You are on page 1of 1

Job Safety Analysis (JSA)

Job Type: Vehicle Maintenance Date: __________________

Job Steps Hazards Controls


Damaged Tools can cause improper Inspect all the equipments/tools either safe for use or not
maintenance
Preparation for Maintenance Improper person can cause improper Assign proper and well trained person for required job
Maintenance
Work Place should be clean
Slip, trip, fall can occur Use Proper PPEs (Cover all, Gloves, Safety shoes)
Use proper oil collectors/ Trays
Waste oil/ Grease can spill out on
ground Use plastic sheets
Performing Maintenance
Use of improper parts can cause Choose and inspect all the spare parts need to install.
vehicle failure during operation

Installed parts/maintenance is not Quality inspector/Foreman should inspect the job done
Job Completion done properly Perform test drive
Waste material remain on ground can Clean the workplace after the job completion.
cause environmental damage

Prepared by: ________________ Approved by: ________________

You might also like