Professional Documents
Culture Documents
Functional description
Property Value
Beamforming No
FHDI interfaces
https://telecomeengineer.blogspot.com/
TELECOM SOFTWARE
TELECOM SOLUTION NETWORK PROJECT
FHDI interfaces
Interface Label on the HW Number of Connector type Additional info
interfaces
https://telecomeengineer.blogspot.com/
TELECOM SOFTWARE
TELECOM SOLUTION NETWORK PROJECT
RRH Filter
TX
PA Filte
VSWR
TX r Tx/Rx
Det ANT 1
RX
Optical IF Filter
RF LNA
control
TX
PA Filter
VSWR
Tx/Rx
Optical IF RX Det ANT 2
RX
Filter
LNA
DC•IN
PSU
BW extension
Electrical specifications
Property Value
Nominal supply voltage -48.0 V DC
Nominal input voltage range -40.5 V DC to -57.0 V DC
Extended input voltage range -36.0 V DC to -40.5 V DC
-57.0 V DC to -60.0 V DC
Power consumption g Note: FHDI power consumption values will be provided in future releases.
• Wall installation
https://telecomeengineer.blogspot.com/
TELECOM SOFTWARE
TELECOM SOLUTION NETWORK PROJECT
https://telecomeengineer.blogspot.com/
TELECOM SOFTWARE
TELECOM SOLUTION NETWORK PROJECT
Environmental specifications
Property Value
https://telecomeengineer.blogspot.com/
TELECOM SOFTWARE
TELECOM SOLUTION NETWORK PROJECT
Before turning RF power on, RF ports have to be terminated by nominal 50 Ω load (for example, feeder with
antenna). However, if these conditions are not met, the plastic caps that are delivered within the unused RF ports
should remain in place. The plastic caps isolate RF power from the environment, and thus provide electric shock
security in case RF power is accidentally on.
w NOTICE: The RRH without fan should always be mounted in a vertical orientation with connectors on the bottom side
to ensure convection cooling.
g Note: The minimum start-up voltage is -40.5 V DC. If the input voltage is below/beyond the extended limits, the unit
might shut down.
https://telecomeengineer.blogspot.com/