Professional Documents
Culture Documents
Architecks Metal Systems Inc PDF
Architecks Metal Systems Inc PDF
DECKING It is used to support concrete of a Concrete Slab. It was developed to provide a structurally e cient product for
PURLINS
use in oor systems.
VERSAFENCE
It is designed to create a permanent formwork that replaced the conventional wood forms that are used in
Hanging Slabs.
Despite the fact that it is a structural component, its uniform quality can o er an attractive appearance,
especially with the use of properly speci ed shop and eld applied coatings.
Steel deck is also a component of many UL and ULC approved re rated assemblies.
Specifications
Base metal type : ASTM A466 cold-rolled
Thickness : 0.80 mm
1.00 mm
1.20 mm
1.60 mm
/
Local Coil – Zinc = 120 to 150 gms / m2
Length : Transportable
DECK ONE
t y I St Sb
t y x I St Sb
/
(mm.) (mm.) (mm.) (mm.mm) (mm3) (mm3)
I
span (m)
(mm.)
0.80 125 12.00 12.00 12.00 12.00 12.00 12.00 12.00 9.14
DECK TWO
/
DECK THREE
t W A I St Sb
(MM.)
100 19.20 19.20 15.95 12.70 9.73 7.48 6.35 4.31
0.80 125 19.20 19.20 19.20 17.69 13.57 10.45 8.88 6.05
1.00 125 19.20 19.20 19.20 19.20 16.48 12.78 10.90 7.54
1.20 125 19.20 19.20 19.20 19.20 19.20 15.95 13.67 9.57
DECK FOUR
/
Deck Properites
t W A I Sp Sn Rb oVn
Gauge
(mm.) (kg.m2 mm2/mm mm4/mm mm2/mm mm2/mm kN/m kN/m
Composite Properties
Slab
t OM A Vol W Sc Iave oM oV
Depth
mm. kN.m. m2/m. M2/m2 kN/m2 mm3/m mm4/m kN.m kN/m
mm.
1.00 100 15.58 18.11 11.1 7.3 4.99 4.18 3.51 2.49
/
125 21.59 19.2 15.5 10.19 7.01 5.87 4.94 3.53
DECK FIVE
/
SUPER DECK
/
/
/
/
/
Electrical Layout
Connection Details
/
Typical Sprandel End
Composite Construction
COMPOSITE CONSTRUCTION
All reinforced concrete are composite construction in the sense that they combine two dissimilar material in
any structural member. The term composite is usually applies to the combination of the concrete with
structural steel in the form of DN Steel Deck Panels. The structural steel, while capable of carry loads when
acting alone can develop much strength and sti ness if it acts integrally with the concrete.
DN Steel Decking, easily and quickly laid on a steel oor beams, serves as working atform to support
construction activities and to carry freshly poured concrete. This eliminates the need of temporary aseworks
and forms.
DN Steel Decking, easily and quickly laid on a steel oor beams, serves as working atform to support
construction activities and to carry freshly poured concrete. This eliminates the need of temporary aseworks
and forms.
/