Professional Documents
Culture Documents
Jet Brazing Fittings PDF
Jet Brazing Fittings PDF
Manufactured to:
BS EN �254-�:�998 Part � Specification for copper and copper alloy fittings with capillary ends
for soldering and brazing for use with copper tubes.
BS EN �254-�:�998 Part 5 Specification for copper and copper alloy fittings with short ends
for capillary brazing for use with copper tubes.
Specific Benefits Include:
All fittings supplied contain less than �00mg/m2 (0.0�mg/cm2) of hydrocarbons on the
degreased surface. Each fitting is engraved with unique branding together with the EN spec
and fitting size where space permits. All sealed in protective polythene bags and are product
labelled.
Fittings are supplied in reinforced cardboard boxes, labelled with product information and
outline drawing of fitting. Each fitting is engraved with unique branding, space permitting.
54mm sample
Service Temperature*
Size Min -�96° C 65° C �20° C �50° C Max 200° C
67mm �8.6 bar �8.6 bar �7.5 bar �4.0 bar 6.9 bar
76mm �8.6 bar �8.6 bar �7.5 bar �4.0 bar 6.9 bar
�08mm �7.2 bar �7.2 bar �6.2 bar �2.9 bar 6.4 bar
�33mm �0.5 bar �0.5 bar 8.5 bar 7.7 bar 4.� bar
�59mm ��.7 bar ��.7 bar 9.7 bar 8.6 bar 4.6 bar
* Max hydraulic working pressure for Jet Brazing fittings when assembled with Lawton Tube’s EN�057 copper tube using hard solder (brazing alloy) to EN �044
Mechanical Properties
EN�057 Copper end feed fitting
67 65 58 28.5 67 65 28.5
76 68 7� 32 76 68 32
�08 ��0 ��3 60 �08 ��0 60
�33 280 280 235 �33 280 235
�59 335 335 290 �59 335 290
Elbow 90° - FF Equal Tee - FFF
67 83.5 50 a 67 a 78 42
Za Za
76 9�.5 58 76 80 46
�08 �27 79.5 �08 ��2 64
�33 �27 79.5 �33 c �35 85c
�59 �60 �00 �59 �60 �00
a
Za
Za
c a
Street Elbow 90° - MF Straight Male Adaptor
Dimensions (mm)
d a
67 33.5
76 33.5
�08 47.5
PJETBRAZPDF��/�6
�59 62.5