Professional Documents
Culture Documents
Income statement
d. Statement of retained earning
1) Find the profit of Weng's water refilling 8) Closing entries are made:
business with revenue of ₱56,000,000 and a. so that financial statements can be
costs of ₱42,000,000. made
a. ₱14,000,000 b. in order to terminate the business as an
b. ₱140,000 operating entity
c. ₱1,400,000 c. in order to transfer net income/loss and
d. ₱14,000 owner's drawings to the owner's capital
account
2) Norma's food stall has costs of ₱2,900.
d. so that all assets, liabilities, and owner's
Her total food sales are ₱11,600. What
capital accounts will have zero balances
percent of her food sales do the food costs
when the next accounting period starts
represent?
a. 20% 9) Suppliers who allow business to receive
b. 25% goods and services before paying for them
c. 27% are known as:
d. 30% a. Finance companies
b. Leasing companies
3) Marvin needs 250 cookies for a buffet.
c. Trade companies
He will make oatmeal raisin, macaroons,
d. Trade debtors
and chocolate chunk cookies. He wants
25% of the cookies to be oatmeal raisin 10) Which of the following is an example of
and 15% of the cookies to be macaroons. external finance?
How many chocolate chunk cookies must a. Disposal by a business of surplus assets
Marvin bake? b. Bank loan
a. 150 c. Day to day cash from sales to customers
b. 125 d. Money loaned from trade suppliers
c. 140 through extended credit
d. 100 11) A shareholder sells his shares for more
4) If a shirt is marked down 25%, what will than he paid for them. This is known as:
the purchase price be? a. Capital gain
a. ₱25 b. Profit on disposal
b. 75% of its original price c. God deal
c. 50% off d. Capital allowance
d. ₱75 12) The point at which the level of sales of
5) A customer places a special order a business exactly equals its costs is
through 480 Furniture Store. The list price known as the:
in the manufacturer's catalog is ₱1,600. a. Break-even point
480 Furniture receives a 35% trade b. Insolvency point
discount. What is the net price for the c. Start-up stage
furniture order? d. Profit point
a. ₱560 13) Working capital is:
b. ₱1,535 a. Current Assets-Current Liabilities
c. ₱1,565 b. Notes Payable
d. ₱1,040 c. Current Liabilities
6) Ron's Manufacturing offers discounts on d. Accounts Payable
most of its products. What is the trade 14) Which of the following does not appear
discount rate on an item with a list price of in a Balance Sheet?
₱16.79 and a net price of ?₱2.42? a. Cash
a. 22% b. Equipment
b. 26% c. Accounts Payable
c. 54% d. Depreciation Expense
d. 74% 15) Adjusting entries are used to:
7) What type of financial statement a. close the books
summarizes the information concerning the b. record accruals
cash inflows and outflows during a c. correct errors
particular period? d. all of the listed answers are correct
a. Balance sheet 16) Net Income or Profit results from:
b. Statement cash flows a. revenues exceeding expenses
b. assets exceeding liabilities
c. expenses exceeding revenues
d. liabilities exceeding assets
17) Assets are normally recorded at:
a. cost
b. appraised value
c. market value
d. management's estimated value
18) Which financial report measures results
for a period of time?
a. Balance Sheet
b. Income Statement
c. Trial Balance
d. All of the listed answers
19) Using the double entry system, every
business transaction _________.
a. affects two or more accounts
b. affects only asset accounts
c. affects only one account
d. affects only income statement
20) A debt incurred by buying goods or
services from a supplier on credit is called
_________.
a. property
b. accounts payable
c. an expense
d. accounts receivable
29) Which of these traits gets an 36) At what stage of marketing effort does
entrepreneur off of his feet and puts him an entrepreneur concentrate on targeting a
into action, turning daydream into reality? new market of buyers and taking market
a. Perseverance share from competitors by price cutting or
b. Ambition relaunching the product?
c. Creativity a. Introduction
d. Enthusiasm b. Growth
c. Maturity
30) Which entrepreneurial trait gives an
d. Decline
entrepreneur a positive outlook in life
which gives the energy to pursue his 37) Which of the following is NOT
endeavors? appropriate in running a small-scale
a. Perseverance business?
b. Ambition a. Keeping clear records
c. Creativity b. Verifying profit and loss
d. Enthusiasm c. Managing cash flow
d. Distribution channel
31) Which trait is an entrepreneur able to
withstand the troubles that come with a 38) Which marketing channel operates with
starting business? capital owned directly by the operators and
a. Perseverance their partners, or in some cases by
b. Ambition shareholders?
c. Creativity a. Cooperatives
d. Enthusiasm b. Independent, locally based private
enterprise
32) What is the general function of
c. Marketing boards and other state
marketing, involves the physical meeting
enterprises
point for buyers and sellers at the point of
d. Transnational companies
production or via some other means of
communication? 39) At which stage of a product life cycle
a. Specific functions must an entrepreneur decide whether he
b. Exchange functions wants to try to rejuvenate the product by
c. Physical functions investing in development and aggressive
d. Facilitating functions marketing or to quietly admit defeat and
exit the market?
33) Which type of marketing functions,
a. Introduction
enables the actual flow of commodities
b. Growth
through space and time from producer to
c. Maturity
consumer and their transformation to a
d. Decline
form desirable function to the consumers?
a. Specific functions 40) A marketing mix that can have both
b. Exchange functions tangible and intangible aspects and is the
c. Physical functions thing you offer to satisfy your customers'
d. Facilitating functions wants and needs is ________.
a. Product
b. Packaging
c. Price guide an entrepreneur in a business
d. Promotion venture?
41) Which is considered to be the best way a. Resume
to assess entrepreneurial projects or b. Portfolio
business ventures? c. Business plan
a. Environmental analysis d. Insurance plan
b. SWOT analysis
c. Competitor analysis
d. PEST analysis
42) An analysis that provides the details for
opportunities and threats of a business to
make better decisions regarding marketing
plan is termed ________.
a. Environmental analysis
b. SWOT analysis
c. Competitor analysis
d. PEST analysis
43) The acronym SWOT stands for:
a. Strengths-Weaknesses-Options-Testing
b. Strengths-Weaknesses-Opportunities-
Testing
c. Strengths-Weaknesses-Options-Threats
d. Strengths-Weaknesses-Opportunities-
Threats
44) Which question is asked at the first
stage in the marketing planning process of
an enterprise?
a. Where are we now?
b. Where are we heading?
c. Are we on course?
d. Where would we like to be?
