Professional Documents
Culture Documents
SERVICE MANUAL
AZ2-F Chassis
ORIGINAL MANUAL ISSUE DATE: 1/2011 Segment: P-1
9-888-394-01
Self Diagnosis
Supported model
SERVICE MANUAL
AZ2-F Chassis
Segment: P-1
KDL-32EX427
LCD Digital Color TV
9-888-394-01
MODEL LIST
MODEL COMMANDER DESTINATION MODEL COMMANDER DESTINATION
KDL-32EX427 RM-YD064 COLUMBIA KDL-40EX527 RM-YD064 COLUMBIA
KDL-32EX527 RM-YD064 COLUMBIA KDL-46EX527 RM-YD064 COLUMBIA
9-888-394-01
TABLE OF CONTENTS
Section 1 - Safety and Features.................................................1 Section 3 - Chassis Overview...................................................14
Warnings and Cautions...............................................................1 Overview...................................................................................14
Handling the FFC Connector....................................................... 3 Overall Circuit Descriptions....................................................... 16
Safety-Related Warnings............................................................. 4 Main Board................................................................................ 16
Safety Check-Out........................................................................5 Switch Unit................................................................................. 16
Self Diagnosis Function..............................................................7 Sensor Board............................................................................. 16
Overview.....................................................................................8 Power Supply Board.................................................................. 16
Features......................................................................................8 LED Board................................................................................. 16
Full HD 1080p Resolution............................................................ 8 LCD Panel Assembly................................................................. 16
Internet Streaming & Connectivity............................................... 8 Section 4 - Troubleshooting......................................................20
Faster Start-Up............................................................................ 9
Overview...................................................................................20
BRAVIA® Sync™ Compatible..................................................... 9
Updating the software................................................................ 20
X-Reality™ Engine...................................................................... 9
Triage Chart..............................................................................21
Navigation Made Easy................................................................. 9
Protection Shutdown.................................................................22
LightSensor™ Technology........................................................... 9
Standby LED Flash Count......................................................... 22
Edge LED Backlighting................................................................ 9
Diagnostic Code Descriptions...................................................24
Presence Sensor......................................................................... 9
Viewing the Self Check Diagnostic History................................ 25
USB Photos, Videos & Music...................................................... 9
Specifications............................................................................10 Section 5 - Flow Charts and Diagrams....................................26
Overview...................................................................................26
Section 2 - Software Requirements......................................... 11
Diagnosing the Error.................................................................. 26
Overview................................................................................... 11
No Power................................................................................... 27
Software Updates for Customers.............................................. 11
StandBy LED Blinking................................................................ 28
Software Updates for Servicers................................................12 No Picture.................................................................................. 34
Software Update Responsibility................................................. 12
No Sound................................................................................... 35
Checking the Software Version.................................................. 12
TV/Remote Commander Buttons Not Working.......................... 36
Examples of Software Correctable Symptoms.......................... 13
KDL-32EX427/32EX527/40EX527/46EX527 i
TABLE OF CONTENTS
Network Not Connecting............................................................ 38 Optional Adjustments................................................................53
Skype Accessory Not Working................................................... 40 Setting White Balance Adjustments........................................... 53
Resetting the TV to Factory Condition......................................54
Section 6 - Disassembly/Part Number Information................42
Resetting the TV to Factory Condition Using Service Mode...... 55
Table-Top Stand Assembly Removal........................................42
Rear Cover and AC Cover Removal.........................................43 Appendix A - Removing the Rear Cover................................ A-1
GE2A/GE3A (Power) Board, Switch Unit and Removing the Power Cord from the Rear Cover.................... A-1
Speaker Removal................................................................44 KDL-32EX427/32EX527 Only..................................................A-1
BATV (Main) Board, HLR2 Board and KDL-40EX527 Only..................................................................A-3
HMS3 Board Removal.........................................................45 KDL-46EX527 Only..................................................................A-4
Bezel, Panel Brackets and LCD Panel Removal......................46
Cleaning the LCD Panel............................................................ 46 Appendix B - Replacing the LCD Panel................................. B-1
Screw Legend...........................................................................47 Removing the LCD Panel from the Bezel............................... B-1
Connectors................................................................................47 Reattaching the LCD Panel onto the Bezel............................ B-2
Accessories and Packaging......................................................48 Appendix C - Setup Guide....................................................... C-1
Miscellaneous...........................................................................48
Remote Commander.................................................................48
Wire Dressing...........................................................................49
KDL-32EX427/32EX527/40EX527/46EX527 ii
SECTION 1 - SAFETY AND FEATURES
WARNINGS AND CAUTIONS
CAUTION
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other
than that contained in the operating instructions unless you are qualified to do so.
CARRYING THE TV
• Disconnect all cables when carrying the TV.
• Carry the TV with the adequate number of people; larger size TVs require two or more people.
• Correct hand placement while carrying the TV is very important for safety and to avoid damage.
WARNING!!
An isolation transformer should be used during any service to avoid possible shock hazard, because of live chassis. The chassis of this receiver is
directly connected to the AC power line.
! SAFETY-RELATED COMPONENT WARNING!!
Components identified by shading and ! mark on the exploded views are critical for safe operation.
Replace all components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. It is essential
that all critical parts be replaced only with the part number specified in this manual to prevent electric shock, fire, or other hazard.
Circuit adjustments that are critical for safe operation are identified in this manual.
Follow these procedures whenever critical components are replaced or improper operation is suspected.
NOTE: Do not modify the original design without obtaining written permission from the manufacturer or you will void the original parts and labor
guarantee.
KDL-32EX427/32EX527/40EX527/46EX527 1
SECTION 1 - SAFETY AND FEATURES
CAUTION
W Do Not use paper towels, any type of abrasive pad, rags, rubber or vinyl materials to clean the screen. Using these materials could easily
scratch the screen which may result in permanent damage.
W Do Not use any cleaning product containing alkaline/acid cleaner, scouring powder, or volatile solvent, such as alcohol, ammonia,
benzene, thinner or insecticide. Using any of these harsh cleaners may result in permanent damage to the screen.
W Do Not spray water or detergent directly onto the TV screen . If liquid drips into the bottom of the screen it may cause a failure.
KDL-32EX427/32EX527/40EX527/46EX527 2
SECTION 1 - SAFETY AND FEATURES
HANDLING THE FFC CONNECTOR
Use the
Press down tab to
insert
connector.
Use the
tab to
2 remove
connector.
Main Board
Main Board
CAUTION: The FFC connector can be inserted into the Main Board upside down.
Use caution when you connecting or removing the FFC connector. If it is inserted upside down, the pins on the FFC connector
Remove the connector by the reinforcement tab only. will short-circuit and damage the board.
KDL-32EX427/32EX527/40EX527/46EX527 3
SECTION 1 - SAFETY AND FEATURES
SAFETY-RELATED WARNINGS
KDL-32EX427/32EX527/40EX527/46EX527 4
SECTION 1 - SAFETY AND FEATURES
SAFETY CHECK-OUT
After correcting the original service problem, perform the following safety checks before releasing the set to the customer:
1. Check the area of your repair for unsoldered or poorly soldered connections. Check the entire board surface for solder
splashes and bridges.
2. Check the interboard wiring to ensure that no wires are “pinched” or touching high-wattage resistors.
3. Check that all control knobs, shields, covers, ground straps, and mounting hardware have been replaced. Be absolutely
certain that you have replaced all the insulators.
4. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out
to the customer and recommend their replacement.
5. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and
recommend their replacement.
6. Check the line cords for cracks and abrasion. Recommend the replacement of any such line cord to the customer.
7. Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage.
Check leakage as described below.
KDL-32EX427/32EX527/40EX527/46EX527 5
SECTION 1 - SAFETY AND FEATURES
AC
1. A commercial leakage tester, such as the Simpson 229 or RCA 0.15 µF Voltmeter
(0.75V)
WT-540A. Follow the manufacturers’ instructions to use these
instructions.
2. A battery-operated AC milliampmeter. The Data Precision 245 digital
multimeter is suitable for this job.
Earth Ground
3. Measuring the voltage drop across a resistor by means of a VOM
or battery-operated AC voltmeter. The “limit” indication is 0.75 V, so
analog meters must have an accurate low voltage scale.
Figure A. Using an AC voltmeter to check AC leakage.
4. The Simpson’s 250 and Sanwa SH-63TRD are examples of
passive VOMs that are suitable. Nearly all battery-operated digital
multimeters that have a 2 VAC range are suitable (see Figure A).
KDL-32EX427/32EX527/40EX527/46EX527 6
Self Diagnosis
Supported model SECTION 1 - SAFETY AND FEATURES
KDL-32EX427/32EX527/40EX527/46EX527 7
SECTION 1 - SAFETY AND FEATURES
OVERVIEW FEATURES
The AZ2-F chassis is one of several designs for the 2011 model line Several new features are introduced in this chassis model lineup
of Sony Bravia® LCD televisions. This manual covers the following along with some carryovers from the previous year.
models:
KDL32EX427 FULL HD 1080P RESOLUTION
KDL32EX527 Experience amazing Full HD 1080p picture quality, the highest at-
home resolution. Take full advantage of HD sources like a Blu-ray
KDL40EX527 Disc™ Player or PlayStation®3 gaming console via the 16:9 wide
screen panel (1920 x 1080).
KDL46EX527
KDL-32EX427/32EX527/40EX527/46EX527 8
SECTION 1 - SAFETY AND FEATURES
FASTER START-UP EDGE LED BACKLIGHTING
Quick Start & Viewing feature enables this Sony television to go from Experience the next level of picture quality and contrast with Sony’s
‘OFF’ to ‘ON’ 2-3 times faster than previous Sony televisions. Edge LED Backlight technology. This technology sharpens image
contrast giving an amazingly crisp picture you can see. The ultra-thin
BRAVIA® SYNC™ COMPATIBLE backlight system allows for a slimmer, sleeker design.
LIGHTSENSOR™ TECHNOLOGY
Enjoy customized picture brightness and save energy without lifting
a finger. The built-in Light Sensor automatically adjusts the picture
brightness based on the amount of light in the room.
KDL-32EX427/32EX527/40EX527/46EX527 9
SECTION 1 - SAFETY AND FEATURES
SPECIFICATIONS
Sistema Nombre del modelo KDL- 46EX527 40EX527 32EX527 32EX427
Sistema de TV Análogo:NTSC 3.58 Alimentación y otras especificaciones
Digital: DVB-T Requisitos de alimentación 110-240 V ca, 50/60 Hz
Cobertura de canales VHF: 2-13, UHF: 14-69 Consumo energético
CATV (Análogo): 1-135 103 W 102 W 77 W
en uso
Sistema del panel Panel LCD (pantalla de cristal líquido) en espera Menos de 0,25 W Menos de 0,3 W
Salida de bocinas 10 W + 10 W Tamaño de pantalla (cm) 80,1 80,0
Tomas de entrada/salida (medido diagonalmente)(pulgadas) 116,8 101,6 31,5 31,5
46 40
CABLE/ANTENNA Terminal externo de 75 ohms para entrada de señal de radiofrecuencia (32 clase) (32 clase)
(Cable/Antena) Resolución del monitor 1.366 puntos
VIDEO IN 1/2 VIDEO / AUDIO (horizontal) ×
1.920 puntos (horizontal) × 1.080 líneas (vertical)
(Entrada de video 1/2) 768 líneas
COMPONENT IN YPBPR (video componente) (vertical)
Formato de señal: 480i, 480p, 720p, 1080i, 1080p Bocina
30 × 150 (2) 30 × 100 (2)
AUDIO Gama completa (mm)
HDMI IN 1/2/3/4 HDMI: Video: 480i, 480p, 720p, 720/24p/30p, 1080i, 1080p, 1080/24p/30p (para los Dimensiones con soporte (mm) 1.078 × 690 ×260 943 × 604 × 254 755 × 498 × 225
(Entrada HDMI 1/2/3/4) HDMI: Audio: PCM lineal de dos canales 32, 44,1 y 48 kHz, 16, 20 y 24 bits, Dolby Digital sin soporte (mm) 1.078 × 660 ×42 943 × 588 × 45 755 × 482 × 42
Entrada de audio analógico (minitoma) (solo HDMI IN 4) patrón de orificios de
300 × 300 200 × 200
ARC (solo HDMI IN 1) montaje mural (mm)
AUDIO OUT (Salida de audio)/ 500 mV rms (típico) tamaño de tornillos de
M6 (longitud: consulte el diagrama de la Guía de configuración.)
