Professional Documents
Culture Documents
CONTENTS
Click on a button
Other spreadsheets:
STEEL BEAM FOR MICROSOFT EXCEL
This spreadsheet performs an analysis and design of simply supported and
cantilever, steel beams bending about their X-X axis and subjected to gravity
loads. Beams can be either with full restraint or without full restraint. Design is in
accordance with BS 5950-1:1990. Bending moments, shear forces and
deflections are computed at 1/60th positions along the span and the maximums
of these values are used for the design. This spreadsheet also contains a
calculation sheet for checking local web bearing and buckling. The spreadsheet
uses UK steel section properties which have been directly obtained from the
Corus Construction Manual, released on CD in February 2000.
Other spreadsheets:
BAR SCHEDULE FOR EXCEL 97
Bar Schedule for Excel 97 is a spreadsheet for the scheduling of steel for the
reinforcement of concrete. The spreadsheet has been developed to comply with
BS 4466 : 1989 and Amendment No. 1 published 28 February 1990.
The aim of the spreadsheet is to reduce the time taken to produce a bar
schedule, reduce arithmetical errors, reduce scheduling errors, increase
compliance with the BSI specified format for bar scheduling and, eventually,
become the basis for electronic data interchange.
The aim of the spreadsheet is to reduce the time taken to produce a bar
schedule, reduce arithmetical errors, reduce scheduling errors, increase
compliance with the BSI specified format for bar scheduling and, eventually,
become the basis for electronic data interchange.
Monopitch coefficients
Hipped coefficients
Internal Pressure
Tables
Notes
About
Click on a button
Other spreadsheets:
BAR SCHEDULE 8666 FOR MICROSOFT EXCEL
Bar Schedule 8666 for Microsoft Excel is a spreadsheet for the scheduling of
steel for the reinforcement of concrete. The spreadsheet has been developed to
comply with BS 8666 : 2000.
The aim of the spreadsheet is to reduce the time taken to produce a bar
schedule, reduce arithmetical errors, reduce scheduling errors, increase
compliance with the BSI specified format for bar scheduling and, eventually,
become the basis for electronic data interchange.
II
III
✘
Building orientation Wind directions
unknown
Nearby buildings
✘
ignored
Wind Direction
I II III IV
180 270 360 90
Direction factor Sd 1.000 1.000 1.000 1.000
Site Wind Speed (m/s) Vs 30.00 30.00 30.00 30.00 equ (8)
6 6 6 6
20 20 20 20
Effective Height (m) He 50.00 50.00 50.00 50.00
II
III
Building orientation
✘
unknown
Nearby buildings Wind directions
ignored
Wind Direction
I II III IV
Wind direction غ 25 115 205 295
Direction factor Sd 0.807 0.817 1.000 0.997
Site Wind Speed (m/s) Vs 31.10 31.49 38.56 38.43 equ (8)
8.4m
4.2m
0.63m
End of wall
A B C D h
Wall Elevation
Page No
24
24.5
22.5
28
28.5
30.5
al information refer to
S 6399 : Part 2 : 1997
Direction Factor
D i re c tio n fa c to r, S d
IV غ 8 0.767
9 0.765
10 0.763
11 0.762
12 0.760
1.10
13 0.758
14 0.757 1.00
II
III 15 0.755 0.90
16 0.753 0.80
17 0.752 0.70
18 0.750 0.60
19 0.748 0.50
20 0.747
0.40
21 0.745
22 0.743 Degrees
23 0.742
24 0.740
25 0.738
26 0.737
27 0.735
28 0.733
29 0.732
30 0.730
31 0.730
32 0.730
33 0.730
34 0.730
35 0.730
36 0.730
37 0.730
38 0.730
39 0.730
40 0.730
41 0.730
42 0.730
43 0.730
44 0.730
45 0.730
46 0.730
47 0.730
48 0.730
49 0.730
50 0.730
51 0.730
52 0.730
53 0.730
54 0.730
55 0.730
56 0.730
57 0.730
58 0.730
59 0.730
60 0.730
61 0.730
62 0.731
63 0.731
64 0.731
65 0.732
66 0.732
67 0.732