45) Which of these stages is the final stage
in the marketing planning process flow
chart?
a. Control
b. Marketing planning mix
c. Setting marketing objectives
d. Setting the product price
46) An entrepreneur might select a target
market probably because the target market
________.
a. is attractive to the business and
matches its supply capabilities
b. is large and well-served with existing
products
c. is fully understood by the entrepreneur
d. has a proven track record for buying
product
47) A carefully thought structured formal
commercial report that is extraordinary
well documented and clearly written to
safeguard any wastage of further
investment project is called ________.
a. Portfolio
b. Business plan
c. Resume
d. Feasibility study
48) Which is considered as a
comprehensive and effective blueprint to
TLE (7) - Entrepreneurship
ANSWERS:
1. B
2. D
3. B
4. D
5. B
6. D
7. A
8. C
9. B
10. C
11. C
12. A
13. B
14. C
15. D
16. D
17. D
18. C
19. A
20. C
21. C
22. C
23. B
24. A
25. A
26. B
27. D
28. B
29. B
30. D
31. A
32. B
33. C
34. D
35. C
36. C
37. C
38. B
39. D
40. A
41. B
42. D
43. D
44. A
45. A
46. A
47. D
48. C
6) A diode is an electronic part that at all
times is expected to do one of the
following functions. Which one is it?
a. allow current to flow in both directions
b. multiply voltage
c. allow current to flow in one direction
only
d. not allow any current flow
7) There are various types of diodes. This
diode that acts as a regulator is the
________.
a. Silicon diode
b. Crystal diode
c. LED
d. Zener diode
8) You will find an electrode nearest the
white band on a rectifier. What is it?
a. Anode
b. Cathode
c. Gate
d. Main Terminal
9) When a diode is tested and the reading is
TLE (6) - Basic Electronics zero, it means the diode is
________.
a. Shorted
1) A schematic diagram shows the b. Open
components of an electronic circuit by c. Leaky
means of: d. Good
a. Symbol
10) If the transistor is an NPN type, the
b. Construction
base is ________.
c. Physical appearance
a. negative & positive
d. Linear appearance
b. negative
2) What is the best place for electronic c. positive
hand tools and equipment? d. common
a. Tool box
11) If the arrow of a transistor symbol is
b. Tool cabinet
pointing inward it tells us that the
c. Tool room
transistor is:
d. Tool bag
a. NPN
3) Imagine three resistors in parallel, with b. PNP
values of 22 ohms, 27 ohms, and 33 c. Bipolar
ohms. If a 12 V battery is connected across d. Injunction
this combination, what is the current
12) In the electronic symbol of a transistor,
drawn from the battery?
the electrode with an arrow is the:
a. 1.4 A
a. Emitter
b. 15 mA
b. Base
c. 150 mA
c. Collector
d. 1.5 A
d. Cathode
4) Which of the following is a non-polarized
13) The production of magnetic field by
electronic component?
current in a conductor is ________.
a. Transistor
a. Electromagnetism
b. Resistor
b. Ferromagnetism
c. Diode
c. Magnetism
d. Electrolytic capacitor
d. Diamagnetism
5) The voltage rating found in a capacitor is
14) The type of current whose amplitude
called ________.
drops to zero periodically and is
a. Peak-reverse voltage
produced in rectifier is known as ________.
b. Working voltage
a. Pulsating Direct Current
c. Blow-up voltage
b. Damped Alternating Current
d. Breakdown voltage
c. Varying Direct Current in accordance with demodulating signal?
d. Saw tooth wave a. FM
15) Printed on the dial of an AM radio is an b. PDM
RF band covering _________. c. AM
a. kHz 76 - 90 MHz d. PCM
b. 88 - 108 MHz 24) The actual flow of current is from
c. 16 Hz - 20 kHz ________.
d. 535 - 1,605 kHz a. negative to positive
16) An ordinary radio can be tuned to b. positive to negative
different stations. The electronic c. positive to positive
component responsible for this function is d. negative to negative
the: 25) The rate of doing work is called
a. Tuning capacitor ________.
b. Oscillator coil a. energy
c. IF transformer b. power
d. Detector diode c. voltage
17) The condition of a loud speaker is d. resistance
tested more accurately using one of the 26) MilliHenry is equal to ________.
ranges listed below: a. 10th Henry
a. R x 1K b. 100th Henry
b. R x 10 c. 1,000th Henry
c. R x 1 d. 1,000,000th Henry
d. R x 10K 27) An inductor opposes any change in
18) Working efficiently is a good work ________.
habit. Tinning the tip of a soldering iron a. voltage
refers to: b. current
a. Cleaning the tip with a sand paper c. frequency
b. Making the tip pointed d. modulation
c. Cutting the tip 28) A circuit having two or more current
d. Applying flux to the tip paths is a ________ connection.
19) The common cause of an erratic or a. parallel
distorted sound of a transistor radio is a b. series
defective? c. series-parallel
a. Amplifier d. cannot be determined
b. Volume control 29) Which is an electrical unit of measuring
c. Antenna a power?
d. Tuner a. Ohms
20) An appliance with 110 Volts AC Supply b. Ampere
is accidentally plugged to a 220 Volts AC c. Watt
outlet. What component is usually d. Volt
destroyed? 30) A category of a resistor which obey
a. Switch Ohm's Law is ________.
b. AC plug a. linear
c. Line fuse b. non-linear
d. Power transformer c. potentiometer
21) The word electron was derived from the d. resistance
Greek word "elektron", which means: 31) Which is an electronic device that is
a. to rub used to limit or oppose the flow of
b. to flow current in a circuit?
c. amber a. Capacitor
d. friction b. Resistor
22) The peak to peak voltage in a 117 V AC c. Diode
outlet is ________. d. Inductor
a. 620 V 32) An instrument that is used to measure
b. 165.5 V the amount of resistance in a circuit is
c. 331 V called ________.
d. 220 V a. DC voltmeter
23) Which is a type of modulation where b. ohmmeter
the amplitude of the carriers is changed
c. AC voltmeter a. 10K
d. ammeter b. 20K
33) Solder is a mixture of ________. c. 5K
a. tin lead d. cannot be determined
b. zinc and lead 43) The 2 pcs. of 3V batteries are
c. zinc and tin connected in series. The output voltage is
d. copper and lead ________.
34) The common used soldering lead is a. 3V
________. b. 6V
a. 40-60 c. 0V
b. 60-40 d. cannot be determined
c. 50-50 44) An electronic device that is used to
d. 50-40 limit or oppose the flow of current in a
35) A standard 220VAC has a frequency of circuit is called a ________.