Auriculares Minitoma estéreo montaje mural (mm)
DIGITAL AUDIO OUT Señal de audio óptica digital PCM/Dolby Digital Peso con soporte (kg) 17,8 13,8 9,9
(OPTICAL) sin soporte (kg) 14,2 11,2 7,7
PC IN (Entrada de PC) Subminiatura D de 15 contactos, RGB analógico Accesorios suministrados Consulte “Verificación de los accesorios”
PC/HDMI 4 AUDIO IN Minitoma estéreo Accesorios opcionales Cables de conexión
(Entrada de audio de PC/HDMI) Kit de correa de soporte
LAN Conector 10BASE-T/100BASE-TX (La velocidad de la conexión podría variar en función Soporte de montaje mural: SU-WL500
del entorno de red. No se garantizan la tasa de comunicación ni la calidad de comunicación Adaptador USB para LAN inalámbrica
10BASE-T/100BASE-TX para este TV.) Temperatura de funcionamiento 0 °C - 40 °C
USB/DLNA Consulte el i-Manual para el formato compatible.
• La disponibilidad de los accesorios opcionales dependerá de las existencias.
• El diseño y las especificaciones están sujetos a cambios sin previo aviso.
KDL-32EX427/32EX527/40EX527/46EX527 10
SECTION 2 - SOFTWARE REQUIREMENTS
OVERVIEW SOFTWARE UPDATES FOR CUSTOMERS
There are 2 reasons for updating the software on the TVs. The subject of software updates is a very important. The televisions
of today have advanced to the point where they are not simply a
●● Software updates for customers television anymore. They are evolving into devices that are designed
These updates are for enhancements or improvements that to integrate with numerous other devices found in the home. Some
have been made to the software after the TV was released. examples are: Portable audio and video devices, still cameras, home
computer networks and accessing the internet to name a few.
●● Software update for servicers
These updates are specifically for servicers to use during a Communications with these varying devices requires that the
service call. television be compatible with varying communications protocols.
Although standards are detailed for each of these protocols, the real
world dictates that occasional errors may occur that could prevent
devices from operating or communicating properly.
Keeping the software in the television up-to-date is a procedure that
is normally handled by the owner of the television. Most customers
who own computers and other digital devices are familiar with and are
accustomed to updating the software in their products. If a customer
contacts the Sony Customer Support Center and it is deemed to
be correctable with a software update, the issue is handled at the
customer level.
KDL-32EX427/32EX527/40EX527/46EX527 11
SECTION 2 - SOFTWARE REQUIREMENTS
SOFTWARE UPDATES FOR SERVICERS SOFTWARE UPDATE RESPONSIBILITY
Software updates are designed to be performed by the customer.
The models in this manual utilize a “generic” type main board. In
Warranty repairs in which the issue can be resolved by a software
the past, many different main boards needed to be stocked due to
update are not reimbursable. Most issues involving software
differences in software requirements. The software loaded on the
updates are handled by the customer service center and should not
board was specific to the model and its features along with the type
be directed to an authorized service center. It is the responsibility
of LCD panel installed during production.
of the servicer to prevent service calls for issues that involve
Replacement main boards are now stocked with basic software. software updates. Exceptions to this are certain cases whereby the
Once the replacement board is installed in the unit, the most current customer is unable or unwilling to perform the task. In this situation,
software needs to be installed using a USB thumb drive containing the servicer will be notified and receive the proper authorization for
the necessary software downloaded. reimbursement.
This new method of supplying main boards significantly reduces the It is the servicer’s responsibility, however, to make certain that any
complexity of replacing LCD panels and main boards. Information TV requiring a legitimate service is running the latest software
about the LCD panel is stored on the TCON circuits. This information version and to install it if necessary.
is automatically loaded onto the main board when the TV is powered
up. With the correct software version the main board and/or the
TCON or LCD panel can be replaced more efficiently.
CHECKING THE SOFTWARE VERSION
The easiest way to check the version of software that is currently on
In addition to software installation, service adjustment information
the TV is to access the Contact Sony screen by using the customer
may need to be modified or verified to complete the service of the
menu.
TV. Service adjustment information is covered in “Section 7 - Service
Adjustments” on page 50.
KDL-32EX427/32EX527/40EX527/46EX527 12
SECTION 2 - SOFTWARE REQUIREMENTS
EXAMPLES OF SOFTWARE CORRECTABLE
SYMPTOMS
Most symptoms that are correctable by software updates involve
communications issues with other devices or minor glitches in
the operation of a specific function. Below is a list of some of the
symptoms that may be corrected with a software update:
●● Loss of color
●● Internet connectivity
●● Internet connectivity
KDL-32EX427/32EX527/40EX527/46EX527 13
SECTION 3 - CHASSIS OVERVIEW
OVERVIEW
The primary circuits contained in the AZ2F chassis for the consists of a main circuit board (designated as the BATV board), power supply board
(GE2A for the 32”, GE3A for the 40” & 46”), the HMS3 board, Timing Control (TCON), and the LCD panel assembly. The remaining small boards
contain switches, sensors and LED’s
NOTE: For connector part number information, refer to “Connectors” on page 47. For Wire Dressing information, refer to “Wire Dressing” on page 49.
BATV
GE2A
SWITCH
UNIT
TCON
HLR2 HMS3
KDL-32EX427/32EX527/40EX527/46EX527 14
SECTION 3 - CHASSIS OVERVIEW
BATV
GE3A
SWITCH
UNIT TCON
HLR2 HMS3
BATV
GE3A
SWITCH
UNIT TCON
HLR2 HMS3
Figure 3-3. BOARD LAYOUT FOR KDL-46EX527
KDL-32EX427/32EX527/40EX527/46EX527 15
SECTION 3 - CHASSIS OVERVIEW
OVERALL CIRCUIT DESCRIPTIONS LCD PANEL ASSEMBLY
“Figure 3-4. Overall Block Diagram” on page 17 provides an overview The LCD Panel Assembly includes the LCD Panel, TCON Board,
of the AZ2-F chassis. Below is a briedf description of the boards and and LED Backlight system.
their functions.
The LCD Panel contains the actual liquid crystals, color filters, and
polarizers. The liquid crystals are manipulated by the applied voltage
MAIN BOARD to pass a specific amount of light - from the backlight- depending on
the level of voltage applied.
The circuits located on the BATV Board perform all Video and Audio
processing functions. It also contains all the microprocessor control The TCON performs all the control, timing, charge, and discharge
circuits. functions driving the operation of the LCD Panel.
A new LCD Panel assembly from parts will include the following
SWITCH UNIT items.
This board contains the power, channel and volume up/down and 1. LCD Panel
menu buttons. 2. LED Backlighting Components
3. TCON Board
SENSOR BOARD
The HMS3 board contains the motion sensor.
LED BOARD
The HLR2 board power, standby and timer LED’s are located on this
board along with the IR remote receiver and light sensor.
KDL-32EX427/32EX527/40EX527/46EX527 16
SECTION 3 - CHASSIS OVERVIEW
USB1 Ether
X’tal DiSEqC_Out MS USB2
H Con. TCON
27MHz
DDC
DiSEqC_In
27M
Silicon
P
[LNBH23]
X_SYSTEM1_RST
X_SYSTEM1_RST
IFAGC TS2
Cable
5V
5V
A
[HORUS3] [SEKITO2] I2CB
DDR3
DMD_CLK_ENABLE2 USB4 USB3 Current Current
N
SW Limit Limit –1333
5V
DMD_CLK_ENABLE1
DMD_RST BD Wifi [TPS2553DBV] [TPS2553DBV]
2Gb
Current
E
X’tal
Limit One –
4M
Silicon USB Ether DDR3 BACKLIGHT
Aerial
[MIC2005]
X_PEM_RST/LUT_SEL2/X_FRC_RST
IF2
LNA Tuner Ext Demod NAND
L
LUT_SEL1/X_TCON_RST/LR_FLAG
0
0
HUB PHY
IFAGC TS1 [GL850G] [RTL8201E] Muxed –1333
[ASCOT2Sip] IF1 [GAIA1a] I2CB 2Gb
Crystal 2Gb
X’tal 12M
PEM_WDT/XBUSY/BINT
MODE_PEM/TCON_RDY
X_SYSTEM1_RST 41M
SA_MODE/LUT_SEL0
TMDS1
HDMI1 DDC1
T_PANEL_SEL
DDC_5V_1
(ARC) HPD1
ARC
LVDS_ODD
LVDS_EVEN
I2C_C
CEC1 I2CA
TMDS2
DDC2 EQ SW
HDMI2 DDC_5V_2
HPD2 [Sil9287B] TS
CEC2 X’tal SYSTEM2_PWR SYSTEM1_PWR
TMDS3 41M
1.5V 1.2V
DDC3 IF1 REG_12V
DDC REG_12V DDC
HDMI3 DDC_5V_3
HPD3
X’tal SYSTEM2_PWR SYSTEM2_PWR T-CON_VCC
3.3->1
CEC3 48M Reset
Power
Push 3.3V REG12V
TMDS4 TMDS X’tal AC_MON DDC REG_12V DDC REG_12V
DDC4 DDC
32.76
8K 5V REG12V
HDMI4 DDC_5V_4
HPD4
CEC
Reset
SYSTEM2_PWR
AUDIO_12V
AUDIO_12V
[PST3629] 2.5V 3.3V 3.4V S1.2V S1.8V
CEC4 STBY 3.3V
LDO LDO LDO LDO LDO
GND
Power_Control
TCON-ON
DIMMER_DC
DIMMER
BACKLIGHT_ON
