Professional Documents
Culture Documents
Forges
Grinders
Micarta
Belt Grinder Ideas
Are you a DIY'er? Are you comfortable fabricating simple machinery? If so, you NEED a decent
Featured Articles belt grinder, preferably in the 2"x72" belt size. You'll find a thousand and one uses for it once
you put one together, and it's very easy to put one together. This page is all about the
37 Ways to Use GCode resources and ideas you'll need to plan your own belt grinder project.
With CAM
Belt Grinders are great for blending smoothly flowing shapes, deburring, and generally
CNC Lathe & Turning
improving the look of parts. For the latter, you also want to make sure the surface finish of your
GCodes
other machining processes is all that it can be. Check out our guide to Milling Machine Surface
Work Offsets Finish Tips for some ideas.
CNC Tapping
Circular Interpolation
Feeds and
Speeds:
Made Easy.
Try G-
Wizard
Bill Pace grinder has been made by several on the HSM boards. Shows tracking mechanism at
the top very well...
GCode is
complicated.
G-Wizard Editor
makes it easy.
Try It!
Andrew McLurkin's Bader III is mounted on its side to make it easier for him to do fine work.
Note the very small wheels and wrap around tool rest so he can get inside tight areas.
Dozier makes some of the best grinders there are. This series shows off the different
accessory configurations they have available:
3 Configurations, left to right: the basic wheel, slack belt grinding, and a platen grinding
setup...
It would be knife to turn this grinder horizontally like McLurkin shows at the top of this page
and then use this attachment with a rest that fit nicely. You could really get into some tight
spots with it!
Tooling arm rack is a clever accessory that makes changing the configuration fast and easy.
Here is the grinder sporting a platen attachment, and a rest on the lhs photo. Note the solid
CNC construction. Minimal welding. Picture on far right is the slack belt attachment.
Or, how about a rotary platen? Seems like it could take the place of several of the other
accessories. The actual "platen" is a rotary belt under tension with rollers.
Great looking kit by Simplatic. Looks like a good plasma cutting job...
The rest is slightly reminiscent of the "Dream" KMG rest shown above. The Wilmont is a nice
variation on the KMG and the site includes plans for a home shop model you can build.
It has 5 interchangeable contact wheels that can be indexed into position--these 3 plus the
other 2 corners of the triangle have larger wheels...
Get Better Tool Life, Surface Finish, and Material Removal Rates Fast.
It's that easy. You can install and get results in a matter of minutes.
Home Blog Online CNC Training CNC Beginners Start About
Here
Software Feeds and Speeds Privacy Policy
Software Feeds and Speeds G-Code Tutorial
DIY CNC
GW Calculator G-Code CNC Machining &
Manufacturing CNC Projects
GW Editor
GD&T Hall of Fame
Gearotic Calculators and
References GD&T Symbols Resources
MeshCAM
G-Code List Lean Manufacturing
Conversational CNC
Cost Estimating
Deals and Steals Software
CNC Dictionary