Professional Documents
Culture Documents
1980 To be continued…
Start of deve-
1976 lopment of the
ROBO-POT 1994
Founding of MRW. Relocation to the
system
Development and
manufacturing of
new company
building (Iggingen
2015
watches and watch industrial estate) ROBO-POT 4.0
testing instruments
1985 • more than 2,800
systems in use
ROBO-POT 1.0
2005
goes into • 30 employees
production
Start of
1989 ROBO-POT 3.0
Production of
ROBO-POT 2.0
We pick up where conventional
feeding technology leaves off
For more than 30 years, we have been your Everything in one place – from the idea
partner for individual feeding solutions with through to a complete feeding solution:
camera technology. • Advice
As a result, we are not only the oldest but • Planning
also the most experienced provider for high- • Layout
performance sorting, feeding and allocation • Mechanics
tasks.
• Electronics
• Software
• After-sales support
ROBO-POTSYSTEM:
Our arguments
• Minimum effort for the interfaces
• Also prepared for future feeding tasks
• Short set-up times, high machine availability
• Low susceptibility to failure
• Quick rectification of faults
• High process reliability. No faults and damage.
Downstream machines always get correct parts
• Low integration and operating effort
• Minimal maintenance and servicing effort
• High security of investment
Your benefits
• Everything in one place with just one contact person
• Flexible, open feeding system. Suitable for
a variety of components and a wide range of parts
• Low, and sometimes no tooling effort
• The least possible mechanical manipulation
• Automatic interference suppression functions
• Components are feed with sorting accuracy
and in the correct position
• Easy to set up and operate
• Robust. Suitable for rough, industrial day-to-day
life, self-cleaning functions
• Long product life cycles. Decades long spare parts
supply
Vibration
control unit
VIB control 04
Computer 4.0 For controlling the vibrating drive
• Electronic control, dependent on the
The computer evaluates the recognisable image and, loading status of the bowl
using this data, controls all of the subsequent processes • Up to 70% lower power consumption
in the feeding system. For example: blow-back, removal, by the drive
turning, occasional buffering, dispensing…
• With a link to the computer.
• Disk space for up to 120 components The appropriate settings for the control
• Digital I/Os and Profibus/Profinet unit are saved for each component
are available for connection
to the machine peripherals
MRW
engineering
Complete
problem-solving expertise:
• Advice
• Planning
• CAD
• Acceptance
• Instruction / training
• Service & support
And there‘s
Additional sensors
• For the recognition of features which cannot be seen in
the lateral silhouette: imprints, blind holes, embossing…
• Equipped with lasers, colour sensors, image sensors,
image processing systems…
Isolation
chambers
• One part each for buffering, holding ready
and clocked output
• Used if parts nest and cannot be piled up one
behind another and a buffer of available
parts is needed
Turning station
• For turning incorrectly oriented parts
• For increasing the production rate, for adjusting incorrect
positioning, as a measure for conserving components.
Component is turned instead of blown back into the bowl
Handling assemblies
at the end of the conveyor
Lateral pusher for Revolving holding Tipper, Delivery nests,
pushing 90° across device for vertical deliver vertically in deliver individually
from the conveyor delivery hose or pipe or repeatedly
Separating
filter
For dividing components between
up to four outlet conveyors
still more...
Accumulation sections
• For queuing multiple components behind one another,
accumulating, creating a pushing strand
• As a linear vibration section or accumulating conveyor
Separator
„Flip flop“
• For isolating parts out
of the accumulation
Stocking
Hopper for increasing the autonomous
running time and reducing the fill level
in the vibratory parts feeder
• With belt or vibration drive
Standard hopper
• Ascending conveyor hopper
• Storage table