68 0.733
69 0.733
70 0.733
71 0.734
72 0.734
73 0.734
74 0.735
75 0.735
76 0.735
77 0.736
78 0.736
79 0.736
80 0.737
81 0.737
82 0.737
83 0.738
84 0.738
85 0.738
86 0.739
87 0.739
88 0.739
89 0.740
90 0.740
91 0.740
92 0.739
93 0.739
94 0.739
95 0.738
96 0.738
97 0.738
98 0.737
99 0.737
100 0.737
101 0.736
102 0.736
103 0.736
104 0.735
105 0.735
106 0.735
107 0.734
108 0.734
109 0.734
110 0.733
111 0.733
112 0.733
113 0.732
114 0.732
115 0.732
116 0.731
117 0.731
118 0.731
119 0.730
120 0.730
121 0.732
122 0.735
123 0.737
124 0.739
125 0.742
126 0.744
127 0.746
128 0.749
129 0.751
130 0.753
131 0.756
132 0.758
133 0.760
134 0.763
135 0.765
136 0.767
137 0.770
138 0.772
139 0.774
140 0.777
141 0.779
142 0.781
143 0.784
144 0.786
145 0.788
146 0.791
147 0.793
148 0.795
149 0.798
150 0.800
151 0.802
152 0.803
153 0.805
154 0.807
155 0.808
156 0.810
157 0.812
158 0.813
159 0.815
160 0.817
161 0.818
162 0.820
163 0.822
164 0.823
165 0.825
166 0.827
167 0.828
168 0.830
169 0.832
170 0.833
171 0.835
172 0.837
173 0.838
174 0.840
175 0.842
176 0.843
177 0.845
178 0.847
179 0.848
180 0.850
181 0.853
182 0.855
183 0.858
184 0.861
185 0.863
186 0.866
187 0.869
188 0.871
189 0.874
190 0.877
191 0.879
192 0.882
193 0.885
194 0.887
195 0.890
196 0.893
197 0.895
198 0.898
199 0.901
200 0.903
201 0.906
202 0.909
203 0.911
204 0.914
205 0.917
206 0.919
207 0.922
208 0.925
209 0.927
210 0.930
211 0.932
212 0.935
213 0.937
214 0.939
215 0.942
216 0.944
217 0.946
218 0.949
219 0.951
220 0.953
221 0.956
222 0.958
223 0.960
224 0.963
225 0.965
226 0.967
227 0.970
228 0.972
229 0.974
230 0.977
231 0.979
232 0.981
233 0.984
234 0.986
235 0.988
236 0.991
237 0.993
238 0.995
239 0.998
240 1.000
241 1.000
242 0.999
243 0.999
244 0.999
245 0.998
246 0.998
247 0.998
248 0.997
249 0.997
250 0.997
251 0.996
252 0.996
253 0.996
254 0.995
255 0.995
256 0.995
257 0.994
258 0.994
259 0.994
260 0.993
261 0.993
262 0.993
263 0.992
264 0.992
265 0.992
266 0.991
267 0.991
268 0.991
269 0.990
270 0.990
271 0.987
272 0.985
273 0.982
274 0.979
275 0.977
276 0.974
277 0.971
278 0.969
279 0.966
280 0.963
281 0.961
282 0.958
283 0.955
284 0.953
285 0.950
286 0.947
287 0.945
288 0.942
289 0.939
290 0.937
291 0.934
292 0.931
293 0.929
294 0.926
295 0.923
296 0.921
297 0.918
298 0.915
299 0.913
300 0.910
301 0.907
302 0.904
303 0.901
304 0.898
305 0.895
306 0.892
307 0.889
308 0.886
309 0.883
310 0.880
311 0.877
312 0.874
313 0.871
314 0.868
315 0.865
316 0.862
317 0.859
318 0.856
319 0.853
320 0.850
321 0.847
322 0.844
323 0.841
324 0.838
325 0.835
326 0.832
327 0.829
328 0.826
329 0.823
330 0.820
331 0.819
332 0.817
333 0.816
334 0.815
335 0.813
336 0.812
337 0.811
338 0.809
339 0.808
340 0.807
341 0.805
342 0.804
343 0.803
344 0.801
345 0.800
346 0.799
347 0.797
348 0.796
349 0.795
350 0.793
351 0.792
352 0.791
353 0.789
354 0.788
355 0.787
356 0.785
357 0.784
358 0.783
359 0.781
360 0.780
Home
Direction factor, Sd
Wind Directions
II III IV
Ø+90º Ø+180º Ø+270º
269° 359° 89°
1.000 0.868 0.763
Degrees
Effective Heights in Towns
Ho
Building under
Wind consideration
Effective Height, He
Hr Ho X He
m m m m
50 0 0 50
Home
Building under Hr
consideration
Topographic Location Factor, s
s
0.967 equ G.1
s
s Site altitude, DS 150
0.971 equ G.4 Base altitude, DT 50
Location factor, s 0.967
ents 1 + 0.001DS 1.15
s 1 + 0.001DT +1.2yes 1.19505
0.841 equ G.7 Altitude factor, Sa 1.19505
Terrain and Building Factor
He Distance Terrain Sb
m km
50 10 town 2.040
Note
Sb values obtained through
logarithmic interpolation.
