Professional Documents
Culture Documents
Given data
Sw Krw Kro Case Oil viscosity,cp Water viscosity,cp
0.20 0 0.800 1 50 0.5
0.25 0.002 0.610 2 5 0.5
0.30 0.009 0.470 3 0.4 1.0
0.35 0.020 0.370
0.40 0.033 0.285
0.45 0.051 0.220
0.50 0.075 0.163
0.55 0.100 0.120
0.60 0.132 0.081
0.65 0.170 0.050
0.70 0.208 0.027
0.75 0.251 0.010
0.80 0.300 0
solution
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2 Vis
Vis
0.1
Vis
0
0.00 0.20 0.40 0.60
Sw
Step 7: define values of mobility ratio,(M) and shock front mobility ratio, (Ms) for the three cases
front and end point relative permeability’s calculated using the data (fractional flow)
Viscosity ratio=0.01
Viscosity ratio=0.1
Viscosity ratio=2.5
Sw
he three cases
RELATIVE PERMEABILITY SATURATION DATA FOR BUCKLEY- LEVERET METHOD (FROM DAKE 1988)
Given data
Sw Krw Kro Water Flooding
0.20 0 0.800 Oil viscosity,cp 5
0.25 0.002 0.610 Water viscosity,cp 0.5
0.30 0.009 0.470 Bo, bbl/stb 1.3
0.35 0.020 0.370 Bw, bbl/stb 1.0
0.40 0.033 0.285 porosity 0.18
0.45 0.051 0.220 Swc 0.2
0.50 0.075 0.163 Sor 0.2
0.55 0.100 0.120 Dip angle, degree 0
0.60 0.132 0.081 Reservoir thickness, ft 40
0.65 0.170 0.050 Distance between injection wells, ft 625
0.70 0.208 0.027 Distance between injectors and producers, ft 2000
0.75 0.251 0.010 Water injection Rate, b/d/well 1000
0.80 0.300 0
0.1 0.8
From Fig (1) fwe,(Find fw vs each valuw of Swe) From Fig (1)
for column of (Swe) S*we,mid points of each saturation increment, Sw Swe fwe ∆ Swe ∆ fwe ∆ fwe/∆ Swe S*we Wid
0.2 0.45 0.699 - - - - -
0.25 0.5 0.821 0.05 0.122 2.440 0.475 0.410
0.3 0.55 0.893 0.05 0.072 1.440 0.525 0.694
0.35 0.6 0.942 0.05 0.049 0.980 0.575 1.020
0.4 0.65 0.971 0.05 0.029 0.580 0.625 1.724
0.45 0.7 0.987 0.05 0.016 0.320 0.675 3.125
0.5 0.75 0.996 0.05 0.009 0.180 0.725 5.556
0.55 0.8 1 0.05 0.004 0.080 0.775 12.500
0.6 0.85
0.65 0.9
0.7 0.95
0.75 1
0.8 -
From Fig (1)
From Fig (1) f*we, (Find fw for the corresponding values of S*we) S*we Wid (PV) S*we-Swc f*we 1-f*we Npd (PV) Time (years)
- - - - - - -
Npd, The oil recovery after breakthrough, 0.475 0.410 0.275 0.765 0.235 0.371 1.80
0.525 0.694 0.325 0.87 0.130 0.415 3.05
Time (t) ,years 0.575 1.020 0.375 0.925 0.075 0.452 4.48
t=(Wid (625×40×2000×0.18))/(1000×5.615×365)=4.39×Wid 0.625 1.724 0.425 0.962 0.038 0.491 7.57
0.675 3.125 0.475 0.982 0.018 0.531 13.72
0.725 5.556 0.525 0.993 0.007 0.564 24.39
0.775 12.500 0.575
0.6 0.6
0.5 0.5
Npd (PV)
Npd (PV)
0.3 0.3
0.2 0.2
0.1 0.1
0.0 0.0
0 1 2 3 4 5 6 7 0 5 10 15 20 25 30
Wid (PV) time (yrs)
Given data
Sw Krw Kro Case Oil viscosity,cp Water viscosity,cp
0.20 0 0.800 Water 5 0.5
0.25 0.002 0.610 Polymer_1 5 1.5
0.30 0.009 0.470 polymer_2 5 3.0
0.35 0.020 0.370
0.40 0.033 0.285
0.45 0.051 0.220
0.50 0.075 0.163
0.55 0.100 0.120
0.60 0.132 0.081
0.65 0.170 0.050
0.70 0.208 0.027
0.75 0.251 0.010
0.80 0.300 0
solution
0.9
0.8
0.7
0.6
0.5
0.4
0.3
Sw
Step 7: define values of mobility ratio,(M) and shock front mobility ratio, (Ms) for the three cases
front and end point relative permeability’s calculated using the data (fractional flow)
he three cases