cement mortar 1:2, curing complete. (c) for 800
mm.dia.
Spec. No.: CD.7 Page.No. 162
6d / 22 Providing and laying cement concrete pipe of I.S. Running 3467.00 245.00
CD 7 458:2003 NP-2 class of required diameter in proper Meter
line, level & slope including providing, fixing collars
in cement mortar 1:2, curing complete. d) for 900
mm dia.
Spec. No.: CD.7 Page.No. 162
6e / 22 Providing and laying cement concrete pipe of I.S. Running 4014.00 292.00
CD 7 458:2003NP-2 class of required diameter in proper Meter
line, level & slope including providing, fixing collars
in cement mortar 1:2, curing complete. e) for 1000
mm dia.
Spec. No.: CD.7 Page.No. 162
6f / 22 Providing and laying cement concrete pipe of I.S. Running 5659.00 308.00
CD 7 458:2003 NP-2 class of required diameter in proper Meter
line, level & slope including providing, fixing collars
in cement mortar 1:2, curing complete. f) for 1200
mm dia.
Spec. No.: CD.7 Page.No. 162
7a / 22 Providing and laying cement concrete pipe of I.S. Running 3204.00 345.00
CD 7 458:2003 NP3 class of required dia. in proper line, Meter
level, & slope including providing fixing collars in
cement mortar 1:2, curing etc. complete. a) for 600
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
mm dia. Spec.No.:
Spec. No.: CD.7 Page.No. 162
7b / 22 Providing and laying cement concrete pipe of I.S. Running 5207.00 339.00
CD 7 458:2003 NP3 class of required dia. in proper line, Meter
level & slope including providing fixing collars in
cement mortar 1:2, curing complete. b) for 800 mm
dia.
Spec. No.: CD.7 Page.No. 162
7c / 22 Providing and laying cement concrete pipe of I.S. Running 5734.00 348.00
CD 7 458:2003 NP3 class of required dia. in proper line, Meter
level & slope including providing, fixing collars in
cement mortar 1:2, curing complete. c) for 900 mm.
dia.
Spec. No.: CD.7 Page.No. 162
7d / 22 Providing and laying cement concrete pipe of I.S. Running 6366.00 370.00
CD 7 458:2003 NP3 class of required dia. in proper line, Meter
level & slope including providing fixing collars in
cement mortar 1:2, curing complete. d) for 1000
mm dia.
Spec. No.: CD.7 Page.No. 162
7e / 22 Providing and laying cement concrete pipe of I.S. Running 8917.00 406.00
CD 7 458:2003 NP3 class of required dia.in proper line, Meter
level & slope including providing fixing collars in
cement mortar 1:2, curing complete. e) for 1200
mm dia.
Spec. No.: CD.7 Page.No. 162
8a / 22 Providing and laying cement concrete pipe of I.S. Running 6994.00 372.00
CD 7 458:2003 NP4 class of required dia. in proper line, Meter
level & slope including providing fixing collars in
cement mortar 1:2, curing complete. a) for 900 mm
dia.
Spec. No.: CD 7 Page 167
8b / 22 Providing and laying cement concrete pipe of I.S. Running 8401.00 372.00
CD 7 458:2003 NP4 class of required dia. in proper line, Meter
level & slope including providing fixing collars in
cement mortar 1:2, curing complete. a) for 1000
mm dia.
Spec. No.: CD 7 Page 167
8c / 22 Providing and laying cement concrete pipe of I.S. Running 10457.00 372.00
CD 7 458:2003 NP4 class of required dia. in proper line, Meter
level & slope including providing fixing collars in
cement mortar 1:2, curing complete. b) for 1200
mm dia.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
11a / 22 Providing and laying in situ M.15 cement concrete Cubic 4617.00 786.00
CD of trap /granite /quartzite /gneiss metal including Meter
compacting, finishing, curing and complete with
reversible Drum Type mixer with SCADA. for
approach slab (excluding reinforcement.) (Cement
5.90 bags/Cu.Mt.) With natural sand.
Spec. No.: CD.15 Page.No. 168 and B.7. Page No.
38
11b / 22 Providing and laying in situ M.15 cement concrete Cubic 4507.00 786.00
CD of trap /granite /quartzite /gneiss metal including Meter
compacting, finishing, curing and complete with
reversible Drum Type mixer with SCADA. for
approach slab (excluding reinforcement.) (Cement
5.90 bags/Cu.Mt.) With crushed sand.
Spec. No.: CD.15 Page.No. 168 and B.7. Page No.
38
12 / 22 Providing & fixing stream lined M-15 grade R.C.C. Number 503.00 113.00
CD 27 guard stone including mild steel bar reinforcement
complete.
Spec. No.: CD.20 Page.No. 169
13a / 22 Providing cast in situ M-10 grade cement concrete Cubic 4360.00 838.00
CD for head walls of C.D. work/ retaining walls etc. Meter
including necessary form work, compaction
finishing and curing complete. with reversible Drum
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
13b / 22 Providing cast in situ M-10 grade cement concrete Cubic 4588.00 838.00
CD for head walls of C.D. work/ retaining walls etc. Meter
including necessary form work, compaction
finishing and curing complete. with reversible
Drum Type mixer with SCADA. (Cement 4.05
bags/cu.m.) With crushed sand
Spec. No.: CD 8 Page 163
14a / 22 Providing and casting in situ plain cement concrete Cubic 5024.00 1718.00
CD M15 grade of trap metal for coping to head walls/ Meter
parapet including centering, form work, compaction
and curing etc. complete with reversible Drum
Type mixer with SCADA. with natural sand
Spec. No.: Bd-E-7
14b / 22 Providing and casting in situ plain cement concrete Cubic 5134.00 1718.00
CD M15 of trap metal for coping to head walls/ parapet Meter
including centering, form work, compaction and
curing etc. complete with reversible Drum Type
mixer with SCADA. with crushed sand
Spec. No.: Bd-E-7
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
1b / 23 Cutting down trees including trunks and branches Number 563.00 563.00
MORTH and stacking the materials neatly with a lead of
201 50m.as directed with girths. above 60cm to 90 cm.
Spec. No.: MORTH 201
1c / 23 Cutting down trees including trunks and branches Number 1007.00 1007.00
MORTH and stacking the materials neatly with a lead of
201 50m. as directed with girths. above 90 cm to
180cm.
Spec. No.: MORTH 201
1d / 23 Cutting down trees including trunks and branches Number 1273.00 1273.00
MORTH and stacking the materials neatly with a lead of
201 50m. as directed with girths. above 180cm
Spec. No.: MORTH 201
2a / 23 Excavation for roadway in earth, soil of all sorts, Cubic 113.00 113.00
MORTH sand, gravel or soft murum including dressing Meter
301 section to the required grade, camber and side
slopes and conveying the excavated materials
with all lifts upto a lead of 50m. and spreading for
embankment or stacking as directed. By Manual
Means
Spec. No.: MORTH 301
2b / 23 Excavation for roadway in earth, soil of all sorts, Cubic 60.00 0.00
MORTH sand, gravel or soft murum including dressing Meter
301 section to the required grade, camber and side
slopes and conveying the excavated materials
with all lifts upto a lead of 50m. and spreading for
embankment or stacking as directed. By
Mechanical Means.
Spec. No.: MORTH 301
7b / 23 Excavation for roadway in hard rock by wedging & Cubic 810.00 748.00
MORTH chiselling or line drilling including dressing section Meter
301 to the required grade, camber and side slopes and
conveying the excavated materials with all lifts
upto a lead of 50m. and spreading for
embankment or stacking as directed.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
10A i / 23 Excavation for catch / side water gutter in strata to Cubic 130.00 130.00
MORTH the specified section including stacking the Meter
301 excavated stuff in a regular bund and disposing of
unsuitable or excess stuff as directed all sorts of
soils. By Manual Means.
Spec. No.: MORTH 301
10A ii / 23 Excavation for catch / side water gutter in strata to Cubic 80.00 6.00
MORTH the specified section including stacking the Meter
309 excavated stuff in a regular bund and disposing of
unsuitable or excess stuff as directed all sorts of
soils. By Mechanical Means
Spec. No.: MORTH 309
10B i / 23 Excavation for catch / side water gutter in strata to Cubic 148.00 148.00
MORTH the specified section including stacking the Meter
309 excavated stuff in a regular bund and disposing of
unsuitable or excess stuff as directed. Hard
murum. By Manual Means.
Spec. No.: MORTH 309
10B ii / 23 Excavation for catch / side water gutter in strata to Cubic 90.00 12.00
MORTH the specified section including stacking the Meter
309 excavated stuff in a regular bund and disposing of
unsuitable or excess stuff as directed. Hard
murum. By Mechanical Means
Spec. No.: MORTH 309
10C i / 23 Excavation for catch / side water gutters in strata Cubic 171.00 171.00
MORTH to the specified section including stacking the Meter
309 excavated stuff in a regular bund and disposing of
unsuitable or excess stuff as directed. Hard
murum and boulder. By Manual Means.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
10C ii / 23 Excavation for catch / side water gutters in strata Cubic 101.00 0.00
MORTH to the specified section including stacking the Meter
309 excavated stuff in a regular bund and disposing of
unsuitable or excess stuff as directed. Hard
murum and boulder. By Mechanical Means.
Spec. No.: MORTH 309
10D i / 23 Excavation for catch / side water gutter in strata to Cubic 285.00 285.00
MORTH the specified section including stacking the Meter
309 excavated stuff in a regular bund and disposing of
unsuitable or excess stuff as directed. Soft rock.
Spec. No.: MORTH 309
10E i / 23 Excavation for catch / side water gutters in strata Cubic 894.00 810.00
MORTH to the specified section including stacking the Meter
309 excavated stuff in a regular bund by chiselling and
wedging and disposing of unsuitable or excess
stuff as directed. Hard rock.
Spec. No.: MORTH 309
10F i / 23 Excavation for catch / side water gutters in strata Cubic 1079.00 985.00
MORTH to the specified section including stacking the Meter
309 excavated stuff in a regular bund by chiselling and
wedging and disposing of unsuitable or excess
stuff as directed. Manjra Rock chiselling and
wedging etc. complete
Spec. No.: MORTH 309
12a / 23 Conveying materials obtained from road cutting Cubic 130.00 22.00
MORTH including all lifts, laying in layers of 20cm. to 30cm. Meter
305 (about 8 inch to 12 inch ) breaking clods, dressing
to the required lines, curves, grade and section,
watering and compaction to 95% of standard
proctor density for a lead of 50 to 300 m. inclusive
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
12b / 23 Conveying materials obtained from road cutting Cubic 158.00 22.00
MORTH including all lifts, laying in layers of 20cm to 30cm. Meter
305 breaking clods, dressing to the required lines,
curves, grades and section, watering and
compacting to 100% of standard Proctor density
for a lead of over 50m. to 300m. inclusive from the
site of excavation to the site of deposition as
directed.
Spec. No.: MORTH 305
13a / 23 Conveying materials obtained from road cutting Cubic 142.00 22.00
MORTH including all lifts, laying in layers of 20cm. to 30cm. Meter
305 breaking clods, dressing to the required lines,
curves, grades and section, watering and
compacting to 95% of standard proctor density for
a lead of 300m. to 500m. inclusive from the site of
excavation to the site of deposition as directed.
Spec. No.: MORTH 305
13b / 23 Conveying materials obtained from road cutting Cubic 169.00 24.00
MORTH including all lifts, laying in layers of 20cm. to 30cm. Meter
305 breaking clods, dressing to the required lines,
curves, grades and section, watering and
compacting to 100% of standard proctor density
for a lead of 300m. to 500m. inclusive, from the
site of excavation to the site of deposition as
directed.
Spec. No.: MORTH 305
19a / 23 Conveying materials obtained from road cutting Cubic 33.00 15.00
MORTH including all lifts, laying in layers, breaking clods, Meter
305 dressing to the required lines, curves, grades and
section for a lead of over 50m. to 300m. from the
site of excavation to the site of deposition as
directed.
Spec. No.: MORTH 305
19b / 23 Conveying materials obtained from road cutting Cubic 38.00 14.00
MORTH including all lifts, laying in layers, breaking clods, Meter
305 dressing to the required lines, curves, grades and
section for a lead of over 300m.to 500m from the
site of excavation to the site of deposition as
directed.
Spec. No.: MORTH 305
20 / 23 Supplying hard murum/ kankar at the quarry site, Cubic 207.00 78.00
MORTH including conveying and stacking complete. Meter
408 Spec. No.: MORTH 408
22 / 23 Spreading hard murum for side width complete Cubic 39.00 39.00
MORTH Spec. No.: MORTH 408 Meter
408
23a / 23 Picking the road surface including sectioning Square 12.00 12.00
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
23b / 23 Picking the road surface including sectioning Square 17.00 17.00
MORTH complete (BT surface.) Meter
501 Spec. No.: MORTH 501
24 / 23 Compacting the hard murum side widths layers on Square 5.00 1.00
MORTH each side with power roller including artificial Meter
408 watering complete.
Spec. No.: MORTH 408
25A / 23 Providing and fixing trap/ granite/ quartzite/ gneiss Number 495.00 110.00
MORTH guard stone/ indicator stones/ boundary stones of
807 standard size and shape including fixing in block
of standard size of cement concrete 1:4:8 white
washing etc.complete
Spec. No.: MORTH 807
25B / 23 Providing and fixing trap /granite/ quartzite/ Number 162.00 81.00
MORTH gneiss/ guard stone/ indicator stones/ boundry
807 stones of standard size & shape including fixing In
ground and white washing complete
Spec. No.: MORTH 807
26 / 23 Providing and fixing M-15 R.C.C. guard stone/ Number 501.00 89.00
MORTH indicator stones/ boundary stones of standard size
807 and shape including fixing in C.C. 1:4:8 and white
washing etc. complete.
Spec. No.: MORTH 807
27 / 23 Providing dry rubble stone pitching 23cm. (about 9 Square 225.00 125.00
MORTH inch) thick. Meter
306 Spec. No.: MORTH 306
30 / 23 Providing and fixing R.C.C. 200 metre stones as Number 598.00 166.00
MORTH per I.R.C. standard including fixing in standard
805 size C.C.1:4:8 block curing complete painting
lettering etc. complete.
Spec. No.: MORTH 805
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
31 / 23 Providing and fixing R.C.C. 5th Km. stones, on Number 2621.00 287.00
MORTH N.H./ S.H./ M.D.R. etc. including painting,
805 numbering etc complete as per IRC design for
highway km. stones and fixing in std. size c.c.
1:4:8 block complete.
Spec. No.: MORTH 805
32 / 23 Providing & fixing R.C.C. 1:2:4 ordinary km. Number 2136.00 252.00
MORTH stones including painting numbering etc. complete
805 for N.H./ S.H./ M.D.R. etc. as per IRC design for
highway km stone and fixing in standard size C.C.
1:4:8 block complete.
Spec. No.: MORTH 805
36A / 23 Providing and fixing cautionary / warning sign Number 2537.00 485.00
MORTH board of size 90 cm. having shape of equilateral
801 triangle with apex point upwards. Prepared on 16
gauge M.S. sheet including painting with one coat
of zinc cromate stoving primer and two coats each
of white back ground, red border and backside
gray stove enamelled, bonded with cut out of
Retro reflective sheet Engineering grade, symbol /
letters / numerals / border arrow, coated with non
pealable crystal clear protective transparent coat
retaining 100% reflection including one number of
M.S. Angle iron post of size 50 x 50 x 5 mm of
3.65 m. long inflated at bottom drilled on top in
one piece without joint painted with white and
black bands of 30 cm. fixing board and post with 2
Nos. high strength G.I. bolts and nuts of size 10
mm dia. 20 mm long including all taxes,
conveying, fixing in ground with cement concrete
1:4:8 block of 60 cm x 60 cm x 75 cm size etc.
complete.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
36B / 23 Providing and fixing cautionary / warning sign Number 2089.00 485.00
MORTH board of size 60 cm. having shape of equilateral
801 triangle with apex point upwards. prepared on 16
gauge M.S. sheet including painting with one coat
of zinc cromate stoving primer and two coats each
of white back ground, red border and backside
gray stove enamelled, bonded with cut out of
Retro reflective sheet Engineering grade, symbol /
letters / numerals / border / arrow, coated with non
pealable crystal clear protective transparent coat
retaining 100% reflection including one number of
M.S. Angle iron post of size 50 x 50 x 5 mm of
3.65 m. long inflated at bottom drilled on top in
one piece without joint painted with white and
black bands of 30 cm. fixing board and post with 2
Nos. high strength G.I. bolts and nuts of size 10
mm dia. and 20 mm long including all taxes,
conveying, fixing in ground with cement concrete
1:4:8 block of 60 cm x 60 cm x 75 cm size
etc.complete
Spec. No.: MORTH 801 I.R.C. : 67-1977
38 / 23 Providing and fixing N.H./ S.H. Route Marker size Number 2555.00 485.00
MORTH 60 cm x 45 cm with one No. direction plate of size
801 30 cm x 25 cm prepared on 16 gauge M.S. sheet
including painting with one coat of zinc cromate
stoving primer and two coats each of white and
green back ground and back side gray stove
enamelled, bonded with cut out of red Retro
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
44A / 23 Painting with approved enamel paint in two coats Number 64.00 28.00
MORTH including cleaning surface and lettering for
801 cautionary/ mandatory sign boards and village
name boards complete.