________. a. capacitor
a. 45 Hz b. resistor
b. 30 Hz c. diode
c. 50 Hz d. inductor
d. 60 Hz 45) Which tool is needed in removing
36) A low frequency speaker is sometimes soldered components in the circuit board?
known as ________. a. Long nose pliers
a. tweeter b. Desoldering pump
b. squeaker c. Diagonal cutting pliers
c. woofer d. Wire stripper
d. howler 46) Which tool is used in joining or
37) The three leads of a common transistor soldering electronic components in the
are a/an: circuit
a. collector base emitter board?
b. emitter collector base a. Soldering iron
c. base collector case b. Electrical pliers
d. collector base emitter c. Desoldering pump
d. Long nose plier
38) Connecting lead from the negative to
the positive of a battery will produce 47) Which tool is used to hold or pick up
a/an ________. components in the circuit board?
a. high resistance circuit a. Mechanical pliers
b. low current path b. Long nose pliers
c. short circuit c. Electrical pliers
d. open circuit d. Wire stripper
39) What is the approximate characteristic 48) Which tool is used in turning slotted
voltage that develops across a red screws?
LED? a. Flat screw driver
a. 1.7 V b. Phillips screw driver
b. 0.6 V c. Electrical pliers
c. 3.4 V d. Wire stripper
d. 6 V 49) Which is a pocket-sized tool that
40) If two resistors are placed in series, the provides maximum safety when pulling
final resistance is ________. cartridge fuses and checking electrical
a. higher connections?
b. lower a. Fuse puller
c. the same b. Screw driver
d. cannot be determined c. Desoldering tool
d. Mini drill
41) A 100n capacitor in parallel with 10n
produces ________. 50) If a 10K resistor is placed across a 10 v
a. 90n supply, the current will be ________.
b. 110n a. 10 mA
c. 100n b. 0.001 mA
d. cannot be determined c. 1 mA
d. 65 mA
42) The 10k resistor in parallel with 10k
produces ________.
51) A disadvantage of LCD (liquid crystal c. Common base
display) is ________. d. Emitter follower
a. high current demands 61) Which rectifier circuit uses four diodes
b. slow reactance to input for its rectification?
c. environmental temperature sensitivity a. half-wave rectifier
d. persistence limitations b. full-wave rectifier
52) Which is TRUE of a series DC motor c. full-wave rectifier
with no load? d. split type rectifier
a. Tends to stop or not start 62) When a resistor is open, the resistance
b. Maybe damaged by excessive speed ________.
c. Has reverse direction a. increases
d. Becomes an AC generator b. gets zero
53) A fuse marked 250V, 650m can be used c. decreases
in circuits with an "open fuse" supply d. is infinite
voltage of ________. 63) A low voltage power supply converts
a. 125 Volts ________.
b. 500 Volts a. AC voltage output
c. 5,000 Volts b. Pulsating DC voltage
d. 250 Volts c. DC output voltage
54) To prevent transistor from getting hot, d. AC and DC voltage outputs
use ________. 64) When checking an open resistor using
a. silicon grease an ohmmeter the resistance reads
b. insulator ________.
c. heat sink a. zero level
d. exhaust fan b. high resistance but within the tolerance
55) To obtain a higher value of resistance, c. infinite
resistors are ________. d. low but not zero
a. reverse 65) Moving one plate of a capacitor further
b. parallel away from the other will ________.
c. forward a. decrease capacitance
d. series b. increase capacitance
56) Which fuse has its internal fusible wire c. decrease voltage rating
wrapped around an insulator? d. increase mutual transductunce
a. a slow-blow type fuse 66) In checking capacitor to see if it is
b. an inductive fuse shorted, open or leaky, you would use the
c. a capacitive fuse ________ ohmmeter range.
d. intended for high voltage fuse a. lowest
57) Which would be considered "basic b. highest
components of a power supply"? c. middle
a. zener, regulator, transformer d. upper
b. regulator, diode, AC power, load 67) A schematic diagram shows the
c. transformer, bridge, capacitor, load components of an electronic circuit by
d. filter, regulator, rectifier, transformer means of ________.
58) Which presents the rise and fall of a. a symbol
alternating current and voltages? b. a construction
a. Graph c. physical appearance
b. Sine wave d. linear appearance
c. Fluctuation 68) If there are only two resistors with the
d. Cycle same values in parallel circuit, which
59) When two capacitors are connected in formula may be used to find its total
parallel, the capacitance will resistance?
________. a. Rt = R/n
a. increase b. Rt = (R1xR2) / (R1+R2)
b. have the same value c. 1/Rt = 1/R1 + 1/R2 + ......1/Rn
c. decrease d. Rt = (R1+R2) / (R1xR2)
d. increase and decrease 69) Which hand tool is used solely for
60) Which circuit has the most gain? cutting metals?
a. Common emitter a. utility knife
b. Common collector b. saw
c. magnifying glass 79) Which type of lines is used to show
d. paint brush mechanical linkages between components
70) What is the reason why threads become or parts on schematic diagram?
stripped? a. Connecting lines
a. screws are over tightened b. Dashed lines
b. Screws are heated c. Medium lines
c. screws are molded d. Thin lines
d. screws are painted 80) What does VOM mean?
71) In what instrument is the ohmmeter a. AC Voltmeter
found? b. Ohmmeter
a. Ammeter c. DC Milliammeter
b. Tube tester d. Volt-Ohm-Milliammeter
c. Capacitor tester 81) Which tool is used to cut the insulation
d. VOM without cutting the wire?
72) From what part of the ohmmeter do you a. utility knife
derive resistance reading? b. hacksaw
a. Range multiplier c. side cutter
b. Reading scale d. wire stripper
c. Test probes 82) What does LED stands for?
d. Pointer a. Light emitting display
73) Which instrument serves as 3 b. Low energy display
measuring instruments in one? c. Light emitting diode
a. Audio generator d. Light emitting detector
b. Oscilloscope 83) Which picture or sketch shows the
c. Signal generator components of a circuit and how these
d. VOM components are connected together?