ard method
Site in town
Closest distance to sea, km
0.1 2 10 100
1.48 1.18 1.15 1.07
1.48 1.18 1.15 1.07
1.65 1.50 1.45 1.36
1.78 1.73 1.69 1.58
1.85 1.85 1.82 1.71
1.90 1.90 1.89 1.77
1.96 1.96 1.96 1.85
2.04 2.04 2.04 1.95
2.12 2.12 2.12 2.07
Size Effect Factor
10 31.6227766017100316.2277660168
1000
ard method
Site in town
losest distance to sea, km
10 100
A B
A B
A B
B B
B B
C C
C C
C C
C C
Enter a 5
Table 9 External pressure coefficients Cpe for monopitch roo
Zone
Pitch
Ø = 0° Ø = 90°
angle a
A B C AU AL
5 -1.80 -1.20 -0.60 -2.20 -2.10
6 -1.75 -1.16 -0.57 -2.26 -2.05
7 -1.70 -1.12 -0.54 -2.32 -2.00
8 -1.65 -1.08 -0.51 -2.38 -1.95
9 -1.60 -1.04 -0.48 -2.44 -1.90
10 -1.55 -1.00 -0.45 -2.50 -1.85
11 -1.50 -0.96 -0.42 -2.56 -1.80
12 -1.45 -0.92 -0.39 -2.62 -1.75
13 -1.40 -0.88 -0.36 -2.68 -1.70
14 -1.35 -0.84 -0.33 -2.74 -1.65
15 -1.30 0.20 -0.80 0.20 -0.30 0.20 -2.80 -1.60
16 -1.29 0.24 -0.78 0.22 -0.29 0.21 -2.73 -1.58
17 -1.27 0.28 -0.76 0.24 -0.29 0.23 -2.65 -1.56
18 -1.26 0.32 -0.74 0.26 -0.28 0.24 -2.58 -1.54
19 -1.25 0.36 -0.72 0.28 -0.27 0.25 -2.51 -1.52
20 -1.23 0.40 -0.70 0.30 -0.27 0.27 -2.43 -1.50
21 -1.22 0.44 -0.68 0.32 -0.26 0.28 -2.36 -1.48
22 -1.21 0.48 -0.66 0.34 -0.25 0.29 -2.29 -1.46
23 -1.19 0.52 -0.64 0.36 -0.25 0.31 -2.21 -1.44
24 -1.18 0.56 -0.62 0.38 -0.24 0.32 -2.14 -1.42
25 -1.17 0.60 -0.60 0.40 -0.23 0.33 -2.07 -1.40
26 -1.15 0.64 -0.58 0.42 -0.23 0.35 -1.99 -1.38
27 -1.14 0.68 -0.56 0.44 -0.22 0.36 -1.92 -1.36
28 -1.13 0.72 -0.54 0.46 -0.21 0.37 -1.85 -1.34
29 -1.11 0.76 -0.52 0.48 -0.21 0.39 -1.77 -1.32
30 -1.10 0.80 -0.50 0.50 -0.20 0.40 -1.70 -1.30
31 -1.10 0.80 -0.49 0.51 0.42 -1.69 -1.30
32 -1.10 0.80 -0.47 0.51 0.44 -1.67 -1.30
33 -1.10 0.80 -0.46 0.52 0.46 -1.66 -1.30
34 -1.10 0.80 -0.45 0.53 0.48 -1.65 -1.30
35 -1.10 0.80 -0.43 0.53 0.50 -1.63 -1.30
36 -1.10 0.80 -0.42 0.54 0.52 -1.62 -1.30
37 -1.10 0.80 -0.41 0.55 0.54 -1.61 -1.30
38 -1.10 0.80 -0.39 0.55 0.56 -1.59 -1.30
39 -1.10 0.80 -0.38 0.56 0.58 -1.58 -1.30
40 -1.10 0.80 -0.37 0.57 0.60 -1.57 -1.30
41 -1.10 0.80 -0.35 0.57 0.62 -1.55 -1.30
42 -1.10 0.80 -0.34 0.58 0.64 -1.54 -1.30
43 -1.10 0.80 -0.33 0.59 0.66 -1.53 -1.30
44 -1.10 0.80 -0.31 0.59 0.68 -1.51 -1.30
45 -1.10 0.80 -0.30 0.60 0.70 -1.50 -1.30
46 0.80 0.61 0.71 -1.48 -1.29
47 0.80 0.63 0.71 -1.46 -1.29
48 0.80 0.64 0.72 -1.44 -1.28
49 0.80 0.65 0.73 -1.42 -1.27
50 0.80 0.67 0.73 -1.40 -1.27
51 0.80 0.68 0.74 -1.38 -1.26
52 0.80 0.69 0.75 -1.36 -1.25
53 0.80 0.71 0.75 -1.34 -1.25
54 0.80 0.72 0.76 -1.32 -1.24
55 0.80 0.73 0.77 -1.30 -1.23
56 0.80 0.75 0.77 -1.28 -1.23
57 0.80 0.76 0.78 -1.26 -1.22
58 0.80 0.77 0.79 -1.24 -1.21
59 0.80 0.79 0.79 -1.22 -1.21