COMP_Y BACKLIGHT_MON
MAIN_PWR
AC_MON
I2CA (EQSW, Temp Sensor, Hotel Clock) PFC_PWR
VideoA_Det I2CB (Ext Demod)
DIMMER2
VIDEO_CV I2CC (Panel, RGB Sensor)
PEM_LOG
CVBS
Hotel TL-JIG
VIDEO_CV UARTA(LOG)
VIDEO1_LR UARTA (LOG) UARTD
Atreyu
UARTB (RF-Remote) MODE_PEM
UARTC (IR Blaster/ECS) Reset
UARTC(Hotel/ECS)
I2CA(Hotel_Clock)
/ECS
X_Hotel_PWR_CTRL SIRCS
COMP_Y
COMP_Pb Temp
COMP COMP_Y, Pb, Pr COMP_Pr
I2CA
Sensor
Temp Sensor
VideoB_Det [LM75B]
COMP2_LR PC_G
PC_B
Cr_Det PC_R SIRCS
PC_H
PC_V DIMMER
Sircs
DMD_CLK_ENABLE2
DIMMER_DC
Tuner_LR LOGO
VIDEO1_LR
PC_CON_Det DEBUG_LED2
PC PC_R,PC_G,PC_B,PC_H,PC_V
PC_LR COMP2_LR DEBUG_LED3
PC_5V, PC_DDC PC_LR PANEL_PWR Power_KEY
Line Out_LR
DMD_CLK_ENABLE1
DMD_RST
KEY
KEY
OPAMP X_WIFI_RST UARTE
[NJU72040V] HP_DET
HP/Line HP_/ Line Out Det
HP/Line Out LR TV_Out_LR SPDIF_SEL
Out Tuner_LR X_AUDIO_MON
HDMIEQ_INT
LUT_SEL0
LUT_SEL1
LUT_SEL2
PC_CON_DET
CR_DET
VIDEOB_DET
VIDEOA_DET
X_AUDIO_MUTE2
X_AUDIO_MUTE1
PFC_PWR
BACKLIGHT_ON
NMI
X_SYSTEM1_RST
REC_LED
POWER_LED
X_RF_RST
X_HOTEL_PWR_CTRL
DEBUG_LED1
POWER_KEY
PFC_MON
AC_MON
MAIN_SS_MON
SYSTEM2_PWR
SYSTEM1_PWR
MAIN_PWR
PIC_MUTE_LED
TIMER_LED
STBY_LED
BACKLIGHT_MON
PANEL_PWR_Det
PANEL_SEL
Human_Sensor_Det
Light_Sensor_Det
KEY
DC_MON
PIC_MUTE_LED
OPAMP
[NJU72011RB]
Audio
Main Main Speaker_Out_LR Power AMP
[D–510D]
SPEAKER X_FAULT AUDIO_MON
X_AUDIO_MUTE2 X_SYSTEM1_RST
X_AUDIO_MUTE1
Digital Video/TS/TMDS
Analog Video
Digital Audio
Analog Audio
PWM
Analog Signal
UART
I2C
SPI H/L
Panelless
KDL-32EX427/32EX527/40EX527/46EX527 17
SECTION 3 - CHASSIS OVERVIEW
(Only Interface between board and board)
Option
GND 21 NC 14 RXCLK-
BDR_ASU_12V 20 NC LED/IR/RGB Sensor/OPT_Sensor GND 2 31 18 WIFI GND GND 18 13 GND
GND 19 NC 2b- 3 LED_REC 3 29 19 WIFI USB_P PANEL_ODD2_P 19 12 RX2+
REG12V 18 2 3a- V LED_STBY 4 27 20 WIFI GND PANEL_ODD2_N 20 11 RX2-
GND 17 4 3a- 2 LED_TIMER 5 25 21 WIFI USB_N GND 21 10 GND
REG12V 16 3 P- 1 LED_POWER 6 28 22 WIFI GND PANEL_ODD1P 22 9 RX1+
GND 15 5 P- 2 LED_PIC_MUTE 7 30 23 WIFI VBUS PANEL_ODD1_N 23 8 RX1-
AU_12V 14 8 DEVICE_SDA/ GND 8 NC NC 24 HLR DEVICE_SCL GND 24 7 GND
DEVICE_SCL/ LED_BDR 9 NC 5 25 HLR LED_ON_TIMER PANEL_ODD0_P 25
B board
AU_GND 13 6 6 RX0+
AU_12V 12 9 OPT_SENS 10 32 12 26 HLR SIRCS PANEL_ODD0_N 26 5 RX0-
AU_GND 11 7 VD+3.3V 11 34 4 27 HLR LED_STBY GND 27 4 GND
STBY3.3V 10 10 SIRCS 12 26 6 28 HLR LED_POWER Panel_Ct rl11 / SDA 28 3 SDA
B board GND 9 1 1- 821- 139- 11 3 29 HLR LED_REC Panel_Ct rl12 / SCL 29 2 SCL
T-CON_ON 8 3 7 30 HLR LED_PIC_MUTE NC 30 1 NC (Aging pin)
AC_OFF_DET 7 9 2 31 HLR GND CN2000
BL_ERR 6 7 10 32 HLR OPT_SENS 1- 842- 088- 11
BL ON 5 6 1 33 HLR STBY_3.3V
DC_DIMMER
PFC_ON
4 4
RFRC module SYNC
RESET
1
2
15
16
11
2
34
35
HLR 3.3V
SW POWER_KEY
3 2
PWM_DIMMER 2 5 RFRC module GND 3 17 3 36 SW_KEY
POWER_ON 1 8 2b- 1/ 2b- 2/ 2b- 3/ 3a- 1/ 3a- 2/ P- 1 RX 4 13 1 37 SW GND
only J apan TX 5 14 2 38 HMS DET / SONY LOGO
To LS CN6701 (32" GE2A) VDD 6 12 3 39 HMS 5V / LOGO 5V
+OUT1 1 JAM SYT10-06-WL-ET 1 40 HMS GND/ LOGO GND
NON 2 1-821-146-11 CN9006
+OUT3 3 1- 818- 692- 21
1 (JST)
NON 4 HEADER ASSENBLY 40P
MOLEX L 4P
1-822-359-11
LS SPEAKER L+ (Fasten # 187) 1 1
To LS CN6702 (32" GE2A) Front L- (Fasten #110) 2 2
-OUT1 1 Lch 1 1 L+
NON 2 2 2 L-
-OUT3 3 2 3 R-
NON 4 1 4 R+
NC 5 SPEAKER R- (Fasten # 110) 2 3 Housing Speaker Connect or
Front R+ (Fasten # 187) 1 4
MOLEX L 5P Rch
1-822-360-11 1 1 STBY3.3V
2 2 RS232_RXD
Refer to Sheet [ Appendix SP Connector ] 3 3 RS232_TXD
AC_IN 4 4 SIRCS_OUT
5 5 SIRCS_IN
AC pigtail
AC-N 1 1
AC-L 2 2 6 6 GND
CN6001 CN9005
SFP79-02WLB JAM 6pin connector 182113311
TL- EX1JIG board
1-822-908-11
10 10 STBY_+3.3V
12 9 AUDIO+12.5V
14 8 AUDIO+12.5V
11 7 AUDIO+12.5V_GND
13 6 AUDIO+12.5V_GND GND 1
15 5 REG+12.5V_GND UARTD_TX 2
17 4 REG+12.5V_GND UARTD_RX 3
16 3 REG+12.5V RESET 4
18 2 REG+12.5V STBY_+3.3V 5
24 1 T- CON_VCC MODE_TVM 6
CN6001 UARTA_RX 7
1-842-569-11 NC (MD2) 8
HEADER ASSEMBLY FOR PWB 10P UARTC_RX 9
UARTC_TX 10
G-B Harness
7 9 AC_OFF_DET GND 11
G-B
1 8 POWERON UARTA_TX 12
R3 or RU board STBY3.3V
RS232_RXD
1
2
1
2
6
5
7
6
BL_ERR
BL_ON
ECS_MATRIX
STBY_+3.3V
13
14
RS232_TXD 3 3 2 5 DIMMER MODE_PEM 15
SIRCS_IN 4 4 4 4 HSYNC/ DIMMER_DC PEM_LOG_RX 16
SIRCS_OUT 5 5 8 3 TCON_ON PEM_LOG_TX 17
GND 6 6 3 2 PFC_PWR GND 18
CN101 9 1 GND CN9004
KDL-32EX427/32EX527/40EX527/46EX527 18
SECTION 3 - CHASSIS OVERVIEW
N C and N o H M S 3 B oard for the
(O nly Interface betw een board and board)
following Europe m odels only.
- KD L-32EX 520
B A T-V board T-con B oard(60H z)
H M S 3 board JA M 3pin S traight
- KD L-32EX 523
- KD L-40EX 520 To B A T
GN D 1 40 NC - KD L-40EX 523 6 1 B D U SB G N D P anel_C trl1 / N C 1 51 P anel_C trl1 / N C
- KD L-46EX 520
M otion S ensor M O T IO N _S E N S 2 38 NC 1 2 BD VBUS P anel_C trl2 / T C O N _R D Y 2 50 P anel_C trl2 / T C O N _R D Y
C N 6201(40",46" G E3)
3a-X /V /2 R E G +5V 3 39 NC 3 3 B D U S B _P P anel_C trl3 / N C 3 49 P anel_C trl3 / N C
C N 6704 (37"32" G E2A )
P -1/2 1-821-130-11 4 4 BD G ND P anel_C trl4 / LU T_S EL2 4 48 P anel_C trl4 / LU T_S EL2
S JM 20-28W LB
2 5 B D U S B _N P anel_C trl5 / LU T_S EL1 5 47 P anel_C trl5 / LU T_S EL1 P A N EL FFC
To B board (100106)
5 6 B D U S B S P D IF P anel_C trl6 / LU T_S EL0 6 46 P anel_C trl6 / LU T_S EL0 96pin
T-C O N _V cc12V 28 NC
7 B D E J E C T /B D R O N P anel_C trl7 / N C 7 45 P anel_C trl7 / N C
S W m odule
GND 27 NC
8 B D D IS C 1/B D R G P IO 1 P anel_C trl8 / P A N E L _S E L 8 44 P anel_C trl8 / P A N E L_S EL
T-con T-C O N _V C C 12V 26 NC
GN D 1 37 9 B D D IS C 2/U _D L _S T A T P anel_C trl9 / B IN T 9 43 P anel_C trl9 / B IN T
GND 25 NC
S W m odule P O W E R _IN T 2 35 10 B D U A R T T x/ B D R K E Y 1 P anel_C trl10 / N C 10 42 P anel_C trl10 / N C
T-C O N _V C C _12V To B 24 1
A LL K EY 1 3 36 NC 11 B D U A R T R x/ B D R K E Y 2 /H L R D E V IC E _S D A P anel_C trl11 / S D A 11 41 P anel_C trl11 / S D A
GND 23 NC
1-822-693-11 12 B D R S T B Y _+3.3V P anel_C trl12 / S C L 12 40 P anel_C trl12 / S C L
BD R _A S U_12V 22 NC
13 B D R U A R T _T x/ R F U A R T _T X GND 13 LV D S -FF C 39 GND
O ption
GND 21 NC B V - H H arness
H -B 14 B D R U A R T _R x/ R F _U A R T _R X P A N E L _E V E N 4_P 14 B -PE L3 38 P A N E L _E V E N 4_P
BD R _A S U_12V 20 NC
15 B D R W A K E U P _S T B Y _M IC O N /R F S E L P A N E L _E V E N 4_N 15 37 P A N E L _E V E N 4_N
GND 19 NC
H LR 2board
board
16 B D R G P IO 0/ R F _R S T P A N E L _E V E N 3_P 16 36 P A N E L _E V E N 3_P
R EG1 2V 18 2
S TB Y+3.3V 1 33 17 BDR G ND P A N E L _E V E N 3_N 17 35 P A N E L _E V E N 3_N
GND 17 4
LED /IR /R G B S ensor/O P T_S ensor GN D 2 31 5 18 W IF I G N D GND 18 34 GND
R EG1 2V 16 3
2b-3 L E D _R E C 3 29 3 19 W IF I U S B _P P A N E L _E V E N _C L K _P 19 33 P A N E L _E V E N _C L K _P
GND 15 5
3a-V L E D _S T B Y 4 27 1 20 W IF I G N D P A N E L _E V E N _C L K _N 20 32 P A N E L _E V E N _C L K _N
A U _12V 14 8
3a-2 L E D _T IM E R 5 25 4 21 W IF I U S B _N GND 21 31 GND
51pin FF C
B board
A U _GND 13 6
P -1 L E D _P O W E R 6 28 NC 22 W IF I G N D P A N E L _E V E N 2_P 22 30 P A N E L _E V E N 2_P
A U _12V 12 9
P -2 L E D _P IC _M U T E 7 30 2 23 W IF I V B U S P A N E L _E V E N 2_N 23 29 P A N E L _E V E N 2_N
A U _GN D 11 7
D E V IC E _S D A /G N D 8 NC NC 24 H L R D E V IC E _S C L P A N E L _E V E N 1P 24 28 P A N E L _E V E N 1P
B board
S TB Y3.3V 10 10
D E V IC E _S C L /L E D _B D R 9 NC 5 25 H L R L E D _O N _T IM E R P A N E L _E V E N 1_N 25 27 P A N E L _EV EN 1_N
GND 9 1
O P T _S E N S 10 32 12 26 H L R S IR C S P A N E L _E V E N 0_P 26 26 P A N E L _E V E N 0_P
T-C O N _O N 8 3
V D +3.3V 11 34 4 27 H L R L E D _S T B Y P A N E L _E V E N 0_N 27 25 P A N E L _E V E N 0_N
A C _O FF_D ET 7 9
S IR C S 12 26 6 28 H L R L E D _P O W E R GND 28 24 GND
B L_ER R 6 7
1-821-139-11 3 29 H L R L E D _R E C P A N E L _O D D 4_P 29 23 P A N E L _O D D 4_P
B L ON 5 6
7 30 H L R L E D _P IC _M U T E P A N E L _O D D 4_N 30 22 P A N E L _O D D 4_N
D C _D IMM ER 4 4
2 31 H LR G N D P A N E L _O D D 3_P 31 21 P A N E L _O D D 3_P
P FC _O N 3 2
10 32 H L R O P T _S E N S P A N E L _O D D 3_N 32 20 P A N E L _O D D 3_N
P W M _D IMM ER 2 5
W ifim odule 1 33 H L R S T B Y _3.3V GND 33 19 GND
(U S 32”,40”& 46”O nly)
P O W ER _O N 1 8
11 34 H L R 3.3V P A N E L _O D D _C L K _P 34 18 P A N E L _O D D _C L K _P
2 35 S W P O W E R _K E Y P A N E L _O D D _C L K _N 35 17 P A N E L _O D D _C L K _N
To LS
GN D 1 20 3 36 S W _K E Y GND 36 16 GND
C N 6601(40",46" G E3) +O U T1 1
W IFI V C C 2 23 1 37 SW G N D P A N E L _O D D 2_P 37 15 P A N E L _O D D 2_P
C N 6701 (37"32" G E2A ) NO N 2 N C for the foll
ow ing Europe m odels only.
