Professional Documents
Culture Documents
A)Technical:-
1)Max.Test load-500Kgf
2)Max.Dist. b/w tension hooks-
3)Max.dist.b/w compression plate-900mm
4)Load accuracy -4% to 100% capacity
5) Position Accuracy -0.01mm
6) Power Supply -230V/50Hz +/- 10%
7) Dia of Plates – 200mm
A) Technical:-
1) Max.Test torque:- 500Kgmm
2) Max. Dist. b/w two torsion plates -100mm
3) Angle range -0-720 deg.
4) Spring/Coil dia -0-50mm
5) Power Supply- 220V/50HZ
6) Minimum read of Angle -0.1Deg.
SUB: CODIFICATION/PROCUREMENTS
You are requested to give clarification on following points before codification of new
items can be done.
1. How the necessary has arisen for procurement of new items now and how the work has
being carried till date without these items.
The work of Spring testing is being carried out with old machine.New machine is
required for capacity enhancement.
3. Please confirm after checking the available list in MCO that no other alternate material
available which can be utilized.
No alternate material is available.
5. Please furnish complete specification alongwith Pt.No.ISI No. Drg.No. size and acceptable
brand name if essential.
Torsion Compression Spring Testing Machine as per Annexure-A
6. Please attach budgetary quotation in support of cost of the items.
BQ No. 5842/GST/18-19 ,Dated:-06/07/18 of M/s Fino Scientific House, Kanpur
attached.
7. It is confirmed that no folio of the items or similar items are available at present in the
factory.
No folio of similar items are available in the factory.
GENERAL MANAGER