60 0.80 0.80 0.80 -1.20 -1.20
61 0.80 0.80 0.80 -1.20 -1.20
62 0.80 0.80 0.80 -1.20 -1.20
63 0.80 0.80 0.80 -1.20 -1.20
64 0.80 0.80 0.80 -1.20 -1.20
65 0.80 0.80 0.80 -1.20 -1.20
66 0.80 0.80 0.80 -1.20 -1.20
67 0.80 0.80 0.80 -1.20 -1.20
68 0.80 0.80 0.80 -1.20 -1.20
69 0.80 0.80 0.80 -1.20 -1.20
70 0.80 0.80 0.80 -1.20 -1.20
71 0.80 0.80 0.80 -1.20 -1.20
72 0.80 0.80 0.80 -1.20 -1.20
73 0.80 0.80 0.80 -1.20 -1.20
74 0.80 0.80 0.80 -1.20 -1.20
75 0.80 0.80 0.80 -1.20 -1.20
Freeze Home
fficients Cpe for monopitch roofs of buildings
Zone
Ø = 90° Ø = 180°
B C D A B C
-1.70 -0.60 -0.50 -2.30 -1.20 -0.80
-1.69 -0.62 -0.52 -2.33 -1.18 -0.81
-1.68 -0.64 -0.54 -2.36 -1.16 -0.82
-1.67 -0.66 -0.56 -2.39 -1.14 -0.83
-1.66 -0.68 -0.58 -2.42 -1.12 -0.84
-1.65 -0.70 -0.60 -2.45 -1.10 -0.85
-1.64 -0.72 -0.62 -2.48 -1.08 -0.86
-1.63 -0.74 -0.64 -2.51 -1.06 -0.87
-1.62 -0.76 -0.66 -2.54 -1.04 -0.88
-1.61 -0.78 -0.68 -2.57 -1.02 -0.89
-1.60 -0.80 -0.70 -2.60 -1.00 -0.90
-1.57 -0.81 -0.71 -2.58 -1.01 -0.89
-1.55 -0.83 -0.71 -2.56 -1.03 -0.89
-1.52 -0.84 -0.72 -2.54 -1.04 -0.88
-1.49 -0.85 -0.73 -2.52 -1.05 -0.87
-1.47 -0.87 -0.73 -2.50 -1.07 -0.87
-1.44 -0.88 -0.74 -2.48 -1.08 -0.86
-1.41 -0.89 -0.75 -2.46 -1.09 -0.85
-1.39 -0.91 -0.75 -2.44 -1.11 -0.85
-1.36 -0.92 -0.76 -2.42 -1.12 -0.84
-1.33 -0.93 -0.77 -2.40 -1.13 -0.83
-1.31 -0.95 -0.77 -2.38 -1.15 -0.83
-1.28 -0.96 -0.78 -2.36 -1.16 -0.82
-1.25 -0.97 -0.79 -2.34 -1.17 -0.81
-1.23 -0.99 -0.79 -2.32 -1.19 -0.81
-1.20 -1.00 -0.80 -2.30 -1.20 -0.80
-1.20 -1.00 -0.81 -2.23 -1.19 -0.80
-1.20 -1.00 -0.81 -2.17 -1.17 -0.80
-1.20 -1.00 -0.82 -2.10 -1.16 -0.80
-1.20 -1.00 -0.83 -2.03 -1.15 -0.80
-1.20 -1.00 -0.83 -1.97 -1.13 -0.80
-1.20 -1.00 -0.84 -1.90 -1.12 -0.80
-1.20 -1.00 -0.85 -1.83 -1.11 -0.80
-1.20 -1.00 -0.85 -1.77 -1.09 -0.80
-1.20 -1.00 -0.86 -1.70 -1.08 -0.80
-1.20 -1.00 -0.87 -1.63 -1.07 -0.80
-1.20 -1.00 -0.87 -1.57 -1.05 -0.80
-1.20 -1.00 -0.88 -1.50 -1.04 -0.80
-1.20 -1.00 -0.89 -1.43 -1.03 -0.80
-1.20 -1.00 -0.89 -1.37 -1.01 -0.80
-1.20 -1.00 -0.90 -1.30 -1.00 -0.80
-1.20 -0.96 -0.87 -1.28 -0.98 -0.79
-1.20 -0.92 -0.83 -1.26 -0.96 -0.79
-1.20 -0.88 -0.80 -1.24 -0.94 -0.78
-1.20 -0.84 -0.77 -1.22 -0.92 -0.77
-1.20 -0.80 -0.73 -1.20 -0.90 -0.77
-1.20 -0.76 -0.70 -1.18 -0.88 -0.76
-1.20 -0.72 -0.67 -1.16 -0.86 -0.75
-1.20 -0.68 -0.63 -1.14 -0.84 -0.75
-1.20 -0.64 -0.60 -1.12 -0.82 -0.74
-1.20 -0.60 -0.57 -1.10 -0.80 -0.73
-1.20 -0.56 -0.53 -1.08 -0.78 -0.73
-1.20 -0.52 -0.50 -1.06 -0.76 -0.72
-1.20 -0.48 -0.47 -1.04 -0.74 -0.71
-1.20 -0.44 -0.43 -1.02 -0.72 -0.71
-1.20 -0.40 0.40 -0.40 0.40 -1.00 -0.70 -0.70
-1.20 -0.40 0.41 -0.39 0.40 -1.01 -0.70 -0.70
-1.20 -0.40 0.41 -0.37 0.40 -1.01 -0.70 -0.70
