Professional Documents
Culture Documents
Title of the Programme Course No. & Dates Course Fee Page
Course Content :
q Basics of Hydraulics.
q Principle and Construction of Hydraulic Pumps.
q Principle and Construction of Valves.
q Principle and Construction of Logic & Mobile Valves.
q Principle and working of Proportional & Servo Valves.
q Practical exercises in Assembly and Testing of
Hydraulic Pumps, Valves and Systems.
q Principle, Construction & Working of
Hydraulic Cylinders and Hydraulic Motors.
q Hydraulic System Accessories.
q Hydraulic Circuits.
q Hydraulic fluids, Contamination and Filtration. Venue & Registration :
q Maintenance and Trouble Shooting.
For our Venue details,
Please refer Page No.16
Schedule for April 2018 - March 2019 :
i) Course No. BH-155/18 : 05-11 Apr 2018
ii) Course No. BH-156/18 : 07-13 June 2018 Registration details,
iii) Course No. BH-157/18 : 05-11 July 2018 please refer Page No.13
iv) Course No. BH-158/18 : 02-08 Aug 2018
v) Course No. BH-159/18 : 04-10 Oct 2018
vi) Course No. BH-160/18 : 06-12 Dec 2018
vii) Course No. BH-161/19 : 03-09 Jan 2019
Course Fee :
Fee includes
¨ Comprehensive Course material
ä Lunch, Refreshments & Tea/Coffee during the course.
Note : Discounts for multiple participation for a course is as follows :
2 participants - 5 % discount
3 & above participants - 10 % discount
Course Content :
a. Basic course
þ Similar to “6-Day Comprehensive course on Hydraulics”.
b. Advanced course
þ Performance characteristics of Pumps, Valves,
Actuators & systems.
þ Knowledge and information related to
Enhancing productivity.
þ Knowledge and information related to improving the
performance of the Hydraulic System.
þ Designing a Hydraulic Circuit, to give optimum utility.
þ Calculation of several types of actuator movements,
by understanding the process.
þ Detailed discussion of Case Studies of several applications.
þ Advantages & disadvantages of using different hydraulic circuits.
Why Advanced knowledge is required :
A deeper understanding of the working of Machines and Hydraulic Systems is necessary for the following
categories of personnel :-
Methodology :
Extensive theoretical & practical concepts on technology through Audio Visuals,
Case Studies and real-life applications.
Registration details,
please refer Page No.13
Course Fee :
Fee includes
¨ Comprehensive Course material
ä Lunch, Refreshments & Tea/Coffee during the course.
Note 1 : Discounts for multiple participation for a course is as follows :
2 participants - 5 % discount
3 & above participants - 10 % discount
Note 2 : For the above Combo course, 10% discount is applicable for participants who have attended
our “6-Day Comprehensive Course on Hydraulics” at Bangalore.
This discount cannot be clubbed with other discounts.
Course Content :
q Review of Basics of hydraulics
q Open loop System
- Fixed pumps vs Variable displacement pumps
- Pressure cut-off, Load sensing, Power limiters.
q Closed loop pumping systems and
Hydrostatic Transmission
q Mobile control valves, Electro prop. mobile valves,
Joystick controls.
q Hydrostatic Steering systems.
q Practical demo on assembly & testing of Load sensing pumps.
q Demo of Closed loop pumps, Bent axis piston pumps & motors,
Electro prop valves with Joystick control & Rotary coupling.
q Demo on analysis of piston pump failures.
q Various types of Mobile / Construction equipment and their typical circuits.
q Hydraulic fluid filtration for Mobile / Construction equipment
q Maintenance & Troubleshooting of Mobile Equipment Hydraulic systems.
OEMs of Mobile / Construction Equipment will also immensely benefit, as this training will be a
stepping stone for your own specific equipment training.
Venue & Registration :
Schedule for April 2018 - March 2019 :
For our Venue details,
i) Course No. MH-27/18 : 18-21 June 2018
Please refer Page No.16
ii) Course No. MH-28/18 : 03-06 Sept 2018
iii) Course No. MH-29/19 : 18-21 Feb 2019 Registration details,
please refer Page No.13
Course Fee :
Fee includes
¨ Comprehensive Course material
ä Lunch, Refreshments & Tea/Coffee during the course.
Note : Discounts for multiple participation for a course is as follows :
2 participants - 5% discount
3 & above participants - 10 % discount
Course Content :
q Review of Basics of hydraulics
q Axial Piston Units
q Closed loop pumping systems and Hydrostatic Transmission
q Control valves
- Proportional control valve
- Joystick control
q Application of Hydraulic control system & their circuitry in
- Offshore drilling equipment (Top drive, BOP, Derrick etc.)
- Exploration (Winches, Cranes)
- Marine (Steering / Propeller Drives)
q Hydraulic fluid filtration for Marine / Offshore equipment
q Maintenance & Troubleshooting of Marine / Offshore equipment hydraulic systems.
Registration details,
please refer Page No.13
Course Fee :
Fee includes
¨ Comprehensive Course material
ä Lunch, Refreshments & Tea/Coffee during the course.
Note : Discounts for multiple participation for a course is as follows :
2 participants - 5 % discount
3 & above participants - 10 % discount
Course Content :
q Review of Basics of hydraulics
q Overview of Hydraulics technology used in
Machine Tool application such as SPM, GPM & CNC
q ENERGY SAVING techniques such as:
i. Inverter control / Variable Frequency Drive (VFD)
ii. Servo Drive
q Study of typical Hydraulic circuits used in Machine tool
application such as Clamping, Counter balancing etc.
q In Machine tool application use of Electro Hydraulic
Proportional & Servo valve.
q Maintenance & Troubleshooting of Hydraulic system
used in Machine tool application.