74) Which device produces simple a. Wiring diagram
waveforms? b. Block diagram
a. Audio amplifier c. Pictorial diagram
b. VOM d. Schematic diagram
c. Signal tracer 84) 3 pcs. of resistors in which the values
d. Signal generator are 10 ohm, 20 ohms, and 50 ohms. If the
75) What is the another name for 20 ohms is open, what will be the reading
connection diagram? in the ohmmeter?
a. Wiring diagram a. 60 ohms
b. Block diagram b. 0
c. Pictorial diagram c. infinite
d. Schematic diagram d. 80 ohms
76) Which equipment is used to discharge 85) Why does an AM receiver receive or
electrical charges produced by the pick-up signal despite the far distance
human body? from the transmitter compared to the FM
a. Audio generator receiver?
b. Signal generator a. The AM receiver picks up signal easily
c. ESD because of the transistor.
d. VOM b. The AM receiver picks up signal easily
because the signals transmitted by the AM
77) Which term refers to the set of rules or
transmitter is by means of line to sight.
practices to ensure no accident
c. The AM receiver picks up signal easily
prevention?
because the signals transmitted by the
a. Safety practices
AM transmitter is by means of line to
b. Rules and regulation
ground.
c. Policy order
d. The AM receiver picks up signal easily
d. Action plan
because the signals transmitted by the AM
78) What tools are NOT recommended to be transmitter is by means of line to televise.
used in electronics works?
86) Why is it needed to place antenna in
a. brand new tools
higher or an elevated area particularly in a
b. branded tools
mountainous place?
c. damaged tools
I. All signals transmitted by the transmitter
d. locally produced tools
station is by means of line to ground;
the higher antenna the more signal can be
received.
II. The antenna is placed in higher or
elevated area in order to capture the wind
direction.
III. Signals transmitted by the transmitter
station is by means of line of sight;
the higher antenna the more signal can be
received.
a. I only
b. III only
c. II only
d. I, II, III
87) A Service Electronics Technician
cleaned the terminal of the component
using sand paper or knife before it soldered
to the PCB. What is the main purpose of
that cleaning?
a. To attract more charges.
b. To remove the insulator so that soldering
can be made easily.
c. To attract electrons, protons, and
neutrons.
d. To maximize the desired voltages.
88) If the Service Electronics Technician
applied the so-called pre-tinning, how
should be the process be?
a. The Service Electronics Technician
applies a little amount of soldering lead
and soldering flux to the tip during pre-
heating of the soldering iron.
b. The Service Electronics Technician
cleans the soldering tip using files, sand
paper or a cutter.
c. The Service Electronics Technician
allows his soldering iron to heat atleast 40
minutes before he uses it and solders with
the terminal of the component.
d. The Service Electronics Technician
checks the temperature of the tip before
soldering is made.
47. B
48. A
49. A
50. B
51. B
52. B
53. A
54. C
55. D
56. D
57. B
58. B
59. A
TLE (6) - Basic Electronics 60. A
ANSWERS: 61. C
62. D
1. A
63. B
2. A
64. C
3. A
65. A
4. B
66. B
5. B
67. A
6. C
68. B
7. D
69. B
8. B
70. A
9. A
71. D
10. C
72. A
11. B
73. D
12. A
74. D
13. A
75. D
14. A
76. C
15. D
77. A
16. A
78. C
17. C
79. A
18. D
80. D
19. B
81. D
20. C
82. C
21. B
83. C
22. D
84. C
23. C
85. C
24. A
86. B
25. B
87. B
26. C
88. A
27. B
28. A
29. C
30. A
31. B
32. B
33. A
34. B
35. D
36. C
37. D
38. C
39. C
40. A
41. A
42. C
43. B
44. B
45. B
46. A
a. Sun dried
b. Kiln dried
c. Air dried
d. Natural dried
6) There are numerous kinds of saw. When
sawing along the grain of wood, you need a
________.
a. back saw
b. cross cut saw
c. rip saw
d. circular saw
7) In measuring cylindrical object, what is
the appropriate tool to be used?
a. ruler
b. caliper
c. pull-push rule
d. meter stick
8) Fastening materials are important in
woodworks. The most common of these
materials is ________.
a. dowel
b. bolts
c. screw
d. nails
9) A wood product made of three or more
veneer slice that are laid one upon the
other and bonded with glue or synthetic
TLE (5) - Carpentry and Masonry resin is ________.
a. Pressed wood
b. Plywood
1) The preparation of good quality lumber c. Particle board
includes several stages. When it is dried, d. Soft wood
the process involved is?
10) Which of the following tools is used in
a. seasoning
checking the squareness of the corners
b. staining
and flatness of a surface?
c. lumbering
a. Straightedge
d. logging
b. Steel square
2) The smallest division of the metric scale c. Sliding T-bevel
that you can find in the steel rule is d. Try square
________.
11) The strongest form of wood joint
a. decimeter
applicable for table legs is ________.
b. centimeter
a. miter
c. millimeter
b. mortise and tenon
d. meter
c. dado
3) What is the conversion equivalent of one d. butt and lap
inch to centimeters?
12) You are almost finished with your
a. 25.4
project. One of the procedure below is done
b. 2.54
before the application of finishing
c. 0.254
materials.
d. 0.0254
a. cutting
4) Find the total number of board feet of six b. spraying
pieces of lumber with a dimension of 2" x c. sanding
4" x 12'. d. varnishing
a. 8 bd. ft.
13) A surfaced lumber where four of its
b. 96 bd. ft.
sides are smooth or planed is called:
c. 48 bd. ft.
a. S3S
d. 480 bd. ft.
b. S2S
5) A seasoned lumber is ideal for carpentry c. Rough
works. Which among the following is best d. S4S
to use?
14) In carpentry, splicing or joining of wood a. Hard wood
using two side blocks is called: b. Soft wood
a. Lapping c. Dark wood
b. Scarfing d. Brown wood
c. Fishing 23) Which wood is obtained from deciduous
d. Jointing trees?
15) There is considerable number of wood a. Hard wood
joints. The simplest and easiest to make is b. Soft wood
________. c. Dark wood
a. Lap joint d. Brown wood
b. Dado joint 24) Which is a binding agent that reacts
c. Miter joint with water to form a hard stone-like
d. Butt joint substance?
16) In a wooden floor system, the major a. Glue
horizontal support member upon which the b. Cement
floor system is laid is the ________. c. Mortar
a. Floor joist d. Grout
b. Sill 25) Which term refers to inert materials
c. Header when bound together into a conglomerated
d. Girder mass from concrete?
17) A type of roof frame consisting series of a. Aggregates
triangles used to distribute loads and b. Gravel
stiffen the structure of the roof is ________. c. Cement
a. Girts d. Water
b. Rafter 26) A lumber that has been sawed, edged,
c. Truss and trimmed in which cutting marks are
d. Purlins visible is ________.