-1.20 -0.40 0.42 -0.36 0.40 -1.02 -0.70 -0.70
-1.20 -0.40 0.43 -0.35 0.40 -1.03 -0.70 -0.70
-1.20 -0.40 0.43 -0.33 0.40 -1.03 -0.70 -0.70
-1.20 -0.40 0.44 -0.32 0.40 -1.04 -0.70 -0.70
-1.20 -0.40 0.45 -0.31 0.40 -1.05 -0.70 -0.70
-1.20 -0.40 0.45 -0.29 0.40 -1.05 -0.70 -0.70
-1.20 -0.40 0.46 -0.28 0.40 -1.06 -0.70 -0.70
-1.20 -0.40 0.47 -0.27 0.40 -1.07 -0.70 -0.70
-1.20 -0.40 0.47 -0.25 0.40 -1.07 -0.70 -0.70
-1.20 -0.40 0.48 -0.24 0.40 -1.08 -0.70 -0.70
-1.20 -0.40 0.49 -0.23 0.40 -1.09 -0.70 -0.70
-1.20 -0.40 0.49 -0.21 0.40 -1.09 -0.70 -0.70
-1.20 -0.40 0.50 -0.20 0.40 -1.10 -0.70 -0.70
Enter a Freeze
-45
Table 11 External pressure coefficients Cpe for hipped roofs of buildings
Zone
Pitch
Ø = 0° and Ø = 90°
angle a
A B C E F G
-45 -1.30 -0.60 -0.80 -0.70 -0.70 -0.70
-44 -1.37 -0.61 -0.80 -0.70 -0.70 -0.70
-43 -1.43 -0.63 -0.80 -0.70 -0.70 -0.70
-42 -1.50 -0.64 -0.80 -0.70 -0.70 -0.70
-41 -1.57 -0.65 -0.80 -0.70 -0.70 -0.70
-40 -1.63 -0.67 -0.80 -0.70 -0.70 -0.70
-39 -1.70 -0.68 -0.80 -0.70 -0.70 -0.70
-38 -1.77 -0.69 -0.80 -0.70 -0.70 -0.70
-37 -1.83 -0.71 -0.80 -0.70 -0.70 -0.70
-36 -1.90 -0.72 -0.80 -0.70 -0.70 -0.70
-35 -1.97 -0.73 -0.80 -0.70 -0.70 -0.70
-34 -2.03 -0.75 -0.80 -0.70 -0.70 -0.70
-33 -2.10 -0.76 -0.80 -0.70 -0.70 -0.70
-32 -2.17 -0.77 -0.80 -0.70 -0.70 -0.70
-31 -2.23 -0.79 -0.80 -0.70 -0.70 -0.70
-30 -2.30 -0.80 -0.80 -0.70 -0.70 -0.70
-29 -2.32 -0.81 -0.81 -0.69 -0.69 -0.69
-28 -2.34 -0.83 -0.81 -0.67 -0.67 -0.67
-27 -2.36 -0.84 -0.82 -0.66 -0.66 -0.66
-26 -2.38 -0.85 -0.83 -0.65 -0.65 -0.65
-25 -2.40 -0.87 -0.83 -0.63 -0.63 -0.63
-24 -2.42 -0.88 -0.84 -0.62 -0.62 -0.62
-23 -2.44 -0.89 -0.85 -0.61 -0.61 -0.61
-22 -2.46 -0.91 -0.85 -0.59 -0.59 -0.59
-21 -2.48 -0.92 -0.86 -0.58 -0.58 -0.58
-20 -2.50 -0.93 -0.87 -0.57 -0.57 -0.57
-19 -2.52 -0.95 -0.87 -0.55 -0.55 -0.55
-18 -2.54 -0.96 -0.88 -0.54 -0.54 -0.54
-17 -2.56 -0.97 -0.89 -0.53 -0.53 -0.53
-16 -2.58 -0.99 -0.89 -0.51 -0.51 -0.51
-15 -2.60 -1.00 -0.90 -0.50 -0.50 -0.50
-14 -2.57 -1.02 -0.89 -0.48 -0.48 -0.48
-13 -2.54 -1.04 -0.88 -0.46 -0.46 -0.46
-12 -2.51 -1.06 -0.87 -0.44 -0.44 -0.44
-11 -2.48 -1.08 -0.86 -0.42 -0.42 -0.42
-10 -2.45 -1.10 -0.85 -0.40 -0.40 -0.40
-9 -2.42 -1.12 -0.84 -0.38 -0.38 -0.38
-8 -2.39 -1.14 -0.83 -0.36 -0.36 -0.36
-7 -2.36 -1.16 -0.82 -0.34 -0.34 -0.34
-6 -2.33 -1.18 -0.81 -0.32 -0.32 -0.32
-5 -2.30 -1.20 -0.80 -0.30 -0.30 -0.30
5 -1.80 -1.20 -0.60 -0.60 -0.60 -0.30
6 -1.75 -1.16 -0.57 -0.64 -0.66 -0.32
7 -1.70 -1.12 -0.54 -0.68 -0.72 -0.34
8 -1.65 -1.08 -0.51 -0.72 -0.78 -0.36
9 -1.60 -1.04 -0.48 -0.76 -0.84 -0.38
10 -1.55 -1.00 -0.45 -0.80 -0.90 -0.40
11 -1.50 -0.96 -0.42 -0.84 -0.96 -0.42
