Professional Documents
Culture Documents
DAIC Lab
DAIC Lab
gain of -2 for an
applied input signal of Vi = 5sin2π1000t. Perform the frequency response analysis and find
out the corner frequency ωH.
Design a Howland current pump using OPAMP 741 powered from ±12V regulated supplies
to generate a dc current of 60 μA with an output compliance of 6V dc. Also verify the
dependency of output current on load by load variation.
Design an Instrumentation Amplifier whose gain can be varied over the range 1 V/V ≤ A ≤
102 V/V by means of a 100-kΩ potentiometer.
Design a Non inverting Schmitt Trigger circuit for which the VTC is specified in Fig.1 using
IC 741 with ±12V DC power supplies.