Professional Documents
Culture Documents
1 LCM 1
2 FPC Assy 1
3 A Cover Assy 1
4 Battery 1
5 FPC Assy 1
7 Vibrator 1
10 Earphone Socket 1
6 Speaker 1
8 MIC Gel Case 1
9 Antenna Assy 1
11 Back Cover Glass Assy 1
12 Flash Lamp Ornamen 1
13 5M Camera 1
14 Flash Lamp Case 1
15 Antenna Assy 1
16 LCD Connector Support 1
17 BB Shielding Lid 1
18 Main PCBA 1
19 FPC Assy 1
20 8M Camera 1
21 Square Receiver 1
22 SIM Tray 1
23 Volume Keypad 1
24 Power Keypad 1
Remarks: This list is only for your reference, and there wouldn’t be any notification in case of any
change in future. Please consult with the local Gionee after-sales support for more information if any
doubt.
Signal Flow and Fault Diagnosis
No signal
NO NO
Upgrade to Check the main Check
latest software antenna coaxial line
YES NO NO
Check U3101.is Check U1001 Replace
normal or not? is normal or U1001 Return
not
NO Replace
U3101
Signal Flow and Fault Diagnosis
No display
Check if
J1701 is
NO 1.Upgrade NO deformed or
Check if is there software? 2. poor
power-on currency Exclude LCD soldered?
and sound fault?
YES YES YE
Repair as No OVER S Replace
power-on process J1701
NO`
NO YES
Replace Replace U1701
Return U1001
Signal Flow and Fault Diagnosis
Re-solder
YES YES YES
Replace TP OVER or replace
J1701
NO
Check J1701’s
data, clock,eint and
reset is normal or
not?
NO
YES
Replace
Return
U1001
Signal Flow and Fault Diagnosis
No photograph
Check J1801 and
NO NO J1802 are
Check the deformed, poor-
Restore factory camera assy is
setting soldered or
OK or not? abnormal
resistance value?
YE OVE YE Replace J1801
OVER YE
S R S or J1802
S
NO
Re-solder NO Replace
NO J1801/J18 U1802
02
Replace
U1001
NO
Return
Signal Flow and Fault Diagnosis
Keypad failure
NO NO
Check FPC is
connected Check J2101
properly or not?
YE YE Replace
Replace keypad J2101
S S
FPC
YES
Check J2101’s Check J2101’s
return protection resistance value
NO diodes
Replace NO
U1001orU2001 `
Signal Flow and Fault Diagnosis
No incoming sound
NO NO
Check the Insert earpiece to Check
receiver setting see if it displays receiver is
is OK or not? fault prompt? normal or not?
NO
No Check FPC’s
Replace
Return resistance value
U1001
is normal or not?
YES
Replace FPC
Signal Flow and Fault Diagnosis
No oscillation
NO Check if J2001 is NO Check if
Restore factory deformed or J2001’s eighth
setting abnormal pin PWM has
resistance value? ripple voltage?
YES YES
OVER Yes Replace Replace
vibrator assy vibrator assy
NO
Replace
Return U2001
Signal Flow and Fault Diagnosis
WIFI/BT/FM failure
NO NO Check FL1505
Upgrade Check antenna AND
and its contactor Y1501waveform
software
is normal or not?
NO
NO NO Check if U5001 is NO Replace
Replace poor soldered or FL1502,FL1503
return U1001 has abnormal and FL1504 is OK
resistance value? or not?
YES
Replace or re- YES Replace FL1502,FL1503
solder U5001 and FL1504
Signal Flow and Fault Diagnosis
No ring
NO NO Test if SPKN and
Restore factory Check speaker SPKP’s two ends
is ok or not? have output
setting
waveform?
NO
NO NO
Check if U1601
Replace
has enable and
Return U1001 audio signal?
YES
YES Replace
U1601
OVER
Signal Flow and Fault Diagnosis
NO
Replace
U2001
Signal Flow and Fault Diagnosis
Compass failure
NO NO Test U1904’s
Start compass and then Upgrade SCL4 and SDA4
calibrate by waving resistance value is
phone on a route like 8
software
normal or not?
YE YE YES Replace
OVER OVER
S S U1904
Check if the NO
NO NO
Replace Check U1905 is power supply
U1001 OK or not? voltage is OK or
not?
NO
YES
YES
Resolder
Return Resolder U2001
U1905
Signal Flow and Fault Diagnosis
Accelerator failure
NO
NO NO Check NO Check if the
Replace U1905 i power supply
return
U1001 s OK or voltage is OK or
not? not?
YES
YES
Resolder U2001
Resolder U1905