12 -1.45 -0.92 -0.39 -0.88 -1.02 -0.44
13 -1.40 -0.88 -0.36 -0.92 -1.08 -0.46
14 -1.35 -0.84 -0.33 -0.96 -1.14 -0.48
15 -1.30 0.20 -0.80 0.20 -0.30 0.20 -1.00 -1.20 -0.50
16 -1.29 0.24 -0.78 0.22 -0.29 0.21 -0.98 -1.15 -0.49
17 -1.27 0.28 -0.76 0.24 -0.29 0.23 -0.96 -1.11 -0.49
18 -1.26 0.32 -0.74 0.26 -0.28 0.24 -0.94 -1.06 -0.48
19 -1.25 0.36 -0.72 0.28 -0.27 0.25 -0.92 -1.01 -0.47
20 -1.23 0.40 -0.70 0.30 -0.27 0.27 -0.90 -0.97 -0.47
21 -1.22 0.44 -0.68 0.32 -0.26 0.28 -0.88 -0.92 -0.46
22 -1.21 0.48 -0.66 0.34 -0.25 0.29 -0.86 -0.87 -0.45
23 -1.19 0.52 -0.64 0.36 -0.25 0.31 -0.84 -0.83 -0.45
24 -1.18 0.56 -0.62 0.38 -0.24 0.32 -0.82 -0.78 -0.44
25 -1.17 0.60 -0.60 0.40 -0.23 0.33 -0.80 -0.73 -0.43
26 -1.15 0.64 -0.58 0.42 -0.23 0.35 -0.78 -0.69 -0.43
27 -1.14 0.68 -0.56 0.44 -0.22 0.36 -0.76 -0.64 -0.42
28 -1.13 0.72 -0.54 0.46 -0.21 0.37 -0.74 -0.59 -0.41
29 -1.11 0.76 -0.52 0.48 -0.21 0.39 -0.72 -0.55 -0.41
30 -1.10 0.80 -0.50 0.50 -0.20 0.40 -0.70 -0.50 -0.40
31 -1.10 0.80 -0.49 0.51 0.42 -0.69 -0.49 -0.39
32 -1.10 0.80 -0.47 0.51 0.44 -0.69 -0.47 -0.39
33 -1.10 0.80 -0.46 0.52 0.46 -0.68 -0.46 -0.38
34 -1.10 0.80 -0.45 0.53 0.48 -0.67 -0.45 -0.37
35 -1.10 0.80 -0.43 0.53 0.50 -0.67 -0.43 -0.37
36 -1.10 0.80 -0.42 0.54 0.52 -0.66 -0.42 -0.36
37 -1.10 0.80 -0.41 0.55 0.54 -0.65 -0.41 -0.35
38 -1.10 0.80 -0.39 0.55 0.56 -0.65 -0.39 -0.35
39 -1.10 0.80 -0.38 0.56 0.58 -0.64 -0.38 -0.34
40 -1.10 0.80 -0.37 0.57 0.60 -0.63 -0.37 -0.33
41 -1.10 0.80 -0.35 0.57 0.62 -0.63 -0.35 -0.33
42 -1.10 0.80 -0.34 0.58 0.64 -0.62 -0.34 -0.32
43 -1.10 0.80 -0.33 0.59 0.66 -0.61 -0.33 -0.31
44 -1.10 0.80 -0.31 0.59 0.68 -0.61 -0.31 -0.31
45 -1.10 0.80 -0.30 0.60 0.70 -0.60 -0.30 -0.30
46 0.80 0.61 0.71 -0.60 -0.30 -0.30
47 0.80 0.63 0.71 -0.60 -0.30 -0.30
48 0.80 0.64 0.72 -0.60 -0.30 -0.30
49 0.80 0.65 0.73 -0.60 -0.30 -0.30
50 0.80 0.67 0.73 -0.60 -0.30 -0.30
51 0.80 0.68 0.74 -0.60 -0.30 -0.30
52 0.80 0.69 0.75 -0.60 -0.30 -0.30
53 0.80 0.71 0.75 -0.60 -0.30 -0.30
54 0.80 0.72 0.76 -0.60 -0.30 -0.30
55 0.80 0.73 0.77 -0.60 -0.30 -0.30
56 0.80 0.75 0.77 -0.60 -0.30 -0.30
57 0.80 0.76 0.78 -0.60 -0.30 -0.30
58 0.80 0.77 0.79 -0.60 -0.30 -0.30
59 0.80 0.79 0.79 -0.60 -0.30 -0.30
60 0.80 0.80 0.80 -0.60 -0.30 -0.30
61 0.80 0.80 0.80 -0.60 -0.30 -0.30
62 0.80 0.80 0.80 -0.60 -0.30 -0.30
63 0.80 0.80 0.80 -0.60 -0.30 -0.30
64 0.80 0.80 0.80 -0.60 -0.30 -0.30
65 0.80 0.80 0.80 -0.60 -0.30 -0.30
66 0.80 0.80 0.80 -0.60 -0.30 -0.30
67 0.80 0.80 0.80 -0.60 -0.30 -0.30
68 0.80 0.80 0.80 -0.60 -0.30 -0.30
69 0.80 0.80 0.80 -0.60 -0.30 -0.30
70 0.80 0.80 0.80 -0.60 -0.30 -0.30
71 0.80 0.80 0.80 -0.60 -0.30 -0.30
72 0.80 0.80 0.80 -0.60 -0.30 -0.30
