Professional Documents
Culture Documents
simulated by ANSYS
Model Loading
260 mm
B C 1m
End B
Support Bracket
100 mm 2.5m
4m
Post 26 Post 1
Axial Le =0.05λ
Circumferential N =15
Coordinate System Transfer
2. Transfer the CS of all nodes from Cartesian to Cylindrical
Copy Copy
DATA: t DATA: H
Loading Signal in txt format
Past it to Note,
then create an
txt file
Array Parameter Table for loading signal
Create the Array Parameter Table (167×1)
1.
2.
3.
4.
5.
6.
Using the ‘txt file’
for Loading Signal
SOLUTION: Transient Analysis
Setup the (ITS)
dt< 0.8×(Le/Velocity)
Apply the loading signal on the nodes
Axis-symmetric Loading for L or T modes
T(0,1)
Solve
檢測盲區
Elbow Coating