Professional Documents
Culture Documents
Firmware Information
Type Program No. VER. Remark
MAIN 2MC_2F00008005 008.005 FS-3540MFP New upgrade
MAIN 2MD_2F00008005 008.005 FS-3640MFP New upgrade
MMI 2MC_7000008005 008.005 New upgrade
ENGINE 2MC_1000004002 004.002
SCANNER 2MC_1200004001 004.001
Option Language 2MC_81BR001011 001.011 Brazilian Portuguese
FAX BOOT APL 2KX_5500008003 008.003 FS-3540MFP
1. Cross-site scripting (XSS) vulnerability has been recognized at Command Center. Due to this vulnerability,
any script might be executed on user's browser as an attack from a third party when a user accesses
Command Center. This has been corrected.
Previous Changes
FS-3540MFP Combined Firmware 03/14
Firmware Information
Type Program No. VER. Remark
MAIN 2MC_2F000E7.103 E07.103 FS-3540MFP New upgrade
MAIN 2MD_2F000E7103 E07.103 FS-3640MFP New upgrade
MMI 2MC_70000E7.101 E07.101 New upgrade
ENGINE 2MC_1000004002 004.002
SCANNER 2MC_1200004001 004.001
Option Language 2MC_81BR001011 001.011 Brazilian Portuguese
FAX BOOT APL 2KX_5500008003 008.003 FS-3540MFP
Details of changes
No. Changes/Modifications Details
1 New maintenance modes The following maintenance modes are made available to the field.
made available to the field U010: Set maintenance ID
U021: Memory initializing
FS- 3540MFP
Applicable models
FS- 3640MFP
MAIN E07.103
Version MAIN 007.005 MMI E07.101
U001/U019/U034
U065/U066/U067
U068/U070/U071 Previously added ------
U402/U403/U404
Previous Changes
FS-3540MFP Combined Firmware 06/13
3 Support for the Felica-Lite by The Felica-Lite (card) is now usable by SCM Card Reader.
SCM Card Reader (Card type readable by SCM: TYPE A (Mifare)/ TYPE B/ FeliCa/ FeliCa -Lite)
4 Preventing the Job ID from The printer job ID may change and several pages may not be printed. This has
changing been corrected.
5 Measure for barcode print When printing a certain PCL data, the barcode font error may occur. This has
failure been corrected.
6 Preventing the machine lockup When outputting from a certain application, the machine may lock up and fail to
when using a certain application print in the middle of data processing. This has been corrected.
7 Preventing font error when A font error may occur if the PCL5c comment data is included in the macro data.
registering certain macro data This has been corrected.
9 Measure 2 for a font pitch error The font pitch may become widened when printing a form created with the PCL
with certain data macro overlaying in the print data, or the font pitch may differ when printing the
data only without retrieving the macro data and when printing retrieving the macro
data. This has been corrected.
10 Measure for the IC Card The IC Card Reader (SCM) may not be recognized. This has been corrected.
Reader (SCM) recognition (It can be reset by disconnecting/reconnecting the USB port.)
failure
11 Preventing the Prescribe entry In rare cases, the character designation code in the PCL data may be aligned in
with a certain file the order of DEC [33], [82], [33] and (!R!), causing the Prescribe mode to be
entered unintentionally. When this occurs, no data will be printed afterward. This
has been corrected.
12 Performance enhancement The paper feed operation may stop every couple of pages if continuously printing
when printing a certain PDF a certain PDF, resulting in a longer output time. This has been improved.
13 Performance enhancement for When printing a PCL data from the user system (Print2000), the output speed is
the user system not up to the desired level. This has been corrected.
14 Measure for the image failure When printing a certain PS data, line may appear on the output image. This has
with a certain file been corrected.
15 Preventing a font failure when Partial font may not be correctly output when using a certain print data. This has
printing certain print data been corrected.
Firmware Information
Type Program No. VER. Remark
MAIN 2MC_2F00007005 007.005 FS-3540MFP New upgrade
MAIN 2MD_2F00007005 007.005 FS-3640MFP New upgrade
MMI 2MC_7000006010 006.010
ENGINE 2MC_1000004002 004.002
SCANNER 2MC_1200004001 004.001
Option Language 2MC_81BR001011 001.011 Brazilian Portuguese
FAX BOOT APL 2KX_5500008003 008.003 FS-3540MFP
Previous Changes
FS-3540MFP Combined Firmware 09/12
Firmware Information
Check
Type Program No. Version Remarks
SUM
MAIN 2MC_2F00006010 - 006.010 FS-3540MFP New upgrade
MAIN 2MD_2F00006010 - 006.010 FS-3640MFP New upgrade
MMI 2MC_7000006010 - 006.010 New upgrade
ENGINE 2MC_1000004002 72B6 004.002
SCANNER 2MC_1200003001 - 003.001
Brazilian
Option Language 2MC_81BR001011 - 001.011 New upgrade
Portuguese)
FAX BOOT APL 2KX_5500008003 - 008.003 New upgrade
Details of Changes
8 Preventing the F000, F245 Due to ASIC network process issue, error may occur after unnecessary data is
and F248 errors written when the reception buffer size is small for the reception data size. The
reception buffer size has been expanded as a preventative measure.
