Professional Documents
Culture Documents
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
2. Dense Sand
Unit weight : = 16.53 kN/m3
Angle of internal friction : ef = 35.00 °
Cohesion of soil : cef = 1.00 kPa
Oedometric modulus : Eoed = 59.27 MPa
Saturated unit weight : sat = 16.53 kN/m3
Coefficient : k = 11578.00 MN/m3
Angle of dispersion : = 15.00 °
3. V. Dense Sand
Unit weight : = 18.00 kN/m3
Angle of internal friction : ef = 37.00 °
Cohesion of soil : cef = 1.00 kPa
Oedometric modulus : Eoed = 109.64 MPa
Saturated unit weight : sat = 18.00 kN/m3
Coefficient : k = 21420.00 MN/m3
Angle of dispersion : = 15.00 °
Sandstone
Unit weight : = 23.00 kN/m3
Angle of internal friction : ef = 45.00 °
Cohesion of soil : cef = 1000.00 kPa
Oedometric modulus : Eoed = 222.22 MPa
Saturated unit weight : sat = 23.00 kN/m3
Coefficient : k = 57891.00 MN/m3
Angle of dispersion : = 15.00 °
1
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
Construction
2
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
3
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
3
(1.00,-1.00)
3.47 2
+x
(-1.00,0.00)
+y
1
(1.00,1.00)
3.47
Geometry
Concrete : C 40/50
Cylinder compressive strength fck = 40.00 MPa
Tensile strength fctm = 3.50 MPa
Elasticity modulus Ecm = 35000.00 MPa
Shear modulus G = 14583.00 MPa
Longitudinal steel : B500
Yield strength fyk = 500.00 MPa
Transverse steel: B500
Yield strength fyk = 500.00 MPa
Determination of vertical springs
Typical load (for analysis of vertical springs) : Scenario1 - Load Case No. 1
4
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
5 - 15.00 .. Sandstone
12.00
10.00
24.00
3.00 0.00
1
6.00 5.00
2
3.00 10.00
3
3.00
+z
4
15.00
5 20.00
25.00
-28.00
-25.00
-20.00
-15.00
-10.00
-5.00
0.00
5.00
10.00
15.00
20.00
22.00
Load
Load N Mx My Hx Hy Mz
No. Name Type
new change [kN] [kNm] [kNm] [kN] [kN] [kNm]
1 Yes Scenario1 - Load Case No. 1 Service 10.00 0.00 0.00 0.00 31.21 0.00
2 Yes Scenario1 - Load Case No. 2 Service 10.00 0.00 0.00 29.93 8.85 0.00
3 Yes Scenario1 - Load Case No. 3 Service 10.00 0.00 0.00 16.98 26.19 0.00
4 Yes Scenario1 - Load Case No. 4 Service 10.00 0.00 0.00 20.30 23.71 0.00
5 Yes Scenario2 - Load Case No. 1 Service 10.00 0.00 0.00 0.00 67.50 0.00
6 Yes Scenario2 - Load Case No. 2 Service 10.00 0.00 0.00 64.73 19.15 0.00
7 Yes Scenario2 - Load Case No. 3 Service 10.00 0.00 0.00 36.72 56.64 0.00
8 Yes Scenario2 - Load Case No. 4 Service 10.00 0.00 0.00 43.89 51.28 0.00
9 Yes Mooring - Load Case No. 1 Service 10.00 0.00 0.00 0.00 50.00 0.00
10 Yes Mooring - Load Case No. 2 Service 10.00 0.00 0.00 47.95 14.18 0.00
5
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
Load N Mx My Hx Hy Mz
No. Name Type
new change [kN] [kNm] [kNm] [kN] [kN] [kNm]
11 Yes Mooring - Load Case No. 3 Service 10.00 0.00 0.00 27.20 41.95 0.00
12 Yes Mooring - Load Case No. 4 Service 10.00 0.00 0.00 32.51 37.98 0.00
13 Yes Wave - Load Case No. 1 Service 10.00 0.00 0.00 0.00 95.00 0.00
14 Yes Wave - Load Case No. 2 Service 10.00 0.00 0.00 91.10 26.95 0.00
15 Yes Wave - Load Case No. 3 Service 10.00 0.00 0.00 51.68 79.71 0.00
16 Yes Wave - Load Case No. 4 Service 10.00 0.00 0.00 61.78 72.17 0.00
Ground water table
The ground water table is at a depth of -10.00 m from the original terrain.