18) A triangular file is used to sharpen a a. rough
saw. What is the angle of the file set b. smooth
against the bevel of the tooth of a cross cut c. dressed
saw? d. worked
a. 30 degrees 27) Which lumber has been put through
b. 45 degrees planing machine which gives fine surface?
c. 90 degrees a. rough
d. 60 degrees b. smooth
19) What kind of wood finishing material is c. dressed
used when you want a solid color instead d. worked
of a wood pattern finish? 28) Which lumber that has been dresses
a. Opaque finishes and matched, ship lapped, or patterned?
b. Bleaches a. rough
c. Stains b. smooth
d. Lacquers c. dressed
20) A saw angle should be adjusted d. worked
depending on the kind of wood. What is the 29) Which is a plank of wood that has been
recommended angle for soft and thin roughly cut?
wood? a. Timber
a. 30-45 degrees b. Board
b. 60 degrees c. Lumber
c. 80 degrees d. Block
d. 20 degrees
30) Which lumber has been cut from logs
21) Which is considered to be the oldest radially to the growth rings and the fiber
and most commonly used building runs about parallel to the face?
material? a. Edge-grain
a. Cement b. Angle-grain
b. Wood c. Flat-grain
c. Steel d. Close-grain
d. Sand
31) Which lumber has been cut tangentially
22) A wood which is obtained from conifers to the growth rings and the fiber runs about
and are used for framing? 90 degrees to the face?
a. Edge-grain c. Bricks
b. Angle-grain d. CHB
c. Flat-grain 41) Which lumber has wood fibers that are
d. Close-grain packed closely together?
32) Which is the art of building with stone, a. Edge-grain
bricks, concrete blocks of other similar b. Angle-grain
materials? c. Flat-grain
a. Carpentry d. Close-grain
b. Concrete 42) Which lumber has wood fiber that do
c. Mortar not run parallel to the board?
d. Masonry a. Edge-grain
33) If you want to go upstairs, which part b. Cross-grain
do you hold on to? c. Flat-grain
a. Handrail d. Close-grain
b. Tread 43) A carpenter makes a picture frame.
c. Handle Which type of joint is appropriate?
d. Riser a. Dado joint
34) If you want to upstairs, which part do b. Tenon joint
you step on? c. Lap joint
a. Handrail d. Miter joint
b. Tread 44) A carpenter fixes shelves of a
c. Handle bookcase. Which type of joint is
d. Riser appropriate?
35) What makes the door swing when you a. Dado joint
close and open it? b. Mortise and Tenon joint
a. Door knob c. Lap joint
b. Door lock d. Miter joint
c. Door shutter 45) In which wood joint is the end of one
d. Door hinge member inserted to hole of the other
36) A carpenter wants to construct a stair, member?
what could be the standard height of the a. Dado joint
riser? b. Mortise and Tenon joint
a. 5-6 inches c. Lap joint
b. 6-8 inches d. Miter joint
c. 8-10 inches 46) Which wood joint describes the
d. 10-12 inches technique for joining two pieces by putting
37) In masonry works, it is necessary to one side over the other?
wear protective equipment, EXCEPT: a. Dado joint
a. mask b. Butt joint
b. goggles c. Lap joint
c. gloves d. Miter joint
d. ear muffs 47) Which wood joint describes the
38) In the construction site, what protects technique for joining two pieces by putting
the carpenter from falling objects? one end over the other?
a. Hat a. Dado joint
b. Belt and harness b. Butt joint
c. Helmet c. Lap joint
d. Shed d. Miter joint
39) In the construction site, what protects 48) A carpenter wants to make a dining
the carpenter from falling? table. Which joint is appropriate to become
a. Hat rigid and durable?
b. Belt and harness a. Miter joint
c. Helmet b. Mortise and Tenon joint
d. Shed c. Dado joint
40) These are compress baked clay that d. Butt joint
are processed into workable materials? 49) Which is the simplest type of wood
a. Stone joint?
b. Sand a. Dado joint
b. Butt joint
c. Lap joint a. 2
d. Miter joint b. 6
50) Which wood joint describes the c. 8
technique for joining two pieces by cutting d. 10
of 45 degrees angle? 60) 5 pcs. of a 1" x 1' x 8' lumber is how
a. Rabbet joint many board feet?
b. Butt joint a. 30
c. Lap joint b. 35
d. Miter joint c. 40
51) Which wood joint protects the room d. 45
occupants from seeing outside? 61) 50 millimeters length of a piece of
a. Rabbet joint lumber is how many decimeter?
b. Butt joint a. 5
c. Bridle joint b. 0.05
d. Miter joint c. 0.005
52) Which wood joint is used to support the d. 0.5
middle of a bench? 62) How tall is a 10 meter building in
a. Dado joint inches?
b. Butt joint a. 3.937
c. Bridle joint b. 39.37
d. Miter joint c. 393.7
53) Which unit is the basic linear unit of an d. 3,937
English system? 63) A carpenter wants to measure long
a. foot distances. Which tool is appropriate?
b. meter a. Ruler
c. yard b. Extension rule
d. inch c. Meter stick
54) Which unit is the basic linear unit of a d. Pull-push rule
Metric system? 64) A carpenter wants to mark very rough
a. foot objects. Which tool is appropriate?
b. meter a. Chalk line
c. yard b. Extension rule
d. inch c. Level
55) If you have 2 ft length of a piece of d. Border line
wood, how long is it in inches? 65) A carpenter wants to obtain vertical
a. 25 line. Which tool is appropriate?
b. 12 a. Ruler
c. 22 b. Level
d. 24 c. Plum bob
56) If you have 2 yards length of a piece of d. Pull-push rule
wood, how long is it in inches? 66) A carpenter wants to cut lumber across
a. 82 the grain. Which tool is appropriate?
b. 72 a. crosscut saw
c. 84 b. rip cut saw
d. 64 c. back saw
57) 10 yards length of wood is how many d. hacksaw
feet? 67) A carpenter wants to fasten and
a. 36 remove nails. Which tool is appropriate?
b. 35 a. Hammer
c. 30 b. Ballpen hammer
d. 24 c. Claw hammer
58) One decameter of G.I. sheets is how d. Sledge hammer
many centimeters? 68) A carpenter wants to smoothen wood
a. 10 surfaces. Which tool is appropriate?
b. 20 a. File
c. 100 b. Sand paper
d. 1,000 c. Back saw
59) A 2" x 3" x 12' lumber is how many d. Plane
board feet?
69) A mason wants to create a smooth b. 1 : 1 1/2 : 3
finish of concrete after floating. Which tool c. 1 : 2 1/2 : 5
is appropriate? d. 1 : 3 : 6
a. Brick hammer 79) A mason wants to mix concrete for a
b. Concrete trowel slab in the ground. Which mixture is
c. Plane appropriate?
d. Float a. 1 : 2 : 4
70) A mason wants to set or cut brick, b. 1 : 1 1/2 : 3
block, or stone. Which tool is appropriate? c. 1 : 2 1/2 : 5
a. Claw hammer d. 1 : 3 : 6
b. Crandall 80) A mason wants to mix concrete for
c. Mason's hammer hollow block filler. Which mixture is
d. Star drill appropriate?