73 0.80 0.80 0.80 -0.60 -0.30 -0.30
74 0.80 0.80 0.80 -0.60 -0.30 -0.30
75 0.80 0.80 0.80 -0.60 -0.30 -0.30
Freeze Home
s of buildings
H I J
-0.80 -0.80 -0.20
-0.80 -0.80 -0.20
-0.80 -0.80 -0.20
-0.80 -0.80 -0.20
-0.80 -0.80 -0.20
-0.80 -0.80 -0.20
-0.80 -0.80 -0.20
-0.80 -0.80 -0.20
-0.80 -0.80 -0.20
-0.80 -0.80 -0.20
-0.80 -0.80 -0.20
-0.80 -0.80 -0.20
-0.80 -0.80 -0.20
-0.80 -0.80 -0.20
-0.80 -0.80 -0.20
-0.80 -0.80 -0.20
-0.79 -0.79 -0.21
-0.77 -0.77 -0.21
-0.76 -0.76 -0.22
-0.75 -0.75 -0.23
-0.73 -0.73 -0.23
-0.72 -0.72 -0.24
-0.71 -0.71 -0.25
-0.69 -0.69 -0.25
-0.68 -0.68 -0.26
-0.67 -0.67 -0.27
-0.65 -0.65 -0.27
-0.64 -0.64 -0.28
-0.63 -0.63 -0.29
-0.61 -0.61 -0.29
-0.60 -0.60 -0.30
-0.60 -0.60 -0.31
-0.60 -0.60 -0.32
-0.60 -0.60 -0.33
-0.60 -0.60 -0.34
-0.60 -0.60 -0.35
-0.60 -0.60 -0.36
-0.60 -0.60 -0.37
-0.60 -0.60 -0.38
-0.60 -0.60 -0.39
-0.60 -0.60 -0.40
-1.20 -0.60 -0.40
-1.22 -0.60 -0.39
-1.24 -0.60 -0.38
-1.26 -0.60 -0.37
-1.28 -0.60 -0.36
-1.30 -0.60 -0.35
-1.32 -0.60 -0.34
-1.34 -0.60 -0.33
-1.36 -0.60 -0.32
-1.38 -0.60 -0.31
-1.40 -0.60 -0.30
-1.40 -0.61 -0.29
-1.40 -0.63 -0.29
-1.40 -0.64 -0.28
-1.40 -0.65 -0.27
-1.40 -0.67 -0.27
-1.40 -0.68 -0.26
-1.40 -0.69 -0.25
-1.40 -0.71 -0.25
-1.40 -0.72 -0.24
-1.40 -0.73 -0.23
-1.40 -0.75 -0.23
-1.40 -0.76 -0.22
-1.40 -0.77 -0.21
-1.40 -0.79 -0.21
-1.40 -0.80 -0.20
-1.39 -0.80 -0.20
-1.39 -0.80 -0.20
-1.38 -0.80 -0.20
-1.37 -0.80 -0.20
-1.37 -0.80 -0.20
-1.36 -0.80 -0.20
-1.35 -0.80 -0.20
-1.35 -0.80 -0.20
-1.34 -0.80 -0.20
-1.33 -0.80 -0.20
-1.33 -0.80 -0.20
-1.32 -0.80 -0.20
-1.31 -0.80 -0.20
-1.31 -0.80 -0.20
-1.30 -0.80 -0.20
-1.29 -0.77 -0.20
-1.29 -0.75 -0.20
-1.28 -0.72 -0.20
-1.27 -0.69 -0.20
-1.27 -0.67 -0.20
-1.26 -0.64 -0.20
-1.25 -0.61 -0.20
-1.25 -0.59 -0.20
-1.24 -0.56 -0.20
-1.23 -0.53 -0.20
-1.23 -0.51 -0.20
-1.22 -0.48 -0.20
-1.21 -0.45 -0.20
-1.21 -0.43 -0.20
-1.20 -0.40 -0.20
-1.20 -0.40 -0.20
-1.20 -0.40 -0.20
-1.20 -0.40 -0.20
-1.20 -0.40 -0.20
-1.20 -0.40 -0.20
-1.20 -0.40 -0.20
-1.20 -0.40 -0.20
-1.20 -0.40 -0.20
-1.20 -0.40 -0.20
-1.20 -0.40 -0.20
-1.20 -0.40 -0.20
-1.20 -0.40 -0.20
-1.20 -0.40 -0.20
-1.20 -0.40 -0.20
-1.20 -0.40 -0.20
Internal Pressures
Open-sided buildings 270º
0º
90º
180º
ORMAL TO:
SHORT FACE
load case (ii)
-0.16
-0.40
-0.38
-0.39
0.00
Table 1. Building-type factor, Kb
Check for significant topog
Type of building Kb
Welded steel unclad frames 8 Is site located on a hill, ridge,
cliff or escarpment ?
Bolted steel and reinforced concrete 4 Is upwind slope more than
unclad frames 1 in 20 (0.05) ?
Portal sheds and similar light structures 2 Is topographic feature: hill/ridge
with few internal walls or cliff/escarpment ?