Spec. No.: MORTH 801
44B / 23 Painting with approved enamel paint in two coats Number 65.00 30.00
MORTH including cleaning surface and lettering for
801 informatory sign boards complete.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
44C / 23 Painting with approved enamel paint in two coats Number 10.00 4.00
MORTH including cleaning surface and lettering on
801 masonry works with nalla flow direction, span
number and location complete.
Spec. No.: MORTH 801
44D / 23 Painting with approved enamel paint in two coats Number 256.00 83.00
MORTH including cleaning surface and lettering for fifth
801 k.m. stone complete.
Spec. No.: MORTH 801
44E / 23 Painting with approved enamel paint in two coats Number 201.00 76.00
MORTH including cleaning surface and lettering for
801 ordinary kilometre stone complete.
Spec. No.: MORTH 801
44F / 23 Painting with approved enamel paint in two coats Number 61.00 18.00
MORTH including cleaning surface and lettering for two
801 hundred metre stone complete.
Spec. No.: MORTH 801
44G / 23 Painting with approved enamel paint in two coats Number 20.00 9.00
MORTH including cleaning surface and lettering for
801 boundary stones complete.
Spec. No.: MORTH 801
45 / 23 Providing white & colour washing to road side Number 11.00 7.00
MORTH trees in 2 coats in 2 bands of white and one red
100 band at centre of 30 cm height each including
preparing the surface, cost of material, conveying
etc. complete.
Spec. No.: MORTH 100
46 / 23 Labour for breaking trap stone rubble (Rawali) into Cubic 145.00 145.00
MORTH metal of suitable size conveying by head load Meter
400 feeding crusher, stacking the chips, refeeding the
crusher with oversize metal to obtain chips of
20mm size and below including labour for
machinery (Measurements shall be on stacked
screened chips only)
Spec. No.: MORTH 400
49A / 23 Providing and casting in situ or precast tapering Running 514.00 105.00
MORTH R.C.C. 1:2:4 Kerbs type-II as per Drg. No. 13 dt. Meter
409 20-4-79, tapering (9 inch x 6 inch) both side
embedded 6 inch below ground level finished
neatly with C.M. 1:2 with 4 Nos. 6mm and bars
6mm and strips at 18 inch C/c setting the same in
C.M. 1:2, painting the exposed surface of the
kerbs with 2 coats of road marking paint of
approved quality and colour including the required
excavation in any strata and removing the
excavated stuff any where in city and redoing the
surface as specified and directed for single line
dividers.
Spec. No.: MORTH 409
49B / 23 Providing and casting in situ or precast tapering Running 669.00 139.00
MORTH R.C.C. 1:2:4 Kerbs type-III as per Drg. No. 13 dt. Meter
409 20-4-79, tapering (9 inch x 6 inch ) both side
embedded 6 inch below ground level finished
neatly with C.M. 1:2 with 4 Nos. 6mm dia. bars
and 6mm dia. strips at 18 inch C/c setting the
same in C.M. 1:2, painting the exposed surface of
the kerbs with 2 coats of road marking paint of
approved quality and colour including the required
excavated stuff any where in city and redoing the
surface as specified and directed for single line
dividers.
Spec. No.: MORTH 409
57A / 23 Providing and fixing sign boards of size 90cm Number 5182.00 485.00
MORTH having shape of an equilators triangle made out of
801 14 guage sheet with retro reflective sheeting of
high intensity grade as per M.O.T. specification
No. 801-3(1993) white reflective back ground,
lettering symbol bordering of black non reflective
paint including 3.45 metre long M.S. angle one
post of 50mm x 50mm x 5mm size duly painted
with white and black bands including fixing the
boards of M.S. angle with galvanised nuts and
bolts and washer. The Board shall be as per IRC-
67-1977 including conveying fixing in ground with
C.C. 1:4:8 block of size 0.60 x 0.60 x 0.75 m, with
7 year guarantee for the sheeting etc. complete.
A) Alluminium Board
Spec. No.: MORTH 801 IRC-67:1977 and As
directed by Engineer in charge
57B / 23 Providing and fixing sign boards of size 90cm Number 3691.00 485.00
MORTH having shape of an equilateral triangle made out
801 of 14 gauge sheet with retro reflective sheeting of
high intensity grade as per M.O.T. specification
No. 801-3(1993) white reflective back ground,
lettering symbol bordering of black non reflective
paint including 3.45 metre long M.S. angle one
post of 50mm x 50mm x 5mm size duly painted
with white and black bands including fixing the
boards of M.S. angle with galvanised nuts and
bolts and washer. The Board shall be as per IRC-
67-1977 including conveying fixing in ground with
C.C. 1:4:8 block of size 0.60 x 0.60 x 0.75 m, with
7 year guarantee for the sheeting etc. complete.
B) Mild Steel Board / Vitrous Enamelled
Spec. No.: MORTH 801 IRC-67:1977 and As
directed by Engineer in charge
58 / 23 Providing and fixing sign boards of 1.80m x 1.20m Square 14194.00 485.00
MORTH size or other suitable similar size made out of 14 Meter
801 guage Alluminium sheet with retro reflective
sheeting of high intensity grade as per M.O.T.
specification No. 801-3 (1993) with white reflective
back ground lettering symbol figuring bordering of
black non reflective paint including 3.45m long
M.S. angle two posts 50mm x 50mm x 5mm size
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
60 / 23 Design of overlay for existing B.T. surface with Kilometer 6750.00 0.00
MORTH carrying out testing by Benkelman Beam method
as per guide lines in IRC 81:1997 including design
& testing at site. The charges for transportation of
Benkelman Beam, loaded truck labour for testing
and traffic control are not included.
Spec. No.: As directed by Engineer in charge.
61A i / 23 Providing and fixing with apex point upward Number 7329.00 1200.00
MORTH prepared on fibre reinforced plate 3.0 milimeter
801 thick bonded with white retroreflective sheeting on
Engineering grade having pressure sensitive/ heat
activated adhesive retoreflective white back
ground and red border and back side gray
retoreflctive symbols, letters, numerals, arrows,
one M.S. angle post of 65 x 65 x 6 milimetre size
and 3.65 metre long inflated bottom and drilled on
top and painting posts with white and black border
of 25 centimetres, fitting board to post with 2
numbers of strong G.I. bolts and nuts including
transportation and fixing in p.c.c.1:4:8 etc.
complete. ( The work to be executed with prior
approval of Superintending Engineer) a) i)
Cautionary sign boards 90 cm equilateral trinlgle.
Spec. No.: MORTH 801 IRC 57 of 2001
61A ii / 23 Providing and fixing with apex point upward Number 8792.00 1265.00
MORTH prepared on fibre reinforced plate 3.0 milimeter
801 thick bonded with white retroreflective sheeting on
Engineering grade having pressure sensitive/heat
activated adhesive retoreflective white back
ground and red border and back side gray
retoreflctive symbols, letters, numerals, arrows,
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
61B i / 23 Providing and fixing with apex point upward Number 9524.00 1310.00
MORTH prepared on fibre reinforced plate 3.0 milimeter
801 thick bonded with white retroreflective sheeting on
Engineering grade having pressure sensitive/heat
activated adhesive retoreflective white back
ground and red border and back side gray
retoreflctive symbols, letters, numerals, arrows,
one M.S. angle post of 65 x 65 x 6 milimetre size
and 3.65 metre long inflated bottom and drilled on
top and painting posts with white and black border
of 25 centimetres, fitting board to post with 2
numbers of strong G.I. bolts and nuts including
transportation and fixing in p.c.c.1:4:8 etc.
complete. ( The work to be executed with prior
approval of Superintending Engineer) b) i)
Informatory sign boards of size 60 x 80 cm
Spec. No.: MORTH 801 IRC 57 of 2001
61B ii / 23 Providing and fixing with apex point upward Number 11215.00 1425.00
MORTH prepared on fibre reinforced plate 3.0 milimeter
801 thick bonded with white retroreflective sheeting on
Engineering grade having pressure sensitive/heat
activated adhesive retoreflective white back
ground and red border and back side gray
retoreflctive symbols, letters, numerals, arrows,
one M.S. angle post of 65 x 65 x 6 milimetre size
and 3.65 metre long inflated bottom and drilled on
top and painting posts with white and black border
of 25 centimetres, fitting board to post with 2
numbers of strong G.I. bolts and nuts including
transportation and fixing in p.c.c.1:4:8 etc.
complete. ( The work to be executed with prior
approval of Superintending Engineer) b) ) i)
Informatory sign boards of size 60 x 80 cm High
intensity grade.
Spec. No.: MORTH 801 IRC 57 of 2001
61C i / 23 Providing and fixing with apex point upward Number 6234.00 1080.00
MORTH prepared on fibre reinforced plate 3.0 milimeter
801 thick bonded with white retroreflective sheeting on
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
61C ii / 23 Providing and fixing with apex point upward Number 7297.00 1165.00
MORTH prepared on fibre reinforced plate 3.0 milimeter
801 thick bonded with white retroreflective sheeting on
Engineering grade having pressure sensitive/heat
activated adhesive retoreflective white back
ground and red border and back side gray
retoreflctive symbols, letters, numerals, arrows,
one M.S. angle post of 65 x 65 x 6 milimetre size
and 3.65 metre long inflated bottom and drilled on
top and painting posts with white and black border
of 25 centimetres, fitting board to post with 2
numbes of strong G.I. bolts and nuts including
transportation and fixing in p.c.c.1:4:8 etc.
complete. ( The work to be executed with prior
approval of Superintending Engineer) c) i)
Prohibitory sign boards having size 60 cm circular
High intensity grade.
Spec. No.: MORTH 801 IRC 57 of 2001
62i a / 23 Providing and fixing road junction/information sign Number 17801.00 2030.00
MORTH boards of size 1.20 x 0.90 Meter Prepared fiber
801 reinforced plate 4.0 millimeter thick on frame of 40
x 40 mm angle with support of 40 mm M.S. Patti of
6.00 mm thick for strengthening including bonded
retro reflective sheeting of Engineering grade
having pressure sensitive/heat activated adhesive
retro reflective with as per directed colour with
retro reflective symbols, letter, numbers, arrows
with two M.S angle post of 65 x 65 x 6 mm size
and 3.65 meter long in one piece without joint
inflow at bottom and filled on top with tracing of 40
x 40 x 5 mm M.S. angle and painting with white
and black border of 25 mm, fixing boards on post
with including transportation fixing in 1:4:8 cement
concrete block of 60 x 60 x 75 cm size at site and
complete. (The work to be executed with prior
approval of Superintending Engineer).
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
62i b / 23 Providing and fixing road junction/information sign Number 20342.00 2280.00
MORTH boards of size 1.20 x 0.90 Meter High Intensity
801 grade Prepared fiber reinforced plate 4.0
millimeter thick on frame of 40 x 40 mm angle with
support of 40 mm M.S. Patti of 6.00 mm thick for
strengthening including bonded retro reflective
sheeting of Engineering grade having pressure
sensitive/heat activated adhesive retro reflective
with as per directed colour with retro reflective
symbols, letter, numbers, arrows with two M.S
angle post of 65 x 65 x 6 mm size and 3.65 meter
long in one piece without joint inflow at bottom and
filled on top with tracing of 40 x 40 x 5 mm M.S.
angle and painting with white and black border of
25 mm, fixing boards on post with including
transportation fixing in 1:4:8 cement concrete
block of 60 x 60 x 75 cm size at site and complete.
(The work to be executed with prior approval of
Superintending Engineer).
Spec. No.: MORTH 801 IRC 67 of 2001
62ii a / 23 Providing and fixing road junction/information sign Number 38045.00 3490.00
MORTH boards of size 1.80 x 0.90 Meter Prepared fiber
801 reinforced plate 4.0 millimeter thick on frame of 40
x 40 mm angle with support of 40 mm M.S. Patti of
6.00 mm thick for strengthening including bonded
retro reflective sheeting of Engineering grade
having pressure sensitive/heat activated adhesive
retro reflective with as per directed colour with
retro reflective symbols, letter, numbers, arrows
with two M.S angle post of 65 x 65 x 6 mm size
and 3.65 meter long in one piece without joint
inflow at bottom and filled on top with tracing of 40
x 40 x 5 mm M.S. angle and painting with white
and black border of 25 mm, fixing boards on post
with including transportation fixing in 1:4:8 cement
concrete block of 60 x 60 x 75 cm size at site and
complete. (The work to be executed with prior
approval of Superintending Engineer).
Spec. No.: MORTH 801 IRC 67 of 2001
62ii b / 23 Providing and fixing road junction/information sign Number 44820.00 3865.00
MORTH boards of size 1.80 x 0.90 Meter High Intensity
801 grade Prepared fiber reinforced plate 4.0
millimeter thick on frame of 40 x 40 mm angle with
support of 40 mm M.S. Patti of 6.00 mm thick for
strengthening including bonded retro reflective
sheeting of Engineering grade having pressure
sensitive/heat activated adhesive retro reflective
with as per directed colour with retro reflective
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
64a / 23 Providing and laying a fibre glass geogrid of Tech Square 136.00 27.00
MORTH fab India Type-50 manufactured from high quality Meter
701 glass fibre strands and coated with a polymer
modified bitumen as reinforcement to Asphalt
overlay flexible pavements and Asphalt over
distressed rigid P.C.C.
Spec. No.: MORTH 701
64b / 23 Providing and laying a fibre glass geogrid of Tech Square 221.00 48.00
MORTH fab India Type-100 manufactured from high quality Meter
701 glass fibre strands and coated with a polymer
modified bitumen as reinforcement to Asphalt
overlay flexible pavements and Asphalt over
distressed rigid P.C.C.
Spec. No.: MORTH 701
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
66a / 23 Providing and laying Tech fab India CE marked Square 106.00 20.00
MORTH Needle Punched and mechanically bonded non Meter
700 woven Geotextile indigenously manufactured from
high quality poly Propylene staple fibers
(continuous filament will not be accepted ) on the
prepared subgrade for Seperation.TFI-TECHGO =
PR-15
Spec. No.: MORTH 700
66b / 23 Providing and laying Tech fab India CE marked Square 121.00 22.00
MORTH Needle Punched and mechanically bonded non Meter
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
66c / 23 Providing and laying Techfab India CE marked Square 134.00 25.00
MORTH Needle Punched and mechanically bonded non Meter
700 woven Geotextile indigenously manufactured from
high quality poly Propylene staple
fibers(continuous filament will not be accepted )
on the prepared subgrade for Seperation.TFI-
TECHGO = PR-25
Spec. No.: MORTH 700
72a / 23 Scarifying the existing granular road surface to a Square 24.00 14.00
MORTH depth of 50 mm by manual means and disposal of Meter
305 scarified material within all lifts and leads upto
1000 metres.
Spec. No.: M.O.R.T & H - 305.4.3
72b / 23 Scarifying the existing bituminous road surface to Square 6.00 1.00
MORTH a depth of 50 mm by manual means and disposal Meter
305 of scarified material with in all lifts and lead upto
1000 metres.