71) A mason wants to repair mortar joints. a. 1 : 2 : 4
Which tool is appropriate? b. 1 : 1 1/2 : 3
a. Pointing trowel c. 1 : 2 1/2 : 5
b. Crandall d. 1 : 3 : 6
c. Cold chisel 81) Which refers to the ease with which the
d. Brick trowel fresh concrete can be molded without
72) A mason wants to mix and move mortar segregation?
in brick laying. Which tool is appropriate? a. Plasticity
a. Pointing trowel b. Consistency
b. Crandall c. Mobility
c. Cold chisel d. Grout
d. Brick trowel 82) Which refers to the degree of wetness
73) A mason wants to mix concrete. Which or slump of the concrete mixture?
tool is appropriate? a. Plasticity
a. Shovel b. Consistency
b. Buttering c. Mobility
c. Trowel d. Grout
d. Float 83) Which is an artificial stone that results
74) A mason lays bricks. Which tool is from mixing cement, sand, gravel, and
appropriate? water?
a. Shovel a. Concrete
b. Hawk b. Grout
c. Trowel c. Mortar
d. Float d. Bricks
75) Which is flat with handle at the back 84) Which is an artificial stone that results
usually made of wood? from mixing cement, sand, and water?
a. Shovel a. Concrete
b. Buttering b. Grout
c. Trowel c. Mortar
d. Float d. Bricks
76) Which tool is used in shaping and 85) Which is an artificial stone that results
forming concrete edges? from mixing cement and water?
a. Shovel a. Concrete
b. Buttering b. Grout
c. Edger c. Mortar
d. Float d. Bricks
77) A mason wants to mix concrete for 86) Which term refers to the process of
column and slab. Which mixture is finishing using mortar?
appropriate? a. Finishing
a. 1 : 2 : 4 b. Fine finishing
b. 1 : 1 1/2 : 3 c. Concreting
c. 1 : 2 1/2 : 5 d. Plastering
d. 1 : 3 : 6 87) A mason wants to lay ceramic tiles.
78) A mason wants to mix class B mixture. Where does he start?
Which mixture is correct? a. Front
a. 1 : 2 : 4 b. Left
c. Right b. ₱1,900
d. Center c. ₱2,000
88) A mason wants to lay concrete hollow d. ₱2,100
blocks. Where does he start? 97) Which tile is appropriate in the toilet
a. Front and bathroom flooring?
b. Left a. Glaze tiles
c. Right b. Ceramic tiles
d. Center c. Non-skid granite tiles
89) A mason wants to mix mortar for d. Clay tiles
plastering. What does he mix? 98) Bricks are laid where its longer side is
a. cement and water exposed to view. This arrangement is
b. cement and sand called ________.
c. sand and water a. Header
d. water and cement b. Stretcher
90) A mason wants to lay concrete hollow c. Bond
blocks into a 10 sq.m. wall. How many CHB d. Mortar
are needed? 99) The most widely used masonry
a. 100 pcs. materials for construction works are?
b. 120 pcs. a. Ashlar
c. 122.5 pcs. b. Bricks
d. 125 pcs. c. Rubble stones
91) A mason wants to lay 16" by 16" d. Concrete hollow blocks
ceramic tiles in a 10 sq.m. room. How many 100) It is a masonry material manufactured
tiles are needed? from clay and other materials?
a. 60 pcs. a. Stones
b. 61.5 pcs. b. Stucco
c. 62.5 pcs. c. Bricks
d. 63 pcs. d. Concrete pavers
92) How many CHBs are installed for a wall 101) What is the tool used to guide the
having a dimension of 2.5 m width and 4.0 vertical position in laying bricks?
m height? a. Plumb bob
a. 125 pcs. b. Water hose level
b. 122.5 pcs. c. Spirit level
c. 300 pcs. d. String or chord
d. 400 pcs. 102) Which among the following is a
93) How many 8" x 8" wall tiles are needed surface finishing tool for concrete?
in a wall 2.5 m width and 4.0 m height? a. Crandal
a. 300 pcs. b. Bolster
b. 500 pcs. c. Float
c. 550 pcs. d. Spade
d. 600 pcs. 103) Which of the following is NOT a
94) A carpenter bought 10 pcs. of a 2" x 3" requirement to consider in proportioning
x 8' lumber. If the price of lumber is ₱50.00 concrete mixture?
per board foot, how much did he pay? a. Economy
a. ₱1,800 b. Workability
b. ₱1,900 c. Strength
c. ₱2,000 d. Flexibility
d. ₱2,100 104) Concrete is said to be workable if it
95) A carpenter bought 10 pcs. of a 2" x 4" can be molded or deformed without
x 6' lumber. If the price of lumber is P50.00 segregation. This characteristic is known
per board foot, how much did he pay? as ________.
a. ₱1,800 a. Consistency
b. ₱1,900 b. Plasticity
c. ₱2,000 c. Mobility
d. ₱2,100 d. Workability
96) A carpenter bought 10 pcs. of a 2" x 6" 105) The following are factors that regulate
x 4' lumber. If the price of lumber is P50.00 the strength of concrete, EXCEPT:
per board foot, how much did he pay? a. Correct proportion of ingredients.
a. ₱1,800 b. Proper method of mixing.
c. Adequate protection of concrete during c. 30 to 36 pcs.
curing. d. 40 to 40 pcs.
d. Dropping concrete mixture from high 114) What ingredient in concrete is added
elevation. to the batch immediately before or during
106) What class of concrete mixture is its mixing to improve its durability and
consisting of 1 bag cement, 2 cu. ft. of accelerate strength development?
sand, and 4 cu. ft. of gravel or 1:2:4? a. Fine aggregates
a. Class AA b. Coarse aggregates
b. Class A c. Admixture
c. Class B d. Water
d. Class C 115) Which of the following refers to the
107) How many cubic yard of concrete do structural reinforcing member that holds or
you need to cover a space with an area of binds together the main reinforcement of a
25 square foot and a slab thickness of four column?
(4) inches? a. Lateral tie
a. 0.34 cu. yd. b. Stirrups
b. 0.32 cu. yd. c. Spiral tie
c. 0.25 cu. yd. d. Rebars
d. 0.51 cu. yd.