Global settings
Analysis type : spring method
Type of pile : floating piles - compute the stiffness of springs from soil parameters
Connection piles / pile cap : fixed
Modulus of reaction : linear
Analysis results
Maximum internal forces (all load cases)
6
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
7
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
8
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
9
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
10
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
11
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
12
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
13
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
14
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
15
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
16
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
Verification No. 1
Dimensioning of piles - input data
Analysis carried out with an automatic selection of the most unfavorable LC.
Reinforcement designed for all piles in the group.
17
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
30.57
189.10
72.30
-132.36 94.25
Pile verification
Input data
Settings
(input for current task)
Materials and standards
Concrete structures : EN 1992-1-1 (EC2)
Coefficients EN 1992-1-1 : standard
Steel structures : EN 1993-1-1 (EC3)
Partial factor on bearing capacity of steel cross section : M0 = 1.00
Timber structures : EN 1995-1-1 (EC5)
Partial factor for timber property : M = 1.30
Modif. factor of load duration and moisture content : kmod = 0.50
Coeff. of effective width for shear stress : kcr = 0.67
Pile
Analysis for drained conditions : NAVFAC DM 7.2
Load settlement curve : linear (Poulos)
Horizontal bearing capacity : Elastic subsoil (p-y method)
Verification methodology : according to EN 1997
Design approach : 2 - reduction of actions and resistances
18
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
ef K cu
No. Name Pattern
[°] [°] [–] [kPa] [–]
4 Sandstone 45.00 - - - -
Soil parameters
1. Loose Silty Sand
Unit weight : = 14.39 kN/m3
Poisson's ratio : = 0.33
19
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
2. Dense Sand
Unit weight : = 16.53 kN/m3
Poisson's ratio : = 0.33
Oedometric modulus : Eoed = 59.27 MPa
Saturated unit weight : sat = 16.53 kN/m3
Angle of internal friction : ef = 35.00 °
3. V. Dense Sand
Unit weight : = 18.00 kN/m3
Poisson's ratio : = 0.33
Oedometric modulus : Eoed = 109.64 MPa
Saturated unit weight : sat = 18.00 kN/m3
Angle of internal friction : ef = 37.00 °
Sandstone
Unit weight : = 23.00 kN/m3
Poisson's ratio : = 0.20
Oedometric modulus : Eoed = 222.22 MPa
Saturated unit weight : sat = 23.00 kN/m3
Angle of internal friction : ef = 45.00 °
Geometry
Pile profile: pipe pile
Dimensions
Diameter d = 0.51 m
Length l = 24.00 m
Thickness t = 20.0 mm
Coeff. of base reduction c = 1.00
Calculated cross-sectional characteristics
Area A = 3.08E-02 m2
Moment of inertia I = 9.26E-04 m4
Location
Off ground height h = 0.00 m
Depth of finished grade hz = 0.00 m
Technology: Driven piles
Material of structure
Unit weight = 24.00 kN/m3
Analysis of concrete structures carried out according to the standard EN 1992-1-1 (EC2).
Concrete : C 40/50
Cylinder compressive strength fck = 40.00 MPa
Tensile strength fctm = 3.50 MPa
Elasticity modulus Ecm = 35000.00 MPa
Shear modulus G = 14583.00 MPa
20
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
5 - 15.00 .. Sandstone
Load
Load N Mx My Hx Hy
No. Name Type
new change [kN] [kNm] [kNm] [kN] [kN]
1 Yes LC 1 Service 392.40 0.00 0.00 0.00 0.00
2 Yes LC 2 Service -279.43 0.00 0.00 0.00 0.00
Ground water table
The ground water table is at a depth of -10.00 m from the original terrain.
Global settings
Analysis of vertical bearing capacity : analytical solution
Analysis type : analysis for drained conditions
21
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
22
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Steel Pile Group Analysis
Perinding ZAR Sdn. Bhd. / Dr. Esam Analysis of deformation and pile group dimensioning
0.51
OG FG
1(1)
2(2)
3(3)
24.00
4(4)
5(5)
23
[GEO5 - Pile Group | version 5.2019.80.0 | hardware key 5 / 10 | Copyright © 2019 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]