Spec. No.: M.O.R.T & H - 305.4.3
75a / 23 Laying and spreading available soil in the sub- Cubic 574.00 11.00
MORTH grade on a prepared surface,pulverizing, mixing Meter
401 the spread soil in place with rotavator with 3 per
cent slaked lime having minimum content of 70
per cent of CaO, grading with motor grader and
compacting with the road roller at OMC to the
desired density to form a layer of improved sub
grade -- By Mechanical Means
Spec. No.: MORTH - 401
75b / 23 Laying and spreading available soil in the sub- Cubic 598.00 72.00
MORTH grade on a prepared surface, pulverizing, mixing Meter
401 the spread soil in place with rotavator with 3 per
cent slaked lime having minimum content of 70
per cent of CaO, grading with motor grader and
compacting with the road roller at OMC to the
desired density to form a layer of improved sub
grade -- By Manual Means
Spec. No.: MORTH - 401
80A i a / Providing, laying, spreading and compacting stone Cubic 1096.00 200.00
23 aggregates of specific sizes to water bound Meter
MORTH macadam specification including spreading in
404 uniform thickness, hand packing to proper grade
and camber, applying and brooming requisite type
of screening/ binding Materials to fill up the
interstices of coarse aggregate, watering and
compacting with Intelligent Compactor with
compaction analyzer and V-Sat attachment. to the
required density. By Manual Means Grading I a)
(Using Screening Crushable type such as Moorum
or Gravel)
Spec. No.: MORTH - 404
80A i b / Providing, laying, spreading and compacting stone Cubic 1275.00 210.00
23 aggregates of specific sizes to water bound Meter
MORTH macadam specification including spreading in
404 uniform thickness, hand packing, to proper grade
and camber, applying and brooming requisite type
of screening/ binding Materials to fill up the
interstices of coarse aggregate, watering and
compacting with Intelligent Compactor with
compaction analyzer and V-Sat attachment. to the
required density. By Manual Means Grading I b)
(Using Screening Type A (13.2 mm Aggregate)
Spec. No.: MORTH - 404
80A ii c / Providing, laying, spreading and compacting stone Cubic 1338.00 210.00
23 aggregates of specific sizes to water bound Meter
MORTH macadam specification including spreading in
404 uniform thickness, hand packing to proper grade
and camber, applying and brooming requisite type
of screening/ binding Materials to fill up the
interstices of coarse aggregate, watering and
compacting with Intelligent Compactor with
compaction analyzer and V-Sat attachment. to the
required density. By Manual Means Grading I c)
(Using Screening Type B (11.2 mm Aggregate)
Spec. No.: MORTH - 404
80A iii a / Providing, laying, spreading and compacting stone Cubic 1260.00 210.00
23 aggregates of specific sizes to water bound Meter
MORTH macadam specification including spreading in
404 uniform thickness, hand packing to proper grade
and camber, applying and brooming requisite type
of screening/ binding Materials to fill up the
interstices of coarse aggregate, watering and
compacting with Intelligent Compactor with
compaction analyzer and V-Sat attachment. to the
required density. By Manual Means Grading II a)
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
80A iii b / Providing, laying, spreading and compacting stone Cubic 1405.00 210.00
23 aggregates of specific sizes to water bound Meter
MORTH macadam specification including spreading in
404 uniform thickness, hand packing to proper grade
and camber, applying and brooming requisite type
of screening/ binding Materials to fill up the
interstices of coarse aggregate, watering and
compacting with Intelligent Compactor with
compaction analyzer and V-Sat attachment.to the
required density. By Manual Means Grading II b)
(Using Screening Type B (11.2 mm Aggregate)
Spec. No.: MORTH - 404
80B ii a / Providing, laying, spreading and compacting stone Cubic 963.00 14.00
23 aggregates of specific sizes to water bound Meter
MORTH macadam specification including spreading in
404 uniform thickness, hand packing to proper grade
and camber, applying and brooming requisite type
of screening/ binding Materials to fill up the
interstices of coarse aggregate, watering and
compacting with Intelligent Compactor with
compaction analyzer and V-Sat attachment.to the
required density. By Mechanical Means Grading I
a) (Using Screening Crushable type such as
Moorum or Gravel)
Spec. No.: MORTH - 404
80B ii b / Providing, laying, spreading and compacting stone Cubic 1089.00 14.00
23 aggregates of specific sizes to water bound Meter
MORTH macadam specification including spreading in
404 uniform thickness, hand packing to proper grade
and camber, applying and brooming requisite type
of screening/ binding Materials to fill up the
interstices of coarse aggregate, watering and
compacting with Intelligent Compactor with
compaction analyzer and V-Sat attachment. to the
required density. By Mechanical Means Grading I
b) (Using Screening Type A (13.2 mm Agr)
Spec. No.: MORTH - 404
80B ii c / Providing, laying, spreading and compacting stone Cubic 1152.00 14.00
23 aggregates of specific sizes to water bound Meter
MORTH macadam specification including spreading in
404 uniform thickness, hand packing to proper grade
and camber, applying and brooming requisite type
of screening/ binding Materials to fill up the
interstices of coarse aggregate, watering and
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
80B iii a / Providing, laying, spreading and compacting stone Cubic 1074.00 14.00
23 aggregates of specific sizes to water bound Meter
MORTH macadam specification including spreading in
404 uniform thickness, hand packing to proper grade
and camber, applying and brooming requisite type
of screening/ binding Materials to fill up the
interstices of coarse aggregate, watering and
compacting with Intelligent Compactor with
compaction analyzer and V-Sat attachment. to the
required density. By Mechanical Means Grading II
a) (Using Screening Crushable type such as
Moorum or Gravel)
Spec. No.: MORTH - 404
80B iii b / Providing, laying, spreading and compacting stone Cubic 1219.00 14.00
23 aggregates of specific sizes to water bound Meter
MORTH macadam specification including spreading in
404 uniform thickness, hand packing to proper grade
and camber, applying and brooming requisite type
of screening/ binding Materials to fill up the
interstices of coarse aggregate, watering and
compacting with Intelligent Compactor with
compaction analyzer and V-Sat attachment. to the
required density. By Mechanical Means Grading II
b) (Using Screening Type B (11.2 mm Aggregate)
Spec. No.: MORTH - 404
84 / 23 Construction of Median and Island with Soil Taken Cubic 221.00 82.00
MORTH from Roadway Cutting -- Construction of Median Meter
407 and Island above road level with approved
material deposited at site from roadway cutting
and excavation for drain and foundation of other
structures, spread, graded and compacted as per
clause 407
Spec. No.: MORTH - 407
85 / 23 Construction of Median and Island with Soil Taken Cubic 250.00 59.00
MORTH from Borrow Areas -- Construction of median and Meter
407 Island above road level with approved material
brought from borrow pits, spread, sloped and
compacted as per clause 407
Spec. No.: MORTH - 407
87A i / 23 Crusher Run Macadam Base -- Providing crushed Cubic 743.00 10.00
MORTH stone aggregate, depositing on a prepared surface Meter
410 by hauling vehicles, spreading and mixing with a
motor grader, watering and compacting with a
vibratory roller to clause 410 to form a layer of
sub-base/Base -- By Mix in Place Method for 53
mm maximum size
Spec. No.: MORTH - 410
87A ii / 23 Crusher Run Macadam Base -- Providing crushed Cubic 821.00 10.00
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
87B i / 23 Crusher Run Macadam Base -- Providing crushed Cubic 856.00 10.00
MORTH stone aggregate, depositing on a prepared surface Meter
410 by hauling vehicles, spreading and mixing with a
motor grader, watering and compacting with a
vibratory roller to clause 410 to form a layer of
sub-base/Base -- By Mixing Plant Method for 53
mm maximum size
Spec. No.: MORTH - 410
87B ii / 23 Crusher Run Macadam Base -- Providing crushed Cubic 592.00 10.00
MORTH stone aggregate, depositing on a prepared surface Meter
410 by hauling vehicles, spreading and mixing with a
motor grader, watering and compacting with a
vibratory roller to clause 410 to form a layer of
sub-base/Base -- By Mixing Plant Method for 45
mm maximum size
Spec. No.: MORTH - 410
89 / 23 Prime coat (Providing and applying primer coat Square 36.00 0.20
MORTH with bitumen emulsion on prepared surface of Meter
502 granular Base including clearing of road surface
and spraying, primer at the rate of 0.60 kg/sqm
using mechanical means. )
Spec. No.: M.O.R.T & H - 502
90a / 23 Providing and applying tack coat on the prepared Square 14.00 0.20
MORTH surface heating by flames in Boiler and spraying Meter
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
90b / 23 Providing and applying tack coat on the prepared Square 17.00 0.20
MORTH surface heating by flames in Boiler and spraying Meter
503 bitumen with sprayer on B.T./ Granular surface
2.5 kg/10 sqm. VG-30 bulk
Spec. No.: M.O.R.T & H - 503
90c / 23 Providing and applying tack coat on the prepared Square 20.00 0.20
MORTH surface heating by flames in Boiler and spraying Meter
503 bitumen with sprayer on B.T./ Concrete / Granular
surface with primer @ 3. kg/10 sqm with VG-30
bulk Bitumen
Spec. No.: M.O.R.T & H - 503
90d / 23 Providing and applying tack coat on the prepared Square 23.00 0.20
MORTH surface heating by flames in Boiler and spraying Meter
503 bitumen with sprayer on Concrete. surface with
primer @ 3.50 kg/10 sqm with VG-30 bulk
Bitumen
Spec. No.: M.O.R.T & H - 503
90e / 23 Providing and applying tack coat with bitumen Square 13.00 0.20
MORTH emulsion using emulsion pressure distributer at Meter
503 the rate of 0.20 kg per Sq.Mt. on the prepared
bituminous / granular surface cleaned with
mechanical broom.
Spec. No.: M.O.R.T & H - 503
94a i / 23 Surface Dressing -- Providing and laying surface Square 91.00 1.00
MORTH dressing as wearing course in single coat using Meter
509 crushed stone aggregates of specified size on a
layer of bituminous binder laid on prepared
surface and rolling with 8-10 tonne smooth
wheeled steel roller. -- a) 19 mm nominal chippling
size (bitumen 12.00 kg/10 Sq.Mt.) -- Bitumen VG-
30 bulk
Spec. No.: Spec. No.: As per MORTH
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
94b i / 23 Surface Dressing -- Providing and laying surface Square 75.00 1.00
MORTH dressing as wearing course in single coat using Meter
509 crushed stone aggregates of specified size on a
layer of bituminous binder laid on prepared
surface and rolling with 8-10 tonne smooth
wheeled steel roller. -- b) 13 mm nominal chippling
size (bitumen 10.00 kg/10 Sq.Mt -- Bitumen VG-30
bulk
Spec. No.: Spec. No.: As per MORTH
specification Fifth Edition Clause No.509
95a / 23 Open Graded Premix Surfacing- Providing and Square 206.00 1.00
MORTH Laying OGC 20 mm thickness composed of 13.2 Meter
510 mm to 5.6 mm aggregates premixed with
bituminous binder transported to site with VTS ,
laid over a previously prepared surface, finished to
the required grade, level, alignment, and rolling to
achieve the desired compaction VG-30 Bitumen,
including providing and laying seal coat sealing
voids in a bituminious surface laid to the specified
level and cross fall using Type‖A‖seal coat but
excluding prime / tack coat. For Bitumen VG-30
bulk--USING drum mix type hot mix plant with
SCADA Ordinary Paver, with Vibratory roller
Spec. No.: As per MORTH specification Fifth
Edition Clause No.510
95b / 23 Open Graded Premix Surfacing- Providing and Square 209.00 1.00
MORTH Laying OGC 20 mm thickness composed of 13.2 Meter
510 mm to 5.6 mm aggregates premixed with
bituminous binder transported to site with VTS ,
laid over a previously prepared surface, finished to
the required grade, level, alignment, and rolling to
achieve the desired compaction VG-30 Bitumen,
including providing and laying seal coat sealing
voids in a bituminious surface laid to the specified
level and cross fall using Type‖A‖seal coat but
excluding prime / tack coat. For Bitumen VG-30
bulk -- USING 80 TPH Batch mix type hot mix
plant with SCADA, Ordinary Paver with Vibratory
roller.
Spec. No.: As per MORTH specification Fifth
Edition Clause No.510
95c / 23 Open Graded Premix Surfacing- Providing and Square 210.00 1.00
MORTH Laying OGC 20 mm thickness composed of 13.2 Meter
510 mm to 5.6 mm aggregates premixed with
bituminous binder transported to site with VTS ,
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
96a / 23 Closed Graded Premix Surfacing- Providing and Square 165.00 1.00
MORTH Laying CGC 20 mm thickness composed of 13.2 Meter
508 mm to 0.09 mm aggregates Type B premixed with
bituminous binder @ 19 kg/10 sqmt transported to
site with VTS , laid over a previously prepared
surface, finished to the required grade, level,
alignment, and rolling to achieve the desired
compaction VG-30 Bitumen,Excluding prime /
tack coat. For Bitumen VG-30 bulk -- USING 80
TPH Batch mix type hot mix plant with SCADA,
Sensor Paver, Intelligent Compactor with
compaction analyzer and V-Sat attachment.
Spec. No.:
Spec. No.: As per MORTH specification Fifth
Edition Clause No.508 and IRC-SP-97-2013
96b / 23 Closed Graded Premix Surfacing- Providing and Square 185.00 1.00
MORTH Laying CGC 20 mm thickness composed of 11.2 Meter
508 mm to 0.09 mm aggregates Type A premixed with
bituminous binder @ 22 kg/10 sqmt transported to
site with VTS , laid over a previously prepared
surface, finished to the required grade, level,
alignment, and rolling to achieve the desired
compaction VG-30 Bitumen,Excluding prime /
tack coat. For Bitumen VG-30 bulk -- USING 80
TPH Batch mix type hot mix plant with SCADA,
Sensor Paver, Intelligent Compactor with
compaction analyzer and V-Sat attachment.
Spec. No.: As per MORTH specification Fifth
Edition Clause No.508 and IRC-SP-97-2013
97a i / 23 Seal Coat (Providing and laying seal coat seeling Square 71.00 7.00
MORTH the voids in a bituminous surface laid to the Meter
513 specified level and cross fall using Type A seal
coats using 60/70 bulk
Spec. No.: M.O.R.T & H - 513
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
97b i / 23 Seal Coat -- Providing and laying of premix sand Square 50.00 6.00
MORTH seal coat with HMP of appropriate capacity not Meter
513 less than 75 tonnes / hour using crushed stone
chipping 6.7 mm size and penetration bitumen of
suitable grade. Type B seal coats using Bitumen
VG-30 bulk
Spec. No.: M.O.R.T & H - 513
98i / 23 Painting Line, Dashes, Arrows etc on Roads in Square 109.00 64.00
MORTH two coats on new work with ready mixed road Meter
803 marking paint confirming to I.S. 164 on Bituminous
surface including cleaning the surface of all dirt,
dust and other foreign matter, demarcation at site
and traffic control (Over 10cm wide) (MORTH-
803) -- New Surface
Spec. No.: MORTH-803
98ii / 23 Painting Line, Dashes, Arrows etc on Roads in Square 97.00 53.00
MORTH two coats on new work with ready mixed road Meter
803 marking paint confirming to I.S. 164 on Bituminous
surface including cleaning the surface of all dirt,
dust and other foreign matter, demarcation at site
and traffic control (Upto 10cm wide) (MORTH-
803) -- New Surface
Spec. No.: MORTH-803
99i / 23 Painting Line, Dashes, Arrows etc on Roads in Square 76.00 47.00
MORTH two coats on new work with ready mixed road Meter
803 marking paint confirming to I.S. 164 on Bituminous
surface including cleaning the surface of all dirt,
dust and other foreign matter, demarcation at site
and traffic control (Over 10cm wide) (MORTH-
803) -- Old Surface
Spec. No.: MORTH-803
99ii / 23 Painting Line, Dashes, Arrows etc on Roads in Square 81.00 53.00
MORTH two coats on new work with ready mixed road Meter
803 marking paint confirming to I.S. 164 on Bituminous
surface including cleaning the surface of all dirt,
dust and other foreign matter, demarcation at site
and traffic control (Upto 10cm wide) (MORTH-
803) -- Old Surface
Spec. No.: MORTH-803
101a / 23 Metal Beam Crash Barrier -- Type - A, W : Metal Running 2784.00 113.00
MORTH Beam Crash Barrier (Providing and erecting a W Meter
810 metal beam crash barrier comprising of 3 mm
thick corrugated sheet metal beam rail, 70 cm
above road/ground level, fixed on ISMC series
channel vertical post, 150 x 75 x 5 mm spaced 2
m centre to centre, 1.8 m high, 1.1 m below
ground/road level, all steel parts and fitments to be
galvanised by hot dip process, all fittings to
conform to IS:1367 and IS:1364, metal beam rail
to be fixed on the vertical post with a spacer of
channel section 150 x 75 x 5 mm, 330 mm long
complete as per clause 810)
Spec. No.: MORTH-810
101b / 23 Metal Beam Crash Barrier -- Type - B, THRIE : Running 3882.00 113.00
MORTH Metal Beam Crash Barrier (Providing and erecting Meter
810 a Thrie metal beam crash barrier comprising of 3
mm thick corrugated sheet metal beam rail, 85 cm
above road/ground level, fixed on ISMC series
channel vertical post, 150 x 75 x 5 mm spaced 2
m centre to centre, 2 m high with 1.15 m below
ground level, all steel parts and fitments to be
galvanised by hot dip process, all fittings to
conform to IS:1367 and IS:1364, metal beam rail
to be fixed on the vertical post with a space of
channel section 150 x 75 x 5 mm, 546 mm long
complete as per clause 810)
Spec. No.: MORTH-810
102 / 23 Flexible Crash Barrier, Wire Rope Safety Barrier Running 2037.00 368.00
MORTH (Providing and erecting a wire rope safety barrier Meter
810 with vertical posts of medium weight RS Joist
(ISMB series) 100 mm x 75 mm (11.50 kg/m),
1.50 m long 0.85 m above ground and 0.65 m
below ground level, split at the bottom for better
grip, embedded in M 15 grade cement concrete
450 x 450 x 450 mm, 1.50 m center to center and
with 4 horizontal steel wire rope 40 mm dia and
anchored at terminal posts 15 m apart. Terminal
post to be embedded in M 15 grade cement
concrete foundation 2400 x 450 x 900 mm (depth),
strengthened by a strut of RS joist 100 x 75 mm, 2
m long at 450 inclination and a tie 100 x 8 mm,
1.50 m long at the bottom, all embedded in
foundation concrete as per approved design and
drawing, rate excluding excavation and cement
concrete.)
Spec. No.: MORTH-810
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
103a / 23 Anti - Glare Screen with 25 mm steel pipe Running 3008.00 433.00
MORTH framework fixed with circular and rectangular vans Meter
(Providing and erecting an anti - glare screen with
25 mm dia vertical pipes fabricated and framed in
the form of panels of one metre length and 1.75
mtr height fixed with circular vane 250 mm dia at
top and rectangular vane 600 x 300 mm at the
middle, made out of steel sheet of 3 mm
thickness, end vertical pipes of the panel made
larger for embedding in foundation concrete,
applying 2 coats of paint on all exposed surfaces,
all as per approved design and drawings.)