Framed buildings with structural walls 1 Enter upwind slope:
around lifts and stairs only (e.g. office Enter upwind slope length (m):
buildings of open plan or with partitioning) Is site located within 0m of the
crest on the upwind slope ?
Framed buildings with structural walls 0.5 Is site located within 0m of the
around lifts and stairs with additional crest on downwind slope ?
masonry subdivision walls (e.g. apartment
buildings), buldings of masonry Topography not significan
construction and timber-framed housing
SETUP
This spreadsheet has been formatted using Arial, Arial Black, Symbol and Tahoma truetype fonts. The spreadsh
been optimised for a screen resolution of 1027x768 HiColor (16 bit) using large fonts.
Use the Zoom button on the toolbar to reduce or enlarge the display to suit your computer. Use the Save button
permanently store your new settings. Recommended zoom settings are as follows:
Screen resolution 800x600 with large fonts: 67%
Screen resolution 800x600 with small fonts: 85%
Screen resolution 1024x768 with large fonts 85%
Screen resolution 1024x768 with small fonts 105%
Company Details
Enter your company name and other details in the title block on the first sheet only. This is the 'Wind Speed I' sh
The details will be automatically copied to the other sheets. Company details cannot be entered in the other she
directly.
KEY INFORMATION
Microsoft Excel
This spreadsheet has been developed for use in Microsoft Excel 97 (v8.0) on the Microsoft Windows 95/98 ope
systems.
British Standard Specification (BSI)
This spreadsheet has been developed to comply with BS 6399 : Part 2 : 1997. (issued 15th July 1997)
Support
Support for this spreadsheet may be obtained by email from: info@structural-engineering.fsnet.co.uk
Additional Information
Refer to the accompanying README.TXT file for additional information.
SIMPLIFICATIONS
(Producing conservative results)
1) Reduction in lateral loads by dividing building into a number of parts ignored.
2) Maximum pressure coefficients used for Funnelling on side walls.
ASSUMPTIONS
1) Factor Sb - values for 0 km site in town same as values for site in country.
Interpolation valid between 0 km and 2 km site in town.
2) Size effect factor Ca - key for 0 km site in town same as site in country.
3) Scaling length for flat roofs with parapets is based on H being height of wall including parapet.
4) Size effect factors for side wall and roof frictional drag calculations based on diagonal
length of total side wall or roof area respectively.
USING WIND DESIGNERS WORKBOOK
The following colour key is a guide to using the full calculation page spreadsheets.
Message
SHORT CUTS
Entering Numerical Data
Expressions may be entered in place of numbers in cells requiring numerical input. e.g. To enter an expression
'No. of bars'.
Select the relevant cell. Enter the following: =4+8*3 - This expression evaluates to 28. You will see the expre
you double click on the cell or if you have the formula bar showing (go to View menu and click Formula Bar).
Home
buildings in accordance with BS
ook contains spreadsheets which
n be used as design aids, useful
ring.fsnet.co.uk
ref:
cl. 2.2.3.2
cl. 2.4.1.4
ref:
table 4
fig. 4
uding parapet. cl. 2.5.1.2
o calculate loads on four faces,
propriate sheet for the remaining
✘ Check Box
Option Button 1
● Option Button 2
Registration
Single user licence: £45
Company multiple-user licence: £40 per copy installed.
To order a copy, please send a cheque payable to 'C. Buczkowski' to the following address:
6 Stanhope Court, 53-55 Stanhope Road, North Finchley, LONDON N12 9DZ
You should include your email or postal address and a contact telephone number. Tel: 07939-
Also include the name you require the spreadsheet registered to (30 characters Tel/fax: 020-84
maximum). email: chris_bu
Disclaimer
THIS SOFTWARE IS PROVIDED FOR EVALUATION ONLY, ON AN "AS IS" BASIS. THE AUTHOR DISCLAIMS ALL WARR
TO THIS SOFTWARE, WHETHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE AUTHOR* SHALL NOT BE LIABLE FO
CONSEQUENTIAL, OR INCIDENTAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH SOFTWA
AUTHOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR CLAIMS. THE PERSON USING THE S
ALL RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE. ALTHOUGH EVERY EFFORT HAS BEEN M
THE ACCURACY OF THIS PROGRAM, USERS SHOULD VERIFY THE RESULTS FOR THEMSELVES.
REVISION HISTORY
Date Version Action
1/6/2000 1.0 Initial release.
3/20/2000 2.0 Major update.
Wind Speed I sheet - direction factor corrected. Wind Speed II sheet - direction
base altitude corrected, non-significant limits enhanced. Internal Pressures she
Buildings, Vertical Walls, Free-Standing Wall, Flat Roof & Duopitch Roof sheets
9/1/2002 2.1 type corrected. Size Effect Factor sheet amended. Basic Wind Speed sheet - Ir
added. Flat Roof & Duopitch Roof sheets - Cpi amended for "all walls imperme
sheet - print function corrected.
OOK
Home
ngineering.fsnet.co.uk
Tel: 07939-187549
Tel/fax: 020-8445 9438
email: chris_buck@biosys.net