Professional Documents
Culture Documents
Coverings
A 26 gauge IT - 4 profile pre-coated iron sheet
roof coverings including fixing to steel Z- purlins with
and including hook bolts to the manufacturers
instructions. M2
B Gauge 26 pre-painted IT-4 ridge capping ditto M
C 22gauge purpose made galvanised steel fascia
size 485mm girth fixed to angle bearers and
purlins with bolts. M
D Construction
Framed steel work
The following in 11No. Steel trusses spanning
10.95m x 2.60m high hoisted to a height of 16.5m
above FFL.
E 50 x 50 x3mm USD rafters\Top chord Kg
F 50 x 50 x3mm USD struts\ties Kg
G 100 x 50 x4mm USD tie beam\bottom chord Kg
Unframed steel works
H Zp-40 purlins bolted including drilling holes Kg
I 50x50x3mm mild steel angle fascia bearers
welded to rafters Kg
J 50x50x3mm USD bracings Kg
K 12mm diameter sag rods welded to purlins Kg
ITEM DESCRIPTION UNIT
Sundries
A 500x230x10mm base plates with 2No. 18mm No.
diameter holes.
B 500x230x10mm Gusset plates with 2No. 18mm
diameter holes welded to rafters. No.
C 75x75x6mm angle cleats 175mm long with 2No.
14mm diameter holes welded to rafters and bolted
to Z-purlins including drilling holes in cleats
and purlins. No.
D 16mm diameter hold down bolt x 300mm long
including nuts and washers. No.
E 12mm diameter bolts x 150mm long complete
with nut and washer No.
Rain water goods
F 26 gauge galvanised rain water gutter 150mm wide
300 m deep internally including mild steel fixing
brackets M
G Extraover for 100mm diameter rain water outlet No
H Ditto for stopped ends No
I 100 mm diameter galvanised steel rain water
down pipe fixed to wall cladding with holderbats. M
J Extraover for water shoe No
K Ditto for swan neck off-set No
Painting
L Prepare and apply three coats of oil paint
on steel surfaces fascia M2
M Prepare and apply two coats of red oxide
primer to structural steel Kg