Professional Documents
Culture Documents
OR
(b) A steel worm running at 240 rpm receives 1.5 kW from its shaft. The speed reduction is
10:1. Design the drive so as to have an efficiency of 80%. Also determine the cooling
area required, if the temperature rise is restricted to 45 0C. Take overall heat transfer CO3 - A
coefficient as 10W/m2 0C.
11. A six speed gear box is required to provide output speeds in the range of 125 to 400
(a) rpm with a step ratio 1.25 and transmit a power 5 kW at 710 rpm. Draw the speed
CO4 - A
diagram and kinematic diagram. Determine the number of teeth , module and face
width of all gears, and length of the gear box.
OR
(b) A nine speed gear box , used as head stock gear box of a turret lathe , Is to provide a CO4 - A
speed range of 180 rpm to 1800 rpm using standard step ratio. Draw the speed diagram
and kinematic arrangement showing number of all gears.
(B) Design a 12 speed gear box. The required speed range is 100 tp 355 rpm. Draw the ray
diagram, kinematic arrangement and find the number of teeth on each gear. Check for CO4 - A
the interference.