(The error may trigger when
not printing.)
9 Measure for the SMTP When you log in with HyPAS and perform the SMTP transmission, user’s mail
Sender address error when address does not show as the Sender. This has been corrected.
logging in with HyPAS
10 Measure for the error with When closing the DMS Link, the screen would not close with the “Closing” message
KDA developed application on display. This has been corrected.
(DMS Link)
11 Preventing the 2101/1102 If umlaut characters are entered for user name and password for SMB transmission,
error during the SMB the 2101 or 1102 error may be detected. This has been corrected.
transmission
12 Preventing the F349 error The F349 error may be detected at the USB Card Reader (KCE3) user. This has
when using the USB Card been corrected.
Reader (KCE3
13 Measure for the F349 error When using the Equitrac, if you log out in the middle of a copy job of large quantities,
when using the Equitrac the F349 error may trigger. This has been corrected.
14 Measure for report output issue The report such as status page, etc. is printed on the paper from the default cassette
(This issue is limited to the instead of Letter/A4 size. This has been corrected so it is output on the letter/A4
size.
overseas spec. color models
only.)
15 Measure for the KPDL error When printing a certain KPDL data (PS2), the KPDL error may trigger. This has
been corrected.
16 Measure for the error with a When retrieving a certain macro data, it may lockup while “Processing” message on
certain macro data display. This has been corrected.
17 Preventing the PDF direct KPDL error occurs when direct-printing a certain PDF file. This has been corrected.
print error (Error Name: /syntaxerror)
18 Preventing the F248 error ------------------
when printing a certain data
19 Measure for the print error When printing from AS-400, incorrect character may be printed (replaced by other
when printing from AS-400 character). This has been corrected.
20 Measure for the print error Some of the characters may be printed in small size when printing a certain file. This
when using a certain file has been corrected.
21 Preventing the color mode When logging in using the coin vender after setting the color mode with HyPAS
setting from failing to return application and then logging out, the setting may fail to reset. This has been
to the function default setting corrected.
22 Measure for the PDF direct When a certain PDF file is direct-printed, the font may not be printed correctly. This
printing failure has been corrected.
23 Measure for the PCL data When printing a certain PCL data with the user system, the following output errors
output error when printed may occur. This has been corrected.
with the user system ・ The font differs from the original.
・ Some characters are printed after rotating 90 degrees.
24 Measure for the reduction While in the reduction mode setting, a macro data may be output in the original size.
failure of a macro form This has been corrected.
25 Measure for the PDF direct- When direct-printing a certain PDF file, font error may occur. This has been
printing error corrected.
26 Preventing the CF245 error When performing the scanner transmission (E-mail, PDF), the CF245 error may
during the DP scan trigger in the middle of the DP scanning operation. This has been corrected.
<DVD-ROM>
1 Support for Mexican Oficio Mexican Oficio size is supported.
size
2 Driver/Utility version upgrade KX Printer Driver (Generic) 5.1.1405e2
KX Printer Driver 5.3.1520
KX (XPS) Driver 1.2.2419
PCL Mini Driver (Generic) 4.1
PCL Mini Driver 1.1
KPDL Mini Driver (Generic) 8.1112 [12-15-2011]
KPDL Mini Driver 8.1205 [05-08-2012]
Novell NDPS 5.3.1520
KYOCERA Net Viewer 5.3.2728
KYOCERA Net Direct Print 2.4.2426
Network FAX Driver 3.8.2701
TWAIN Driver 2.0.1707
WIA Driver (Network) 2.0.1709
WIA Driver (USB) 1.4.4205
Quick Setup 2.0.7
File Management Utility 2.0.1410
MAC PPD 8.1205 [05-08-2012]
<Leaflet>
1 Support for Mexican Oficio Mexican Oficio size is supported.
size
2 Error correction in the Auto drum refresh
Operation Guide (Error) No: Auto drum refresh is not executed.
(Correct) Short: Auto drum refresh timing is shortened.
