Professional Documents
Culture Documents
Peer to peer connections are the connections that are made between S7 CPUs in a system.
The frequency of peer to peer communication and the amount of signals to be exchanged
can be configured and optimized, if required.
In order to configure the peer to peer connections for an S7 CPU, proceed as follows:
1
2
4. Select the runtime container (rtc) to define the peer to peer connections for that rtc.
Then click on Edit to open the Edit Runtime Container – RTC dialog box.
3
5. With the Edit Runtime Container – RTC dialog box open, click on Edit at the right
side of the Peer-to-Peer Connections field. The Peer to Peer Connections RTC
dialog box will open.
4
6. The runtime containers that may be connected are listed in the Peer to Peer
Connections RTC dialog box. The following settings can be made for each runtime
container:
5
8. Check the peer to peer communication
Use the following steps to check the detail of the peer to peer communication including
the amount of programmed peer to peer communication links and the detail of the links:
6
Select the runtime container to check and push “Calculate”:
7
By right click on the “Preview Incoming” or “Preview Outgoing” cell, the detail of all
connections will be shown. The details can be export to the Excel spreadsheet for further
analysis.