Professional Documents
Culture Documents
BUILDING DIMENSIONS
Length, L (m) = 35.25
Width, W (m) = 22.1
CORE LOCATIONS
x1 (m) = 2
y1 (m) = 2.5
x2 (m) = 5.25
y2 (m) = 18.2
x3 (m) = 25.34
y3 (m) = 3.75
x4 (m) = 29.85
y4 (m) = 17.2
√
CORE DIMENSIONS (mm)
Core 1 Core 2 Core 3 Core 4
overall, B & D 2400 3600 3600 1800 3600 1800 2400 3600
opening 1, a1 & b1 200 250 300 250 250 300 0
opening 2, a2 & b2 1300 250 250 850 300 1400
opening 3, a3 & b3 2500 250 250 2750
opening 1, c1 & d1 1900 900 3000 1550 600 1350 1000 3000
opening 2, c2 & d2 2150 1000 1900 1550 1000 3000
opening 3, c3 & d3 1900 900 600 1300
CORE PROPERTIES
X bar mm 1112.5 1800.0 1819.3 1200.0
Y bar mm 1800.0 1217.6 700.3 1800.0
Ixx m4 4.398 0.561 0.803 4.831
Iyy m 4
2.233 3.511 3.580 0.707
√
DISTRIBUTION OF LATERAL MOMENTS
Torsional eccentricities ex = 2583.2 mm
ey = -764.5 mm
Proportions of lateral M
Core 1 Core 2 Core 3 Core 4
NS M from stiffness 41.52% 5.30% 7.58% 45.60%
NS M from torsion 1.01% 0.98% 0.96% 0.97%
NS total 42.53% 6.28% 8.54% 46.57% 4
EW M from stiffness 22.26% 35.00% 35.69% 7.05%
EW M from torsion 2.47% 1.65% 2.51% 3.31%
EW total 24.73% 36.65% 38.19% 10.36%
300 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0
1200
3600
2400
1800
33250 0 35250
19000 11050 11050
-288.6 -257.2 -225.9 -257.2 -288.6 -319.9 -351.2 -382.6 -413.9 -445.2 -476.5
137.88 106.55 75.223 106.55 137.88 169.21 200.53 231.86 263.19 294.52 325.85
1440 1620 1800 1980 2160 2340 2520 2700 2880 3060 3240
2728 2697 2666 2697 2728 2760 2791 2822 2854 2885 2916
2253 2284 2315 2284 2253 2221 2190 2159 2127 2096 2065
4026 4012 4020 4036 4052 4068 4084 4099 4115 4131 4147
3336 3352 3346 3331 3317 3303 3288 3274 3259 3245 3231
960 1080 1200 1320 1440 1560 1680 1800 1920 2040 2160
-426.4 -412.3 -420 -435.9 -451.8 -467.7 -483.6 -499.4 -515.3 -531.2 -547.1
263.68 248.08 254.34 268.72 283.1 297.48 311.85 326.23 340.61 355 369.36
2150 250
2500 2500
0 0
0 0
3350 2750
250 250
0 0
0 0
4150 2250
5000 5000
5250 5250
18200 18200
28690 28090
4000 4000
29850 29850
17200 17200
2150 250
2500 2500
-507.9 -539.2 0
357.17 388.5
3420 3600 3600
-562.9 -578.8 0
383.74 398.12
National Annex values
EC2 Ref Function Value
Table 2.2 γc 1.5 concrete
Table 2.2 γs 1.15 steel
3.1.6 (1)P αcc 0.85 strength factor - flexure
9.6.2 (1) As,vmin 0.002 min vertical steel
9.6.2 (1) As,vmax 0.04 max vertical steel
9.6.3 (1) As,hmin 0.001 min horizontal steel
9.6.3 (1) As,hmin 25% min horizontal steel
EN 1990 γG,sup 1.35 dead load factor
EN 1990 γG,inf 1 dead load factor Traffic, 30 to 160kN
EN 1990 γQ 1.5 imposed load factor
EN 1990 ξ 0.925 Gk modification factor
TABLE A1.1 EN1990 ψ0 ψ1 ψ2
Crowds 0.7 0.7 0.6
Dwelling 0.7 0.5 0.3
Office 0.7 0.5 0.3
Roofs 0 0 0
Shopping 0.7 0.7 0.6
Snow 0.5 0.2 0
Storage 1 0.9 0.8
Traffic, 30 to 160kN 0.7 0.5 0.3
Traffic<=30kN 0.7 0.7 0.6
Wind 0.5 0.2 0
Disclaimer
All advice or information from the British Cement Association and/or The Concrete Centre is intended
for those who will evaluate the significance and limitations of its contents and take responsibility for its
use and application. No liability (including that for negligence) for any loss resulting from such advice
or information is accepted by the BCA, TCC or their subcontractors, suppliers or advisors. Users should
note that all TCC software and publications are subject to revision from time to time and should
therefore ensure that they are in possession of the latest version.
This spreadsheet should be used in compliance with the accompanying publication 'User Guide RC
Spreadsheets: v3' available from The Concrete Bookshop, www.concretebookshop.com, Tel +44 (0)700 4
607777 or +44 (0)1276 607140
Size (kB)
645
Size (kB)