The document provides procedures for removing and installing an A50/A50B audio control panel from an aircraft. It lists the necessary tools, outlines the step-by-step removal process which includes setting switches to off and unscrewing the panel, and the installation process which is largely the reverse, ensuring the panel is securely in place and testing operation. It was produced by students at the Indonesian Flight Engineering Polytechnic for an aircraft hangar.
The document provides procedures for removing and installing an A50/A50B audio control panel from an aircraft. It lists the necessary tools, outlines the step-by-step removal process which includes setting switches to off and unscrewing the panel, and the installation process which is largely the reverse, ensuring the panel is securely in place and testing operation. It was produced by students at the Indonesian Flight Engineering Polytechnic for an aircraft hangar.
The document provides procedures for removing and installing an A50/A50B audio control panel from an aircraft. It lists the necessary tools, outlines the step-by-step removal process which includes setting switches to off and unscrewing the panel, and the installation process which is largely the reverse, ensuring the panel is securely in place and testing operation. It was produced by students at the Indonesian Flight Engineering Polytechnic for an aircraft hangar.
JUAN THREEAS VAHLEVI (11) MOHAMMAD IKHLASUL AMAL (14) MUHAMMAD LUTHFI (16) MUHAMMAD RIVALDI RIZKY WIJAYA (15) MUHAMMAD RIZKY HARAHAP (17)
PROGRAM STUDI TEKNIK PESAWAT UDARA 12 DELTA
JURUSAN TEKNIK PENERBANGAN POLITEKNIK PENERBANGAN INDONESIA CURUG – TANGERANG 2020 A50/A50B AUDIO CONTROL PANEL REMOVAL/ INSTALLATION
1. REMOVAL OF A50/ A50B AUDIO CONTROL PANEL
A. Tools and consumable materials - Allen Wrench box Z00. N6045297270 B. Procedure
NO PROCEDURE TIME NOTE SIGN
1 Make sure the “SOURCE” selector is set to “OFF” 2 Make sure the “RADIO MASTER” switch is set to “OFF” 3 Inster a 3/32-inch Allen Wrench into hole (2) 4 Unscrew the locking system untik audio control panel (1) clears from it rack 5 Extract the audio control panel from it rack ELECTRICAL POWER REPORT INSPECTION/ CHECK 2. INSTALLATION OF A50/ A50B AUDIO CONTROL PANEL A. Tools and consumable materials - Allen Wrench box Z00. N6045297270 B. Procedure
NO PROCEDURE TIME NOTE SIGN
1 Make sure the “SOURCE” selector is set to “OFF” 2 Make sure the “RADIO MASTER” switch is set to “OFF” 3 Check the pins of the rack connector for condition 4 Insert audio control panel (1) in its rack until the locking screw on the back of the panel contacts the rack bottom 5 Screw the locking system a 3/32-inch Allen Wrench into hole (2). Do not overtighten. 6 Check audio control panel - for security in its rack 7 Make sure all the tools and materials are removed and the work area is clean and free from debris 8 Perform an operational test - of the system
Ergonomics Problems in Process Operations: Organised by the Institution of Chemical Engineers in Association with the Ergonomics Society. Held at the University of Aston in Birmingham, 11-13 July 1984