3 Correction in the Fax Fax job transmission/reception history count on the touch panel machine
operation guide/Quick guide
(Error) 100
(Correct) 50
4 Software descriptions in the KYOCERA Net Viewer = KMnet Viewer
operation guide differ from KYOCERA Net Direct Print = KM-NET for Direct Printing
the guide included in DVD
Previous Changes
FS-3540MFP Combined Firmware 04/12
Firmware Information
CHECK Current
Type Program No. Version Remark
SUM Version
MAIN 2MC_2F00004004 - 004.004 - FS-3540MFP
MAIN 2MD_2F00004004 - 004.004 - FS-3640MFP
MMI 2MC_7000005001 - 005.001 -
ENGINE 2MC_1000004002 72B6 004.002 003.002 New upgrade
SCANNER 2MC_1200003001 - 003.001 -
Portuguese
Option Language 2MC_81BR001008 - 001.008 -
(Brazil)
FAX BOOT APL 2KX_5500007001 - 007.001 -
Combined Firmware is posted as separate packages and must be loaded for the specific model
Details of Changes
No. Change Content
1 Connection accuracy Firmware is modified to improve the connection accuracy when using the ON hook
enhancement when using the key on the pulse line.
ON hook key on the pulse line
Firmware Information
CHECK Current
Program No. Version Remark
SUM Version
MAIN 2MC_2F00004004 - 004.004 - FS-3540MFP
MAIN 2MD_2F00004004 - 004.004 - FS-3640MFP
MMI 2MC_7000005001 - 005.001 004.008 New upgrade
ENGINE 2MC_1000003002 - 003.002 -
SCANNER 2MC_1200003001 - 003.001 -
Option Portuguese
2MC_81BR001008 - 001.008 -
Language (Brazil)
FAX BOOT APL 2KX_5500007001 - 007.001 -
Combined Firmware is posted as separate packages and must be loaded for the specific model
Previous Changes
Details of Changes
No. Change/Modification Content
(1) The MP tray paper size and media type can be changed from the paper
selection on copy screen.
Operability enhancement for
(2) The MP tray paper size and media type can be changed when paper empty
1 selecting the MP tray paper size
condition occurs.
and media type
[See the following pages for details.]
Correction to the message in
2 “Addressees” is corrected to “Number of addressees”.
Brazilian Portuguese
Firmware Information
Check
Program No. Version Remark
Sum
MAIN 2MC_2F00004004 - 004.004 FS-3540MFP New update
New update
MAIN 2MD_2F00004004 - 004.004 FS-3640MFP
New update
MMI 2MC_7000004008 - 004.008
ENGINE 2MC_1000003002 - 003.002
SCANNER 2MC_1200003001 - 003.001
2MC_81BR00100 Brazilian New update
Option Language BR - 001.008
8 Portuguese
FAX BOOT APL 2KX_5500007001 - 007.001
Combined Firmware is posted as separate packages and must be loaded for the specific model
Operability Enhancement for selecting the MP tray Paper Size and Media Type
[Before change]
It is required to change the default setting from the system menu when the MP tray paper size or media type
needs to be changed.
[After change]
You can select the MP tray paper size or media type when making a copy.
Previous Changes
FS-3540MFP Combined Firmware 11/11
Details of changes
No. Change/Modification Details
1 Measure to prevent the “toner The “Toner low” message may display immediately after the toner container is installed.
low” display immediately after As a preventative measure, the toner low detection method is changed so it will be
the toner container installation detected according to the level of remaining toner in the container.
Originally, the “Toner low” message displays based on the toner low count detected. If
the remaining toner level in the container is high, the count number before detecting the
toner low condition will be increased to stabilize the judgment on the toner low detection.
2 Change to the SC5100 error The SC5100 error detecting process is changed to the same as the existing machines.
detecting process
3 Change to the adjustment The waiting time before acquiring the black reference data is increased from 50msec to
waiting time 150msec.
* When the mode switching does not occur, unnecessary lamp on/off process is
eliminated.
Note:
The following change is implemented with the engine firmware upgrade. Please call user’s attention as
illustrated below.
“Once the change toner message displays, do not try to reinstall it. The same message will display.
Please replace with the new toner container. “
Firmware Information
Combined Firmware is posted as separate packages and must be loaded for the specific model
Previous Changes
FS-3540MFP Combined Firmware 08/11
Details of Changes
No. Change Details
1 POP/SMTP support SSL support for E-mail reception printing and transmission
Firmware Information
Combined Firmware is separate packages and must be loaded for the specific model
Firmware Information
Combined Firmware is separate packages and must be loaded for the specific model