Professional Documents
Culture Documents
Fluorosurfactant
Technical Information
Description Typical Properties
Capstone FS-63 is a water-soluble, anionic
™
Appearance Pale yellow to amber liquid
fluorosurfactant that gives low aqueous surface tensions
pH 7.5–9.0
with minimal foaming. Capstone™ FS-63 offers excellent
Specific Gravity 1.1 g/mL
wetting, leveling, anti-block, and dirt pick-up resistance.
This fluorosurfactant can be used in a variety of Freeze-thaw stable. Mix well before
Stability
use.
applications, including architectural coatings, industrial
35% solids
finishes, floor care formulations, wood coatings, specialty
Composition 20% isopropyl alcohol
cleaners, and metal cleaning. 45% water
Shelf Life 5 years
Applications
Flash Point 26 °C (79 °F)
Water-Based Floor Care (Finishes, Waxes, and Polishes)
Foam Can foam with excessive shaking
• Provides wetting and enhanced leveling
• Good re-wet characteristics in multi-coat applications
Performance
• Reduces cratering and provides faster spreading
Surface Tension
• Suggested use rates are 0.02–0.05% active ingredient
(A.I.) in total formulation by weight Capstone™ FS-63 Surface Tension in Water
70
• Suggested use rates are 0.02–0.04% A.I. in wet paint Concentration (% A.I.) in Deionized (DI) Water
by weight
30.9 50
30
40
21.1 32.6
19.7 29.4
20 17.0 17.3 30
16.3 15.7 16.4
20
10
10
0
0
0 Paint A Paint B
Joncryl 95 Joncryl 8383 Joncryl 2561 U910 UC84 Encor 309 Bayhydrol
XP 2557 Blank Commercial Paint Water CA 0.02% A.I. Capstone™ FS-63 Water CA
Blank Commercial Resin 0.05% A.I. Capstone™ FS-63 Blank Commercial Paint Oil CA 0.02% A.I. Capstone™ FS-63 Oil CA
10
Semi-Gloss Latex Paints • Are in compliance with REACH requirements
9 • Are listed on TSCA inventory
8
For questions regarding technical data, commercialization,
7
6.3
and sampling:
Blocking Score
6 5.8
5 Chemours Fluoroproducts
4 3.3
Technical Inquiries
3
CAUTION: Do not use or resell Chemours materials in medical applications involving implantation in the human body or contact with internal bodily fluids or tissues unless agreed to by Seller in a written
agreement covering such use. For further information, please contact your Chemours representative. For medical emergencies, spills, or other critical situations, call (866) 595-1473 within the United
States. For those outside of the United States, call (302) 773-2000.
The information set forth herein is furnished free of charge and based on technical data that Chemours believes to be reliable. It is intended for use by persons having technical skill, at their own discretion
and risk. The handling precaution information contained herein is given with the understanding that those using it will satisfy themselves that their particular conditions of use present no health or safety
hazards. Because conditions of product use are outside our control, Chemours makes no warranties, express or implied, and assumes no liability in connection with any use of this information. As with any
material, evaluation of any compound under end-use conditions prior to specification is essential. Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
NO PART OF THIS MATERIAL MAY BE REPRODUCED, STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY ANY MEANS ELECTRONIC, MECHANICAL, PHOTOCOPYING, RECORDING OR OTHERWISE
WITHOUT THE PRIOR WRITTEN PERMISSION OF CHEMOURS.
© 2018 The Chemours Company FC, LLC. Capstone™ is a trademark of The Chemours Company FC, LLC. Chemours™ and the Chemours Logo are trademarks of The Chemours Company.
Replaces: K-22136-3
C-10908 (6/18)