Spec. No.: As directed
103b / 23 Anti - Glare Screen with Rectangular Vane of MS Running 827.00 165.00
MORTH sheet (Providing and erecting anti - glare screen Meter
with rectangular vanes of size 750 x 500 mm
made from MS sheet, 3 mm thick and fixed on MS
angle 50 x 50 x 6 mm at an angle of 450 to the
direction of flow of traffic, 1.5 m center to center,
top edge of the screen 1.75 m above ground level,
vertical post firmly embedded in cement concrete
foundation 0.60 m below ground level, applying 2
coats of paint on exposed faces, all complete as
per approved design and drawings)
Spec. No.: As directed
104 / 23 Road Marking with Hot Applied Thermoplastic Square 639.00 159.00
MORTH Compound with Reflectorizing Glass Beads on Meter
Bituminous Surface (Providing and laying of hot
applied thermoplastic compound 2.5 mm thick
including reflectorizing glass beads @ 250 gms
per sqm area, thickness of 2.5 mm is exclusive of
surface applied glass beads as per IRC:35 .The
finished surface to be level, uniform and free from
streaks and holes.)
Spec. No.: As directed
9 / 24 Providing and fixing 25mm dia. Steel anchor dowel Number 1303.00 341.00
BR 3G in hard rock including drilling hole of 32 mm dia. up
to 0.75 mtrs depth,. placing the dowel in position
and effectively grouting the hole with C.M. 1:1
proportion etc. complete.
Spec. No.: As directed by Engineer in charge.
11a / 24 Dewatering on BHP basis by using water pump Hour 85.00 8.00
BR 4 B including diversion of stream, providing coffer dams,
earthern bunds etc. as may be necessary for
foundation and other parts of the the works and
pumping out water during and after excavation as
may be required. a) By using 3.0 BHP Pump
Spec. No.: BR 4 Page No 104.105
12a / 24 Providing & laying in situ M-10 cement concrete of Cubic 3797.00 794.00
BR 5A trap/ granite/ quartzite/ gneiss metal in foundation Meter
including necessary bailing out water, compacting
and curing. (including formwork, centering.) (Cement
4.05 bags/Cu.Mt.) with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.With natural sand.
Spec. No.: BR.5 Page No. 105 and B.7, Page No.
38
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
12b / 24 Providing & laying in situ M-10 cement concrete of Cubic 3715.00 794.00
BR 5A trap/ granite/ quartzite/ gneiss metal in foundation Meter
including necessary bailing out water, compacting
and curing. (including formwork, centering.) (Cement
4.05 bags/Cu.Mt.) with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.With crushed sand.
Spec. No.: BR.5 Page No. 105 and B-7 / Page No.
38
15a / 24 Providing & laying in situ M-10 c.c. of trap/ granite/ Cubic 3943.00 780.00
BR 9A quartzite/ gneiss metal in the hollow of the steel Meter
curbs including compacting by vibrating and curing
complete. (Cement 4.05 bags/Cu.Mt.) with fully
automatic micro processor based PLC with SCADA
enabled with reversible Drum Type mixer. With
natural sand .
Spec. No.: BR.9 Page No. 109 and B.7, Page No.38
15b / 24 Providing & laying in situ M-10 c.c. of trap/ granite/ Cubic 3861.00 780.00
BR 9A quartzite/ gneiss metal in the hollow of the steel Meter
curbs including compacting by vibrating and curing
complete. (Cement 4.05 bags/Cu.Mt.) with fully
automatic micro processor based PLC with SCADA
enabled with reversible Drum Type mixer. With
crushed sand.
Spec. No.: BR.9 Page No. 109 And B 7 /Page No.
38
16 / 24 Providing, fabricating & setting out Mild Steel cutting Metric 63883.00 4953.00
BR 10 edges for R.C.C well curbs as shown on the detailed Tonne
drawings. etc. complete.
Spec. No.: BR.10 Page No. 110
17A a i / Providing and laying in situ M-20 R.C.C. of trap/ Cubic 4945.00 644.00
24 granite/ quartzite/ gneiss metal in well steining Meter
BR 13A including, compacting by vibrating, finishing and
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
17A a ii / Providing and laying in situ M-20 R.C.C. of trap/ Cubic 4859.00 644.00
24 granite/ quartzite/ gneiss metal in well steining Meter
BR 13A including, compacting by vibrating, finishing and
curing complete. (Excluding reinforce-ment and
including shuttering.) (Cement 6.90 bags/Cu.Mt.)
with fully automatic micro processor based PLC with
SCADA enabled with reversible Drum Type
mixer.With crushed sand.
Spec. No.: BR.13 Page No. 112 And B 7 /Page No.
38
17A b i / Providing and laying in situ M-25 R.C.C. of trap/ Cubic 5633.00 644.00
24 granite/ quartzite/ gneiss metal in well steining Meter
BR 13A including compacting by vibrating, finishing and
curing complete. (Excluding reinforcement and
including shuttering.) (Cement 8.50 bags/Cu.Mt.)
with fully automatic micro processor based PLC with
SCADA enabled with reversible Drum Type mixer.
With natural sand .
Spec. No.: BR.13 Page No. 112 and B. 7, Page
No.38
17A b ii / Providing and laying in situ M-25 R.C.C. of trap/ Cubic 5553.00 644.00
24 granite/ quartzite/ gneiss metal in well steining Meter
BR 13A including compacting by vibrating, finishing and
curing complete. (Excluding reinforcement and
including shuttering.) (Cement 8.50 bags/Cu.Mt.)
with fully automatic micro processor based PLC with
SCADA enabled with reversible Drum Type mixer.
With crushed sand.
Spec. No.: BR.13 Page No. 112 And B 7 /Page No.
38
17B a i / Providing and laying in situ M-20 R.C.C. of trap/ Cubic 5515.00 644.00
24 granite/ quartzite/ gneiss metal in well steining Meter
BR including, compacting by vibrating, finishing and
curing complete. (Excluding reinforcement and
including shuttering.) (Cement 6.90 bags/Cu.Mt.)
With Fully Automatic Micro Processor based PLC
with SCADA enabled concrete Batch Mix Plant
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
17B a ii / Providing and laying in situ M-20 R.C.C. of trap/ Cubic 5398.00 644.00
24 granite/ quartzite/ gneiss metal in well steining Meter
BR including, compacting by vibrating, finishing and
curing complete. (Excluding reinforcement and
including shuttering.) (Cement 6.90 bags/Cu.Mt.)
With Fully Automatic Micro Processor based PLC
with SCADA enabled concrete Batch Mix Plant
(PAN Mixer).With crushed sand.
Spec. No.: BR.5 Page No. 105
17B b i / Providing and laying in situ M-25 R.C.C. of trap/ Cubic 6087.00 644.00
24 granite/ quartzite/ gneiss metal in well steining Meter
BR including compacting by vibrating, finishing and
curing complete. (Excluding reinforcement and
including shuttering.) (Cement 8.50 bags/Cu.Mt.)
With Fully Automatic Micro Processor based PLC
with SCADA enabled concrete Batch Mix Plant
(PAN Mixer). With natural sand .
Spec. No.: BR.13 Page No. 112 and B. 7, Page
No.38
17B b ii / Providing and laying in situ M-25 R.C.C. of trap/ Cubic 5971.00 644.00
24 granite/ quartzite/ gneiss metal in well steining Meter
BR including compacting by vibrating, finishing and
curing complete. (Excluding reinforcement and
including shuttering.) (Cement 8.50 bags/Cu.Mt.)
With Fully Automatic Micro Processor based PLC
with SCADA enabled concrete Batch Mix Plant
(PAN Mixer). With crushed sand.
Spec. No.: BR.9 Page No. 109
18-1 / 24 Sinking of wells for foundation through all strata, Running 49665.00 24424.00
BR 14 except rock which can be removed by grabbing and Meter
chiseling soft disintegrated rock which required
special efforts, including blasting, large scale
dewatering heavy chiseling, cutting by pneumatic
tools and all materials available to sink through such
strata including removal of obstacle and use of
necessary plant and machinery, divers etc. and
proper seating of the wells. Depth upto 5 m.etc.
complete i) Well Dia. upto 5 metres
Spec. No.: BR.14 Page No. 113
18-2 / 24 Sinking of wells for foundation through all strata Running 71228.00 47175.00
BR 14 except rock which can be removed by grabbing and Meter
chiseling soft disintegrating rock which required
special efforts, including blasting, large scale
dewatering heavy chiseling, cutting by pneumatic
tools and all materials available to sink through such
strata including removal of obstacle and use of
necessary plant and machinery, divers etc. and
proper seating of the well. Depth up to 5 m. etc.
complete ii) Well Dia. above 5 metres & upto 6
metres
18-3 / 24 Sinking of wells for foundation through all strata Running 97077.00 47366.00
BR 14 except rock which can be removed by grabbing and Meter
chiseling soft disintegrating rock which required
special efforts, including blasting, large scale
dewatering heavy chiseling, cutting by pneumatic
tools and all materials available to sink through such
strata including removal of obstacle and use of
necessary plant and machinery, divers etc. and
proper seating of the well. Depth up to 5 m. etc.
complete iii) Well Dia. above 6 meters & upto
7meters
Spec. No.: BR.14 Page No. 113
18-4 / 24 Sinking of wells for foundation through all strata Running 126472.00 61709.00
BR 14 except rock which can be removed by grabbing and Meter
chiseling soft disintegrating rock which required
special efforts, including blasting, large scale
dewatering heavy chiseling, cutting by pneumatic
tools and all materials available to sink through such
strata including removal of obstacle and use of
necessary plant and machinery, divers etc. and
proper seating of the well. Depth up to 5 m. etc.
complete iv) Dia. above 7 meters & up to 8 meters
Spec. No.: BR.14 Page No. 113
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
19 / 24 Extra charges for sinking of various dia. well Cubic 1185.00 1185.00
BR 14 foundation in hard rock encountered during sinking Meter
by chiselling in water.
Spec. No.: BR. 14A Page No. 113
20 / 24 Providing steel anchor dowels at the base of the Number 6043.00 1874.00
BR 16 well including drilling holes of 60 mm dia. with
cement mortar 1:1 up to 2.5 m depth in rock, placing
the dowels in position and effectively grouting the
holes. (32mm dia. steel Rod of 4.0 m length grouted
up to 2.5 m depth.).
Spec. No.: BR.16 Page No. 120
22A a i / Providing and laying in situ M-15 c.c. of trap /granite Cubic 4743.00 909.00
24 /quartzite /gneiss metal for the bottom plugs of wells Meter
BR 17A in the dry condition including compaction and curing
wherever necessary. (Cement 5.90 bags/Cu.Mt.)
with fully automatic micro processor based PLC with
SCADA enabled with reversible Drum Type mixer.
With natural sand.
Spec. No.: BR.17 Page No. 120 and B 7, Page
No.38
22A a ii / Providing and laying in situ M-15 c.c. of trap /granite Cubic 4660.00 909.00
24 /quartzite /gneiss metal for the bottom plugs of wells Meter
BR 17A in the dry condition including compaction and curing
wherever necessary. (Cement 5.90 bags/Cu.Mt.)
with fully automatic micro processor based PLC with
SCADA enabled with reversible Drum Type mixer.
With Crushed sand.
Spec. No.: BR.17 Page No. 120 and B. 7, Page
No.38
22A b i / Providing and laying in situ M-15 c.c. of trap /granite Cubic 5009.00 909.00
24 /quartzite /gneiss metal for the bottom plugs of wells Meter
BR 17B under water including compaction and curing
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
22A b ii / Providing and laying in situ M-15 c.c. of trap /granite Cubic 4926.00 909.00
24 /quartzite /gneiss metal for the bottom plugs of wells Meter
BR 17B under water including compaction and curing
wherever necessary.(Under Water) (Cement 5.90
bags/Cu.Mt.) with fully automatic micro processor
based PLC with SCADA enabled with reversible
Drum Type mixer. With Crushed sand.
Spec. No.: BR.17 Page No. 120 and B. 7, Page
No.38
22B a i / Providing and laying in situ M-15 c.c. of trap /granite Cubic 5291.00 909.00
24 /quartzite /gneiss metal for the bottom plugs of wells Meter
BR in the dry condition including compaction and curing
wherever necessary. (Cement 5.90 bags/Cu.Mt.)
With Fully Automatic Micro Processor based PLC
with SCADA enabled concrete Batch Mix Plant
(PAN / DRUM Mixer). With natural sand.
Spec. No.: BR.17 Page No. 120 and B. 7, Page
No.38
22B a ii / Providing and laying in situ M-15 c.c. of trap /granite Cubic 5177.00 909.00
24 /quartzite /gneiss metal for the bottom plugs of wells Meter
BR in the dry condition including compaction and curing
wherever necessary. (Cement 5.90 bags/Cu.Mt.)
With Fully Automatic Micro Processor based PLC
with SCADA enabled concrete Batch Mix Plant
(PAN / DRUM Mixer). With Crushed sand
Spec. No.: BR.17 Page No. 120 and B. 7, Page
No.38
22B b i / Providing and laying M-15 R.C.C. of trap/ granite/ Cubic 5557.00 1168.00
24 quartzite/ gneiss metal for cast in situ piers, Meter
BR abutments, returns, wings, etc. including compacting
by vibrating and curing complete. (Excluding
finishing with cement plaster) including formwork
and bailing out of water. (up to 4m height) (Cement
5.90 bags/Cu.Mt.) With Fully Automatic Micro
Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). With natural
sand.
Spec. No.: BR.17 Page No. 120 and B. 7, Page
No.38
22B b ii / Providing and laying in situ M-15 c.c. of trap /granite Cubic 5444.00 1168.00
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
23 / 24 Providing and filling in well with sand /rubble and Cubic 757.00 213.00
BR 18 sand/single and sand including compaction between Meter
the top and bottom plugs.
Spec. No.: BR.18 Page No. 122
24A a / 24 Providing and laying in situ M-10 R.C.C. of trap Cubic 3978.00 809.00
BR 19A /granite/ quartzite/ gneiss metal for top plug of wells Meter
including compaction by vibration and curing.
(Cement 4.05 bags/Cu.Mt.) with fully automatic
micro processor based PLC with SCADA enabled
with reversible Drum Type mixer. With natural sand.
Spec. No.: BR.19 Page No.123 and B. 7, Page
No.38
24A b / 24 Providing and laying in situ M-10 R.C.C. of trap Cubic 3896.00 809.00
BR 19A /granite/ quartzite/ gneiss metal for top plug of wells Meter
including compaction by vibration and curing.
(Cement 4.05 bags/Cu.Mt.) with fully automatic
micro processor based PLC with SCADA enabled
with reversible Drum Type mixer. With Crushed
sand.
Spec. No.: BR.19 Page No.123 and B. 7, Page
No.38
24B a / 24 Providing and laying in situ M-10 R.C.C. of trap Cubic 4614.00 837.00
BR /granite/ quartzite/ gneiss metal for top plug of wells Meter
including compaction by vibration and curing.
(Cement 4.05 bags/Cu.Mt.) With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). With natural
sand.
Spec. No.: BR.19 Page No.123 and B. 7, Page
No.38
25A a i / Providing and laying in situ M.15 R.C.C. of trap/ Cubic 4590.00 761.00
24 granite /quartzite /gneiss metal for R.C.C. well /pile Meter
BR 24 cap including necessary formwork compaction by
vibrating, finishing and curing complete. (Excluding
reinforcement and including shuttering). (Cement
5.90 bags/Cu.Mt.) with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer. With natural sand.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
25A a ii / Providing and laying in situ M-15 R.C.C. of trap/ Cubic 4507.00 761.00
24 granite /quartzite /gneiss metal for R.C.C. well /pile Meter
BR 24 cap including necessary formwork compaction by
vibrating, finishing and curing complete. (Excluding
reinforcement and including shuttering). (Cement
5.90 bags/Cu.Mt.) with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer. With crushed sand.
Spec. No.: BR.24 Page No. 124 and B. 7, Page
No.38
25A b i / Providing and laying in situ M-20 R.C.C. of trap/ Cubic 5714.00 761.00
24 granite /quartzite /gneiss metal for R.C.C. well /pile Meter
BR 24 cap including necessary formwork compaction by
vibrating, finishing and curing complete. (Excluding
reinforcement and including shuttering). (Cement
6.90 bags/Cu.Mt.) with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer. With natural sand.
Spec. No.: BR.24 Page No. 124 and B. 7, Page
No.38
25A b ii / Providing and laying in situ M-20 R.C.C. of trap/ Cubic 5094.00 761.00
24 granite/ quartzite/ gneiss metal for R.C.C. well /pile Meter
BR 24 cap including necessary formwork compaction by
vibrating, finishing and curing complete. (Excluding
reinforcement and including shuttering). (Cement
6.90 bags/Cu.Mt.) with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer. With crushed sand
Spec. No.: BR.24 Page No. 124 and B. 7, Page
No.38
25B a i / Providing and laying in situ M.15 R.C.C. of trap/ Cubic 5138.00 761.00
24 granite /quartzite /gneiss metal for R.C.C. well /pile Meter
BR cap including necessary formwork compaction by
vibrating, finishing and curing complete. (Excluding
reinforcement and including shuttering). (Cement
5.90 bags/Cu.Mt.) With Fully Automatic Micro
Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). With natural
sand.
Spec. No.: BR.24 Page No. 124 and B. 7, Page
No.38
25B a ii / Providing and laying in situ M-15 R.C.C. of trap/ Cubic 5025.00 761.00
24 granite /quartzite /gneiss metal for R.C.C. well /pile Meter
BR cap including necessary formwork compaction by
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
25B b i / Providing and laying in situ M-20 R.C.C. of trap/ Cubic 5486.00 761.00
24 granite /quartzite /gneiss metal for R.C.C. well /pile Meter
BR cap including necessary formwork compaction by
vibrating, finishing and curing complete. (Excluding
reinforcement and including shuttering). (Cement
6.90 bags/Cu.Mt.) With Fully Automatic Micro
Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). With natural
sand.