W IF I U S B _P 3 19 NC 2 38 H M S D E T /S O N Y L O G O P A N E L _O D D 2_N 38 14 P A N E L _O D D 2_N
+O U T3 3 - KD L-32EX 520
W IF I U S B _M 4 21 - KD L-32EX 523 NC 3 39 H M S 5V /L O G O 5V P A N E L _O D D 1P 39 13 P A N E L _O D D 1P
NO N 4
W IF I G N D 5 18 - KD L-40EX 520 NC 1 40 H M S G N D / LO G O G N D P A N E L _O D D 1_N 40 12 P A N E L _O D D 1_N
M O LEX L 4P - KD L-40EX 523
S M 05B -G H S -TB C N 9006 P A N E L _O D D 0_P 41 11 P A N E L _O D D 0_P
1-822-359-11 - KD L-46EX 520
LS
1-819-334-11 1-818-692-21 (JS T ) P A N E L _O D D 0_N 42 10 P A N E L _O D D 0_N
H E A D E R A S S E N B L Y 40P GND 43 9 GND
GND 44 8 GND
To LS
P anel_C trl13 45 7 P anel_C trl13
C N 6602(40",46" G E3) -O U T1 1
GND 46 6 GND
C N 6702 (37"32" G E2A ) NO N 2
S P EA KER L+ (Fasten # 187) 1 1 P A N E L _V C C _S W 47 5 P A N E L _V C C _S W
-O U T3 3
Front L- (Fasten #110) 2 2 P A N E L _V C C _S W 48 4 P A N E L _V C C _S W
NO N
NC
4
5
Lch 1 1 L+ P A N E L _V C C _S W 49 3 P A N E L _V C C _S W
2 2 L- P A N E L _V C C _S W 50 2 P A N E L _V C C _S W
2 3 R- P A N E L _V C C _S W 51 1 P A N E L _V C C _S W
M O LEX L 5P
1 4 R+ C N 2001
1-822-360-11
S P EA KER R - (Fasten # 110) 2 3 H ousing S peaker C onnector 1-842-548-11
Front R + (Fasten # 187) 1 4 FFC D irect in C onnector
A C _IN
R ch Yam aichi
1 1 S TB Y3.3V
A C pigtail
A C -N 1 1
10 10 S TB Y_+3.3V
12 9 A U D IO +12.5V
14 8 A U D IO +12.5V
11 7 A U D IO +12.5V _GND
13 6 A U D IO +12.5V _G N D GND 1
15 5 R E G +12.5V _G N D U A R T D _T X 2
17 4 R E G +12.5V _G N D U A R T D _R X 3
16 3 R E G +12.5V R ES ET 4
18 2 R E G +12.5V S T B Y _+3.3V 5
24 1 T -C O N _V C C M O D E _T V M 6
C N 6001 U A R TA _R X 7
G -B H arness
1-842-569-11 N C (M D 2) 8
G -B
R 3 or R U board
H EA D ER A S S EM B LY FO R P W B 10P U A R TC _R X 9
S TB Y3.3V 1 1
U A R TC _TX 10
R S 232_R X D 2 2
7 9 A C _O F F _D E T GND 11
R S 232_TX D 3 3
1 8 P O W ER O N U A R T A _T X 12
S IR C S _IN 4 4
6 7 B L _E R R E C S _M A T R IX 13
S IR C S _O U T 5 5
5 6 B L_O N S TB Y_+3.3V 14
GN D 6 6
2 5 D IM M E R M O D E _P E M 15
C N 101
4 4 H S Y N C /D IM M E R _D C P E M _L O G _R X 16
182018311
8 3 T C O N _O N P E M _L O G _T X 17
3 2 P F C _P W R GND 18
9 1 GND C N 9004
C N 6002 1-774-667-51
1-819-452-11 T L-EX 1 C onnector,FFC /FP C 18P [P-1 BAT-V 32/37/40/46]
KDL-32EX427/32EX527/40EX527/46EX527 19
SECTION 4 - TROUBLESHOOTING Self Diagnosis
Supported model
OVERVIEW
This chapter provides information regardng the Self Diagnosis
feature in our TVs.
KDL-32EX427/32EX527/40EX527/46EX527 20
SECTION 4 - TROUBLESHOOTING
TRIAGE CHART
Use the Triage Chart to determine what may possibly be causing the error before going out to the customers location.
G* BOARD ▲ ▲ ▲
HLR2 BOARD ▲
SPEAKER ▲
SKYPE MODULE
LVDS CABLE ▲ ▲ ▲
TCON
LCD Panel ▲
KDL-32EX427/32EX527/40EX527/46EX527 21
SECTION 4 - TROUBLESHOOTING
PROTECTION SHUTDOWN STANDBY LED FLASH COUNT
Self Diagnosis
Supported model
0.5
0.5
3
KDL-32EX427/32EX527/40EX527/46EX527 22
SECTION 4 - TROUBLESHOOTING
2X Blink - Main Power Error 6X Blink - Backlight System Failure
A loss of REG12V from the power supply triggers this protect If the inverter circuits fails to generate high voltage or one or more
event. This symptom is usually remedied by replacing the power of the backlight lamps fails to light, the television will shut down
supply board. If the error continues after the power supply board and display this diagnostics error. Observing for the presence of
is replaced, suspect excessive loading which is causing the power backlighting is crucial in determining which component is likely at
supply to shut down. This is usually caused by a failure of the inverter fault.
circuits. Unplug the inverter and turn the TV back on. If a 6X error is
displayed, the inverter (or LCD panel) must be replaced. If the backlights turn on before the 6X shutdown occurs, it is safe
to assume that the inverter circuits are functioning and one of the
3X Blink- DC Regulator/Audio Error lamps failed to ignite. Replacing the LCD panel is necessary. If the
backlights never turn on before the 6X shutdown, the inverter has
The first thing to check when a 3X blink protection mode occurs is failed. If the inverter is available for replacement, replace the inverter.
the physical condition of the speakers and speaker connections. The If the inverter is not available, replace the LCD Panel.
speakers should measure 8 ohms. Shorted speakers or connections
can cause a 3X blink protection mode. 7X Blink - Temperature Failure
If the speakers and connections check okay, then the defective A digital thermometer IC located on the main board provides a
component is on the main board. Either an open F4200, defective temperature reading of the chassis and LCD panel. If the temperature
DC Regulator, or defective Audio amplifier will cause a 3X blink exceeds a pre-determined point the TV will shut down. If this problem
protection mode which would require replacing the main board. occurs immediately at turn-on, the temperature sensing IC has failed
and replacing the main board is required. If this occurs after the TV
A defect on the Power Supply Board may also cause a 3X blink has been running for a while, check for ventilation issues that could
protection mode and shut-off. Check the AU12V level at CN6704/pin cause the TV to run hotter than normal.
14. If 0V is measure before shut-off the power supply board needs
to be replaced.
5X Blink - TCON Error
A communications error with the timing control circuits (TCON) has
occurred. If the TCON is available for replacement, replace the
TCON. If the TCON is not available, the LCD panel must be replaced
since the TCON circuit is part of the LCD panel assembly. In rare
cases a loose or defective LVDS cable could also be the cause.
KDL-32EX427/32EX527/40EX527/46EX527 23
SECTION 4 - TROUBLESHOOTING
DIAGNOSTIC CODE DESCRIPTIONS
The Diagnotic Table provides an overview of the number of times the Standby LED blinks and the possible location. To access the Triage
documents for the models listed in this manual, login into the Sony Authorized Servicer Portal at www.sony.com/asp.
KDL-32EX427/32EX527/40EX527/46EX527 24
SECTION 4 - TROUBLESHOOTING
VIEWING THE SELF CHECK DIAGNOSTIC HISTORY CLEARING THE SELF CHECK DIAGNOSTIC LIST
It is possible to bring up past occurrences of a failure for confirmation Since the diagnostic results displayed on the screen are not
on the Self Check diagnostic history screen. This feature is useful for automatically cleared, always check the self-diagnostic screen after
failures which are intermittent or when the customer is not sure what you have completed the repairs to be sure you have cleared the
is causing the television to shut down. result display to “0”.
1. TV must be in standby mode. (Power off). 1. To clear the Error history and Error count
2. Press the following buttons on the Remote Commander press 8 0 .
within a second of each other:
RESETTING THE LCD PANEL OPERATING HOURS
3. DISPLAY Channel 5 Volume -
POWER . The 3 sets of numbers displayed on the lower left corner of the screen
indicates the total accumulated operating hours of the television and
* NOTE: This differs from accessing Service Adjustments Mode the operating hours of the LCD panel. Total operating hours is on the
(Volume +) left, boot count in the center and panel hours in the right group (The
StandBy LED Flash Count center numbers are not used.)
Diagnostic Item
1. To clear the LCD Panel operating hours of the LCD
SELF CHECK Panel after replacing the panel, press 7 0 .
000 RGB_SEN -------------- -------------- -------------- 00
000 RESERVED
000 RESERVED
--------------
--------------
-------------- -------------- 00
-------------- -------------- 00
EXITING THE SELF CHECK DIAGNOSTIC SCREEN
002 MAIN_POWE Error Count
003 DC_ALERT
--------------
--------------
--------------
--------------
--------------
--------------
01
00 (00-99) 1. To exit the Self Diagnostic screen, turn off the power to
003 AUD_PROT
004 BALANCER
--------------
--------------
--------------
--------------
--------------
--------------
00
00 the TV by pressing the POWER button on the remote
005 HFR_ERR
005 TCON_ERR
--------------
--------------
--------------
--------------
--------------
--------------
00
00 or the POWER button on the TV.
005 P_ID_ERR -------------- -------------- -------------- 00
006 BACKLITE -------------- -------------- -------------- 00
006 VLED -------------- -------------- -------------- 00
007 TEMP_ERR -------------- -------------- -------------- 00
007 FAN_ERR -------------- -------------- -------------- 00
010 EMITTER -------------- -------------- -------------- 00
012 IA -------------- -------------- -------------- 00
101 VPC_WDT -------------- -------------- -------------- 00
102 MEPS_WDT -------------- -------------- -------------- 00
103 HOST_WDT -------------- -------------- -------------- 00
104 STBY_WDT -------------- -------------- -------------- 00
12345-00333-06789
- -
KDL-32EX427/32EX527/40EX527/46EX527 25
SECTION 5 - FLOW CHARTS AND DIAGRAMS
OVERVIEW
The following flow charts provide information to determine what repair parts to order based on the TV error.
