Professional Documents
Culture Documents
Pantino 7
REVIEW INNOVATIONS REFRESHER MAY 2019
SITUATION 5 – A table is to be lifted by Rendon, Vertera, Policarpio, 411.4.1 Simplified calculation for Vc. Shear strength Vc shall be computed by
and Pantino positioned at points 1,2,3 and 4 respectively as provisions of Sections 411.4.1.1
shown in Fig. STM-10.5, without tilting.
Given: X = 2.0 m Y = 2.4 m through 411.4.1.3 unless a more detailed calculation is made in accordance with
13. Given: FR = 120 N FV = 90 N 411.4.2.
If the table is weighing 420 N, how much is the force FPA which
should be applied at a distance of 0.5m from the centroidal 411.4.1.1 For members subject to shear and flexure only,
y-axis?
A. 50 C. 120
B. 80 D. 140 (411‐3)
(411‐15)
Figure CCM-10.01 where A is the area of shear reinforcement within a distance s.
RC-02
Pantino 7