Registration details,
please refer Page No.13
Course Fee :
Fee includes
¨ Comprehensive Course material
ä Lunch, Refreshments & Tea/Coffee during the course.
Note : Discounts for multiple participation for a course is as follows :
2 participants - 5 % discount
3 & above participants - 10 % discount
Course Content :
q Overview of Electrical & Electronics principle.
q Review of Basics of hydraulics.
q Introduction to Proportional & Servo valve Hydraulics.
q Principle, Construction & Working of
Proportional Pressure control valve, Flow control valve
q Principle, Construction & Working of Combination
Proportional valve i.e. Pressure & Flow control valve,
Directional & Flow control valve
q Electronic interface Amplifiers which are used for driving
Proportional valve & Servo valve.
q Maintenance & Trouble Shooting of Proportional control systems
Registration details,
please refer Page No.13
Course Fee :
Fee includes
¨ Comprehensive Course material
ä Lunch, Refreshments & Tea/Coffee during the course.
Note : Discounts for multiple participation for a course is as follows :
2 participants - 5 % discount
3 & above participants - 10 % discount
Course Content :
q Review of Basics of hydraulics
q Hydraulic application in Steel Mills such as
melting furnaces, rolling mills, AGC control,
Continuous casting etc.
q Proportional and Servo valve application in Steel Mill.
q Typical hydraulic circuits used in Steel Mill application
& their operation
q Maintenance & Troubleshooting of hydraulic systems
used in Steel Mill
Registration details,
please refer Page No.13
Course Fee :
Fee includes
¨ Comprehensive Course material
ä Lunch, Refreshments & Tea/Coffee during the course.
Note : Discounts for multiple participation for a course is as follows :
2 participants - 5 % discount
3 & above participants - 10 % discount
Course Content :
q Review of Basics of hydraulics
q Overview of Hydraulic control systems
in Hydropower Plant
q Study of typical Hydraulic circuits used in
Hydropower applications such as
m Turbine governor control
(Pelton, Kaplan, Francis and Bulb types)
m Main Inlet Valve (MIV) control
m Dam gate control
m Generator lubrication systems etc.
q Application of Electro Hydraulic Proportional &
Servo valve in Hydropower Plant
q Maintenance & Troubleshooting of Hydraulic system
used in Hydropower Plant.
Registration details,
please refer Page No.13
Course Fee :
Fee includes
¨ Comprehensive Course material
ä Lunch, Refreshments & Tea/Coffee during the course.
Note : Discounts for multiple participation for a course is as follows :
2 participants - 5 % discount
3 & above participants - 10 % discount
Introduction :
In-house training programmes are also conducted at
Customers’ premises based on their requirements.
Training Dates :
Training dates will be finalised based on mutually convenient dates, keeping in view the courses
already planned (as per this brochure).
Payment of Fee :
Company Location
Druk Green Power Corporation Ltd Bhutan
CEAT Kelani International Tyres (Pvt) Ltd Sri Lanka
Goltens Singapore P.L. Singapore
Camso Loadstar Sri Lanka
Nepal Hydro & Electric Ltd Nepal
Salvagnini UAE
Rapid Solutions Ltd - Fluid Power Division Azerbaijan
Schlumberger Dubai
Seadrill Dubai
What do our participants have to say ....
Appreciate the way of presentations, encouraging all the participants and clarifying the doubts of
every individual
- Mr.Shankar S N.
Quality Engineer, INDUS UTH HF Mixing System Pvt. Ltd., Bangalore
Training course is very relevant to our plant. All sessions were easily understood. Theory sessions
are always linked to practical.
- Mr. Wangchuk.
Junior Engineer, Turbine Maintenance Unit, Chhukha Hydropower Plant, Bhutan
Schedule of the course was from basic and then elaborates into a full fledge system. The flow of
the course was very good. The practical session after theory session was really helpful in
understanding the concept well. The shop floor visit was also good.
- Mr. Diwakar Prasad.
Dy. Engineer, Telecom & Broadcast Systems, BEL, Bangalore.
The training programme with a good mix of theory and practicals along with factory visit is good
combination. The course is very educative and informative.
- Mr. Damodar Bhandari
Dy. Executive Engineer, Chhukha Hydro power Plant, Bhutan
Most of the things were very much linked to the work associated with my job profile. It was very
good experience for me to know the various valves closely.
- Mr. Gurvindar Singh
GET, John Deere India Pvt Ltd, Pune
Animated slides are very useful to learn the working of all components in the hydraulic system.
Also appreciate the presentation skills.
- Mr.Keshavamurthy H
Tech - B, Telecom & Broadcast Systems, BEL, Bangalore.
Every topic was comprehensively covered and was very good learning experience for us.
- Mr. Shekhar Suman
Dy. Manager, NMDC Ltd, Bacheli
Yuken Hyd. Trg. Location
Venue :
Yuken India Ltd
B-80, 2nd Cross, 1st Phase
Peenya Industrial Area,
Bengaluru- 560 058
Karnataka,
INDIA
Highlights of Venue :
Training center constructed with spacious training hall & practical area.
Close proximity to Peenya Industry Metro Station (10 minutes walk).
Excellent connectivity from City Center (Majestic) by Metro train with frequency every 6 minutes.
(22 min travel by Metro train from Kempegowda Interchange to Peenya Industry metro station).
Wide tariff range Hotels available at City Center (Majestic). Useful link:http://english.bmrc.co.in/
City Railway Station and State & City Bus Station located in City Center (Majestic).
Good connectivity from Airport to Peenya 1st phase & City Center (Majestic) by Airport Volvo buses.
Useful link:http://english.bmrc.co.in/
(Leading manufacturers of
Oil Hydraulic equipments)
Web : www.yukenindia.com/hydraulicstraining
Registration : www.yukenindia.com/register