START
Yes
Do the buttons
No See
on the TV & Remote
TV/Remote Commander
Commander work
Buttons Not Working
properly?
Yes
KDL-32EX427/32EX527/40EX527/46EX527 26
SECTION 5 - FLOW CHARTS AND DIAGRAMS
NO POWER
No Power
NG NG
Check STBY 3.3V Replace Harness
at 10 pin of CN6001 Between G* Board and G* Board
on the B* Board B* Board
OK OK
B* Board Harness
KDL-32EX427/32EX527/40EX527/46EX527 27
SECTION 5 - FLOW CHARTS AND DIAGRAMS
STANDBY LED BLINKING
2X Blink
Check REG12V at
Replace Harness
pins 2/3 of 12V NG NG
between G* Board and G* Board
CN6001 on
B* Board
the B* Board
12V OK OK
B* Board Harness
KDL-32EX427/32EX527/40EX527/46EX527 28
SECTION 5 - FLOW CHARTS AND DIAGRAMS
AUDIO
3 X Blink
Check AUDIO+12.5V NG
DC_ALERT
at pin 8/9 of
G* Board
CN6001 on
NG the B* Board
Check D+1.2V at
F6001,IC6005,etc
JL6007
(B* Board) OK
on the B* Board
OK NG
Check +12.5V
F4601,IC4601,etc
at F4601 on
(B* Board)
the B* Board
Check +3.3V_MAIN NG
F6003,IC6003,etc
at JL9234 on
(B* Board) OK
the B* Board
OK
AUDIO
FE/BE Communication
IC4601,etc
NG (B* Board)
Check
Speaker
Speaker Connector
OK
KDL-32EX427/32EX527/40EX527/46EX527 29
SECTION 5 - FLOW CHARTS AND DIAGRAMS
5X Blink
Check
LCD PANEL_VCC 12V NG NG
LCD PANEL (T-con)
at pin 1 of G* Board B* Board
change
CN6001 on
on the B* Board
12V OK Symptom
improvement
NG
Symptom
improvement
Replace
LVDS Connector
the LVDS Connector
NG
KDL-32EX427/32EX527/40EX527/46EX527 30
SECTION 5 - FLOW CHARTS AND DIAGRAMS
6X Blink
Over 2.65V
Symptom
improvement
Change G* Board G* board
NG
LCD PANEL
KDL-32EX427/32EX527/40EX527/46EX527 31
SECTION 5 - FLOW CHARTS AND DIAGRAMS
7X Blink
Setting NO
is OK?
Set to another
Check Temperature
Location, etc.
and
Ventilation.
YES
OK
B* Board
KDL-32EX427/32EX527/40EX527/46EX527 32
SECTION 5 - FLOW CHARTS AND DIAGRAMS
POWER LED
(Green) blinking
OK
NG
Check LCD PANEL LCD PANEL
OK
NG
Check G* Board G* Board
OK
B* Board
KDL-32EX427/32EX527/40EX527/46EX527 33
SECTION 5 - FLOW CHARTS AND DIAGRAMS
NO PICTURE
No Picture
NO 12V OK BL_ON:H NG
LCD PANEL_VCC Check
Press HOME Key Replace LCD PANEL
At JL6004 on the BL_ON at JL6018
XMB (Menu) displayed? the LVDS Harness (TCON)
B* Board on the B* Board
NG Harness
Replace Harness
(G* Board to Harness
B* Board G* Board between G* Board
B* Board) (LVDS)
to B* Board
OK
NG
Change B* Board G* Board
OK
B* Board
KDL-32EX427/32EX527/40EX527/46EX527 34
SECTION 5 - FLOW CHARTS AND DIAGRAMS
NO SOUND
No Sound
“TV Speakers”
NG OK
Check the Speaker Replace
B* Board
Harness the B* Board
OK NG
KDL-32EX427/32EX527/40EX527/46EX527 35
SECTION 5 - FLOW CHARTS AND DIAGRAMS
TV/REMOTE COMMANDER BUTTONS NOT WORKING
TV POWER
Button
not working
NG NG
Harness B* Board
KDL-32EX427/32EX527/40EX527/46EX527 36
SECTION 5 - FLOW CHARTS AND DIAGRAMS
Remote Commander
Buttons not working
NG NG
NG
OK
Exchange the Harness Harness
NG
OK
Exchange the
HLR Board
HLR Board
NG
B* Board
KDL-32EX427/32EX527/40EX527/46EX527 37
SECTION 5 - FLOW CHARTS AND DIAGRAMS
NETWORK NOT CONNECTING
Wired Network
on the TV
NG NG
Check
Check Ethernet Cable Ethernet Cable
Cable Connection
OK OK
B* Board
Auto
Check NG Wired Set-up
Check Local router DHCP server
Local Access IP address setting
Manual
OK
Check IP address
and Local router setting
NG
Check
Proxy setting
Internet Access
KDL-32EX427/32EX527/40EX527/46EX527 38
SECTION 5 - FLOW CHARTS AND DIAGRAMS
Wireless Network
on the TV
Error Message
displays when the YES
USB Dongle
Wireless Network
is selected?
NO
NO
B* Board
KDL-32EX427/32EX527/40EX527/46EX527 39
SECTION 5 - FLOW CHARTS AND DIAGRAMS
SKYPE ACCESSORY NOT WORKING
Skype accessory
not working
No
USB plugged in? Insert USB
Yes
No Insert another
-Unplug another NG Connect to NG NG
Able to run Skype unit
USB device a different B* board
Skype App? or
-AC OFF/ON USB port
USB dongle
Yes OK OK OK
No
Network connected? Reset network
Yes
Next page
KDL-32EX427/32EX527/40EX527/46EX527 40
SECTION 5 - FLOW CHARTS AND DIAGRAMS
Previous page
Audio
Far end Yes Yes Sound quality? problem Call Skype NG Move unit away
Auto-Focus work?
Video/Audio quality? No video? sound test from speaker
No No Video problem OK NG
Network speed
Enough
or Far end setting/system Skype unit
network speed?
far end system issue
Yes
No
Manual Focus work? Skype unit
Yes
KDL-32EX427/32EX527/40EX527/46EX527 41
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
TABLE-TOP STAND ASSEMBLY REMOVAL Components not identified by a part number or The component parts of an assembly are indicated by the * Items marked with an asterisk are not stocked since
description are not stocked because they are seldom reference numbers in the far right column of the parts list they are seldom required for routine service. Expect
A Remove 3 screws from Table-Top Stand Assembly required for routine service. and within the dotted lines of the diagram. some delay when ordering these components.
NOTE: The components identified by shading NOTE: The components identified by a red outline and a mark contain
and ! mark are critical for safety. Replace only confidential information. Specific instructions must be adhered to whenever
with part number specified. these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
2
4
3
A
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
KDL-32EX427/32EX527/40EX527/46EX527 42
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
REAR COVER AND AC COVER REMOVAL and ! mark are critical for safety. Replace only
with part number specified. these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
CAUTION: Do not damage the G2AS/G2BS Board Connector and Power Supply Cord when
removing the Rear Cover. Refer to “Removing the Power Cord from the Rear Cover” on page A-1 for
complete instructions.
C
B
E
D
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
F G 51 4-275-430-42 REAR COVER(32) 52 4-266-269-01 COVER, AC(M)
(KDL-32EX427/32EX527 ONLY)
51 4-275-420-42 REAR COVER(40) 4-256-393-01 SCREW, +PSW M3X6 W12
(KDL-40EX527 ONLY) 7-685-648-79 SCREW +BVTP 3X12 TYPE2 IT-3
51 4-275-413-22 REAR COVER(46) 2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3
(KDL-46EX527 ONLY) 4-257-907-01 JOINT, STAND
4-268-126-02 SCREW, ORNAMENTAL M6X12
KDL-32EX427/32EX527/40EX527/46EX527 43
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading NOTE: The components identified by a red outline and a mark contain
and ! mark are critical for safety. Replace only confidential information. Specific instructions must be adhered to whenever
with part number specified. these components are repaired and/or replaced.
GE2A/GE3A (POWER) BOARD, SWITCH UNIT AND SPEAKER REMOVAL See Appendix A: Encryption Key Components in the back of this manual.
102
A 103
I
104 104
J
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
E G 101 1-474-277-12 GE2A BOARD, COMPLETE 105 4-265-832-02 BRACKET SIDE (BAT-V32)
F H
(KDL-32EX427/32EX527 ONLY) (KDL-32EX427/32EX527 ONLY)
101 1-474-287-11 GE3A BOARD, COMPLETE 105 4-265-828-01 BRACKET SIDE (BAT-V MOLD)
(KDL-40EX527/46EX527 ONLY) (KDL-40EX527/46EX527 ONLY)
102 1-489-443-11 SWITCH UNIT 106 4-258-701-01 LABEL (BAT-V MOLD SIDE)
! 103 1-838-797-11 POWER-SUPPLY CORD (WITH CONN.) (KDL-32EX427/32EX527 ONLY)
106 4-256-435-11 LABEL, SHEET (BAT-V MOLD SIDE)
104 1-858-590-12 LOUDSPEAKER (KDL-40EX527/46EX527 ONLY)
(KDL-32EX427/32EX527 ONLY)
104 1-858-592-11 LOUDSPEAKER 2-990-421-41 SCREW (+PSW) (M3X6)
(KDL-40EX527/46EX527 ONLY)
KDL-32EX427/32EX527/40EX527/46EX527 44
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
BATV (MAIN) BOARD, HLR2 BOARD AND HMS3 BOARD REMOVAL and ! mark are critical for safety. Replace only
with part number specified. these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
Note: When replacing the LCD Panel, Insulation Sheet (G10) and Insulation Sheet (G4) are not
included with the LCD Panel and must be reattached to the replacement LCD Panel.
155
154
B A
Detail
153 Detail
F
E
D
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
151 A-1816-699-B BATV BOARD, COMPLETE 152 4-268-446-01 SHEET, INSULATION (G10)
(KDL-32EX427 ONLY) (KDL-32EX427/32EX527 ONLY)
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL, YOU ORDER THIS PART WHEN REPLACING THE LCD PANEL.
MUST UPDATE THE SOFTWARE TO THE LATEST VERSION. 152 4-268-443-01 SHEET, INSULATION (G4)
G Detail 151 A-1816-685-B BATV BOARD, COMPLETE (KDL-40EX527/46EX527 ONLY)
(KDL-32EX527/40EX527/46EX527 ONLY) ORDER THIS PART WHEN REPLACING THE LCD PANEL.
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL, YOU 153 A-1792-877-A HLR2 BOARD, MOUNTED
MUST UPDATE THE SOFTWARE TO THE LATEST VERSION. 154 A-1792-511-A HMS3 BOARD, MOUNTED
* 155 1-856-184-11 FRENEL LENS
KDL-32EX427/32EX527/40EX527/46EX527 45
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading NOTE: The components identified by a red outline and a mark contain
BEZEL, PANEL BRACKETS AND LCD PANEL REMOVAL and ! mark are critical for safety. Replace only confidential information. Specific instructions must be adhered to whenever
with part number specified. these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
NOTE: The LCD Panel is securely attached to the Bezel using double-sided tape.
(Refer to “Appendix B - Replacing the LCD Panel” on page B-1) for complete instructions.