Spec. No.: BR.24 Page No. 124 and B. 7, Page
No.38
25B b ii / Providing and laying in situ M-20 R.C.C. of trap/ Cubic 5373.00 761.00
24 granite/ quartzite/ gneiss metal for R.C.C. well /pile Meter
BR cap including necessary formwork compaction by
vibrating, finishing and curing complete. (Excluding
reinforcement and including shuttering). (Cement
6.90 bags/Cu.Mt.) With Fully Automatic Micro
Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). With crushed
sand
Spec. No.: BR.24 Page No. 124 and B. 7, Page
No.38
26a / 24 Providing and laying M-10 R.C.C. of trap/ granite/ Cubic 4140.00 923.00
BR 27a quartzite/ gneiss metal for cast in situ piers, Meter
abutments, returns, wings, etc. including compacting
by vibrating and curing complete. (Excluding
finishing with cement plaster) including formwork
and bailing out of water. (up to 4m height). (Cement
4.05 bags/Cu.Mt.) with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer. With natural sand.
Spec. No.: BR.27 Page No. 127 and B. 7, Page
No.38
26b / 24 Providing and laying M-10 R.C.C. of trap/ granite Cubic 4057.00 923.00
BR 27a /quartzite /gneiss metal for cast in situ piers, Meter
abutments, returns, wings, etc. including compacting
by vibrating and curing complete. (Excluding
finishing with cement plaster) including formwork
and bailing out of water. (up to 4m height). (Cement
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
27a / 24 Providing and laying M-10 R.C.C. of trap/ granite/ Cubic 4188.00 974.00
BR 27A b quartzite/ gneiss metal for cast in situ piers, Meter
abutments, returns, wings, etc. including compacting
by vibrating and curing complete with plums 15
percent (excluding finishing with cement plaster and
dewatering) including formwork and bailing out of
water. (up to 4 Mt. height) (Cement 4.05
bags/Cu.Mt.) with fully automatic micro processor
based PLC with SCADA enabled with reversible
Drum Type mixer. With natural sand.
Spec. No.: BR.27(a) Page No. 127 and B. 7, Page
No.38
27b / 24 Providing and laying M-10 R.C.C. of trap/ granite/ Cubic 4106.00 974.00
BR 27A b quartzite/ gneiss metal for cast in situ piers, Meter
abutments, returns, wings, etc. including compacting
by vibrating and curing complete with plums 15
percent (excluding finishing with cement plaster and
dewatering) including formwork and bailing out
water. (upto 4 Mt. height) (Cement 4.05
bags/Cu.Mt.) with fully automatic micro processor
based PLC with SCADA enabled with reversible
Drum Type mixer. With crushed sand.
Spec. No.: BR.27(a) Page No. 127 and B. 7, Page
No.38
Note :1. For item No. 27 basic rate shall be
increased for height above 4.00 m,in following
manners
(A) Depth 5 to 10 m Add 30% extra for rate
(B) Depth upto 15 m Add 40% extra for rate
(C) Depth upto 20 m Add 60% extra for rate
(D) Depth 20m & Above 100% extra for rate
28A a i / Providing and laying M-15 R.C.C. of trap/ granite/ Cubic 5100.00 978.00
24 quartzite/ gneiss metal for cast in situ piers, Meter
BR 27B abutments, returns, wings, etc. including compacting
by vibrating and curing complete. (Excluding
finishing with cement plaster) including formwork
and bailing out of water. (up to 4m height) (Cement
5.90 bags/Cu.Mt.) with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer. With natural sand.
Spec. No.: BR.27 Page No. 127 and B. 7, Page
No.38
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
28A a ii / Providing and laying M-15 R.C.C. of trap/ granite/ Cubic 5021.00 978.00
24 quartzite/ gneiss metal for cast in situ piers, Meter
BR 27B abutments, returns, wings, etc. including compacting
by vibrating and curing complete. (Excluding
finishing with cement plaster) including formwork
and bailing out of water. (up to 4m height) (Cement
5.90 bags/Cu.Mt.) with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer. With crushed sand.
Spec. No.: BR.27 Page No. 127 and B. 7, Page
No.38
28A b i / Providing and laying M-20 R.C.C. of trap/ granite/ Cubic 5475.00 978.00
24 quartzite/ gneiss metal for cast in situ piers, Meter
BR 27B abutments, returns, wings, etc. including compacting
by vibrating and curing complete. (Excluding
finishing with cement plaster) including formwork
and bailing out of water. (up to 4m height) (Cement
6.90 bags/Cu.Mt.) with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer. With natural sand.
Spec. No.: BR.27 Page No. 127 and B. 7, Page
No.38
28A b ii / Providing and laying M-20 R.C.C. of trap/ granite/ Cubic 5397.00 978.00
24 quartzite/ gneiss metal for cast in situ piers, Meter
BR 27B abutments, returns, wings, etc. including compacting
by vibrating and curing complete. (Excluding
finishing with cement plaster) including formwork
and bailing out of water. (up to 4m height) (Cement
6.90 bags/Cu.Mt.) with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer. With crushed sand.
Spec. No.: BR.27 Page No. 127 and B. 7, Page
No.38
28B a i / Providing and laying M-15 R.C.C. of trap/ granite/ Cubic 5699.00 999.00
24 quartzite/ gneiss metal for cast in situ piers, Meter
BR abutments, returns, wings, etc. including compacting
by vibrating and curing complete. (Excluding
finishing with cement plaster) including formwork
and bailing out of water. (up to 4m height) (Cement
5.90 bags/Cu.Mt.) With Fully Automatic Micro
Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). With natural
sand..
Spec. No.: BR.27 Page No. 127 and B. 7, Page
No.38
28B a ii / Providing and laying M-15 R.C.C. of trap/ granite/ Cubic 5573.00 999.00
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
28B b i / Providing and laying M-20 R.C.C. of trap/ granite/ Cubic 6065.00 999.00
24 quartzite/ gneiss metal for cast in situ piers, Meter
BR abutments, returns, wings, etc. including compacting
by vibrating and curing complete. (Excluding
finishing with cement plaster) including formwork
and bailing out of water. (up to 4m height) (Cement
6.90 bags/Cu.Mt.) With Fully Automatic Micro
Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). With natural
sand
Spec. No.: BR.27 Page No. 127 and B. 7, Page
No.38
28B b ii / Providing and laying M-20 R.C.C. of trap/ granite/ Cubic 5939.00 999.00
24 quartzite/ gneiss metal for cast in situ piers, Meter
BR abutments, returns, wings, etc. including compacting
by vibrating and curing complete. (Excluding
finishing with cement plaster) including formwork
and bailing out of water. (up to 4m height) (Cement
6.90 bags/Cu.Mt.) With Fully Automatic Micro
Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). With crushed
sand.
Spec. No.: BR.27 Page No. 127 and B. 7, Page
No.38
Note :1. For item No. 28 basic rate shall be
increased for height above 4.00 m,in following
manners
(A) Depth 5 to 10 m Add 30% extra for rate
(B) Depth upto 15 m Add 40% extra for rate
(C) Depth upto 20 m Add 60% extra for rate
(D) Depth 20m & Above 100% extra for rate
29A a / 24 Providing and laying in situ M-20 controlled concrete Cubic 5292.00 745.00
BR 29A of trap/ granite/ quartzite/ gneiss metal for R.C.C. Meter
caps over piers and abutments with projection
including necessary scaffolding, formwork,
compacting by vibrating, finishing and curing
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
29A b / 24 Providing and laying in situ M-20 controlled concrete Cubic 5214.00 745.00
BR 29A of trap/ granite/ quartzite/ gneiss metal for R.C.C. Meter
caps over piers and abutments with projection
including necessary scaffolding, formwork,
compacting by vibrating, finishing and curing
complete. (Excluding reinforcement and including
centering.) (Cement 6.90 bags/Cu.Mt.) with fully
automatic micro processor based PLC with SCADA
enabled with reversible Drum Type mixer. With
crushed sand.
Spec. No.: BR.29, Page No. 129 and B. 7, Page
No.38
29B a / 24 Providing and laying in situ M-20 controlled concrete Cubic 5903.00 761.00
BR of trap/ granite/ quartzite/ gneiss metal for R.C.C. Meter
caps over piers and abutments with projection
including necessary scaffolding, formwork,
compacting by vibrating, finishing and curing
complete. (Excluding reinforcement and including
centering.) (Cement 6.90 bags/Cu.Mt.) With Fully
Automatic Micro Processor based PLC with SCADA
enabled concrete Batch Mix Plant (PAN Mixer). With
natural sand.
Spec. No.: BR.29, Page No. 129 and B. 7, Page
No.38
29B b / 24 Providing and laying in situ M-20 controlled concrete Cubic 5724.00 761.00
BR of trap/ granite/ quartzite/ gneiss metal for R.C.C. Meter
caps over piers and abutments with projection
including necessary scaffolding, formwork,
compacting by vibrating, finishing and curing
complete. (Excluding reinforcement and including
centering.) (Cement 6.90 bags/Cu.Mt.) With Fully
Automatic Micro Processor based PLC with SCADA
enabled concrete Batch Mix Plant (PAN Mixer). With
crushed sand.
Spec. No.: BR.29, Page No. 129 and B. 7, Page
No.38
30A a / 24 Providing and laying in situ M-25 controlled cement Cubic 5716.00 745.00
BR 30 concrete of trap /granite /quartzite /gneiss metal for Meter
the R.C.C. concrete block below the bearing
including scaffolding, compaction by vibrating,
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
30A b / 24 Providing and laying in situ M-25 controlled cement Cubic 5584.00 745.00
BR 30 concrete of trap /granite /quartzite /gneiss metal for Meter
the R.C.C. concrete block below the bearing
including scaffolding, compaction by vibrating,
finishing and curing complete. (Excluding
reinforcement and including formwork.) (Cement
8.50 bags/Cu.Mt.) with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer. With crushed sand.
Spec. No.: BR.30 Page No. 130 and B. 7, Page
No.38
30B a / 24 Providing and laying in situ M-25 controlled cement Cubic 5807.00 761.00
BR concrete of trap /granite /quartzite /gneiss metal for Meter
the R.C.C. concrete block below the bearing
including scaffolding, compaction by vibrating,
finishing and curing complete. (Excluding
reinforcement and including formwork.) (Cement
8.50 bags/Cu.Mt.) With Fully Automatic Micro
Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). With natural
sand.
Spec. No.: BR.30 Page No. 130 and B. 7, Page
No.38
30B b / 24 Providing and laying in situ M-25 controlled cement Cubic 5676.00 761.00
BR concrete of trap /granite /quartzite /gneiss metal for Meter
the R.C.C. concrete block below the bearing
including scaffolding, compaction by vibrating,
finishing and curing complete. (Excluding
reinforcement and including formwork.) (Cement
8.50 bags/Cu.Mt.) With Fully Automatic Micro
Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). With crushed
sand.
Spec. No.: BR.30 Page No. 130 and B. 7, Page
No.38
BR 35A position and laying TMT FE 500 steel bar for Tonne
reinforcement as per detailed drawings for all R.C.C.
works.
Spec. No.: BR.35 Page No. 134
33a / 24 Providing & joining by mild /TMT FE 500 steel Number 598.00 364.00
BR 35B a reinforcement bars by bottle nuts including
supplying and fitting them in position etc. complete.
25 mm dia.
Spec. No.: As directed by Engineer in charge
33b / 24 Providing & joining by mild /TMT FE 500 steel Number 727.00 364.00
BR 35B b reinforcement bars by bottle nuts including
supplying and fitting them in position etc. complete.
32 mm dia.
Spec. No.: As directed by Engineer in charge.
34a / 24 Providing welded joints for steel reinforcement bars Number 196.00 165.00
BR 36A for 25 mm dia.
Spec. No.: BR.36 Page No. 134
34b / 24 Providing welded joints of steel reinforcement bars Number 202.00 165.00
BR 36B above 32 mm dia.
Spec. No.: BR.36 Page No. 134
35A a i / Providing and laying in situ M-20 controlled cement Cubic 5904.00 1635.00
24 concrete of trap/ granite/ quartzite/ gneiss metal for Meter
BR 38A R.C.C. Work including ramming, vibrating finishing
and curing complete in solid/ deck slab, etc.
(including formwork, centering, finishing in cement
plaster and excluding reinforcement) (Height up to 4
m) (Cement 6.90 bags/Cu.Mt.) with fully automatic
micro processor based PLC with SCADA enabled
with reversible Drum Type mixer. With natural sand.
Spec. No.: BR.38(a) Page No. 135 and B. 7, Page
No.38
35A a ii / Providing and laying in situ M-20 controlled cement Cubic 5841.00 1635.00
24 concrete of trap/ granite/ quartzite/ gneiss metal for Meter
BR 38A R.C.C. Work including ramming, vibrating finishing
and curing complete in solid/ deck slab, etc.
(including formwork, centering, finishing in cement
plaster and excluding reinforcement) (Height up to 6
m) (Cement 6.90 bags/Cu.Mt.) with fully automatic
micro processor based PLC with SCADA enabled
with reversible Drum Type mixer. With Crushed
sand.
Spec. No.: BR.38(a) Page No. 135 and B. 7, Page
No.38
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
35A b i / Providing and laying in situ M-25 controlled cement Cubic 6712.00 1635.00
24 concrete of trap/ granite/ quartzite/ gneiss metal for Meter
BR 38A R.C.C. Work including ramming, vibrating finishing
and curing complete in solid/ deck slab, etc.
(including formwork, centering, finishing in cement
plaster and excluding reinforcement) (Height up to 4
m) (Cement 8.50 bags/Cu.Mt.) with fully automatic
micro processor based PLC with SCADA enabled
with reversible Drum Type mixer. With natural sand.
Spec. No.: BR.38(b & c) Page No. 135 and B. 7,
Page No.38
35A b ii / Providing and laying in situ M-25 controlled cement Cubic 6632.00 1635.00
24 concrete of trap/ gran-ite/ quartzite/ gneiss metal for Meter
BR 38A R.C.C. Work including ramming, vibrating finishing
and curing complete in solid/ deck slab, etc.
(including formwork, centering, finishing in cement
plaster and excluding reinforcement) (Height up to 4
m) (Cement 8.50 bags/Cu.Mt.) with fully automatic
micro processor based PLC with SCADA enabled
with reversible Drum Type mixer. With Crushed
sand.
Spec. No.: BR.38(b & c) Page No. 135 and B. 7,
Page No.38
35A c i / Providing and laying in situ M-30 controlled cement Cubic 6968.00 1635.00
24 concrete of trap/ granite/ quartzite/ gneiss metal for Meter
BR 38A R.C.C. Work including ramming, vibrating finishing
and curing complete in solid/deck slab, etc.
(including formwork, centering, finishing in cement
plaster and excluding reinforcement) (Height up to
3m) (Cement 9.20 bags/Cu.Mt.) with fully automatic
micro processor based PLC with SCADA enabled
with reversible Drum Type mixer. With natural sand.
Spec. No.: BR.38(a) Page No. 135 and B. 7, Page
No.38
35A c ii / Providing and laying in situ M-30 controlled cement Cubic 6888.00 1635.00
24 concrete of trap/ granite/ quartzite/ gneiss metal for Meter
BR 38A R.C.C. Work including ramming, vibrating finishing
and curing complete in solid/ deck slab, etc.
(including formwork, centering, finishing in cement
plaster and excluding reinforcement) (Height up to
3m) (Cement 9.20 bags/Cu.Mt.) with fully automatic
micro processor based PLC with SCADA enabled
with reversible Drum Type mixer. With Crushed
sand.
Spec. No.: BR.38(a) Page No. 135 and B. 7, Page
No.38
35B a i / Providing and laying in situ M-20 controlled cement Cubic 6018.00 1636.00
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
35B a ii / Providing and laying in situ M-20 controlled cement Cubic 5897.00 1635.00
24 concrete of trap/ granite/ quartzite/ gneiss metal for Meter
BR R.C.C. Work including ramming, vibrating finishing
and curing complete in solid/ deck slab, etc.
(including formwork, centering, finishing in cement
plaster and excluding reinforcement) (Height up to 6
m) (Cement 6.90 bags/Cu.Mt.) With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). With
Crushed sand.
Spec. No.: BR.38(a) Page No. 135 and B. 7, Page
No.38
35B b i / Providing and laying in situ M-25 controlled cement Cubic 7299.00 1635.00
24 concrete of trap/ granite/ quartzite/ gneiss metal for Meter
BR R.C.C. Work including ramming, vibrating finishing
and curing complete in solid/ deck slab, etc.
(including formwork, centering, finishing in cement
plaster and excluding reinforcement) (Height up to 4
m) (Cement 8.50 bags/Cu.Mt.) With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). With natural
sand
Spec. No.: BR.38(b & c) Page No. 135 and B. 7,
Page No.38
35B b ii / Providing and laying in situ M-25 controlled cement Cubic 7179.00 1635.00
24 concrete of trap/ granite/ quartzite/ gneiss metal for Meter
BR R.C.C. Work including ramming, vibrating finishing
and curing complete in solid/ deck slab, etc.
