Professional Documents
Culture Documents
PAGE 1 OF 2
1.0 SCOPE :
The Information on this document is the property of BHARAT HEAVY ELECTRICALS LIMITED
This standard covers the dimensions and other requirements for Engineer's,
It must not be used directly or Indirectly in any way detrimental to the Interest of the company.
3.0 MATERIAL:
Tool steel 118 T3 or 133T3 as stated in IS:3748 or a suitable alloy steel.
4.0 Hardness:
The hardness of the cutting portion of files shall be 745 HV (≈ 62 HRC), min.
APPROVED :
Revisions : INTERPLANT STANDARDIZATION
Cl. 30.5.46 of MOM of WG-T00LS COMMITTEE (WG-TOOLS)