A Lift up 2 Panel Bracket (H) from top side to detach from Bezel
B Lift up Panel Bracket (C) from right and left side to detach from Bezel
3 from KDL-32EX427/32EX527 Only
4 from KDL-40EX527 Only 204
6 from KDL-46EX527 Only
C Gently lift-up LCD Panel to detach from Bezel
203 203
A
B B 202
201
C
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
CLEANING THE LCD PANEL 201 4-266-722-01 BEZEL(32 SYR) 202 NA LCD PANEL
(KDL-32EX427/32EX527 ONLY) FOR ALL LCD PANEL AND TCON PART NUMBER INFORMATION
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
201 4-266-702-01 BEZEL(40 SYR) REFER TO THE LCD PANELS SERVICE MANUAL
Clean the cabinet of the TV with a dry soft cloth. (KDL-40EX527 ONLY) 203 4-266-012-01 BRACKET, PANEL (C)
Wipe the LCD screen gently with a soft cloth. 201 4-266-698-01 BEZEL(46 SYR) 204 4-266-016-01 BRACKET, PANEL (H)
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water. (KDL-46EX527 ONLY)
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
KDL-32EX427/32EX527/40EX527/46EX527 46
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading NOTE: The components identified by a red outline and a mark contain
SCREW LEGEND and ! mark are critical for safety. Replace only confidential information. Specific instructions must be adhered to whenever
with part number specified. these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
KDL-32EX427/32EX527
CONNECTORS
▲ 2-580-608-01 SCREW, +PSW M5X16 TABLE-TOP STAND(3) 3
△ 4-256-393-01 SCREW, +PSW M3X6 W12 RC(5), AC COVER(1) 6
■ 7-685-648-79 SCREW, +BVTP 3X12 TYPE2 IT-3 RC to TERMINAL AREA(1) 1
□ 2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3 RC(7) 7
251
◆ 4-257-907-01 JOINT, STAND RC(2) 2
◇ 4-268-126-02 SCREW, ORNAMENTAL M6X12 RC(2) 2
● 2-990-421-41 SCREW (+PSW) (M3X6) BATV(5), GE2A(5) 10
○ 7-685-646-79 SCREW, +BVTP 3X8 TYPE2 IT-3 HMS3(1) 1
▼ 4-167-964-01 SCREW, +PWTP 24X16 NOT IN THIS MODEL 0
KDL-40EX527
252
P/N DESCRIPTION REMARKS TOTAL
▲ 2-580-608-01 SCREW, +PSW M5X16 TABLE-TOP STAND(3) 3
△ 4-256-393-01 SCREW, +PSW M3X6 W12 RC(4), AC COVER(1) 5
■ 7-685-648-79 SCREW, +BVTP 3X12 TYPE2 IT-3 RC to TERMINAL AREA(1) 1
□ 2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3 RC(7) 7
◆ 4-257-907-01 JOINT, STAND RC(2) 2 253
◇ 4-268-126-02 SCREW, ORNAMENTAL M6X12 RC(2) 2
● 2-990-421-41 SCREW (+PSW) (M3X6) BATV(5), GE3A(5) 10
○ 7-685-646-79 SCREW, +BVTP 3X8 TYPE2 IT-3 HMS3(1) 1
▼ 4-167-964-01 SCREW, +PWTP 24X16 NOT IN THIS MODEL 0
KDL-46EX527
KDL-32EX427/32EX527/40EX527/46EX527 47
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
MISCELLANEOUS
X-2560-379-1 BAG, SCREW ASSEMBLY (L)
(KDL-46EX527 ONLY)
4-262-708-01 CLAMPER, CABLE
4-272-200-01 DOUBLE SIDED TAPE (PANEL)
4-188-302-11 HEX WRENCH
(KDL-46EX527 ONLY)
KDL-32EX427/32EX527/40EX527/46EX527 48
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
WIRE DRESSING
KDL-32EX427/32EX527/40EX527/46EX527 49
SECTION 7 - SERVICE ADJUSTMENTS
OVERVIEW ACCESSING SERVICE ADJUSTMENT
As mentioned in “Section 2 - Software Requirements” on page 11,
MODE
the models in this manual utilize a “generic” type main board, 1. TV must be in standby mode. (Power off).
therefore certain service adjustments settings must be changed or
confirmed when either the main Board, LCD Panel, or TCON Board
2. Access Service Mode by pressing the following buttons
are replaced. on the Remote Commander within a second of each
other:
UPDATING THE SOFTWARE DISPLAY Channel 5 Volume + POWER .
POWER
After replacing the main Board, LCD Panel, or TCON Board, you
MUST UPDATE the SOFTWARE to the latest version. .
DISPLAY
VOLUME+
RM-YD064
KDL-32EX427/32EX527/40EX527/46EX527 50
SECTION 7 - SERVICE ADJUSTMENTS
3. The DIGITAL Service Menu displays. VIEWING OR CHANGING SERVICE DATA
NOTE: There are 3 Service Menus for this model,
Within each Service Menu are Categories and data information.
DIGITAL, CHASSIS, and VPC. If the DIGITAL Service
Menu is not displayed, press JUMP or OPTIONS on the Category Name
Remote Commander.
KDL-32EX427/32EX527/40EX527/46EX527 51
SECTION 7 - SERVICE ADJUSTMENTS
VERIFYING SERVICE ADJUSTMENTS 3. Press 2 to move to the 002 MODEL category.
The following procedures should be perfomed after updating the DIGITAL SERVICE
software to ensure that the service adjustment data is accurate. 002 MODEL
000 SEG I1_I5
●● Verify the Segment Code
<MAIN> <EXT>
DM1.301W00AA RF:01.05
WF1.003W00AA WF:2.0.0.99 DIGITAL SERVICE
DF1.001W00AA
YM1.010W00AA
WF:0B
CAN:X.XXX
002 MODEL
DB2.105W00AA FDlXXXX 001 DEST LTN/ATSC
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA <PEM>
MID:1C117081 PM1.012W00LU
PID:0402000 PB1.000W00LU
PNL:LTY400HM0801 PL1.011J46LUX
POP:X.XXX PD1.011J46LUX
KDL-32EX427/32EX527/40EX527/46EX527 52
SECTION 7 - SERVICE ADJUSTMENTS
7. Using the table, press 3 to increase the data value or 12. To exit service mode, press HOME or turn the TV
6 to decrease the data value, to select the correct power off.
destination of the TV.
DESTINATION DATA VALUE
OPTIONAL ADJUSTMENTS
COLUMBIA LTN/ATSC All Sony TVs are set for optimal viewing perforrmance. Refer to the
CAUTION: Verify the DESTINATION is set correctly following instructions if the customer requests additonal adjustments.
before proceeding to the next step. If another
destination Data Value is selected, it may possibly SETTING WHITE BALANCE ADJUSTMENTS
corrupt the software which would require a main Board White Balance adjustment data is located on the Digital Service
replacement. Menu.
8. Proceed to “Verifying the Model Name”.
1. TV must be in Standby Mode. (POWER off).
VERIFYING THE MODEL NAME 2. Press the following buttons on the Remote Commander
within a second of each other:
The correct model may need to be selected after updating the
DISPLAY Channel 5 Volume +
software.
POWER .
9. Press 1 to move to the 002 MODEL item.
DIGITAL SERVICE
KDL-32EX427/32EX527/40EX527/46EX527 53
SECTION 7 - SERVICE ADJUSTMENTS
RESETTING THE TV TO FACTORY
VPC SERVICE
000 DATA_COPY CONDITION
000 BU_TRANS 0
Use the following instructions to restore the User Adjustments and
Channel Memory settings to the preset factory conditions.
4. Press 2 to move to “006 WB” Category. 1. While holding down the on the Remote Commander,
press the POWER button on the TV Switch Unit of the
VPC SERVICE set.
006 WB
2. The set restarts and displays the Initial Setup screen.
000 R_DRV 128
This may take several minutes.
KDL-32EX427/32EX527/40EX527/46EX527 54
SECTION 7 - SERVICE ADJUSTMENTS
RESETTING THE TV TO FACTORY CONDITION
USING SERVICE MODE
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY Channel 5 Volume + POWER .
3. If necessary, press JUMP or OPTIONS to go to DIGITAL
mode.
4. Press 8 .
“SERVICE” changes to green RST.
5. Press MUTING .
RST executes the command and displays EXE.
6. Press 0 .
EXE-RST displays green, then red indicating the TV is
writing the data.
When the process is complete the green SERVICE text
displays and the LED display as shown below:
KDL-32EX427/32EX527/40EX527/46EX527 55
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved
Sony Corporation English
Sony Technology Center 2011BJ74WEB-1
Technical Services Printed in USA
9-888-394-01 Service Publication Department © 2011.2
KDL-32EX427/32EX527/40EX527/46EX527 56
APPENDIX A - REMOVING THE REAR COVER
REMOVING THE POWER CORD FROM THE KDL-32EX427/32EX527 ONLY
REAR COVER 1. Using the instructions provided in the “Rear Cover and
AC Cover Removal” on page 43, remove the screws from
The AC Power Cord is connected to the Power Supply board and the Rear Cover.
then routed out through the Rear Cover. When removing the Rear 2. Remove 1 screw from AC Cover.
Cover use caution to avoid pulling the AC Power Cord which may 3. Gently start to lift the Rear Cover to detach it from the
damage the cord. Bezel.
Caution: These instructions should be followed whenever
removing the Rear Cover.
KDL-32EX427/32EX527/40EX527/46EX527 A-1
APPENDIX A - REMOVING THE REAR COVER
4. Continue pulling the Rear Cover up from the Bezel one 6. Disconnect the AC Power Cord to detach from Power
section at a time. Supply Board.
KDL-32EX427/32EX527/40EX527/46EX527 A-2
APPENDIX A - REMOVING THE REAR COVER
KDL-40EX527 ONLY 5. Lift up Rear Cover with AC Cover and AC Power Cord
1. Using the instructions provided in the “Rear Cover and attached.
AC Cover Removal” on page 43, remove the screws from NOTE: Hold AC Power Cord while lifting up Rear
the Rear Cover. Cover. Do not pull the AC Power Cord or damage the
2. Remove 1 screw from AC Cover. connector on the Power Board.
3. Gently start to lift the Rear Cover to detach it from the
Bezel.
KDL-32EX427/32EX527/40EX527/46EX527 A-3
APPENDIX A - REMOVING THE REAR COVER
7. Release the clips on the inside of the rear cover to KDL-46EX527 ONLY
detach the AC Cover. 1. Using the instructions provided in the “Rear Cover and
AC Cover Removal” on page 43, remove the screws from
the Rear Cover.
2. Remove 1 screw from AC Cover.
3. Gently start to lift the Rear Cover to detach it from the
Bezel.
KDL-32EX427/32EX527/40EX527/46EX527 A-4
APPENDIX A - REMOVING THE REAR COVER
5. Use care when lifting the Rear Cover from the Bezel by 7. Disconnect the AC Power Cord to detach from Power
the Terminal Area. Supply Board.
HINT: Support the Rear Cover by placing your hand
above the screw hole on the Rear Cover.
KDL-32EX427/32EX527/40EX527/46EX527 A-5
APPENDIX B - REPLACING THE LCD PANEL
REMOVING THE LCD PANEL FROM THE NOTE: A flat head screw driver can be used to remove
the brackets.
BEZEL
The LCD Panel is adhered to the Bezel using double sided tape.
When replacing the panel, you should also replace the tape.
KDL-32EX427/32EX527/40EX527/46EX527 B-1
APPENDIX B - REPLACING THE LCD PANEL
bezel, gently start to lift the panel away from the bezel. REATTACHING THE LCD PANEL ONTO
Lift up by THE BEZEL
holding the
portion of The double-sided tape used to adhere the LCD Panel to the Bezel
the panel. should be replace whenever the panel or the bezel is replaced.
DO NOT
1. Place the replacement bezel face down on a soft cloth.
hold onto
the LCD cells 2. Ensure that all of the original tape has been removed
from the LCD panel and the bezel.
KDL-32EX427/32EX527/40EX527/46EX527 B-2
APPENDIX B - REPLACING THE LCD PANEL
3. Using the following illustrations, place the double-sided 4. Place the top of the LCD Panel onto the bezel.
tape onto the bezel. a. Adjust the right and left side so the panel fits
securely onto the bezel.
32” b. Slowly place the bottom of the panel within the
bezel.
46”
KDL-32EX427/32EX527/40EX527/46EX527 B-3
APPENDIX C - SETUP GUIDE
The Setup Guides (Operating Instructions) are the documents that are included with the television. Sony’s BRAVIA TVs now come with an
on-screen i-Manual. To learn more about the TVs features access the i-Manual using the customers remote control.