(including formwork, centering, finishing in cement
plaster and excluding reinforcement) (Height up to 4
m) (Cement 8.50 bags/Cu.Mt.) With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). With
Crushed sand.
Spec. No.: BR.38(b & c) Page No. 135 and B. 7,
Page No.38
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
35B c i / Providing and laying in situ M-30 controlled cement Cubic 7555.00 1635.00
24 concrete of trap/ granite/ quartzite/ gneiss metal for Meter
BR R.C.C. Work including ramming, vibrating finishing
and curing complete in solid/deck slab, etc.
(including formwork, centering, finishing in cement
plaster and excluding reinforcement) (Height up to
3m) (Cement 9.20 bags/Cu.Mt.) With Fully
Automatic Micro Processor based PLC with SCADA
enabled concrete Batch Mix Plant (PAN Mixer). With
natural sand.
Spec. No.: BR.38(a) Page No. 135 and B. 7, Page
No.38
35B c ii / Providing and laying in situ M-30 controlled cement Cubic 7435.00 1635.00
24 concrete of trap/ granite/ quartzite/ gneiss metal for Meter
BR R.C.C. Work including ramming, vibrating finishing
and curing complete in solid/ deck slab, etc.
(including formwork, centering, finishing in cement
plaster and excluding reinforcement) (Height up to
3m) (Cement 9.20 bags/Cu.Mt.) With Fully
Automatic Micro Processor based PLC with SCADA
enabled concrete Batch Mix Plant (PAN Mixer). With
Crushed sand.
Spec. No.: BR.38(a) Page No. 135 and B. 7, Page
No.38
Note :1. For item No. 35 basic rate shall be
increased for height above 4.00 m,in following
manners
(A) Depth 5 to 10 m Add 30% extra for rate
(B) Depth upto 15 m Add 40% extra for rate
(C) Depth upto 20 m Add 60% extra for rate
(D) Depth 20m & Above 100% extra for rate
36A a i / Providing and laying in situ M.20 controlled cement Cubic 6326.00 1635.00
24 concrete of trap/ granite/ quartzite/ gneiss metal for Meter
BR 38A R.C.C. Work including ramming, vibrating finishing
and Curing complete in main/cross girders,
diaphrams, etc. (including formwork, centering,
finishing in cement plaster and excluding
reinforcement) (Height up to 6m). (Cement 6.90
bags/Cu.Mt.) with fully automatic micro processor
based PLC with SCADA enabled with reversible
Drum Type mixer. With natural sand.
Spec. No.: BR.38(b & c) Page No. 135 and B. 7,
Page No.38
36A a ii / Providing and laying in situ M.20 controlled cement Cubic 6245.00 1635.00
24 concrete of trap/ granite/ quartzite/ gneiss metal for Meter
BR 38A R.C.C. Work including ramming, vibrating finishing
and Curing complete in main/cross girders,
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
36A b i / Providing and laying in situ M.25 controlled cement Cubic 6705.00 1635.00
24 concrete of trap/ granite/ quartzite/ gneiss metal for Meter
BR 38A R.C.C. Work including ramming, vibrating finishing
and Curing complete in main/cross girders,
diaphragms, etc. (including formwork, centering,
finishing in cement plaster and excluding
reinforcement) (Height up to 6m). (Cement 8.50
bags/Cu.Mt.) with fully automatic micro processor
based PLC with SCADA enabled with reversible
Drum Type mixer. With natural sand.
Spec. No.: BR.38(b & c) Page No. 135 and B. 7,
Page No.38
36A b ii / Providing and laying in situ M.25 controlled cement Cubic 6625.00 1635.00
24 concrete of trap/ granite/ quartzite/ gneiss metal for Meter
BR 38A R.C.C. Work including ramming, vibrating finishing
and Curing complete in main/cross girders,
diaphragms, etc. (including formwork, centering,
finishing in cement plaster and excluding
reinforcement) (Height up to 6m). (Cement 8.50
bags/Cu.Mt.) with fully automatic micro processor
based PLC with SCADA enabled with reversible
Drum Type mixer. With Crushed sand.
Spec. No.: BR.38(b & c) Page No. 135 and B. 7,
Page No.38
36A c i / Providing and laying in situ M-30 cement concrete of Cubic 6961.00 1635.00
24 trap/ granite/ quartzite/ gneiss metal for R.C.C. Work Meter
BR 38A including ramming, vibrating finishing and curing
complete in main/cross girders, diaphragms, etc.
(including formwork, centering, finishing in cement
plaster and excluding reinforcement) (Height up to
3m). (Cement 9.20 bags/Cu.Mt.) with fully automatic
micro processor based PLC with SCADA enabled
with reversible Drum Type mixer. With natural sand.
Spec. No.: BR.38(b & c) Page No. 135 and B. 7,
Page No.38
36A c ii / Providing and laying in situ M-30 cement concrete of Cubic 6881.00 1635.00
24 trap/ granite/ quartzite/ gneiss metal for R.C.C. Work Meter
BR 38A including ramming, vibrating finishing and curing
complete in main/cross girders, diaphragms, etc.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
36B a i / Providing and laying in situ M.20 controlled cement Cubic 6707.00 1635.00
24 con-crete of trap/ granite/ quartzite/ gneiss metal for Meter
BR R.C.C. Work including ramming, vibrating finishing
and Curing complete in main/cross girders,
diaphragms, etc. (including formwork, centering,
finishing in cement plaster and excluding
reinforcement) (Height up to 6m). (Cement 6.90
bags/Cu.Mt.) With Fully Automatic Micro Processor
based PLC with SCADA enabled concrete Batch
Mix Plant (PAN Mixer). With natural sand
Spec. No.: BR.38(b & c) Page No. 135 and B. 7,
Page No.38
36B a ii / Providing and laying in situ M.20 controlled cement Cubic 6588.00 1635.00
24 concrete of trap/ granite/ quartzite/ gneiss metal for Meter
BR R.C.C. Work including ramming, vibrating finishing
and Curing complete in main/cross girders,
diaphragms, etc. (including formwork, centering,
finishing in cement plaster and excluding
reinforcement) (Height up to 6m). (Cement 6.90
bags/Cu.Mt.) With Fully Automatic Micro Processor
based PLC with SCADA enabled concrete Batch
Mix Plant (PAN Mixer). With Crushed sand.
Spec. No.: BR.38(b & c) Page No. 135 and B. 7,
Page No.38
36B b i / Providing and laying in situ M.25 controlled cement Cubic 7292.00 1635.00
24 concrete of trap/ granite/ quartzite/ gneiss metal for Meter
BR R.C.C. Work including ramming, vibrating finishing
and Curing complete in main/cross girders,
diaphragms, etc. (including formwork, centering,
finishing in cement plaster and excluding
reinforcement) (Height up to 6m). (Cement 8.50
bags/Cu.Mt.) With Fully Automatic Micro Processor
based PLC with SCADA enabled concrete Batch
Mix Plant (PAN Mixer). With natural sand
Spec. No.: BR.38(b & c) Page No. 135 and B. 7,
Page No.38
36B b ii / Providing and laying in situ M.25 controlled cement Cubic 7173.00 1635.00
24 concrete of trap/ granite/ quartzite/ gneiss metal for Meter
BR R.C.C. Work including ramming, vibrating finishing
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
36B c i / Providing and laying in situ M-30 cement concrete of Cubic 7548.00 1635.00
24 trap/ granite/ quartzite/ gneiss metal for R.C.C. Work Meter
BR including ramming, vibrating finishing and curing
complete in main/cross girders, diaphragms, etc.
(including formwork, centering, finishing in cement
plaster and excluding reinforcement) (Height up to
3m). (Cement 9.20 bags/Cu.Mt.) With Fully
Automatic Micro Processor based PLC with SCADA
enabled concrete Batch Mix Plant (PAN Mixer). With
natural sand.
Spec. No.: BR.38(b & c) Page No. 135 and B. 7,
Page No.38
36B c ii / Providing and laying in situ M-30 cement concrete of Cubic 7429.00 1635.00
24 trap/ granite/ quartzite/ gneiss metal for R.C.C. Work Meter
BR including ramming, vibrating finishing and curing
complete in main/cross girders, diaphragms, etc.
(including formwork, centering, finishing in cement
plaster and excluding reinforcement) (Height up to
3m). (Cement 9.20 bags/Cu.Mt.) With Fully
Automatic Micro Processor based PLC with SCADA
enabled concrete Batch Mix Plant (PAN Mixer). With
Crushed sand.
Spec. No.: BR.38(b & c) Page No. 135 and B. 7,
Page No.38
Note :1. For item No. 36 basic rate shall be
increased for height above 4.00 m,in
following manners
(A) Depth 5 to 10 m Add 30% extra for rate
(B) Depth upto 15 m Add 40% extra for rate
(C) Depth upto 20 m Add 60% extra for rate
(D) Depth 20m & Above 100% extra for rate
37 / 24 Providing and laying buried type expansion joint Running 672.00 107.00
MORT&H expansion gap being 20 mm covered with 12 mm Meter
C1-2604 thick 200 mm wide galvinised weldable structural
steel plate as per IS 2062 placed symmetrically to
the centre line of the joint, resting freely over the top
surface of the deck concrete, welding of 8 mm
diameter 100 mm long galvanised nails spaced 300
mm c/c along the centre line of the plate, all as
specified in MORT & H clause 2604
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
40a / 24 Providing and laying in situ 1:4:8 cement concrete of Cubic 3396.00 529.00
BR 45 trap /granite /quartzite /gneiss metal for haunch Meter
filling including compacting, curing complete. with
fully automatic micro processor based PLC with
SCADA enabled with reversible Drum Type mixer.
With natural sand.
Spec. No.: B R.45 Page No. 139
40b / 24 Providing and laying in situ 1:4:8 cement concrete of Cubic 3315.00 529.00
BR 45 trap /granite /quartzite /gneiss metal for haunch Meter
filling including compacting, curing complete. With
fully automatic micro processor based PLC with
SCADA enabled with reversible Drum Type mixer.
With crushed sand.
Spec. No.: B R.45 Page No. 139
42A a / 24 Providing and laying in situ M-20 c.c. of trap /granite/ Cubic 5137.00 772.00
BR 47 quartzite/ gneiss metal including compacting. Meter
finishing, curing and filling in joints with bitumen
complete for wearing course 8cm thick. (Cement
6.90 bags/Cu.Mt.) with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer. With natural sand.
Spec. No.: BR.47(a) Page No. 140 and B. 7, Page
No.38
42A b / 24 Providing and laying in situ M-20 c.c. of trap /granite/ Cubic 5055.00 772.00
BR 47 quartzite/ gneiss metal including compacting. Meter
finishing, curing and filling in joints with bitumen
complete for wearing course 8cm thick. (Cement
6.90 bags/Cu.Mt.) with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer. With crushed sand.
Spec. No.: BR.47(a) Page No. 140 and B. 7, Page
No.38
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
42B a / 24 Providing and laying in situ M-20 c.c. of trap /granite/ Cubic 5700.00 787.00
BR quartzite/ gneiss metal including compacting. Meter
finishing, curing and filling in joints with bitumen
complete for wearing course 8cm thick. (Cement
6.90 bags/Cu.Mt.) With Fully Automatic Micro
Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). With natural
sand.
Spec. No.: BR.47(a) Page No. 140 and B. 7, Page
No.38
42B b / 24 Providing and laying in situ M-20 c.c. of trap /granite/ Cubic 5584.00 787.00
BR quartzite/ gneiss metal including compacting. Meter
finishing, curing and filling in joints with bitumen
complete for wearing course 8cm thick. (Cement
6.90 bags/Cu.Mt.) With Fully Automatic Micro
Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). With crushed
sand.
Spec. No.: BR.47(a) Page No. 140 and B. 7, Page
No.38
43 / 24 Providing vent holes 100mm dia. G.I. pipe in the Number 463.00 31.00
BR 48 slab and wearing course with iron grill at the top and
galvanised iron pipe at bottom as per drawing.
Spec. No.: BR.48 Page No. 142
44A a / 24 Providing and laying in situ M-20 R.C.C. of trap Cubic 5924.00 1609.00
BR 50 /granite /quartzite /gneiss metal for RCC work,of Meter
ballast walls, kerbs, box returns etc. including
scaffolding, compaction, formwork finishing and
curing complete. (excluding reinforcement) (Cement
6.90 bags/Cu.Mt.) with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.With natural sand.
Spec. No.: BR.50 Page No. 143 and B. 7, Page
No.38
44A b / 24 Providing and laying in situ M-20 R.C.C. of trap Cubic 5842.00 1609.00
BR 50 /granite /quartzite /gneiss metal for RCC work,of Meter
ballast walls, kerbs, box returns etc. including
scaffolding, compaction, formwork finishing and
curing complete. (excluding reinforcement) (Cement
6.90 bags/Cu.Mt.) with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.With crushed sand.
Spec. No.: BR.50 Page No. 143 and B. 7, Page
No.38
44B a / 24 Providing and laying in situ M-20 R.C.C. of trap Cubic 6488.00 1610.00
BR /granite /quartzite /gneiss metal for RCC Meter
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
44B b / 24 Providing and laying in situ M-20 R.C.C. of trap Cubic 6372.00 1610.00
BR /granite /quartzite /gneiss metal for RCC work,of Meter
ballast walls, kerbs, box returns etc. including
scaffolding, compaction, formwork finishing and
curing complete. (excluding reinforcement) (Cement
6.90 bags/Cu.Mt.) With Fully Automatic Micro
Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).With crushed
sand.
Spec. No.: BR.50 Page No. 143 and B. 7, Page
No.38
45A / 24 Providing R.C.C. parapet with M-20 C.C. of trap/ Running 1169.00 459.00
BR 51 granite/ quartzite/ gneiss metal with cast in Meter
situ/precast panels as per the detailed drawing
including reinforcement, scaffolding, centering,
formwork, compacting, finishing and curing
complete. with fully automatic micro processor
based PLC with SCADA enabled with reversible
Drum Type mixer. (Cement 6.90 bags/Cu.Mt.)
Spec. No.: BR.51 (a) Page No. 144 and B. 7, Page
No.38
45B / 24 Providing R.C.C. parapet with M-20 C.C. of trap/ Cubic 1183.00 460.00
BR granite/ quartzite/ gneiss metal with cast in Meter
situ/precast panels as per the detailed drawing
including reinforcement, scaffolding, centering,
formwork, compacting, finishing and curing
complete. With Fully Automatic Micro Processor
based PLC with SCADA enabled concrete Batch
Mix Plant (PAN Mixer). (Cement 6.90 bags/Cu.Mt.)
Spec. No.: BR.51 (a) Page No. 144 and B. 7, Page
No.38
46 / 24 Providing railing of mild steel angle post 2M center Running 3222.00 876.00
BR 51B to center of section 75mm x 75mm x 10mm or Meter
equivalent I/ channel section of height 1.05 above
bridge surface with minimum anchor length of 30cm
including hold fast of 25mm dia. M.S. bar welded at
the bottom and concreting of 1:3:6 of size 30cm x
30cm x 30cm with three rows of 40mm B class G.I.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
47 / 24 Providing R.C.C. railing of cast in situ R.C.C. posts Running 2169.00 150.00
BR 51C with M-20 c.c. of trap/ granite/ quartzite/ gneiss Meter
metal for horizontal and vertical members as per
detailed drawings including reinforcement,
scaffolding, centering, formwork, compaction,
finishing and curing with watering chemical
compound etc. complete. with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR.51(c) Page No. 145 and B. 7, Page
No.38
49A a / 24 Providing and casting special grade in M-35 Cubic 8032.00 1160.00
BR 59 a controlled cement concrete for prestressed concrete Meter
work for main girder including slab, cross girder etc.
including centering and scaffolding or launching
including necessary plant &machinery for the job
shuttering, vibrating, curing, finishing etc. complete.
Precast/or cast in situ (Cement 10.20 bags/Cu.Mt.)
with fully automatic micro processor based PLC with
SCADA enabled with reversible Drum Type mixer.
With natural sand.
Spec. No.: BR-38 Page No.135 and B. 7, Page
No.38
49A b / 24 Providing and casting special grade in M-35 Cubic 7967.00 1160.00
BR 59 a controlled cement concrete for prestressed concrete Meter
work for main girder including slab, cross girder etc.
including centering and scaffolding or launching
including necessary plant &machinery for the job
shuttering, vibrating, curing, finishing etc. complete.
Precast/or cast in situ (Cement 10.20 bags/Cu.Mt.)
with fully automatic micro processor based PLC with
SCADA enabled with reversible Drum Type mixer.
With crushed sand.
Spec. No.: BR-38 Page No.135 and B. 7, Page
No.38
49B a / 24 Providing and casting special grade in M-35 Cubic 8979.00 508.00
BR controlled cement concrete for prestressed concrete Meter
work for main girder including slab, cross girder etc.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
49B b / 24 Providing and casting special grade in M-35 Cubic 8826.00 508.00
BR controlled cement concrete for prestressed concrete Meter
work for main girder including slab, cross girder etc.
including centering and scaffolding or launching
including necessary plant & machinery for the job
shuttering, vibrating, curing, finishing etc. complete.
Precast/or cast in situ (Cement 10.20 bags/Cu.Mt.)
With Fully Automatic Micro Processor based PLC
with SCADA enabled concrete Batch Mix Plant
(PAN Mixer). With crushed sand.
