K.Arun& G.Madhusudhan for their enthusiastic support and guidance extended by them without which this project would not have been completed with any degree of success.
We also thankN.C.Kotaiah, Head of the
Department, Electrical and Electronics Engineering for providing us this opportunity to carry out our project work.
We also express our sincere thanks toprof.
N.Lakshmi Narayana, principal, SRI CHUNDI RANGANAYAKULU ENGINEERING COLLEGE for providing an opportunity to successfully complete the project work.
We are also thankful to the department of Electrical
and Electronics Engineering for providing excellent guidance for the fulfillment of the project.
We express our gratitude to Mr. D.J. Ramesh
garu, Chairman & Managing Director, Vijai Electricals for allowing us to do the project in their organization. ABSTRACT
In the field of electricity, transformer plays a vital role and it is the
Lifeline and integral part of electrical transmission and distribution system. It is a simple static device operating on the principle of electro- magnetic induction. Its function is to transform power at same frequency from one part of the circuit to another.
The transformer is used as an important component in the power system
for the following two main reasons:
•Minimize transmission and distribution losses by adopting
appropriate transmission and distribution voltages, and •To facilitate availability of power to individual consumers at the voltages they desire for their systems.
As a part of the project design of a three-phase transformer was done
and its performance evaluation was judged by comparing the results.
Testing was done on a three phase distribution transformer
and the parameters like resistance, no load loss, load loss, impedance voltages were measured, which were taken as input and the efficiency at different loads and regulation at UPF and 0.8 PF were calculated.
The results thus obtained were compared with the
guaranteed technical particulars and the performance of the transformer was evaluated. ORGANISATION PROFILE VIJAI ELECTRICALS Ltd started manufacturing transformers since 1972. It is known for its best quality in manufacturing. It manufactures transformers from 5KVA to 10MVA. Types of transformers manufactured here are: - Oil filled single phase Three phase Dry type CRT (cast resin transformer) Three phase. BEST EXPORT PERFORMANCE: - Vijai Electricals Ltd. embarked on ventures of export to foreign countries and a substantial percentage of the sales are constituted by exports. The Organization has undaunted history of exports to its credit. The Government of India recognized it as the ‘Export House’ in the year 1994. Government of India recognized the Organization as the ‘Trading House’ in the year 1997. It exports transformers to Philippines and Bangladesh in bulk.