116) The structure that holds the poured
108) What tool or instrument is used to set- concrete until it hardens to form the
up the lateral level of a concrete fence? concrete beam or post.
a. Water hose level a. Scaffolding
b. Spirit level b. Batter board
c. Plumb bob c. Forms
d. Straight edge d. Stake
109) According to the building code of the 117) To convert from feet to get number of
Philippines, for how many days shall meters, multiply feet by?
concrete be maintained above 10 °C a. 0.3048
temperature and in a moist condition? b. 25.4
a. 3 days c. 30.48
b. 5 days d. 2.54
c. 7 days
d. 10 days
110) Which of the following are known as
coarse aggregates in a concrete mixture? TLE (5) - Carpentry and Masonry
a. Sand ANSWERS:
b. Soil
1. A
c. Gravel
2. C
d. Stones
3. B
111) What do you call the process of 4. C
hardening of concrete? 5. B
a. Curing 6. C (rip saw) - A back saw is used for
b. Setting making cuts for wood joints; cross cut saw
c. Hardening is used to cut wood across its grain; while
d. Molding circular saw is a mechanized saw.
112) What is the type of hydraulic cement 7. B
is widely used in small and large 8. D
construction including roads and 9. B
highways? 10. B
a. Hydraulic cement 11. B
b. Portland cement 12. C
c. Pozzolan cement 13. D (S4S) - S2S means two sides of the
d. Lime lumber are planed or smooth. No such term
as S3S; and Rough means that the piece of
113) How many pieces of 4" x 8" x 16"
lumber is not planed.
concrete hollow blocks (CHB) can be laid
14. C
per bag of cement as mortar?
15. A
a. 55 to 60 pcs.
16. C
b. 25 to 30 pcs.
17. C
18. D - 60 degrees for cross cut saw; and 90
degrees for a rip saw 78. C
19. A 79. A
20. A 80. D
21. B 81. A
22. B 82. B
23. A 83. A
24. B 84. C
25. A 85. B
26. A 86. D
27. C 87. D
28. D 88. B
29. C 89. B
30. C 90. D
31. A 91. C
32. D 92. A
33. A 93. B
34. B 94. C
35. D 95. C
36. B 96. C
37. D 97. C
38. C 98. B
39. B 99. D
40. C 100. C
41. D 101. A
42. B 102. C
43. D 103. D
44. A 104. B
45. B 105. D
46. C 106. B
47. B 107. A
48. B 108. B
49. B 109. C
50. D 110. C
51. A 111. A
52. C 112. B
53. D 113. A
54. B 114. C
55. D 115. B
56. B 116. C
57. C 117. A
58. D
59. B
60. C
61. A
62. C
63. D
64. A
65. C
66. A
67. C
68. D - A carpenter's plane is a hand tool
with an adjustable blade for smoothing or
shaping wood.
69. B
70. C
71. A
72. D TLE (2) – Plumbing
73. A
74. B 1) A person who installs pipes, fixtures and
75. D other apparatus to convey and supply
76. C water in buildings and to dispose and
77. B
discharge waste water. 10) It is a device installed in water lines
a. Carpenter that can be closed or opened to allow
b. Plumber installation or troubleshooting of fixtures.
c. Mason a. Check valve
d. Mechanic b. Gate valve
2) It is a receptacle or vault used to collect c. Ball valve
organic waste discharged from the house d. Float valve
sewer. 11) A schedule 40 pipe is:
a. Septic tank a. Thicker than schedule 20
b. Manhole b. Thicker than schedule 80
c. Water tank c. Thinner than schedule 10
d. Waste tank d. None among the choices
3) The semi-liquid substance accumulated 12) What material is used to seal off
at the bottom of the septic tank. threaded fittings to avoid leakage?
a. Scum a. Masking tape
b. Sediment b. Teflon tape
c. Sludge c. Scotch tape
d. Silt d. Adhesive gum
4) An underground tunnel that carries off 13) What must be installed to prevent
the drainage and waste matter from a siphonage or backflow of the water seal in
home or town is called: the drainage system?
a. Drainage system a. Vent pipe
b. Fixture b. Drain pipe
c. Sewerage c. Soil pipe
d. Sewer d. Cleanout
5) The pipe that conveys waste from 14) Which of the following is NOT required
various fixture other than from the water by the National Plumbing Code?
closet. a. Drainage pipe should be inclined properly
a. Waste pipe for a downward gravity flow of water.
b. Soil pipe b. Drainage pipe should be provided with
c. Vent pipe adequate cleanout.
d. Drain pipe c. No vent pipe is needed.
6) It is a fitting or device that provides d. All pipe joints must be well-fitted and
liquid seal to prevent the back passage of tightly connected.
air. 15) What is the ideal inclination of a
a. Loop horizontal waste pipe as recommended by
b. Fixture the National Plumbing Code?
c. Sewer a. 2% slope
d. Trap b. 3% slope
7) The tools used to tighten or loosen c. 4% slope
hexagonal fittings like unions and other d. 0% slope or level position
metal fittings. 16) For purposes of troubleshooting in case
a. Pipe vise of stoppage of flow, what must be installed
b. Pliers in the pipe system?
c. Wrenches a. Vent pipe
d. Threader b. Cleanout
8) The kind of fitting used to connect fixed c. Drain
pipe and fixtures is a ________. d. Tee fitting
a. Wye fitting 17) Plastic pipes are commonly used in
b. Coupling water fixture installation nowadays. Which
c. Union fitting of the following is preferred?
d. Reducer a. Polyvinyl chloride (PVC)
9) A fitting or device installed at the inlet of b. Chlorinated PVC (CPVC)
a water pump to prevent backflow of water. c. Cross-linked polyethylene (PEX)
a. Ball valve d. Polyethylene
b. Check valve 18) The Plumbing Code on House Drain
c. Blackwater valve provides that there must be no more than
d. Gate valve two closets that shall discharge into a
________ pipe diameter.
a. 3 inches or 75 mm 27) A plumber wants to cut pipes. Which
b. 80 mm holding tool is needed?
c. less than 75 mm a. Vise grip
d. 70 mm b. Pipe threader
19) A metal or plastic fitting used to c. Yoke vise
connect smaller pipe from a larger pipe. d. Pipe wrench
a. Reducer 28) A plumber wants to hold pipe by hand.
b. Elbow What tool is needed?
