Professional Documents
Culture Documents
Installation Manual
Features:
Switches ON the pump when the water in the overhead tank goes below the pre-decided minimum
level.
Switches OFF the pump when the water level in the overhead tank reaches the maximum level
therefore prevents overflow
No more Overflow or Dry run thus saving water electricity & manpower.
Technical Specification:
Applications:
Domestic
Bungalows
Multi-storied apartments
Hospitals
Factories
When the water level in the tank goes below the minimum level the motor gets on
automatically and the water in the tank level rises.
Suppose the water in the sump is reduced or no water means the unit switches off the
motor automatically. This process is repeated until the water reaches the Tank high
level. Once the water reached tank high level the motor switches off automatically.
If the switch is in MANUAL mode the motor starts instantly and keeps ON until
the switch position changes.
Connect cable float in the over head tank and the tank float in the tank pins.
Connect the phase and neutral input and the output as shown in the above figure.