Spec. No.: BR-38 Page No.135 and B. 7, Page
No.38
50A a i / Providing and laying in situ controlled grade of M-15 Cubic 4765.00 794.00
24 of trap stone metal for R.C.C. works in cut off Meter
BR 59 a walls/curtain walls including necessary scaffolding,
centering compacting by vibrator and finishing
curing complete. (Cement 5.90 bags/Cu.Mt.) with
fully automatic micro processor based PLC with
SCADA enabled with reversible Drum Type mixer.
With natural sand.
Spec. No.: As directed by Engineer in charge.
50A a ii / Providing and laying in situ controlled grade of M-15 Cubic 4687.00 794.00
24 of trap stone metal for R.C.C. works in cut off Meter
BR 59 a walls/curtain walls including necessary scaffolding,
centering compacting by vibrator and finishing
curing complete. (Cement 5.90 bags/Cu.Mt.) with
fully automatic micro processor based PLC with
SCADA enabled with reversible Drum Type mixer.
With crushed sand.
Spec. No.: As directed by Engineer in charge.
50A b i / Providing and laying in situ controlled grade of M-20 Cubic 5158.00 794.00
24 of trap stone metal for R.C.C. works in cut off Meter
BR 59 a walls/curtain walls including necessary scaffolding,
centering compacting by vibrator and finishing
curing complete. (Cement 6.90 bags/Cu.Mt.) with
fully automatic micro processor based PLC with
SCADA enabled with reversible Drum Type mixer.
With natural sand.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
50A b ii / Providing and laying in situ controlled grade of M-20 Cubic 5079.00 794.00
24 of trap stone metal for R.C.C. works in cut off Meter
BR 59 a walls/curtain walls including necessary scaffolding,
centering compacting by vibrator and finishing
curing complete with fully automatic micro processor
based PLC with SCADA enabled with reversible
Drum Type mixer.. (Cement 6.90 bags/Cu.Mt.) With
crushed sand.
Spec. No.: As directed by Engineer in charge.
50A c i / Providing and laying in situ controlled grade of M-25 Cubic 5744.00 794.00
24 of trap stone metal for R.C.C. works in cut off Meter
BR 59 a walls/curtain walls including necessary scaffolding,
centering compacting by vibrator and finishing
curing complete. with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer. (Cement 8.50
bags/Cu.Mt.) With natural sand.
Spec. No.: As directed by Engineer in charge.
50A c ii / Providing and laying in situ controlled grade of M-25 Cubic 5665.00 794.00
24 of trap stone metal for R.C.C. works in cut off Meter
BR 59 a walls/curtain walls including necessary scaffolding,
centering compacting by vibrator and finishing
curing complete. with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer. (Cement 8.50
bags/Cu.Mt.) With crushed sand.
Spec. No.: As directed by Engineer in charge.
50B a i / Providing and laying in situ controlled grade of M-15 Cubic 5381.00 708.00
24 of trap stone metal for R.C.C. works in cut off Meter
BR walls/curtain walls including necessary scaffolding,
centering compacting by vibrator and finishing
curing complete. (Cement 5.90 bags/Cu.Mt.) With
Fully Automatic Micro Processor based PLC with
SCADA enabled concrete Batch Mix Plant (PAN
Mixer). With natural sand.
Spec. No.: As directed by Engineer in charge.
50B a ii / Providing and laying in situ controlled grade of M-15 Cubic 5255.00 708.00
24 of trap stone metal for R.C.C. works in cut off Meter
BR walls/curtain walls including necessary scaffolding,
centering compacting by vibrator and finishing
curing complete. (Cement 5.90 bags/Cu.Mt.) With
Fully Automatic Micro Processor based PLC with
SCADA enabled concrete Batch Mix Plant (PAN
Mixer). With crushed sand.
Spec. No.: As directed by Engineer in charge.
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
50B b i / Providing and laying in situ controlled grade of M-20 Cubic 5747.00 708.00
24 of trap stone metal for R.C.C. works in cut off Meter
BR walls/curtain walls including necessary scaffolding,
centering compacting by vibrator and finishing
curing complete. (Cement 6.90 bags/Cu.Mt.) With
Fully Automatic Micro Processor based PLC with
SCADA enabled concrete Batch Mix Plant (PAN
Mixer). With natural sand.
Spec. No.: As directed by Engineer in charge.
50B b ii / Providing and laying in situ controlled grade of M-20 Cubic 5621.00 708.00
24 of trap stone metal for R.C.C. works in cut off Meter
BR walls/curtain walls including necessary scaffolding,
centering compacting by vibrator and finishing
curing complete With Fully Automatic Micro
Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).. (Cement
6.90 bags/Cu.Mt.) With crushed sand.
Spec. No.: As directed by Engineer in charge.
50B c i / Providing and laying in situ controlled grade of M-25 Cubic 6332.00 708.00
24 of trap stone metal for R.C.C. works in cut off Meter
BR walls/curtain walls including necessary scaffolding,
centering compacting by vibrator and finishing
curing complete. With Fully Automatic Micro
Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). (Cement
8.50 bags/Cu.Mt.) With natural sand.
Spec. No.: As directed by Engineer in charge.
50B c ii / Providing and laying in situ controlled grade of M-25 Cubic 6206.00 708.00
24 of trap stone metal for R.C.C. works in cut off Meter
BR walls/curtain walls including necessary scaffolding,
centering compacting by vibrator and finishing
curing complete. With Fully Automatic Micro
Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). (Cement
8.50 bags/Cu.Mt.) With crushed sand.
Spec. No.: As directed by Engineer in charge.
51 / 24 Providing 0.9 meter thick metal mat of rubble Square 1016.00 109.00
BR 62 oversize metal for specified thickness a per detailed Meter
drawing including supplying all materials hand
packing rubble spreading metal and hard murum
including watering and compaction with power roller
etc. complete.
Spec. No.: As directed by Engineer in charge
52 / 24 Providing islands for laying steel curb or cutting Number 157189.00 23669.00
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
53 / 24 Providing islands for laying steel curb or cutting Number 124376.00 24863.00
BR edge of wells upto 3mtr. depth of standing water for
single lane bridge. -- with earth
Spec. No.: BR.7. P.No. 107
54 / 24 Providing tar paper bearing pad including fixing etc. Square 131.00 78.00
BR complete. Meter
Spec. No.: As directed by Engineer in charge
55 / 24 Providing and fixing in position to exact profile and Metric 177072.00 5250.00
BR prestressing high tensile strands of specified Tonne
ultimate strength, standard end anchorages, cable
ducts, grouting ducts after pres-tressing and bearing
plates with wedges as per detailed drawings
including necessary plant and machinery for
prestressing etc. complete. a) For Strand
Spec. No.: As directed by Engineer in charge.
58 / 24 Providing and applying well mixed polymer cement Square 493.00 30.00
BR slurry (polymer cement ratio 1:2) over well soaked Meter
but surface dry concrete and steel rebar for
adhesion of fresh cement and sand mortar as per
specification and as directed etc. complete. (Note :
Item includes use of polymers like sikalatex or
similar materials of relevant specification and
scaffolding for height 8 to 10 meters.)
Spec. No.: As directed by Engineer in charge.
60A a / 24 Providing and laying M-35 grade c.c. for R.C.C. Cubic 5724.00 1325.00
BR jacketing around the piers etc. complete. (Note : Meter
This item includes jacketing to piers of existing
bridge. This item includes scaffolding for height of 8
to 10 meters.) with fully automatic micro processor
based PLC with SCADA enabled with reversible
Drum Type mixer. With natural sand.
Spec. No.: As directed by Engineer in charge.
60A b / 24 Providing and laying M-35 grade c.c. for Cubic 5592.00 1325.00
BR R.C.C.jacketing around the piers etc. complete. Meter
(Note : This item includes jacketing to piers of
existing bridge. This item includes scaffolding for
height of 8 to 10 meters.) with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer. With crushed sand.
Spec. No.: As directed by Engineer in charge.
60B a / 24 Providing and laying M-35 grade c.c. for R.C.C. Cubic 5860.00 1325.00
BR jacketing around the piers etc. complete. (Note : Meter
This item includes jacketing to piers of existing
bridge. This item includes scaffolding for height of 8
to 10 meters.) With Fully Automatic Micro Processor
based PLC with SCADA enabled concrete Batch
Mix Plant (PAN Mixer). With natural sand.
Spec. No.: As directed by Engineer in charge.
60B b / 24 Providing and laying M-35 grade c.c. for Cubic 5675.00 1325.00
BR R.C.C.jacketing around the piers etc. complete. Meter
(Note : This item includes jacketing to piers of
existing bridge. This item includes scaffolding for
height of 8 to 10 meters.) With Fully Automatic Micro
Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer). With crushed
sand.
Spec. No.: As directed by Engineer in charge.
62A a / 24 Providing M-30 R.C.C. cast in situ 450 mm dia. Running 2043.00 490.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62A b / 24 Providing M-30 R.C.C. cast in situ 475 mm dia. Running 2117.00 511.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62A c / 24 Providing M-30 R.C.C. cast in situ 500 mm dia. Running 2275.00 559.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62A d / 24 Providing M-30 R.C.C. cast in situ 525 mm dia. Running 2428.00 588.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
62A e / 24 Providing M-30 R.C.C. cast in situ 550 mm dia. Running 2528.00 588.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62A f / 24 Providing M-30 R.C.C. cast in situ 600 mm dia. Running 3116.00 903.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62A g / 24 Providing M-30 R.C.C. cast in situ 625 mm dia. Running 3683.00 928.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62A h / 24 Providing M-30 R.C.C. cast in situ 650 mm dia. Running 3847.00 963.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
62A i / 24 Providing M-30 R.C.C. cast in situ 750 mm dia. Running 4974.00 1256.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62A j / 24 Providing M-30 R.C.C. cast in situ 800 mm dia. Running 5342.00 1344.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62A k / 24 Providing M-30 R.C.C. cast in situ 825 mm Running 5715.00 1437.00
BR dia.bored piles each of load capacity as per design Meter
and of specified diameter of as directed, placed
through steel shell sunk to the required depth
through all strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62A l / 24 Providing M-30 R.C.C. cast in situ 900 mm dia. Running 6262.00 1574.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
62A m / Providing M-30 R.C.C. cast in situ 975 mm dia. Running 6757.00 1723.00
24 bored piles each of load capacity as per design and Meter
BR of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62A n / 24 Providing M-30 R.C.C. cast in situ 1000 mm Running 8630.00 2228.00
BR dia.bored piles each of load capacity as per design Meter
and of specified diameter of as directed, placed
through steel shell sunk to the required depth
through all strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62A o / 24 Providing M-30 R.C.C. cast in situ 1050 mm dia. Running 9106.00 2340.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62A p / 24 Providing M-30 R.C.C. cast in situ 1100 mm dia. Running 9770.00 2453.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
62A q / 24 Providing M-30 R.C.C. cast in situ 1200 mm dia. Running 11108.00 2790.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62A r / 24 Providing M-30 R.C.C. cast in situ 1500 mm dia. Running 18094.00 4539.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62B a / 24 Providing M-30 R.C.C. cast in situ 450 mm dia. Running 2175.00 308.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62B b / 24 Providing M-30 R.C.C. cast in situ 475 mm dia. Running 2305.00 337.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
62B c / 24 Providing M-30 R.C.C. cast in situ 500 mm dia. Running 2442.00 368.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62B d / 24 Providing M-30 R.C.C. cast in situ 525 mm dia. Running 2586.00 401.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62B e / 24 Providing M-30 R.C.C. cast in situ 550 mm dia. Running 2736.00 436.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62B f / 24 Providing M-30 R.C.C. cast in situ 600 mm dia. Running 3833.00 513.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
62B g / 24 Providing M-30 R.C.C. cast in situ 625 mm dia. Running 4005.00 553.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62B h / 24 Providing M-30 R.C.C. cast in situ 650 mm dia. Running 4185.00 594.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62B i / 24 Providing M-30 R.C.C. cast in situ 750 mm dia. Running 5913.00 798.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62B j / 24 Providing M-30 R.C.C. cast in situ 800 mm dia. Running 6359.00 899.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
62B k / 24 Providing M-30 R.C.C. cast in situ 825 mm dia. Running 6589.00 952.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62B l / 24 Providing M-30 R.C.C. cast in situ 900 mm dia. Running 7323.00 1119.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62B m / Providing M-30 R.C.C. cast in situ 975 mm dia. Running 8115.00 1298.00
24 bored piles each of load capacity as per design and Meter
BR of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62B n / 24 Providing M-30 R.C.C. cast in situ 1000 mm dia. Running 10083.00 1419.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
62B o / 24 Providing M-30 R.C.C. cast in situ 1050 mm dia. Running 10659.00 1549.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62B p / 24 Providing M-30 R.C.C. cast in situ 1100 mm dia. Running 11270.00 1688.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62B q / 24 Providing M-30 R.C.C. cast in situ 1200 mm dia. Running 13274.00 2016.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
62B r / 24 Providing M-30 R.C.C. cast in situ 1500 mm dia. Running 20758.00 3151.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
63A a / 24 Providing M-35 R.C.C. cast in situ 450 mm dia. Running 2083.00 526.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
63A b / 24 Providing M-35 R.C.C. cast in situ 475 mm dia. Running 2190.00 554.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
63A c / 24 Providing M-35 R.C.C. cast in situ 500 mm dia. Running 2303.00 576.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
63A d / 24 Providing M-35 R.C.C. cast in situ 525 mm dia. Running 2461.00 622.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
63A e / 24 Providing M-35 R.C.C. cast in situ 550 mm dia. Running 2681.00 679.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
63A f / 24 Providing M-35 R.C.C. cast in situ 600 mm Running 3613.00 912.00
BR dia.bored piles each of load capacity as per design Meter
and of specified diameter of as directed, placed
through steel shell sunk to the required depth
through all strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
63A g / 24 Providing M-35 R.C.C. cast in situ 625 mm dia. Running 3809.00 961.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
63A h / 24 Providing M-35 R.C.C. cast in situ 650 mm dia. Running 4097.00 1031.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
63A i / 24 Providing M-35 R.C.C. cast in situ 750 mm dia. Running 5191.00 1311.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
63A j / 24 Providing M-35 R.C.C. cast in situ 800 mm dia. Running 5530.00 1395.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
63A k / 24 Providing M-35 R.C.C. cast in situ 825 mm dia. Running 5736.00 1446.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
63A l / 24 Providing M-35 R.C.C. cast in situ 900 mm dia. Running 6927.00 1742.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
63A m / Providing M-35 R.C.C. cast in situ 975 mm dia. Running 7873.00 1984.00
24 bored piles each of load capacity as per design and Meter
BR of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
63A n / 24 Providing M-35 R.C.C. cast in situ 1000 mm dia. Running 8845.00 2169.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
63A o / 24 Providing M-35 R.C.C. cast in situ 1050 mm dia. Running 9283.00 2290.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
63A p / 24 Providing M-35 R.C.C. cast in situ 1100 mm dia. Running 9886.00 2489.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
63A q / 24 Providing M-35 R.C.C. cast in situ 1200 mm dia. Running 12549.00 3157.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
63A r / 24 Providing M-35 R.C.C. cast in situ 1500 mm dia. Running 18540.00 4669.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete with fully automatic micro
processor based PLC with SCADA enabled with
reversible Drum Type mixer.
Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600
and 1700
63B a / 24 Providing M-35 R.C.C. cast in situ 450 mm dia. Running 2231.00 308.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
63B b / 24 Providing M-35 R.C.C. cast in situ 475 mm dia. Running 2367.00 337.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
63B c / 24 Providing M-35 R.C.C. cast in situ 500 mm dia. Running 2510.00 368.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
63B d / 24 Providing M-35 R.C.C. cast in situ 525 mm dia. Running 2661.00 401.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
63B e / 24 Providing M-35 R.C.C. cast in situ 550 mm dia. Running 2819.00 436.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
63B f / 24 Providing M-35 R.C.C. cast in situ 600 mm dia. Running 3931.00 513.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
63B g / 24 Providing M-35 R.C.C. cast in situ 625 mm dia. Running 4113.00 553.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
63B h / 24 Providing M-35 R.C.C. cast in situ 650 mm dia. Running 4301.00 594.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
63B i / 24 Providing M-35 R.C.C. cast in situ 750 mm dia. Running 6066.00 798.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
63B j / 24 Providing M-35 R.C.C. cast in situ 800 mm dia. Running 6618.00 981.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
63B k / 24 Providing M-35 R.C.C. cast in situ 825 mm dia. Running 6775.00 952.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
63B l / 24 Providing M-35 R.C.C. cast in situ 900 mm dia. Running 7545.00 1119.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
63B m / Providing M-35 R.C.C. cast in situ 975 mm dia. Running 8375.00 1298.00
24 bored piles each of load capacity as per design and Meter
BR of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
63B n / 24 Providing M-35 R.C.C. cast in situ 1000 mm dia. Running 10357.00 1419.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
63B o / 24 Providing M-35 R.C.C. cast in situ 1050 mm dia. Running 10961.00 1549.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer)
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
63B p / 24 Providing M-35 R.C.C. cast in situ 1100 mm dia. Running 11601.00 1688.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
63B q / 24 Providing M-35 R.C.C. cast in situ 1200 mm dia. Running 13668.00 2016.00
BR bored piles each of load capacity as per design and Meter
of specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor based PLC with SCADA enabled
concrete Batch Mix Plant (PAN Mixer).