c. Union a. Vise grip
d. Coupling b. Pipe threader
20) As a basic prerequisite for most c. Yoke vise
plumbing project, what should be d. Pipe wrench
connected for each faucet, toilet, and 29) The following are good plumbing
fixtures? practices, EXCEPT:
a. Fixture shutoffs a. rainwater harvesting
b. Main shutoffs b. water conservation
c. Intermediate shutoffs c. gray water recycling
d. Valves d. excessive water consumption
21) A plumber wants to tighten and loosen 30) Water contaminants are being forced
pipes. Which tool is appropriate? back into the water piping system. Which
a. Pipe cutter term is referred to?
b. Flux a. Water flow
c. Pipe wrench b. Back flow
d. Butane torch c. Pressure
22) A plumber wants to cut metal pipe. d. Harvesting
Which tool is appropriate? 31) The following are examples of plumbing
a. Hacksaw fixtures, EXCEPT:
b. Back saw a. water closet
c. Handsaw b. drainage
d. Drywall knife c. shower
23) Metal with semi-rigid auger whose end d. urinals
is usually fitted with a hook or corkscrew is 32) Which statement is NOT true about
called ________. plumbing standards based on Republic Act
a. plumber's snake 1378 which is known as "Plumbing Law"?
b. plunger a. Each fixture directly connected to the
c. valve drainage system shall be equipped with a
d. bushing water-sealed trap.
24) If your toilet has trouble, you use b. Plumbing shall be designed and adjusted
rubber funnel-shape instrument attached to to use the maximum quantity of water
the end of the handle for unblocking. What consistent with proper performance and
is this tool? cleaning.
a. plumber's snake c. Water closet must be located in a room
b. valve which is properly lighted and ventilated.
c. plunger d. No substance which will clog the pipes,
d. bushing produce explosive mixtures, destroy the
pipes or their joints or interfere unduly with
25) Which plumbing tool is used for gripping
the sewage disposal process shall be
large pipes and irregular objects?
allowed to enter the building drainage
a. monkey wrench
system.
b. chain wrench
c. yoke vise 33) A compartment that receives solid or
d. pipe wrench liquid waste, located below the normal
grade of the gravity system is called
26) A plumber wants to create thread
________.
outside pipe by hand. Which tool is
a. septic
appropriate?
b. sump
a. Pipe cutter
c. trap
b. Pipe threader
d. interceptor
c. Yoke vise
d. Pipe wrench 34) Which is true toxic substance?
a. Hazardous to human health
b. A fixture drain for a laboratory
c. Not hazardous to human health a. Union
d. Bedpan washer and sterilizer drain b. Trap
35) Water that is safe for drinking, cooking, c. Backflow preventer
and personal use is ________. d. Pump
a. potable 44) A plumber wants to shut off the flow of
b. purified water just 90 degrees turn. Which valve is
c. clean appropriate?
d. healthy a. Gate valve
36) Which among the following best b. Globe valve
describes a toilet bowl? c. Check valve
a. A room or booth containing a toilet d. Angle valve
b. The Box Type compartment holding 45) What do you call those flexible
water for flushing the toilet waterproof ribbon for covering threaded
c. An opening in the wall or ceiling near pipes joints to prevent leakage?
d. The device that provides a supply of a. Rubber bond
water and/or its disposal, e.g. sinks, tubs, b. Masking tape
toilet c. Teflon tape
37) Plumbing ventilation means to ________. d. Tape
a. carry sewer gas out and relieve pressure 46) If the end of a PVC pipe is fitted with a
of the drainage system male adopter, what fitting will be used to
b. discourage corrosion in the drainage stop the flow of the water?
piping a. Elbow
c. maintain the trap seals b. Coupling
d. give pressure differentials in the public c. Cap
sewer d. Plug
38) Rainwater from the roof down to the 47) How many PVC pipes can be installed
ground passes through what pipe? in a 7.50 meter distance?
a. Down spout a. 2 pcs.
b. Conductor b. 2.5 pcs.
c. Gutter c. 3 pcs.
d. Vent d. 3.5 pcs.
39) A pipe that conveys only liquid waste is 48) If the end of the PVC pipe is fitted with
called ________. a female adopter, what fitting will be used
a. vent pipe to stop the flow of the water?
b. soil pipe a. Elbow
c. main pipe b. Coupling
d. waste pipe c. Cap
40) If you install water supply inside the d. Plug
building, what is the diameter of pipes 49) A plumber wants to connect two length
needed? of pipes. Which fitting is necessary?
a. 4 inches a. Coupling
b. 1 inch b. Elbow
c. 0.75 inch c. Tee
d. 0.5 inch d. Pipe wrench
41) In which type of pipes does portable 50) If there is leaking in the water supply of
water travel lavatory, sink, and water closet, which
a. ABS pipes valve are you going to shut off?
b. Galvanized pipes a. Gate valve
c. Cast iron pipes b. Globe valve
d. PVC pipes (orange) c. Check valve
42) If your water system has leak, where d. Angle valve
can you shut off the flow of water? 51) If you install a soil pipe, what is the
a. Gate valve standard pitch or slope?
b. Globe valve a. 5%
c. Check valve b. 10%
d. Angle valve c. 2%
43) A plumber wants to install a liquid seal d. 1%
to prevent sewer gasses from entering the 52) If you put source of potable water, what
building. What device is needed? is the minimum safe distance from the
septic tank? a. 12 ft.
a. 15 meters b. 2.0 m
b. 10 meters c. 6.0 m
c. 5 meters d. 10 ft.
d. 20 meters 58) If you want to estimate the number of
53) No cesspool, septic tank or drain fields G.I. pipes needed from your house to the
shall be located within how many meter main supply, what is the standard length of
radius from the well? a G.I. pipe that you are going to use?
a. 15 meters a. 20.0 m
b. 10 meters b. 6 ft.
c. 50 meters c. 3.0 m
d. 45 meters d. 20 ft.
54) If you plan to drill for a well that can 59) If you want to estimate the number of
supply water for public use, what is the PVC pipes needed from your house to the
minimum meter radius from a well to the main supply, what is the standard length of
residences? a PVC pipe that you are going to use?
a. 150 meters a. 20.0 m
b. 100 meters b. 6 ft.
c. 50 meters c. 3.0 m
d. 200 meters d. 20 ft.
55) Every trap for bath tubs, lavatories, 60) All plumbing fixtures must have P-trap,
sink, and other similar fixture shall be EXCEPT:
_________. a. lavatory
a. self-regulating b. water closet
b. tight c. sink
c. fix d. bath tub
d. self cleaning
56) There should be no concrete sanitary
sewers existing within how many meter
radius from the well?
a. 15 meters
b. 10 meters
c. 50 meters
d. 45 meters
57) The standard length of a PVC pipe is
_________.