Professional Documents
Culture Documents
00 31-Mar-15
SAIC NUMBER DATE APPROVED QR NUMBER
SAUDI ARAMCO INSPECTION CHECKLIST
HDPE Liner Placement and Seaming Inspection SAIC-A-1016 30-Apr-17 Civil-
PROJECT TITLE WBS / BI / JO NUMBER CONTRACTOR / SUBCONTRACTOR
EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.
LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.
SCHEDULED INSPECTION DATE & TIME ACTUAL INSPECTION DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
SAUDI ARAMCO USE ONLY
SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
No.
A Liner Placement
The subgrade should be smooth and free of all rocks, sharp stones, Method
A1
sticks, roots, sharp objects, or debris of any kind Statement
Deployment of liner shall be started first from the floor section. Floor Method
A3
section HDPE panels of required sizes shall be cut & prepared ready. Statement
Liner placement shall not be done during any precipitation, in the Method
A6
presence of excessive moisture (e.g., fog, rain, dew). Statement
B Seaming Inspection
Before making field joints, all wrinkles shall be removed from the Method
B2
surfaces to be joined. Statement
Method
B3 Joining surfaces shall be clean and dry.
Statement
Cleaning solvents may not be used unless the product is approved Method
B4
by the liner manufacturer. Statement
Field pints shall be lapped between 100 and 150 mm or as per Method
B4
manufacturer recommendation. Statement
Wherever feasible, joining of surfaces shall use a wedge weld, with a Method
B5
void for air pressure testing and remaining by extrusion weld. Statement
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
No.
Method
C1 Patching - Used to repair large holes, tears and sample cut locations.
Statement
Method
C6 Extrude overlap runs along the length of fusion welded seams.
Statement
Removal of suspected seam and replace with a strip of new material Method
C7
seamed into place. Statement
REMARKS:
REFERENCE DOCUMENTS:
1- SAES-A-104 -- Wastewater Treatment, Reuse and Disposal, 28 December 2011