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
63B r / 24 Providing M-35 R.C.C. cast in situ 1500 mm Running 21373.00 3151.00
BR dia.bored piles each of load capacity as per design Meter
and of specified diameter of as directed, placed
through steel shell sunk to the required depth
through all strata except rock, excluding provision of
reinforcement including placing concrete by tremie
arrangement compaction of concrete and withdrawal
of steel shall etc. complete With Fully Automatic
Micro Processor
Spec. No.: BR-21 Page 124, MORT&H - 1100 and
1700
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
64 / 24 Providing, placing and driving in position 6mm thick Metric 62343.00 8102.00
BR permanent M.S. liner up to required depth with 12 Tonne
mm thick M.S. cutting edge of 0.5 meter length of
bottom including fabricating, cutting the M.S. sheet
to required diameter and shape, welding the joints
and driving with the help of required machineries
including all materials, labour and lift etc. complete.
Spec. No.: MORT&H 5th Revision
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
2 / 25 Providing and filling Annular Space Around Footing Cubic 3824.00 387.00
MORTH in Rock by using concrete of M-15 grade. Meter
304 Spec. No.: M.O.R.T & H - 2100
9a / 25 Back filling behind abutment, wing wall and return Cubic 502.00 248.00
MORTH wall complete as per drawing & Technical Meter
2200 Specifications.-- Granular material
Spec. No.: MORT & H 2200 &-710.1.4 of IRC-78
9b / 25 Back filling behind abutment, wing wall and return Cubic 857.00 248.00
MORTH wall complete as per drawing & Technical Meter
2200 Specifications. -- Sandy material
Spec. No.: MORT & H 2200 &-710.1.4 of IRC-78
10 / 25 Providing and laying of Filter media with granular Cubic 778.00 215.00
MORTH materials/ stone crushed aggregates satisfying the Meter
2200 - requirements laid down in clause 2504.2.2 of
MORTH specifications to a thickness of not less
than 600 mm with smaller size towards the soil and
bigger size towards the wall and provided over the
entire surface behind abutment, wing wall and
return wall to the full height compacted to a firm
condition complete as per drawing and technical
specifications.
Spec. No.: MORT & H 2200 &-710.1.4 of IRC-78
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
11 / 25 Supplying, fitting and fixing in position true to line Metric 291.00 54.00
MORTH and level cast steel rocker bearing conforming to Tonne
2000 IRC:83 (Pt-1) section IX and clause 2003 of
MORTH specifications complete including all
accessories as per drawing and technical
specifications.
Spec. No.: MORT & H -2000,1000,2200 &f IRC 83-
1982
12 / 25 Supplying, fitting and fixing in position true to line Metric 583.00 54.00
MORTH and level forged steel roller bearing conforming to Tonne
2000 IRC:83 (Pt-1) section IX and clause 2003 of
MORTH specifications complete including all
accessories as per drawing and technical
specifications.
Spec. No.: MORT & H – 2000 & 2200
13 / 25 Supplying, fitting and fixing in position true to line Metric 234.00 27.00
MORTH and level sliding plate bearing with PTFE surface Tonne
2000 sliding on stainless steel complete including all
accessories as per drawing and technical
specifications and BS:5400, section 9.1 & 9.2 (for
PTFE) and clause 2004 of MORTH specifications.
Spec. No.: MORT & H – 2000 & 2200
14 / 25 Supplying, fitting and fixing in position true to line Metric 1.40 0.10
MORTH and level elastomeric bearing conforming to Tonne
2000 IRC:83 (Pt.-II) section IX and clause 2005 of
MORTH specifications complete including all
accessories as per drawing and technical
specifications.
Spec. No.: MORT & H – 2000 & 2200
15 / 25 Supplying, fitting and fixing in position true to line Metric 232.00 11.00
MORTH and level sliding plate bearing with stainless steel Tonne
2000 plate sliding on stainless steel plate with mild steel
matrix complete including all accessories as per
drawing and technical specifications.
Spec. No.: MORT & H – 2000 & 2200
16 / 25 Supplying, fitting and fixing in position true to line Metric 218.00 11.00
MORTH and level POT- PTFE bearing consisting of a Tonne
2000 metal piston supported by a disc or unreinforced
elastomer confined within a metal cylinder, sealing
rings, dust seals, PTFE surface sliding against
stainless steel mating surface, complete assembly
to be of cast steel / fabricated structural steel,
metal and elastomer elements to be as per IRC: 83
part I & II respectively and other parts conforming
to BS:5400, section 9.1 & 9.2 and clause 2006 of
MORTH Specifications complete as per drawing
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
18 / 25 Providing and laying 12mm thick mastic asphalt. Square 372.00 54.00
MORTH wearing course on top of deck slab excluding Meter
500 prime coat with paving grade bitumen meeting the
requirements given in table 500-29, prepared by
using mastic cooker and laid to required level and
slope after cleaning the surface, including
providing antiskid surface with bitumen precoated
fine grained hard stone chipping of 9.5 mm
nominal size at the rate of 0.005 cum per 10 Sqm
and at an approximate spacing of 10 cm center to
center in both directions, pressed into surface
when the temperature of surfaces not less than
100 deg. C, protruding 1 mm- to 4mm over mastic
surface, all complete as per clause 515.
Spec. No.: MORT & H – 500, 2700
21 / 25 Providing and laying in PCC M-15 Grade leveling Cubic 4440.00 483.00
MORTH course below approach slab complete with fully Meter
1700 automatic micro processor PLC with SCADA
enabled reversible Drum Type mixer. as per
drawing and Technical specifications
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
26i / 25 Providing & filling 20 mm thick compressible fibre Running 443.00 5.00
MORTH board in expansion joint complete as per drawing & Meter
2600 Technical specification.
Spec. No.: MORT & H – 2600
26ii / 25 Providing and filling joint sealing compound as per Running 24.00 5.00
MORTH drawing and Technical specification with coarse Meter
2600 sand and 6% bitumen by weight.
Spec. No.: MORT & H – 2600
31 / 25 Providing and laying boulders apron on river bed Cubic 847.00 212.00
MORTH for protection against scour with stone boulders Meter
2500 weighing not less than 40 kg each complete as
per drawing and Technical specifications. --
Boulder laid without wire crates.
Spec. No.: MORT & H-2500
32 / 25 Boulder apron laid in wire crates - Providing and Cubic 1579.00 269.00
MORTH laying of boulder apron laid in wire crates made Meter
2500 with 4 mm dia G.I. wire conforming to IS:2801
Sr. No & Completed Labour
Item Code Item Description Unit Rate Rate
33 / 25 Cement concrete blocks (size 0.5 X0.5X0.5 m)- Cubic 4526.00 591.00
MORTH Providing and laying of apron with cement concrete Meter
2500 blocks of size 0.5 X0.5X0.5 m cast in-situ and
made with nominal mix of M-15 grade cement
concrete with a minimum cement content of 250kg/
cum with fully automatic micro processor PLC with
SCADA enabled reversible Drum Type mixer. as
per IRC:21-2000.)
Spec. No.: MORT & H-2500
34a / 25 Providing and laying Pitching on slopes laid over Cubic 743.00 266.00
MORTH prepared filter media including boulder apron laid Meter
2500 dry in front of toe of embankment complete as per
drawing and Technical specifications. --
Stone/Boulder
Spec. No.: MORT & H-2500
34b / 25 Providing and laying Pitching on slopes laid over Cubic 4208.00 537.00
MORTH prepared filter media including boulder apron laid Meter
2500 dry in front of toe of embankment complete with
fully automatic micro processor PLC with SCADA
enabled reversible Drum Type mixer. as per
drawing and Technical specifications. -- Cement
Concrete blocks of size 0.30x 0.30x0.30 m cast in
cement concrete of Grade M15
Spec. No.: MORT & H-2500
37b / 25 Providing and laying Flooring complete as per Cubic 5637.00 773.00
MORTH drawing and Technical specifications laid over Meter
2500 cement concrete bedding.-- Cement Concrete
blocks Grade M-15
Spec. No.: MORT & H –2500
1 2 3 4
I) ROAD SURVEY
1 2 3 4
2] Streams
Sr. Item of Work Unit Rate
1 2 3 4
I] ROADS
9] Detailed survey for a new hilly road along Day 0.50 Km.
utilizing existing forest track
(Without cross sec.) but inclusive of
10] Taking cross section for a road in hilly Day 0.40 Km.
country along the alignment including
chaining leveling and closing of survey of
the close of day.(Note : Length should
be worked out on the No. and actual
length of cross sec. Taken.)
II] STREAM
5] Fixing chain and apex stones long the Day 0.75 Kms.
road (on an average 4 to 5 chain stones
and 5 to 6 apex stones in a length of 1
km.) for unit labour
Sr. Item of Work Unit Rate for the
Completed Labour
1 2 3 4 5
-do- in hard murum and boulders 1.5 meter Cum. 417.60 417.60
D 4 / 26 depth.
Fixing survey pegs in earth soil of all sorts, 100 98.80 98.80
D 5 / 26 sand gravel or soft murum etc. complete. Nos.
Sr. Item of Work Unit Rate for the
Completed Labour
1 2 3 4 5
Completed Labour
1 2 3 4 5
Completed Labour
1 2 3 4 5
5] Carrying out plan table Survey of the private / forest land, along the
Completed Labour
1 2 3 4 5
4] Plotting work.
5] Collection of R
E 15 a / a) For 10 Gunthas to 1 Acre Acre 5669.00 2267.60
26
Fly leveling for carrying out bench mark Km. 767.00 220.00
E 27 / 26
Detailed survey of approaches including Km. 2221.00 1317.10
chaining and leveling inclusive of chain and
compass survey along bridge alignment
E 28 / 26 and approaches including closing each
days work.
ASCERTAINING STRATA
=1980*10% =2178.00
Providing tun tappa core boxes of jungle No. 3152.00 --
wood of size 1.25m x 0.35m x 0.15m for
F 3 / 26 preserving core samples with all fixtures
and fastening handles including locking
arrangement etc. complete.
Completed Labour
1 2 3 4 5
1 2 3 4 5
Preparing land plans and land schedule Km. 24559.0 --
including carrying out plane table survey
for Private / Forest land or both side of
road in Rural and Urban areas. The work
of plotting and certificate from T.I.L.R. or
other authorities shall be obtained for
correctness of prepared plans. Tracing
and taking out prints and preparing the
requisite booklets duly bounds ad printing
with all materials etc. Three land plan
booklets along with original tracing shall
be supplied including procurement of
village Maps / Forest land plans rom
concern authorities.
Completed Labour
1 2 3 4 5
Completed Labour
1 2 3 4 5
Completed Labour
1 2 3 4 5
H) NEW ITEMS
Completed Labour
1 2 3 4 5
INDEX
Sr.
Particelars Pages
No.
1 2 3 4
1) Important Notes 2 2
Schedule of rate for construction
2) 3 8
material testing charges
Government of Maharashtra
Vigilance & Quality Control Circle
Pune/ Navi Mumbai/ Nasik/ Amravati/ Aurangabad &
Nagpur
Important Notes
1) The rate Included in this D.S.R. are applicable for all
Divisions and Sub Divisions in P. W. D. Maharashtra State.
For work executed in semi Government and Private
establishments the rate shall be as per Government
Guidelines Issued vide Circular No- AGR 1094/CR-76/N. H. 02
Mantralay,Mumbai - 400 032. (i.e.twice the rate mentioned in
D. S. R.)
Rate
Sr. Name of Test Test Sanction
No
ed Rs
1 2 3 4
BASIC TEST OF CEMENT.
MIX DESIGN.
9 GSB Mix Design. 1 Test 12000.00
10 Wet Mix Macadam Mix Design. 1 Test 12000.00
FINE AGGREGATES.
Rate
Sr.No Name of Test Test Sanction
ed Rs
1 2 3 4
BRICKS
16 Water Absorption (Set of 5 Bricks), 1 Test 1600.00
Compressive Strength( Set of 5 Bricks),
Efflorescence (Set of 5 Bricks).
GLAZED TILES
MANGLORE TILES
Rate
Sr. Name of Test Test Sanction
No
ed Rs
1 2 3 4
MORTOR
STONE/ RUBBLE
SOIL / MURUM
BITUMEN
BITUMINOUS EMULSION
WATER
WOOD
FLUSH DOOR
PLYWOOD
PARTICAL BOARD
75 Determination of Moisture Content, 1 Test 1200.00
Determination of Density
ALUMINIUM SECTION
POLYMER MATERIAL
Rate
Sr.No Name of Test Test Sanction
ed Rs
1 2 3 4
A.C. PIPES
A.C. SHEETS
G.I. PIPES
83 Weight per running meter, 1 Test 200.00
Diameter of pipe & wall thickness of pipe,
84 Weight of Zinc coating per sq. m. 1 Test 250.00
Rate
Sr.No Name of Test Test Sanction
ed Rs
1 2 3 4
OVERLAY DESIGN
111 Benkelman Beam Test (Excluding Dead
Journey Charges) Per Km 11300.00
Important Note:The above rates are applicable for all Division & Subdivision
under P.W.D. & Z.P. in Maharashtra and for other Govertment / Private
Organization the rates shall be twice as mentioned in DSR.
28 FIRE FIGHTING
FIRE FIGHTING WORK SCHEDULE OF RATES
SR. QTY.
DESCRIPTION OF ITEM Rate
NO. NOS
L S N=8/((2*(L/S))+1) (2*NL)+6
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15
13 Patti Plaster 12-15 mm thk 100 mm wide C.M.1:3 Rgm 0.016 0.0015
14 Patti Plaster 12-15 mm thk 150 mm wide C.M.1:3 Rgm 0.024 0.003
2 401 Granular Sub Base One Metal 26.5 mm To 9.50 mm 0.448 35.00
Close graded Gr-II Cum
Metal 9.50 mm To 2.36 mm 0.32 25.00
( Mix in Place
method) Metal below 2.36 mm 0.512 40.00
Total 1.28 100.00
3 401 Granular Sub Base One Metal 9.50 mm To 4.75 mm 0.448 35.00
Close graded Gr-III Cum Metal 4.75 mm To 2.36 mm 0.16 12.50
( Mix in Place
method) Metal below 2.36 mm 0.672 52.50
Total 1.28 100.00
The Contractor shall provide the web application in such a manner that it also updates the data in
real time on PWD's works management e-governance application dashboard.
User friendly software on computer with a parallel PLC man machine interface.
* Automatic cold aggregate feeder controls linked with mix design and hot bin levels.
* PLC Diagnostics system allows for quick trouble location and trouble shooting in the plant.
*SCADA Controls an extension to PLC allow for access & changing system calibration
from remote locations as well
The Contractor shall provide the web application in such a manner that it also updates the data in
real time on PWD's works management e-governance application dashboard.
Intelligent Compactors
The data of All parameters as per IRC SP 97 - 2013 on the intelligent compactor, including
graphic displays shall be replicated on the PWD user Terminal on real time basis (time lag not
more than 15 seconds).
Roller / Compactors shall be intelligent. The intelligent compaction system shall have
compaction analyzer. The compaction analyzer system shall be inbuilt and provided by the
original manufacturer at the time of first sale of the compactor. In no case retro-fitted system
shall be accepted. The compactor shall be fitted with VSAT (Very Small Aperture Terminal).
Arrangement for security of data, Disaster recovery arrangements shall be as per I.T. Industry
practice, during the construction period and upto defect liability period.(DLP). Handing over the
data on the Web Server after DLP in Electronic form as instructed by Engineer In charge.
Calibration of all SCADA related attachments /accessories as per the specification:- Web based
application to monitor the schedule of Calibration of all SCADA related attachment/accessories.
The invalidity of calibration shall lead to non-acceptance of work or measurement and the
Contractor shall not be paid for such non-accepted work or measurements
Submission of printed and authenticated reports to the Engineer Incharge as and when required.
Point (1) to (6) above shall be arranged and maintained during contract period and defect
liability period.
Cost includes rectification, fine tuning, corrections, additions & alterations to the system to the
satisfaction of Engineer Incharge.
Web Connectivity-
The contractor shall provide web connectivity. The web connectivity shall have minimum
1 MBPS internet speed and 100 % availability. Software should be intelligent; The contractor
shall make sure that the entire software and hardware solution is virus free.The data so acquired
shall be uploaded to PWD Website in real time with time lag not more than 30 Seconds .
GIS MAP
Displaying locations of all above Hot mix Plants, Concrete mix Plants, Tippers used for
transportation of the mix and other materials,Roller/ compactor Sprayer and paver on GIS map
and / or Vehicle tracking system is mandatory
Web connectivity to all locations of all above mentioned machineries and transportation, moving
construction equipment , where data is being acquired, transmitted, processed, stored and
retrieved with minimum speed of 1 MPBS and 100 % availability. The contactor shall provide
the web application in such a manner that it shall first update the above data in real timewith time
lag not more than 30 Seconds on PWD’s works monitoring e-governance web application
automatically. The contractor shall put his request to Engineer In Charge to get access to the
PWD e-governance web application.
For all above mentioned machineries, Costs of Web-based application, Computer Software,
Hardware etc. to transmit, process, store and retrieve the data in the forms and formats as
prescribed by the Engineer In charge, are included.