Professional Documents
Culture Documents
100,
New Sidco Industrial Estate, Srinagar, Hosur, Tamil Nadu
Accreditation Standard ISO/IEC 17025: 2005
Certificate Number CC-2688 (in lieu of C-1062, C-1063 & Page 1 of 14
C-1402)
ELECTRO-TECHNICAL CALIBRATION
I. SOURCE
8. Temperature Simulation#
Thermocouple Using Fluke 5500A
J- Type (-) 200 ºC to 750 ºC 0.25 ºC to 0.22 ºC Multi-Product Calibrator
K- Type (-)190 ºC to 1300 ºC 0.30 ºC to 0.36 ºC by Direct Method
R- Type 100 ºC to 1700 ºC 0.37 ºC to 0.37 ºC
S- Type 100 ºC to 1700 ºC 0.41 ºC to 0.41 ºC
N- Type (-) 190 ºC to 1300 ºC 0.31 ºC to 0.36 ºC
9. Temperature Simulation #
(Resistance Temperature Detector)
Pt-100 (-) 190 ºC to 800 ºC 0.09 ºC to 0.25 ºC Using Fluke 5500A
Multi-Product Calibrator
by Direct Method
II. MEASURE
7. Temperature Simulation#
Thermocouple Using Fluke 5500A
J- Type (-) 200 ºC to 750 ºC 0.24 ºC to 0.22 ºC Multi-Product Calibrator
K- Type (-) 190 ºC to 1300 ºC 0.30 ºC to 0.36 ºC by Direct Method
R- Type 100 ºC to 1700 ºC 0.36 ºC to 0.36 ºC
S- Type 100 ºC to 1700 ºC 0.40 ºC to 0.40 ºC
N- Type (-) 190 ºC to 1300 ºC 0.30 ºC to 0.36 ºC
15. Lever Dial Gauge$ 0 to 0.14 mm/0.001 mm 1.2 µm Using Universal Length
0 to 1.0 mm/0.01 mm 5.9 µm Measuring Machine by
Comparison method
by Comparison method
4.2 x √
(L & W in mm)
200 m
Level by Comparison
method
2. Hydraulic Pressure- 0 bar to 1000 bar 0.065 % rdg Using Digital Pressure
Pressure Gauge Calibrator using
(Dial/Digital Pressure hydraulic Comparator &
Calibrator / Pressure DMM as read unit for
Transducers/Pressure transmitter as per Based
Transmitter) # on DKD-R6-1
3. Pneumatic Pressure- 0 to 20 bar 0.011 bar Using Digital Pressure
Pressure Gauge Calibrator & DMM as
(Dial/ Digital / Read Unit for
Transducer / Transmitter as per
Transmitter & Based on DKD-R6-1
Pressure Switches) #
4. Vacuum Gauge- 0 to (-) 0.80 bar 0.0064 bar Using Digital Vacuum
(Dial/ Digital / Calibrator & DMM as
Transducers / Read Unit for
Transmitter) # Transmitter as per
Based on DKD-R6-1
Using Built in
Pneumatic/Vacuum
Pressure Pump
IV. ACOUSTICS
1. Rubber Hardness Shore A/Shore D 1.84 Shore A / Shore D Using Rubber Hardness
Tester for Spring Tester Calibrator as per
Force Calibration$ Based on ASTM
D2240-15
VII. WEIGHTS
IX. VOLUME
THERMAL CALIBRATION
I. TEMPERATURE