Professional Documents
Culture Documents
Tier
3
Intended Service
Marine and Offshore Applications- For Fresh/Sea water, Fire Main, Water Spray System, Foam,
Sprinkler, Bilge, Ballast, Sanitary, Fuel/Lube/Hydraulic Oil, Tank Cleaning, Gas, Air Piping and Non
Essential Systems.
Description
MegaPress Stainless Steel Cold Press fittings and pipe systems with Smart Connect for the US sizes
1/2" to 2" and also sizes as per DIN EN 10255. The Smart Connect feature enables quick identification
of unpressed fittings. The fittings are offered with different sealing elements EPDM and FKM. The press
connection is performed by a hydraulic press tool.
MegaPress CuNi 90/10 Cold Press fittings and pipe systems with Smart Connect for the US sizes 1/2" to
2" and also sizes as per DIN EN 10255. The Smart Connect feature enables quick identification of
unpressed fittings. The fittings are offered with a FKM sealing element. The press connection is
performed by a hydraulic press tool.
Ratings
Stainless fittings:
MegaPress Stainless 316 EPDM Sealing Element; Maximum Operating Temperature: 0ºF to 250 ºF
(-18ºC to 120ºC).
MegaPress Stainless 304 FKM Sealing Element; Operating temperature: 14°F to 284°F (-10°C to
140°C).
These fittings are designed to be installed with ASTM A312 stainless steel pipes.
04/25/2020 9:45:32 PM Copyright 2019 American Bureau of Shipping. All rights reserved. Page 1 of 4
Certificate Number: 17-HS1683223-PDA-DUP
The fittings may also be used with Schedule 80 pipe limited to the maximum pressure listed above.
Applications as per 4-6-2/Table 9 &10 of the Steel Vessel Rules for compression coupling.
CuNi fittings:
M.A.W.P. = 1.6 MPa (232 psi) MegaPress CuNi 90/10 with FKM Maximum Operating Temperature: 14°F
to 284°F (-10°C to 140°C).
The fittings are designed to be installed with Class 200 and Schedule 40 90/10 copper nickel pipe.
Applications as per 4-6-2/Table 9 &10 of the Steel Vessel Rules for compression couplings.
Slip on joint requirements shall not apply to MegaPress CuNi 90/10 fittings.
Service Restrictions
Unit Certification is not required for this product. If the manufacturer or purchaser request an ABS
Certificate for compliance with a specification or standard, the specification or standard, including
inspection standards and tolerances, must be clearly defined.
- EPDM should not be used in Fuel, Lube Oil & Hydraulic applications.
- The press-fitting system is not to be used in any direct connection to the shell of the vessel (only
inboard of required shell valves).
- Only to be used in class III piping and not to be used in class 1 and class II piping per 4-6-2/Table 11 of
the Steel Vessel Rules.
Comments
The Manufacturer has provided a declaration about the control of, or the lack of Asbestos in this product.
- Each particular application, including deck/bulkhead penetrations, of the press fitting system is to be
specifically approved in connection with the relevant system and installation.
- The manufacturer's instructions regarding compatibility of pipe/ fitting/ sealing ring materials and
working media are to be followed.
- For temperatures below -18 ºC (0 ºF) Charpy Impact test is required as per 2-3-13/15 of the Steel
Vessels Rules.
022-17 Test Certificate 021-17_304_2, dated 23-05-2017, Revision-A, Testing Facility: IHA; Pages: 7:-
024-17 Test Certificate 021-17_316_12, dated 23-05-2017, Revision-A, Testing Facility: IHA; Pages: 7:-
025-17 Test Certificate 021-17_304_12, dated 23-05-2017, Revision-A, Testing Facility: IHA; Pages 7:-
04/25/2020 9:45:32 PM Copyright 2019 American Bureau of Shipping. All rights reserved. Page 2 of 4
Certificate Number: 17-HS1683223-PDA-DUP
304 Stainless Dwg - MegaPress Stainless 304 Drawings dated 11.29.2016, Revision:-, Pages:-
316 Assembly Drawings - Assembly drawings Megapress Stainless 316, Revision:-, Pages:-
IM-MP (Stainless) 591324 1017, Installation Manual-MP (Stainless) 591324 1017, Revision: -, Pages: -
PI-MP 590078 0616 (MegaPress Copper Nickel) - Product Insructions 590078 0317(MegaPress CuNi
90-10), Revision:-, Pages:-
Prüfbericht Nr 120005000 vom – MPA_Megapress CuNi dated 14-09-2017, Revision A, Testing Facility:
MPA NRW; Pages:51:-
IM-MP (CuNi) 593258 1017 - Viega MegaPress CuNi System Installation Manual, Revision:-, Pages:
27:-
023-17 Test Certificate 023-17_Cunife_2, dated 23-05-2017, Revision-A, Testing Facility: IHA; Pages:
7:-
026-17 Test Certificate 026-17_Cunife_12, dated 23-05-2017, Revision-A, Testing Facility: IHA; Pages:
7:-
Term of Validity
This Product Design Assessment (PDA) Certificate 17-HS1683223-PDA-DUP, dated 27/Nov/2017
remains valid until 26/Nov/2022 or until the Rules or specifications used in the assessment are revised
(whichever occurs first).
This PDA is intended for a product to be installed on an ABS classed vessel, MODU or facility which is in
existence or under contract for construction on the date of the ABS Rules or specifications used to
evaluate the Product.
Use of the Product on an ABS classed vessel, MODU or facility which is contracted after the validity date
of the ABS Rules and specifications used to evaluate the Product, will require re-evaluation of the PDA.
Use of the Product for non ABS classed vessels, MODUs or facilities is to be to an agreement between
the manufacturer and intended client.
ABS Rules
Rules for Conditions of Classification, Part 1 2017 Steel Vessels Rules 1-1-4/7.7, 1-1-A3, 1-1-A4, which
covers the following:
2017 Steel Vessel 4-6-1/5, 4-6-1/7, 4-6-2/3, 4-6-2/5.1, 4-6-2/5.9 and 4-6-2/Table 4/Table 10/Table
11/Table 12;
2017 ABS Rules for Conditions of Classification, Part 1 – Offshore Units and Structures 1-1-4/9.7,
1-1-A2, 1-1-A3, which covers the following:
2017 Mobile Offshore Drilling Units 1-1-4/9.7, 1-1-A2 & A3, 4-2-1/5, 4-2-1/11.13, 4-2-2/5 and 4-2-2/5.7;
Rules for Conditions of Classification, Part 1 - 2017 High Speed Craft 1-1-4/11.9, 1-1-A2, 1-1-A3, which
covers the following:
High Speed Naval Craft Rules (2017): 4-6-2/5.9
International Standards
IACS UR P2.11.2001/Rev.4 2016; ISO 19921 : 2005;
EU-MED Standards
NA
National Standards
04/25/2020 9:45:32 PM Copyright 2019 American Bureau of Shipping. All rights reserved. Page 3 of 4
Certificate Number: 17-HS1683223-PDA-DUP
NA
Government Standards
NA
Other Standards
NA
04/25/2020 9:45:32 PM Copyright 2019 American Bureau of Shipping. All rights reserved. Page 4 of 4