KDL-32EX427/32EX527/40EX527/46EX527 C-1
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS01COV.fm
4-273-010-31(1)
Configuración de la red
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS02REG.fm
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS02REG.fm
(Continúa) 3
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS02REG.fm
El siguiente cuadro muestra los formatos de video de alta definición (HD) y los de
definición estándar (SD) compatibles con las entradas de TV de su BRAVIA.
*1 576i, 576p: no disponible con los modelos de las series EX727, EX527, EX427 y CX527.
*2 Para los formatos de PC compatibles, consulte i-Manual.
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS02REG.fm
(Continúa) 5
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS02REG.fm
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS02REG.fm
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS01TOC.fm
Tabla de contenido
Inicio
Verificación de los accesorios................................................................................... 10
Colocación de pilas en el control remoto .................................................................. 10
Antes de configurar su TV......................................................................................... 11
1: Instalación del soporte de sobremesa .................................................................. 12
2: Ajuste del ángulo de visión del TV ........................................................................ 13
3: Conexión del TV.................................................................................................... 14
4: Fijación del TV ...................................................................................................... 17
5: Organización del cable de alimentación de ca/Agrupación de los cables ............ 18
6: Ejecución de la Configuración inicial..................................................................... 19
Uso de un soporte de montaje mural ........................................................................ 20
Instalación del TV en una pared o en un lugar cerrado ............................................ 21
Uso de su TV BRAVIA
Ver TV ....................................................................................................................... 22
Selección de funciones y configuraciones diversas (menú principal) ....................... 24
Desplegado del Manual de instrucciones (i-Manual) ................................................ 26
Configuración de la red
Preparación de una red por cable............................................................................. 28
Preparación de una LAN inalámbrica ....................................................................... 28
Configuración de la conexión a Internet.................................................................... 29
Si no se puede conectar a Internet ........................................................................... 31
Ajuste de las configuraciones de despliegue de servidores ..................................... 31
Información adicional
Solución de problemas.............................................................................................. 33
Especificaciones ....................................................................................................... 35
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS01TOC.fm
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS03STU.fm
Inicio
10
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS03STU.fm
Inicio
daño.
(Continúa) 11
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS03STU.fm
Transmisor síncrono
3D ~
(sólo KDL-55/46/40/ • Alinee el TV desde la parte superior, deslícelo
32EX72x)
Sensor de presencia hacia adentro hasta que no se puedan ver los
pasadores guía.
Pasado-
res guía
~
• Si utiliza un destornillador eléctrico, defina la
fuerza de torsion a aproximadamente 1,5 N·m
{15 kgf·cm}.
12
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS03STU.fm
Inicio
coloque la cara de la pantalla hacia abajo sobre
una superficie de trabajo firme que sea más B KDL-55/46/40/32EX72x, KDL-46EX52x
grande que el TV. y KDL-40/32CX52x
• Para no dañar la superficie de la pantalla LCD,
asegúrese de colocar un paño suave sobre la 20° 20°
superficie de trabajo.
• Cuando instale el TV en la pared, retire los 20° 20°
tornillos de la parte posterior del TV. Los
tornillos y el número de tornillos depende del
B KDL-40/32EX52x y KDL-32EX42x
modelo de TV. (Están fijados a los orificios de
los tornillos para el montaje mural.) Asegúrese
de colocar los tornillos que retiró en un lugar 15° 15°
seguro. Manténgalos alejados de los niños.
• Cuando vuelva a instalar el soporte de 15° 15°
sobremesa, asegúrese de fijar los tornillos
(retirados previamente) en los orificios
originales de la parte posterior del TV. Ajuste del ángulo (inclinación)
• Para obtener instrucciones acerca del uso del (excepto KDL-40/32CX52x)
soporte de montaje mural con su TV vaya a
~
http://esupport.sony.com para su modelo de
• Tenga cuidado de no pellizcarse los dedos
televisor y descargue “Información adicional
entre el TV y el soporte cuando ajuste el
sobre cómo usar el suporte de montaje mural”.
ángulo.
B KDL-55/46/40/32EX72x y KDL-46EX52x
0° - 6°
(Continúa) 13
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS03STU.fm
B KDL-40/32EX52x y KDL-32EX42x
3: Conexión del TV
0°
Se muestra un decodificador con
conexión HDMI
6°
Decodificador
1,5 mm máx.
(Ilustración de referencia del enchufe tipo F)
14
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS03STU.fm
Antena
Cable
Inicio
Decodificador
Se muestra con una conexión básica de alta definición (HD) BRAVIA® Sync™
**Conexión
óptica
*Receptor de A/V
*Parte posterior
del TV
*Blu-ray Disc
Decodificador de cable HD
o Receptor satelital HD
SAT
(Plato)
Cable/
Antena
* Significa un dispositivo apto para BRAVIA Sync.
** La conexión óptica solo es necesaria para receptores de A/V que no soportan ARC.
(Continúa) 15
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS03STU.fm
Parte posterior
del TV
Sistema de cine en casa
Blu-ray Disc/DVD
* La conexión óptica solo es necesaria para receptores de A/V que no soportan ARC.
Parte posterior
del TV
PC
Separador
VCR DVD
Combinación de VCR/DVD
Cable/Antena
16
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS03STU.fm
Inicio
lesiones corporales o soportes en ángulo (no suministrado) para
incluso la muerte. fijar la base de soporte. Para cada soporte en
ángulo, utilice el herraje adecuado a fin de:
• Sujetar un lado del soporte en ángulo a la
Medidas para evitar que se pared.
caiga el TV • Sujetar el otro lado a la base de soporte.
• Instale el TV de modo que quede fijo a la Soporte en
pared o base. ángulo
(no
• No permita que los niños jueguen o se suministrado)
cuelguen del mueble o del TV.
• Evite colocar o colgar objetos en el TV. Base de
• No instale nunca el TV en: soporte
– superficies resbaladizas, inestables o
irregulares.
– muebles que pueden utilizarse 2 Fije el TV a la base de soporte.
fácilmente como escalones, como una Utilice los herrajes opcionales que se
cómoda. enumeran a continuación (no suministrado):
• Instale el TV donde no puedan • El tornillo de M4 × 10 mm (atornillado a
deslizarlo, empujarlo o hacerlo caer. la base de soporte de sobremesa del TV).
• Coloque todos los cables de • Un tornillo o elemento similar (sujetado
alimentación ca y cables de conexión de a la base de soporte del TV).
modo que no estén al alcance de los • Cuerda o cadena (lo suficientemente
niños. fuerte para tolerar el peso del TV).
Asegúrese de que no haya demasiada
longitud sobrante de cuerda o cadena.
(Continúa) 17
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS03STU.fm
~
Para obtener el Kit opcional de correa de soporte 5: Organización del cable
Sony, póngase en contacto con nuestro servicio de alimentación de ca/
de soporte al cliente suministrando el nombre del
modelo de su TV. Agrupación de los
• Visite la página de Internet cables
http://esupport.sony.com/ES/LA/
B KDL-40/32CX52x
3 Anclaje de TV a la pared.
Sujete el TV a la pared mediante pernos,
tornillos de anclaje y cadena (o soga).
Tornillos de fijación (M6) (no suministrado)
Cable de
alimentación
de ca
Orificios Cuerda o
de cadena
(no
B Excepto KDL-40/32CX52x
montaje
de la suminis- ~
pared trado) • Antes de agrupar los cables, quite el sujetador
de cables de la cubierta de ca (consulte los
Anclaje (no pasos 1 y 2). Vuelva a utilizar el sujetador de
suministrado) cables (consulte el paso 3) para agrupar los
demás cables (consulte el paso 4).
• No agrupe el cable de alimentación de ca junto
con otros cables.
18
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS03STU.fm
KDL-55/46/40/32EX72x y 6: Ejecución de la
KDL-46EX52x
Configuración inicial
Excepto Para KDL-40/
KDL-40/32CX52x 32CX52x
1 2
3 4
Inicio
KDL-40/32EX52x y KDL-32EX42x
1 2
1 Complete sus conexiones de cables
antes de proceder a la
Configuración inicial.
Conecte el TV al tomacorriente más
3 4 cercano.
2 Presione 1 (power) en el TV. El
* indicador " (power) se iluminará en
verde.
Cuando enciende el TV por primera
vez, aparece el menú Idioma/
Language en la pantalla.
~
* Cuando instale en la pared, coloque el • Cuando enciende el TV por primera vez, el TV
sujetador de cables debajo de las terminales. requiere de cierto procesamiento interno para
optimización antes de que pueda realizar la
configuración inicial. No habrá imagen ni
sonido y el indicador timer en el frente del TV
parpadeará en color naranja durante 40
segundos aproximadamente. No apague el TV
durante este proceso. Este proceso se ha
completado en la fábrica en algunos TV.
(Continúa) 19
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS03STU.fm
20
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS03STU.fm
Inicio
6 cm
10 cm 10 cm
Instalado en la pared
30 cm
10 cm 10 cm
Deje como
mínimo este
10 cm
espacio
alrededor
del TV.
Pared Pared
~
• La ventilación insuficiente puede provocar el
sobrecalentamiento del TV y dañarlo o
producir un incendio.
21
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS04SAF.fm
Uso de su TV BRAVIA
Ver TV
1 Encienda el TV.
Presione 1 (power) en el TV o I/1 en el
control remoto para encender el TV.
(Para el KDL-55/46/40/32EX72x, puede
utilizar el botón I/1 situado en la parte
1 frontal o trasera del control remoto.)
2 Seleccione un canal de TV o
seleccione una entrada.
1 o
2
Para utilizar los botones 0-9
Por ejemplo, para introducir 2.1, presione
, y .
0-9
22
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS04SAF.fm
Uso de su TV BRAVIA
Despliega el BRAVIA Sync Menu para operar
el equipo compatible con BRAVIA Sync que
esté conectado al TV.
4 F/f/G/g/
Mueve el cursor en pantalla y confirma el
elemento.
5 OPTIONS
Despliega una lista de funciones convenientes y
accesos directos a los menús. Los elementos del
menú varían en función de la entrada
seleccionada y/o contenido.
6 Botones de color
Cuando están disponibles los botones de color,
Para KDL-55/46/40/32EX72x
aparece en la pantalla una guía de funciones.
7 Botones CH +/–/Números
Selecciona canales en el modo de TV.
8 VOL/2 +/–
Ajusta el volumen.
23
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS04SAF.fm
1 Presione HOME.
2
1, 3
Para seleccionar elementos en el
menú principal (p. ej., para seleccionar
“Ajustes”)
1 Presione G/g para seleccionar
Ajustes.
El contenido de Ajustes se despliega
en el lado derecho.
2 Presione F/f para seleccionar
Imagen y pantalla.
3 Presione para activar el menú.
Según la instrucción de la pantalla,
presione F/f/G/g para seleccionar
elementos y presione para
confirmar.
24
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS04SAF.fm
Uso de su TV BRAVIA
Favoritos/Historial Proporciona un acceso rápido a sus elementos
utilizados frecuentemente y vistos recientemente,
tales como canales de TV, entradas externas o sus
archivos multimedia.
Ajustes Contiene todas las configuraciones necesarias para
personalizar sus ajustes de TV.
Widgets Aplicaciones de Internet descargables que ofrecen
fácil acceso a contenido interactivo (se requiere una
conexión al internet).
Aplicaciones Puede disfrutar de diversas aplicaciones tales como
Buscador de música, Navegador de
Internet, etc.
Qriocity Proporciona acceso al servicio en línea Qriocity.
25
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS04SAF.fm
1 Presione i-MANUAL.
1
2 Presione F/f/G/g/ para navegar y
seleccionar elementos.
2
Para seleccionar elementos en el
i-Manual
1 Presione F/f para seleccionar un
elemento.
El contenido se despliega a la derecha
como la segunda capa.
2 Presione g para moverse hacia la
segunda capa.
3 Presione F/f para seleccionar un
elemento de la segunda capa.
