Professional Documents
Culture Documents
The BDK Coiled Tubing Quick Release Joint offers a safe and efficient means of
OD Drift Dia.
connecting the bottom hole assembly.
1.750" 0.750"
The male and female sections simply stab together and a 90 degree turn locks the joint. 2.000" 0.750"
The Q.R.J. is designed to withstand load and torque compatable with each size of 2.125" 0.875"
Bottom Hole Assembly. 2.250" 0.875"
2.375" 1.000"
A simple release tool allows the joint to be disconnected.
2.500" 1.000"
The connection forms an integral part of each Coiled Tubing Tool and is also available in 2.875" 1.125"
the form of QRJ x Thread Crossover Adaptors.
3.125" 1.125"
The inter-locking system allows the tool to experience high level of 2.125" 7622 0.88" 17"
torque without any detrimental effect on the connector. 2.250" 5837 1.00" 17"
2.875" 8532 1.31" 18.2"
A Bleed-off Plug is incorporated in the lower section of the tool.
3.250" 11571 1.68" 19"
The BDK Grub Screw Connector is an outline connector to suit a specific size of Coiled Tubing.
For this type of connector to be used successfully the tubing must first be dimpled to the correct depth using the
Preparation Tool (Click to View).
The Tubing is retained within the Connector by a specially designed Grub Screw.
The BDK Grub Screw Connector is available for any combination of Coiled Tubing and Thread Size.
The BDK Compact Grapple Connector is designed and manufactured for a given size OD Assy No
of Coiled Tubing. 1.500" 12081
1.750" 11938
The advantage of this style of connector over the inline style is that it allows for an
unrestricted bore, offering a clear path for ball operated equipment. 2.000" 12082
2.375" 12083
2.875" 12084
3.500" 12085
The Stringent customer requirements led to the new BDK Heavy Duty Completion Grapple Connector being developed for
use with velocity strings.
Body Coiled Tubing Assembly
The connector utilises a modified buttress form helical feature rather
Diameter Diameter Number
than a conventional taper to close the grapple onto the Coiled Tubing.
2.750" 1.750" 11208
It is suitable for high tensile loads (70,000 lbf on test from a 2 3/8"
3.000" 2.000" 11214
Grapple with no slippage), and out-performs other style Grapple
Connectors, whilst being easy to make-up and use. 3.375" 2.375" 11079
3.875" 2.875" 11220
All BDK Outline Connectors are fitted with double Back-up Rings to
ensure good sealing capability. 4.500" 3.500" 11226
The BDK Grub Screw Connector Preparation & Removal Tool To Suit CT Size Assembly No
incorporates specially profiled screws for preparation of the Coiled
Tubing prior to assembly of the Grub Screw Connector. 1.250" 5764
1.500" 5769
The sliding hammer action has a dual releasing feature and can be 1.750" 5771
reversed for removal of the Grub Screw Connector. 2.000" 5773
2.375" 5775
2.875" 5777
3.500" 5779
B D KENDLE ENGINEERING LIMITED COILED TUBING PRODUCTS OUTLINE CONNECTORS ACCESSORIES PAGE 19
REV. 3
Tubing Circulariser Accessories
The BDK Hydraulically Operated Tubing Circulariser is used to reduce the ovality of the Coiled Tubing.
COILED TUBING
B D KENDLE ENGINEERING LIMITED COILED TUBING PRODUCTS OUTLINE CONNECTORS ACCESSORIES PAGE 20
REV. 3
Tubing Straightener Accessories
The BDK Hydraulically Operated Tubing Straightener is used to remove the residual bend of the Coiled Tubing to allow
unrestricted installation of the connector.
B D KENDLE ENGINEERING LIMITED COILED TUBING PRODUCTS OUTLINE CONNECTOR ACCESSORIES PAGE 21
REV. 3