En el lado derecho se despliega una
descripción del elemento.
Si está disponible una tercera capa,
repita este paso para desplegar más
información.
4 Presione g para seleccionar un
elemento.
Se despliega el contenido.
26
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS04SAF.fm
Uso de su TV BRAVIA
Para utilizar el marcador de páginas
El i-Manual tiene una función para marcar páginas. Las páginas se pueden marcar con los
botones de color, de acuerdo a las instrucciones que aparecen en la parte inferior de la
pantalla. Para tener acceso a sus marcadores registrados, avance hasta la página principal del
i-Manual y seleccione Marcadores.
~
• La memoria de la última página se restablece automáticamente cuando cambia el TV al modo de
espera.
27
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS05OVR.fm
Configuración de la red
Cuando conecte este TV a Internet, podrá
disfrutar de múltiples funciones: desplegar Preparación de una LAN
una fotografía que muestra su ubicación en inalámbrica
el mapa, disfrutar de video de Internet, etc.
Para más información acerca de las La LAN inalámbrica incorporada en
funciones, refiérase al i-Manual. algunas TVs le permite accesar fácilmente a
Internet y a su red de hogar con el adaptador
~
USB para LAN inalámbrica UWA-BR100
• Para conectarse a Internet necesitará contratar
a un proveedor de servicios de Internet. (a partir de Enero de 2010). Al insertar el
adaptador USB para LAN inalámbrica en el
puerto USB de su TV, podrá fácilmente
crear una red sin cables. Antes de configurar
Preparación de una red la función de LAN inalámbrica del TV,
por cable asegúrese de configurar un ruteador de LAN
inalámbrica.
Internet
Módem
con
funciones
de
o
ruteador
LAN
TV
Ruteador
~
• Dependiendo del modelo de su TV, está
Módem disponible el adaptador USB para LAN
inalámbrica como un accesorio opcional.
Internet
~
• Para conexiones de LAN, utilice un cable de
categoría 7 (no se suministra).
28
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS05OVR.fm
Configuración de la red
¿LAN inalámbrica segura? Para propósitos de seguridad, el
k Tipo 3
WPS (PIN) proporciona un código de PIN
SI m para su ruteador. El código de PIN se
renueva cada vez que se selecciona WPS
¿Utiliza un ruteador de LAN NO (PIN).
inalámbrica compatible con k Tipo 2
Configuración Wi-Fi
protegida (WPS)?
1 Presione HOME, luego seleccione
> Red > Configuración de la
SI m red.
Tipo 1*
2 Seleccione Configuración
LAN por cable , Tipo 4 inalámbrica.
(Continúa) 29
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS05OVR.fm
30
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS05OVR.fm
Configuración de la red
1 Presione HOME, luego seleccione
minutos. No se puede cancelar el
> Red > Configuración de la
red. diagnóstico después de haber
seleccionado Verifique la
2 Seleccione Configuración por Conexión.
cable.
3 Seleccione Auto para establecer
automáticamente una dirección IP y Ajuste de las
un proxy (servidor que reside entre configuraciones de
aplicaciones de cliente) o seleccione despliegue de servidores
Personalizar para establecerlas
manualmente. En el menú principal se pueden seleccionar
los servidores de red de hogar que se
4 Siga las instrucciones en la pantalla desplegarán. En el menú principal se
de configuración. pueden desplegar automáticamente hasta 10
servidores.
(Continúa) 31
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS05OVR.fm
32
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS06OPT.fm
Información adicional
Solución de problemas
Cuando el indicador 1 (en espera) esté parpadeando, cuente cuántas veces
parpadea (el intervalo de tiempo es tres segundos).
Presione 1 (power) en el TV para apagarlo, desconecte el cable de alimentación de ca y
póngase en contacto con el Centro de asistencia de Sony (información suministrada en la
portada) para informar sobre cuántas veces parpadea el indicador.
Información adicional
Síntoma Explicación/Solución
No hay imagen ni sonido • Verifique la conexión de la antena o el cable.
(pantalla en negro). • Conecte el TV a la fuente de alimentación de ca y presione
1 (power) en el TV.
• Si el indicador 1 (en espera) se ilumina en rojo, presione
"/1 en el control remoto.
En la pantalla aparecen • La pantalla está compuesta por pixeles. Los pequeños
pequeños puntos negros puntos negros y/o puntos brillantes (pixeles) que aparecen
y/o puntos brillantes. en la pantalla no indican un mal funcionamiento.
Algunos programas no se • Verifique la antena o el plato.
pueden sintonizar.
El TV se apaga • Verifique si las funciones Sleep, Timer o Sin actividad
automáticamente (el TV TV en espera están activadas.
entra en el modo de • Verifique si el Sensor de presencia en Eco está
espera). activado. Cuando no se detecta ningún espectador frente al
TV durante un tiempo preestablecido, la imagen se apaga de
forma automática y sólo se deja encendido el sonido.
Asimismo, después de 30 minutos en el modo sin imagen, el
TV pasa al modo en espera.
El control remoto no • Reemplace las pilas.
funciona. • Es posible que su TV esté en modo SYNC (Sincronización).
Presione SYNC MENU, seleccione Control del TV y
luego seleccione Inicio (Menú) u Opciones para
controlar el TV.
(Continúa) 33
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS06OPT.fm
Síntoma Explicación/Solución
El TV y el área • Cuando el TV se utiliza durante un período de tiempo
circundante suelen prolongado, es posible que el TV y el área circundante se
calentarse. sientan un tanto calientes al tocarlos. Esto no implica un mal
funcionamiento del TV.
Se olvidó la contraseña • Ingrese 4357 para el código de PIN, para los modelos serie
de Bloqueo. EX725/EX525/EX425/CX525. (El código de PIN 4357
siempre es aceptado.)
• En cambio, para los modelos de la serie EX727/EX527/
EX427/CX527, ingrese 9999.
Cuidados de su BRAVIA
La seguridad es muy importante. Por favor lea y respete la documentación de seguridad
(Manual de seguridad) suministrado por separado.
Antes de comenzar a limpiar su TV, desenchufe el TV y
los otros equipos conectados de la fuente de energía.
• Limpie la pantalla de LCD con mucho cuidado
utilizando un paño suave.
• Las manchas difíciles se pueden eliminar con un paño
humedecido en agua tibia y jabón suave.
• Si utiliza un paño previamente tratado con productos químicos, siga las instrucciones del
envase.
• Nunca utilice solventes fuertes como tíner, alcohol o bencina para limpiarlo.
• No vuelva a enchufar el TV hasta que se haya evaporado la humedad del producto.
El TV también se debe colocar sobre una superficie estable para evitar que se caiga
(consulte la página 17). Si viven niños o mascotas en la casa, compruebe con frecuencia si el
TV está correctamente asegurado.
34
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS06OPT.fm
Especificaciones
Sistema
Sistema de TV Análogo:NTSC 3.58 (para modelos series EX727/EX527/EX427/CX527)
NTSC 3.58 / PAL-M / PAL-N (para los modelos series EX725/EX525/EX425/
CX525)
Digital: DVB-T (para los modelos series EX727/EX527/EX427/CX527)
SBTVD (para los modelos series EX725/EX525/EX425/CX525)
Cobertura de canales VHF: 2-13, UHF: 14-69
CATV (Análogo): 1-135
Sistema del panel Panel LCD (pantalla de cristal líquido)
Salida de bocinas 10 W + 10 W
Tomas de entrada/salida
CABLE/ANTENNA Terminal externo de 75 ohms para entrada de señal de radiofrecuencia
(Cable/Antena)
VIDEO IN 1/2 VIDEO / AUDIO
(Entrada de video 1/2)
COMPONENT IN YPBPR (video componente)
Formato de señal: 480i, 480p, 720p, 1080i, 1080p (para los modelos series EX727/EX527/
EX427/CX527)
480i, 480p, 576i, 576p,720p, 1080i, 1080p (para modelos series EX725/
EX525/EX425/CX525)
AUDIO
Información adicional
HDMI IN 1/2/3/4 HDMI: Video: 480i, 480p, 720p, 720/24p/30p, 1080i, 1080p, 1080/24p/30p (para los
(Entrada HDMI 1/2/3/4) modelos series EX727/EX527/EX427/CX527)
480i, 480p, 576i, 576p, 720p, 720/24p/30p, 1080i, 1080p, 1080/24p/30p
(para modelos series EX725/EX525/EX425/CX525)
HDMI: Audio: PCM lineal de dos canales 32, 44,1 y 48 kHz, 16, 20 y 24 bits, Dolby Digital
Entrada de audio analógico (minitoma) (solo HDMI IN 4)
ARC (solo HDMI IN 1)
AUDIO OUT (Salida de audio)/ 500 mV rms (típico)
Auriculares Minitoma estéreo
DIGITAL AUDIO OUT Señal de audio óptica digital PCM/Dolby Digital
(OPTICAL)
PC IN (Entrada de PC) Subminiatura D de 15 contactos, RGB analógico
PC/HDMI 4 AUDIO IN Minitoma estéreo
(Entrada de audio de PC/HDMI)
LAN Conector 10BASE-T/100BASE-TX (La velocidad de la conexión podría variar en función
del entorno de red. No se garantizan la tasa de comunicación ni la calidad de comunicación
10BASE-T/100BASE-TX para este TV.)
USB/DLNA Consulte el i-Manual para el formato compatible.
(Continúa) 35
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
D:\Cmeng's JOB\SONY TV\SY0265_W2\4273010311_LS\LS06OPT.fm
36
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)
Para su conveniencia
Registre su televisor en:
Registro en http://esupport.sony.com/LA/perl/registration.pl
línea:
Su televisor puede recibir actualizaciones de software.
Actualizaciones Si desea conocer la información más reciente sobre
de software: actualizaciones de software para su televisor, visite:
http://esupport.sony.com/LA/
Información de licencias
Macintosh es una marca comercial de Apple Inc., registrada en EE. UU. y otros países.
HDMI, el logotipo de HDMI y High-Definition Multimedia Interface son marcas comerciales o marcas comerciales registradas de HDMI
Licensing, LLC. en EE. UU. y en otros países.
Fergason Patent Properties, LLC:
Nº de patente de EE. UU. 5.717.422
Nº de patente de EE. UU. 6.816.141
Fabricado bajo licencia de Dolby Laboratories. Dolby y el símbolo de la doble D son marcas comerciales de Dolby Laboratories.
Blu-ray Disc es una marca comercial.
“BRAVIA” y , S-Force, Motionflow, BRAVIA Sync y son marcas comerciales o marcas registradas de Sony Corporation.
“PlayStation” es una marca comercial registrada y “PS3” es una marca comercial de Sony Computer Entertainment Inc.
DLNA®, el logotipo de DLNA y DLNA CERTIFIED® son marcas comerciales, marcas de servicio o marcas de certificación de Digital Living
Network Alliance.
TrackID es una marca comercial o una marca comercial registrada de Sony Ericsson Mobile Communications AB.
La tecnología de reconocimiento de música y video y la información relacionada es proporcionada por Gracenote®. Gracenote es el estándar de
la industria para la tecnología de reconocimiento de música y para la distribución del contenido relacionado. Para información adicional, visite
www.gracenote.com.
CD, DVD, Blu-ray Disc y la información relacionada con música y video a partir de Gracenote, Inc., derechos de autor © 2000-actualmente es
Gracenote. Software Gracenote, derechos de autor © 2000-actualmente es Gracenote. Para este producto y servicio se aplican una o más patentes
propiedad de Gracenote. Consulte el sitio web de Gracenote para ver una lista parcial de las patentes pertinentes de Gracenote. Gracenote, CDDB,
MusicID, MediaVOCS, el logotipo de Gracenote y el símbolo impreso, y el logotipo “Powered by Gracenote” son marcas comerciales registradas
o marcas comerciales de Gracenote en EE. UU. y en otros países.
KDL-EX727/EX725/EX527/EX525/EX427/EX425/CX527/CX525
4-273-010-31(1)